Skip to contentSkip to conversation

Oops in pl2303 driver

DISCUSSION Tony Hoyle 3 participants 6 messages Aug 31, 2002 – Sep 9, 2002

lore
Share & tools
lore

Tony Hoyle

author
#0 lore raw

I've just acquired a USB datacable for my phone which appears to have a PL2303 chipset in it (at least that's what hotplug loaded when I plugged it in). However this driver doesn't appear to work... No data is transferred and when the software (gnokii) gives up I get an oops:

Aug 31 20:05:31 spock kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000014
Aug 31 20:05:31 spock kernel: d48a1344
Aug 31 20:05:31 spock kernel: *pde = 0d5e3067
Aug 31 20:05:31 spock kernel: Oops: 0000
Aug 31 20:05:31 spock kernel: CPU:    0
Aug 31 20:05:31 spock kernel: EIP: 0010:[usbmouse:__insmod_usbmouse_O/lib/modules/2.4.20-pre5/kernel/drivers/+-302268/96] 
   Not tainted
Aug 31 20:05:31 spock kernel: EFLAGS: 00010006
Aug 31 20:05:31 spock kernel: eax: cef18000   ebx: ffffff8d   ecx: cef8b400   edx: 00000000
Aug 31 20:05:31 spock kernel: esi: cee98c40   edi: 00000000   ebp: 00000246   esp: c57c3e48
Aug 31 20:05:31 spock kernel: ds: 0018   es: 0018   ss: 0018
Aug 31 20:05:31 spock kernel: Process xgnokii (pid: 760, stackpage=c57c3000)
Aug 31 20:05:31 spock kernel: Stack: ffffff8d cee98c40 00000000 00000282 d48a2b10 cee98c40 cee98c44 cee98c40
Aug 31 20:05:31 spock kernel:        00000286 cf0371c0 00000001 00000000 cef18200 cf09826c d48a1fe2 cee98c40
Aug 31 20:05:31 spock kernel:        cef8b478 cef8b420 ffffffff cef8b400 cf09826c d4891146 cee98c40 d48e5fb9
Aug 31 20:05:31 spock kernel: Call Trace: [usbmouse:__insmod_usbmouse_O/lib/modules/2.4.20-pre5/kernel/drivers/+-296176/96] [usbmouse:__insmod_usbmouse_O/lib/modules/2.4.20-pre5/kernel/drivers/+-299038/96] [usbmouse:__insmod_usbmouse_O/lib/modules/2.4.20-pre5/kernel/drivers/+-368314/96] [usbmouse:__insmod_usbmouse_O/lib/modules/2.4.20-pre5/kernel/drivers/+-20551/96] [usbmouse:__insmod_usbmouse_O/lib/modules/2.4.20-pre5/kernel/drivers/+-43801/96]
Aug 31 20:05:31 spock kernel: Code: 8b 52 14 8b 42 e8 8b 7a ec 25 00 00 00 2f 0d 00 00 80 01 89
Quoted 4 lines
Quoted 4 lines

eax; cef18000 <_end+ec4ecbc/14587d1c>
ecx; cef8b400 <_end+ecc20bc/14587d1c>
esi; cee98c40 <_end+ebcf8fc/14587d1c>
esp; c57c3e48 <_end+54fab04/14587d1c>

Code; 00000000 Before first symbol
00000000 <_EIP>:
Code; 00000000 Before first symbol
0: 8b 52 14 mov 0x14(%edx),%edx
Code; 00000003 Before first symbol
3: 8b 42 e8 mov 0xffffffe8(%edx),%eax
Code; 00000006 Before first symbol
6: 8b 7a ec mov 0xffffffec(%edx),%edi
Code; 00000009 Before first symbol
9: 25 00 00 00 2f and $0x2f000000,%eax
Code; 0000000e Before first symbol
e: 0d 00 00 80 01 or $0x1800000,%eax
Code; 00000013 Before first symbol
13: 89 00 mov %eax,(%eax)

1 warning issued. Results may not be reliable.

spock:/home/tmh# lsmod
Module                  Size  Used by    Not tainted
soundcore               3556   0  (autoclean)
nfsd                   68208   8  (autoclean)
mousedev                3828   2
hid                    19332   0  (unused)
usbmouse                1812   0  (unused)
input                   3360   0  [mousedev hid usbmouse]
pl2303                 10424   1
usbserial              16188   0  [pl2303]
serial                 42404   0  (autoclean)
nfs                    64120   1  (autoclean)
lockd                  48688   1  (autoclean) [nfsd nfs]
sunrpc                 59932   1  (autoclean) [nfsd nfs lockd]
uhci                   24048   0  (unused)
usbcore                56480   1  [hid usbmouse pl2303 usbserial uhci]
raw1394                 6584   0  (unused)
ieee1394               30412   0  [raw1394]
radeon                 93760  15
agpgart                15060   3

Simply using 'cat /dev/ttyUSB0' seems to be enough to cause the oops, so it's definately the driver rather than the software.

Tony

#1 lore raw
Quoted 5 lines · Tony Hoyle

I've just acquired a USB datacable for my phone which appears to have a PL2303 chipset in it (at least that's what hotplug loaded when I plugged it in). However this driver doesn't appear to work... No data is transferred and when the software (gnokii) gives up I get an oops:

Quoted 8 lines
Aug 31 20:05:31 spock kernel: Unable to handle kernel NULL pointer 
dereference at virtual address 00000014
Aug 31 20:05:31 spock kernel: d48a1344
Aug 31 20:05:31 spock kernel: *pde = 0d5e3067
Aug 31 20:05:31 spock kernel: Oops: 0000
Aug 31 20:05:31 spock kernel: CPU:    0
Aug 31 20:05:31 spock kernel: EIP: 

0010:[usbmouse:__insmod_usbmouse_O/lib/modules/2.4.20-pre5/kernel/drivers/+-302268/96]

I'm guessing thie is 2.4.20-pre5? If so can you try the following two patches that I just sent off to Marcelo:

	http://www.kernel.org/pub/linux/kernel/people/gregkh/usb/2.4/usb-usbserial-2.4.20-pre5.patch
and
	http://www.kernel.org/pub/linux/kernel/people/gregkh/usb/2.4/usb-pl2303-2.4.20-pre5.patch

and let me know if that solves the problem for you or not?

thanks,

greg k-h

author
#2 lore raw
Quoted 10 lines · Greg KH

I'm guessing thie is 2.4.20-pre5? If so can you try the following two patches that I just sent off to Marcelo:

	http://www.kernel.org/pub/linux/kernel/people/gregkh/usb/2.4/usb-usbserial-2.4.20-pre5.patch
and
	http://www.kernel.org/pub/linux/kernel/people/gregkh/usb/2.4/usb-pl2303-2.4.20-pre5.patch

and let me know if that solves the problem for you or not?

No change (new oops appended... looks the same as the old one basically)

I also tried 2.5.32 and got exactly the same oops.

To reproduce... type 'cat /dev/ttyUSB0' and hit control-C.

I have tried removing all modules except the USB serial related ones and get exactly the same, so I think the references to 'mousedev' are bogus in the oops (the taint is from the VMWare modules but I get the same without them so I don't think they're affecting anything).

Tony

Sep  1 22:04:49 spock kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000014
Sep  1 22:04:49 spock kernel: d48a1344
Sep  1 22:04:49 spock kernel: *pde = 00000000
Sep  1 22:04:49 spock kernel: Oops: 0000
Sep  1 22:04:49 spock kernel: CPU:    0
Sep  1 22:04:49 spock kernel: EIP: 0010:[mousedev:__insmod_mousedev_O/lib/modules/2.4.20-pre5/kernel/drivers/+-298172/96] 
   Tainted: PF
Sep  1 22:04:49 spock kernel: EFLAGS: 00010087
Sep  1 22:04:49 spock kernel: eax: cf63b000   ebx: 00000000   ecx: cf4ebc00   edx: 00000000
Sep  1 22:04:49 spock kernel: esi: cf7ad440   edi: 00000000   ebp: 00000246   esp: ce45bd80
Sep  1 22:04:49 spock kernel: ds: 0018   es: 0018   ss: 0018
Sep  1 22:04:49 spock kernel: Process cat (pid: 912, stackpage=ce45b000)
Sep  1 22:04:49 spock kernel: Stack: 00000000 cf7ad440 00000000 00000282 d48a2b10 cf7ad440 cf7ad444 cf7ad440
Sep  1 22:04:49 spock kernel:        00000286 cf7021c0 00000001 00000000 ce731400 cf70826c d48a1fe2 cf7ad440
Sep  1 22:04:49 spock kernel:        cf4ebc00 ffffffff cf4ebc1c cf4ebc00 cf70826c d4891146 cf7ad440 d4920f39
Sep  1 22:04:49 spock kernel: Call Trace: [mousedev:__insmod_mousedev_O/lib/modules/2.4.20-pre5/kernel/drivers/+-292080/96] [mousedev:__insmod_mousedev_O/lib/modules/2.4.20-pre5/kernel/drivers/+-294942/96] [mousedev:__insmod_mousedev_O/lib/modules/2.4.20-pre5/kernel/drivers/+-364218/96] [<d4920f39>] [<d491a36f>]
Sep  1 22:04:49 spock kernel:   [<d491a42b>] [release_dev+576/1232] [__free_pages+27/32] [free_page_and_swap_cache+51/64] [__free_pte+64/80] [zap_page_range+403/576]
Sep  1 22:04:49 spock kernel: Code: 8b 52 14 8b 42 e8 8b 7a ec 25 00 00 00 2f 0d 00 00 80 01 89
Quoted 4 lines
Quoted 4 lines

eax; cf63b000 <_end+f371cbc/14587d1c>
ecx; cf4ebc00 <_end+f2228bc/14587d1c>
esi; cf7ad440 <_end+f4e40fc/14587d1c>
esp; ce45bd80 <_end+e192a3c/14587d1c>

Trace; d491a42b <[parport_pc]__module_parm_verbose_probing+4cd/9fa>

Code; 00000000 Before first symbol
00000000 <_EIP>:
Code; 00000000 Before first symbol
0: 8b 52 14 mov 0x14(%edx),%edx
Code; 00000003 Before first symbol
3: 8b 42 e8 mov 0xffffffe8(%edx),%eax
Code; 00000006 Before first symbol
6: 8b 7a ec mov 0xffffffec(%edx),%edi
Code; 00000009 Before first symbol
9: 25 00 00 00 2f and $0x2f000000,%eax
Code; 0000000e Before first symbol
e: 0d 00 00 80 01 or $0x1800000,%eax
Code; 00000013 Before first symbol
13: 89 00 mov %eax,(%eax)

author
#3 lore raw
In reply to Greg KH

A clue perhaps? I switch from the uhci to the usb-uhci driver and the oops stopped happening (there were a couple of make mrproper/rebuilds in between too).

Tony

#4 lore raw
Quoted 3 lines · Tony Hoyle

A clue perhaps? I switch from the uhci to the usb-uhci driver and the oops stopped happening (there were a couple of make mrproper/rebuilds in between too).

That makes me very suspicious. If you can reproduce it with the uhci driver again, please let me know. I'm getting some odd reports of a problem like this, but I'm unable to reproduce it, and others are having a hard time too.

thanks,

greg k-h

#5 lore raw
Quoted 4 lines · Greg KH

That makes me very suspicious. If you can reproduce it with the uhci driver again, please let me know. I'm getting some odd reports of a problem like this, but I'm unable to reproduce it, and others are having a hard time too.

I recently bought a BAFO BF-810 usb->serial adaptor which also contained a pl2303 (the driver detects it as one at least). I have exactly the same behavior as Tony Hoyle. If I use the uhci module, it'll crash every time (I am using pilot-xfer to backup my palm for tests). If I change to the usb-uhci driver, it works.

Currently only running 2.4.19pre9. Will try a newer kernel soon. The driver itself has not changed between 2.4.19pre9 and 2.4.19, though.

(SMP-system).

Signature · 1 line
Thorkild Stray, Linpro AS                              <[email protected]>