Skip to contentSkip to conversation

SBLive 3d Positioning

DISCUSSION Alftheo Potgieter 2 participants 2 messages Sep 25, 2002 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

Hi

Does anybody know how to use the 3D positioning feature of the SB Live card? I want to place a number of individual sounds in space.

According to the ac97 spec, register 0x22 has bits for depth and center, which would do what I want, but the STAC9708 only has audio 'separation', which does not sound like specifying a position.

Is the EMU10K1 and the STAC9708 two separate devices, or is it two interfaces to the same underlying hardware?

alf

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#2 lore raw

At Wed, 25 Sep 2002 13:23:17 +0200,

Quoted 6 lines · Alftheo Potgieter

Hi

Does anybody know how to use the 3D positioning feature of the SB Live card? I want to place a number of individual sounds in space.

Quoted 6 lines

According to the ac97 spec, register 0x22 has bits for depth and center, which would do what I want, but the STAC9708 only has audio 'separation', which does not sound like specifying a position.

Is the EMU10K1 and the STAC9708 two separate devices, or is it two interfaces to the same underlying hardware?

emu10k1 can do such a job potentially with its DSP engine, but it has nothing to do with AC97. and, on ALSA, such a dsp code is not implemented yet.

you can try openAL for 3d positioning, although it's not hardware accelerated.

Takashi

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf