Dual PPro timer stopping problem
Hi,
I'm seeing a problem that's causing me someone may be able to shed some light on.
I've been running late 2.5.x kernels on a dual PPro box here for testing things. After a while (which can be anything from a few minutes to a couple of days), the timer interrupts stop happening. Most other interrupt sources (such as the network card, but not, apparently, the keyboard) continue to happen though. I've tried changing the motherboard and CPU set, but to no avail.
Anyone any suggestions as to what it might be, or what I might try to better determine the root of the problem?
I've attached the config I've been using for the kernels.
Cheers,
David
#
# Automatically generated make config: don't edit
#CONFIG_X86=yCONFIG_ISA=y
# CONFIG_SBUS is not setCONFIG_UID16=yCONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#CONFIG_EXPERIMENTAL=y
#
# General setup
#CONFIG_NET=yCONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not setCONFIG_SYSCTL=y
#
# Loadable module support
#CONFIG_MODULES=yCONFIG_MODVERSIONS=yCONFIG_KMOD=y
#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not setCONFIG_M686=y
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not setCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_CMPXCHG=yCONFIG_X86_XADD=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not setCONFIG_RWSEM_XCHGADD_ALGORITHM=yCONFIG_X86_L1_CACHE_SHIFT=5CONFIG_X86_TSC=yCONFIG_X86_GOOD_APIC=yCONFIG_X86_USE_PPRO_CHECKSUM=yCONFIG_X86_PPRO_FENCE=yCONFIG_SMP=y
# CONFIG_PREEMPT is not set
# CONFIG_X86_NUMA is not set
# CONFIG_X86_MCE is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not setCONFIG_X86_MSR=yCONFIG_X86_CPUID=yCONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_MTRR is not setCONFIG_HAVE_DEC_LOCK=y
#
# Power management options (ACPI, APM)
#
#
# ACPI Support
#
# CONFIG_ACPI is not set
# CONFIG_PM is not set
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#CONFIG_X86_IO_APIC=yCONFIG_X86_LOCAL_APIC=yCONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not setCONFIG_PCI_GOANY=yCONFIG_PCI_BIOS=yCONFIG_PCI_DIRECT=yCONFIG_PCI_NAMES=y
# CONFIG_EISA is not set
# CONFIG_MCA is not setCONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not setCONFIG_BINFMT_AOUT=yCONFIG_BINFMT_ELF=yCONFIG_BINFMT_MISC=y
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#CONFIG_PARPORT=yCONFIG_PARPORT_PC=yCONFIG_PARPORT_PC_CML1=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_AMIGA is not set
# CONFIG_PARPORT_MFC3 is not set
# CONFIG_PARPORT_ATARI is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_SUNBPP is not set
# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set
#
# Plug and Play configuration
#
# CONFIG_PNP is not set
#
# Block devices
#CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not setCONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
#
# ATA/ATAPI/MFM/RLL device support
#CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives #CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set
# CONFIG_BLK_DEV_COMMERIAL is not set CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_RZ1000 is not setCONFIG_BLK_DEV_IDEPCI=yCONFIG_IDEPCI_SHARE_IRQ=yCONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not setCONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not setCONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_ADMA100 is not set
# CONFIG_BLK_DEV_PDC202XX is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not setCONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_IDE_MODES is not set
#
# SCSI device support
#
# CONFIG_SCSI is not set
#
# Old non-SCSI/ATAPI CD-ROM drives
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION_BOOT is not set
# CONFIG_FUSION_ISENSE is not set
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LAN is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking options
#CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
# CONFIG_NETFILTER is not set
# CONFIG_FILTER is not setCONFIG_UNIX=yCONFIG_INET=yCONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_IPV6 is not set
#
# SCTP Configuration (EXPERIMENTAL)
#CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_IPX_INTERN is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network device support
#CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
#CONFIG_NET_ETHERNET=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not setCONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
# CONFIG_EL3 is not set
# CONFIG_3C515 is not setCONFIG_VORTEX=y
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not setCONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not setCONFIG_EEPRO100=y
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#CONFIG_INPUT=y
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not setCONFIG_SOUND_GAMEPORT=yCONFIG_SERIO=yCONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_MOUSE_ATIXL is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Character devices
#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_SERIAL_8250_EXTENDED=yCONFIG_SERIAL_8250_MANY_PORTS=yCONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_UNIX98_PTYS=yCONFIG_UNIX98_PTY_COUNT=256
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
#
# I2C support
#CONFIG_I2C=yCONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_PHILIPSPAR is not set
# CONFIG_I2C_ELV is not set
# CONFIG_I2C_VELLEMAN is not set
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_PROC is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not setCONFIG_AUTOFS4_FS=y
# CONFIG_REISERFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not setCONFIG_EXT3_FS=yCONFIG_JBD=y
# CONFIG_JBD_DEBUG is not setCONFIG_FAT_FS=yCONFIG_MSDOS_FS=y
# CONFIG_UMSDOS_FS is not setCONFIG_VFAT_FS=y
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not setCONFIG_TMPFS=yCONFIG_RAMFS=yCONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
# CONFIG_JFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_HPFS_FS is not setCONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not setCONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not setCONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not setCONFIG_NFS_FS=yCONFIG_NFS_V3=yCONFIG_NFSD=yCONFIG_NFSD_V3=y
# CONFIG_NFSD_TCP is not setCONFIG_SUNRPC=yCONFIG_LOCKD=yCONFIG_LOCKD_V4=yCONFIG_EXPORTFS=y
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_ZISOFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not setCONFIG_MSDOS_PARTITION=y
# CONFIG_SMB_NLS is not setCONFIG_NLS=y
#
# Native Language Support
#CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Console drivers
#CONFIG_VGA_CONSOLE=y
# CONFIG_VIDEO_SELECT is not set
# CONFIG_MDA_CONSOLE is not set
#
# Frame-buffer support
#
# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB is not set
#
# Bluetooth support
#
# CONFIG_BLUEZ is not set
#
# Kernel hacking
#CONFIG_DEBUG_KERNEL=yCONFIG_DEBUG_SLAB=y
# CONFIG_DEBUG_IOVIRT is not setCONFIG_MAGIC_SYSRQ=yCONFIG_DEBUG_SPINLOCK=y
#
# Security options
#CONFIG_SECURITY_CAPABILITIES=y
#
# Library routines
#
# CONFIG_CRC32 is not set
# CONFIG_ZLIB_INFLATE is not set
# CONFIG_ZLIB_DEFLATE is not set
Quoted 11 lines · David Howells
Hi,
I'm seeing a problem that's causing me someone may be able to shed some light on.
I've been running late 2.5.x kernels on a dual PPro box here for testing things. After a while (which can be anything from a few minutes to a couple of days), the timer interrupts stop happening. Most other interrupt sources (such as the network card, but not, apparently, the keyboard) continue to happen though. I've tried changing the motherboard and CPU set, but to no avail.
Does this happen with "noapic" ?
Quoted 2 lines
Does this happen with "noapic" ?
Interesting:
[root@host164 root]# cat /proc/interrupts
CPU0 CPU1
0: 150710 0 XT-PIC timer 1: 15 0 XT-PIC i8042 2: 0 0 XT-PIC cascade 11: 457 0 XT-PIC eth0 14: 74220 0 XT-PIC ide0 NMI: 35480 150619 LOC: 150451 150454 ERR: 0 MIS: 0
Lots of zeros in the CPU1 column.
It's still going though.
David
Quoted 11 lines · David Howells
Hi,
I'm seeing a problem that's causing me someone may be able to shed some light on.
I've been running late 2.5.x kernels on a dual PPro box here for testing things. After a while (which can be anything from a few minutes to a couple of days), the timer interrupts stop happening. Most other interrupt sources (such as the network card, but not, apparently, the keyboard) continue to happen though. I've tried changing the motherboard and CPU set, but to no avail.
The keyboard is, or at least depends on polling which is controled by a timer, thus, no timer, => no keyboard.
-g
Quoted 711 lines
Anyone any suggestions as to what it might be, or what I might try to better determine the root of the problem?
I've attached the config I've been using for the kernels.
Cheers,
David#
# Automatically generated make config: don't edit
#CONFIG_X86=yCONFIG_ISA=y
#CONFIG_SBUSis not setCONFIG_UID16=yCONFIG_GENERIC_ISA_DMA=y#
# Code maturity level options
#CONFIG_EXPERIMENTAL=y#
# General setup
#CONFIG_NET=yCONFIG_SYSVIPC=y
#CONFIG_BSD_PROCESS_ACCTis not setCONFIG_SYSCTL=y#
# Loadable module support
#CONFIG_MODULES=yCONFIG_MODVERSIONS=yCONFIG_KMOD=y#
# Processor type and features
#
#CONFIG_M386is not set
#CONFIG_M486is not set
#CONFIG_M586is not set
#CONFIG_M586TSCis not set
#CONFIG_M586MMXis not setCONFIG_M686=y
#CONFIG_MPENTIUMIIIis not set
#CONFIG_MPENTIUM4is not set
#CONFIG_MK6is not set
#CONFIG_MK7is not set
#CONFIG_MELANis not set
#CONFIG_MCRUSOEis not set
#CONFIG_MWINCHIPC6is not set
#CONFIG_MWINCHIP2is not set
#CONFIG_MWINCHIP3Dis not set
#CONFIG_MCYRIXIIIis not setCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_CMPXCHG=yCONFIG_X86_XADD=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=y
#CONFIG_RWSEM_GENERIC_SPINLOCKis not setCONFIG_RWSEM_XCHGADD_ALGORITHM=yCONFIG_X86_L1_CACHE_SHIFT=5CONFIG_X86_TSC=yCONFIG_X86_GOOD_APIC=yCONFIG_X86_USE_PPRO_CHECKSUM=yCONFIG_X86_PPRO_FENCE=yCONFIG_SMP=y
#CONFIG_PREEMPTis not set
#CONFIG_X86_NUMAis not set
#CONFIG_X86_MCEis not set
#CONFIG_TOSHIBAis not set
#CONFIG_I8Kis not set
#CONFIG_MICROCODEis not setCONFIG_X86_MSR=yCONFIG_X86_CPUID=yCONFIG_NOHIGHMEM=y
#CONFIG_HIGHMEM4Gis not set
#CONFIG_HIGHMEM64Gis not set
#CONFIG_MATH_EMULATIONis not set
#CONFIG_MTRRis not setCONFIG_HAVE_DEC_LOCK=y#
# Power management options (ACPI, APM)
##
# ACPI Support
#
#CONFIG_ACPIis not set
#CONFIG_PMis not set
#CONFIG_APM_IGNORE_USER_SUSPENDis not set
#CONFIG_APM_DO_ENABLEis not set
#CONFIG_APM_CPU_IDLEis not set
#CONFIG_APM_DISPLAY_BLANKis not set
#CONFIG_APM_RTC_IS_GMTis not set
#CONFIG_APM_ALLOW_INTSis not set
#CONFIG_APM_REAL_MODE_POWER_OFFis not set#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#CONFIG_X86_IO_APIC=yCONFIG_X86_LOCAL_APIC=yCONFIG_PCI=y
#CONFIG_PCI_GOBIOSis not set
#CONFIG_PCI_GODIRECTis not setCONFIG_PCI_GOANY=yCONFIG_PCI_BIOS=yCONFIG_PCI_DIRECT=yCONFIG_PCI_NAMES=y
#CONFIG_EISAis not set
#CONFIG_MCAis not setCONFIG_HOTPLUG=y#
# PCMCIA/CardBus support
#
#CONFIG_PCMCIAis not set#
# PCI Hotplug Support
#
#CONFIG_HOTPLUG_PCIis not set#
# Executable file formats
#CONFIG_KCORE_ELF=y
#CONFIG_KCORE_AOUTis not setCONFIG_BINFMT_AOUT=yCONFIG_BINFMT_ELF=yCONFIG_BINFMT_MISC=y#
# Memory Technology Devices (MTD)
#
#CONFIG_MTDis not set#
# Parallel port support
#CONFIG_PARPORT=yCONFIG_PARPORT_PC=yCONFIG_PARPORT_PC_CML1=y
#CONFIG_PARPORT_SERIALis not set
#CONFIG_PARPORT_PC_FIFOis not set
#CONFIG_PARPORT_PC_SUPERIOis not set
#CONFIG_PARPORT_AMIGAis not set
#CONFIG_PARPORT_MFC3is not set
#CONFIG_PARPORT_ATARIis not set
#CONFIG_PARPORT_GSCis not set
#CONFIG_PARPORT_SUNBPPis not set
#CONFIG_PARPORT_OTHERis not set
#CONFIG_PARPORT_1284is not set#
# Plug and Play configuration
#
#CONFIG_PNPis not set#
# Block devices
#CONFIG_BLK_DEV_FD=y
#CONFIG_BLK_DEV_XDis not set
#CONFIG_PARIDEis not set
#CONFIG_BLK_CPQ_DAis not set
#CONFIG_BLK_CPQ_CISS_DAis not set
#CONFIG_BLK_DEV_DAC960is not set
#CONFIG_BLK_DEV_UMEMis not setCONFIG_BLK_DEV_LOOP=m
#CONFIG_BLK_DEV_NBDis not set
#CONFIG_BLK_DEV_RAMis not set#
# ATA/ATAPI/MFM/RLL device support
#CONFIG_IDE=y#
# IDE, ATA and ATAPI Block devices
#CONFIG_BLK_DEV_IDE=y#
# Please seeDocumentation/ide.txtfor help/info on IDE drives #CONFIG_BLK_DEV_IDEDISK=y
#CONFIG_IDEDISK_MULTI_MODEis not set
#CONFIG_IDEDISK_STROKEis not set
#CONFIG_BLK_DEV_IDEDISK_VENDORis not set
#CONFIG_BLK_DEV_COMMERIALis not setCONFIG_BLK_DEV_IDECD=y
#CONFIG_BLK_DEV_IDETAPEis not set
#CONFIG_BLK_DEV_IDEFLOPPYis not set
#CONFIG_IDE_TASK_IOCTLis not set#
# IDE chipset support/bugfixes
#
#CONFIG_BLK_DEV_CMD640is not set
#CONFIG_BLK_DEV_RZ1000is not setCONFIG_BLK_DEV_IDEPCI=yCONFIG_IDEPCI_SHARE_IRQ=yCONFIG_BLK_DEV_IDEDMA_PCI=y
#CONFIG_BLK_DEV_OFFBOARDis not set
#CONFIG_BLK_DEV_IDEDMA_FORCEDis not setCONFIG_IDEDMA_PCI_AUTO=y
#CONFIG_IDEDMA_ONLYDISKis not setCONFIG_BLK_DEV_IDEDMA=y
#CONFIG_IDEDMA_PCI_WIPis not set
#CONFIG_BLK_DEV_AEC62XXis not set
#CONFIG_BLK_DEV_ALI15X3is not set
#CONFIG_BLK_DEV_AMD74XXis not set
#CONFIG_BLK_DEV_CMD64Xis not set
#CONFIG_BLK_DEV_CY82C693is not set
#CONFIG_BLK_DEV_CS5530is not set
#CONFIG_BLK_DEV_HPT34Xis not set
#CONFIG_BLK_DEV_HPT366is not set
#CONFIG_BLK_DEV_PIIXis not set
#CONFIG_BLK_DEV_NS87415is not set
#CONFIG_BLK_DEV_OPTI621is not set
#CONFIG_BLK_DEV_ADMA100is not set
#CONFIG_BLK_DEV_PDC202XXis not set
#CONFIG_BLK_DEV_RZ1000is not set
#CONFIG_BLK_DEV_SVWKSis not set
#CONFIG_BLK_DEV_SIS5513is not set
#CONFIG_BLK_DEV_SLC90E66is not set
#CONFIG_BLK_DEV_TRM290is not set
#CONFIG_BLK_DEV_VIA82CXXXis not set
#CONFIG_IDE_CHIPSETSis not setCONFIG_IDEDMA_AUTO=y
#CONFIG_IDEDMA_IVBis not set
#CONFIG_DMA_NONPCIis not set
#CONFIG_BLK_DEV_IDE_MODESis not set#
# SCSI device support
#
#CONFIG_SCSIis not set#
# Old non-SCSI/ATAPI CD-ROM drives
#
#CONFIG_CD_NO_IDESCSIis not set#
# Multi-device support (RAID and LVM)
#
#CONFIG_MDis not set#
# Fusion MPT device support
#
#CONFIG_FUSION_BOOTis not set
#CONFIG_FUSION_ISENSEis not set
#CONFIG_FUSION_CTLis not set
#CONFIG_FUSION_LANis not set#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
#CONFIG_IEEE1394is not set#
# I2O device support
#
#CONFIG_I2Ois not set#
# Networking options
#CONFIG_PACKET=y
#CONFIG_PACKET_MMAPis not set
#CONFIG_NETLINK_DEVis not set
#CONFIG_NETFILTERis not set
#CONFIG_FILTERis not setCONFIG_UNIX=yCONFIG_INET=yCONFIG_IP_MULTICAST=y
#CONFIG_IP_ADVANCED_ROUTERis not set
#CONFIG_IP_PNPis not set
#CONFIG_NET_IPIPis not set
#CONFIG_NET_IPGREis not set
#CONFIG_IP_MROUTEis not set
#CONFIG_ARPDis not set
#CONFIG_INET_ECNis not set
#CONFIG_SYN_COOKIESis not set
#CONFIG_IPV6is not set#
# SCTP Configuration (EXPERIMENTAL)
#CONFIG_IPV6_SCTP__=y
#CONFIG_IP_SCTPis not set
#CONFIG_ATMis not set
#CONFIG_VLAN_8021Qis not set
#CONFIG_LLCis not set
#CONFIG_IPX_INTERNis not set
#CONFIG_DECNETis not set
#CONFIG_BRIDGEis not set
#CONFIG_X25is not set
#CONFIG_LAPBis not set
#CONFIG_NET_DIVERTis not set
#CONFIG_ECONETis not set
#CONFIG_WAN_ROUTERis not set
#CONFIG_NET_FASTROUTEis not set
#CONFIG_NET_HW_FLOWCONTROLis not set#
# QoS and/or fair queueing
#
#CONFIG_NET_SCHEDis not set#
# Network device support
#CONFIG_NETDEVICES=y#
# ARCnet devices
#
#CONFIG_ARCNETis not set
#CONFIG_DUMMYis not set
#CONFIG_BONDINGis not set
#CONFIG_EQUALIZERis not set
#CONFIG_TUNis not set
#CONFIG_ETHERTAPis not set#
# Ethernet (10 or 100Mbit)
#CONFIG_NET_ETHERNET=y
#CONFIG_HAPPYMEALis not set
#CONFIG_SUNGEMis not setCONFIG_NET_VENDOR_3COM=y
#CONFIG_EL1is not set
#CONFIG_EL2is not set
#CONFIG_ELPLUSis not set
#CONFIG_EL16is not set
#CONFIG_EL3is not set
#CONFIG_3C515is not setCONFIG_VORTEX=y
#CONFIG_LANCEis not set
#CONFIG_NET_VENDOR_SMCis not set
#CONFIG_NET_VENDOR_RACALis not set
#CONFIG_AT1700is not set
#CONFIG_DEPCAis not set
#CONFIG_HP100is not set
#CONFIG_NET_ISAis not setCONFIG_NET_PCI=y
#CONFIG_PCNET32is not set
#CONFIG_ADAPTEC_STARFIREis not set
#CONFIG_AC3200is not set
#CONFIG_APRICOTis not set
#CONFIG_CS89x0is not set
#CONFIG_DGRSis not setCONFIG_EEPRO100=y
#CONFIG_E100is not set
#CONFIG_FEALNXis not set
#CONFIG_NATSEMIis not set
#CONFIG_NE2K_PCIis not set
#CONFIG_8139CPis not set
#CONFIG_8139TOOis not set
#CONFIG_SIS900is not set
#CONFIG_EPIC100is not set
#CONFIG_SUNDANCEis not set
#CONFIG_TLANis not set
#CONFIG_VIA_RHINEis not set
#CONFIG_NET_POCKETis not set#
# Ethernet (1000 Mbit)
#
#CONFIG_ACENICis not set
#CONFIG_DL2Kis not set
#CONFIG_E1000is not set
#CONFIG_NS83820is not set
#CONFIG_HAMACHIis not set
#CONFIG_YELLOWFINis not set
#CONFIG_SK98LINis not set
#CONFIG_TIGON3is not set
#CONFIG_FDDIis not set
#CONFIG_HIPPIis not set
#CONFIG_PLIPis not set
#CONFIG_PPPis not set
#CONFIG_SLIPis not set#
# Wireless LAN (non-hamradio)
#
#CONFIG_NET_RADIOis not set#
# Token Ring devices
#
#CONFIG_TRis not set
#CONFIG_NET_FCis not set
#CONFIG_RCPCIis not set
#CONFIG_SHAPERis not set#
# Wan interfaces
#
#CONFIG_WANis not set#
# Tulip family network device support
#
#CONFIG_NET_TULIPis not set#
# Amateur Radio support
#
#CONFIG_HAMRADIOis not set#
# IrDA (infrared) support
#
#CONFIG_IRDAis not set#
# ISDN subsystem
#
#CONFIG_ISDN_BOOLis not set#
# Telephony Support
#
#CONFIG_PHONEis not set#
# Input device support
#CONFIG_INPUT=y#
# Userland interfaces
#
#CONFIG_INPUT_MOUSEDEVis not set
#CONFIG_INPUT_JOYDEVis not set
#CONFIG_INPUT_TSDEVis not set
#CONFIG_INPUT_EVDEVis not set
#CONFIG_INPUT_EVBUGis not set#
# Input I/O drivers
#
#CONFIG_GAMEPORTis not setCONFIG_SOUND_GAMEPORT=yCONFIG_SERIO=yCONFIG_SERIO_I8042=y
#CONFIG_SERIO_SERPORTis not set
#CONFIG_SERIO_CT82C710is not set
#CONFIG_SERIO_PARKBDis not set#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=y
#CONFIG_KEYBOARD_SUNKBDis not set
#CONFIG_KEYBOARD_XTKBDis not set
#CONFIG_KEYBOARD_NEWTONis not set
#CONFIG_INPUT_MOUSEis not set
#CONFIG_MOUSE_ATIXLis not set
#CONFIG_INPUT_JOYSTICKis not set
#CONFIG_INPUT_TOUCHSCREENis not set
#CONFIG_INPUT_MISCis not set#
# Character devices
#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=y
#CONFIG_SERIAL_NONSTANDARDis not set#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_SERIAL_8250_EXTENDED=yCONFIG_SERIAL_8250_MANY_PORTS=yCONFIG_SERIAL_8250_SHARE_IRQ=y
#CONFIG_SERIAL_8250_DETECT_IRQis not set
#CONFIG_SERIAL_8250_MULTIPORTis not set
#CONFIG_SERIAL_8250_RSAis not set#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_UNIX98_PTYS=yCONFIG_UNIX98_PTY_COUNT=256
#CONFIG_PRINTERis not set
#CONFIG_PPDEVis not set#
# I2C support
#CONFIG_I2C=yCONFIG_I2C_ALGOBIT=y
#CONFIG_I2C_PHILIPSPARis not set
#CONFIG_I2C_ELVis not set
#CONFIG_I2C_VELLEMANis not set
#CONFIG_I2C_ALGOPCFis not set
#CONFIG_I2C_CHARDEVis not set
#CONFIG_I2C_PROCis not set#
# Mice
#
#CONFIG_BUSMOUSEis not set
#CONFIG_QIC02_TAPEis not set#
# Watchdog Cards
#
#CONFIG_WATCHDOGis not set
#CONFIG_INTEL_RNGis not set
#CONFIG_NVRAMis not set
#CONFIG_RTCis not set
#CONFIG_GEN_RTCis not set
#CONFIG_DTLKis not set
#CONFIG_R3964is not set
#CONFIG_APPLICOMis not set
#CONFIG_SONYPIis not set#
# Ftape, the floppy tape device driver
#
#CONFIG_FTAPEis not set
#CONFIG_AGPis not set
#CONFIG_DRMis not set
#CONFIG_MWAVEis not set
#CONFIG_RAW_DRIVERis not set#
# Multimedia devices
#
#CONFIG_VIDEO_DEVis not set#
# File systems
#
#CONFIG_QUOTAis not set
#CONFIG_AUTOFS_FSis not setCONFIG_AUTOFS4_FS=y
#CONFIG_REISERFS_FSis not set
#CONFIG_ADFS_FSis not set
#CONFIG_AFFS_FSis not set
#CONFIG_HFS_FSis not set
#CONFIG_BFS_FSis not setCONFIG_EXT3_FS=yCONFIG_JBD=y
#CONFIG_JBD_DEBUGis not setCONFIG_FAT_FS=yCONFIG_MSDOS_FS=y
#CONFIG_UMSDOS_FSis not setCONFIG_VFAT_FS=y
#CONFIG_EFS_FSis not set
#CONFIG_CRAMFSis not setCONFIG_TMPFS=yCONFIG_RAMFS=yCONFIG_ISO9660_FS=y
#CONFIG_JOLIETis not set
#CONFIG_ZISOFSis not set
#CONFIG_JFS_FSis not set
#CONFIG_MINIX_FSis not set
#CONFIG_VXFS_FSis not set
#CONFIG_NTFS_FSis not set
#CONFIG_HPFS_FSis not setCONFIG_PROC_FS=y
#CONFIG_DEVFS_FSis not setCONFIG_DEVPTS_FS=y
#CONFIG_QNX4FS_FSis not set
#CONFIG_ROMFS_FSis not setCONFIG_EXT2_FS=y
#CONFIG_SYSV_FSis not set
#CONFIG_UDF_FSis not set
#CONFIG_UFS_FSis not set#
# Network File Systems
#
#CONFIG_CODA_FSis not set
#CONFIG_INTERMEZZO_FSis not setCONFIG_NFS_FS=yCONFIG_NFS_V3=yCONFIG_NFSD=yCONFIG_NFSD_V3=y
#CONFIG_NFSD_TCPis not setCONFIG_SUNRPC=yCONFIG_LOCKD=yCONFIG_LOCKD_V4=yCONFIG_EXPORTFS=y
#CONFIG_SMB_FSis not set
#CONFIG_NCP_FSis not set
#CONFIG_ZISOFS_FSis not set#
# Partition Types
#
#CONFIG_PARTITION_ADVANCEDis not setCONFIG_MSDOS_PARTITION=y
#CONFIG_SMB_NLSis not setCONFIG_NLS=y#
# Native Language Support
#CONFIG_NLS_DEFAULT="iso8859-1"
#CONFIG_NLS_CODEPAGE_437is not set
#CONFIG_NLS_CODEPAGE_737is not set
#CONFIG_NLS_CODEPAGE_775is not set
#CONFIG_NLS_CODEPAGE_850is not set
#CONFIG_NLS_CODEPAGE_852is not set
#CONFIG_NLS_CODEPAGE_855is not set
#CONFIG_NLS_CODEPAGE_857is not set
#CONFIG_NLS_CODEPAGE_860is not set
#CONFIG_NLS_CODEPAGE_861is not set
#CONFIG_NLS_CODEPAGE_862is not set
#CONFIG_NLS_CODEPAGE_863is not set
#CONFIG_NLS_CODEPAGE_864is not set
#CONFIG_NLS_CODEPAGE_865is not set
#CONFIG_NLS_CODEPAGE_866is not set
#CONFIG_NLS_CODEPAGE_869is not set
#CONFIG_NLS_CODEPAGE_936is not set
#CONFIG_NLS_CODEPAGE_950is not set
#CONFIG_NLS_CODEPAGE_932is not set
#CONFIG_NLS_CODEPAGE_949is not set
#CONFIG_NLS_CODEPAGE_874is not set
#CONFIG_NLS_ISO8859_8is not set
#CONFIG_NLS_CODEPAGE_1250is not set
#CONFIG_NLS_CODEPAGE_1251is not set
#CONFIG_NLS_ISO8859_1is not set
#CONFIG_NLS_ISO8859_2is not set
#CONFIG_NLS_ISO8859_3is not set
#CONFIG_NLS_ISO8859_4is not set
#CONFIG_NLS_ISO8859_5is not set
#CONFIG_NLS_ISO8859_6is not set
#CONFIG_NLS_ISO8859_7is not set
#CONFIG_NLS_ISO8859_9is not set
#CONFIG_NLS_ISO8859_13is not set
#CONFIG_NLS_ISO8859_14is not set
#CONFIG_NLS_ISO8859_15is not set
#CONFIG_NLS_KOI8_Ris not set
#CONFIG_NLS_KOI8_Uis not set
#CONFIG_NLS_UTF8is not set#
# Console drivers
#CONFIG_VGA_CONSOLE=y
#CONFIG_VIDEO_SELECTis not set
#CONFIG_MDA_CONSOLEis not set#
# Frame-buffer support
#
#CONFIG_FBis not set#
# Sound
#
#CONFIG_SOUNDis not set#
# USB support
#
#CONFIG_USBis not set#
# Bluetooth support
#
#CONFIG_BLUEZis not set#
# Kernel hacking
#CONFIG_DEBUG_KERNEL=yCONFIG_DEBUG_SLAB=y
#CONFIG_DEBUG_IOVIRTis not setCONFIG_MAGIC_SYSRQ=yCONFIG_DEBUG_SPINLOCK=y#
# Security options
#CONFIG_SECURITY_CAPABILITIES=y#
# Library routines
#
#CONFIG_CRC32is not set
#CONFIG_ZLIB_INFLATEis not set
#CONFIG_ZLIB_DEFLATEis not set-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Signature · 5 lines
George Anzinger [email protected] High-res-timers: http://sourceforge.net/projects/high-res-timers/ Preemption patch: http://www.kernel.org/pub/linux/kernel/people/rml
Quoted 2 lines · george anzinger
The keyboard is, or at least depends on polling which is controled by a timer, thus, no timer, => no keyboard.
Eh? Sure, by a timer internal to the keyboard itself. At least x86 hardware has an interrupt wired to its keyboard controller that is used to signal when a keystroke is available, and if you look into the driver, you'd see that no timers are used at all.
-ben
Quoted 10 lines · Benjamin LaHaise
Quoted 2 lines · george anzinger
The keyboard is, or at least depends on polling which is controled by a timer, thus, no timer, => no keyboard.
Eh? Sure, by a timer internal to the keyboard itself. At least x86 hardware has an interrupt wired to its keyboard controller that is used to signal when a keystroke is available, and if you look into the driver, you'd see that no timers are used at all.
Hm? I must have been seeing double ;) Been doing that a lot lately :(
Signature · 5 lines
George Anzinger [email protected] High-res-timers: http://sourceforge.net/projects/high-res-timers/ Preemption patch: http://www.kernel.org/pub/linux/kernel/people/rml