Skip to contentSkip to conversation

problems: flushing during snd_pcm_wait()

DISCUSSION James Courtier-Dutton 3 participants 6 messages Oct 10, 2002 – Oct 11, 2002

lore
Share & tools
lore
#0 lore raw

Hello
I have an application that has many different threads.
The sound card's PCM buffer is full during playback, and one thread is currently in snd_pcm_wait() waiting for enough space to appear in the buffer before doing the next snd_pcm_write(). A different thread wants to flush the buffer. There are two types of flush: -
1) Immeadiately empty the buffer.
2) Stop accepting snd_pcm_write() commands until the current buffer has drained.

Can someone please tell me which API calls I should make to get the buffer to flush properly. I am currently doing things like: -
int flush() {
<snip...>

     if ((result=snd_pcm_reset(this->audio_fd)) < 0) {
       printf("audio_alsa_out: Reset call failed err=%d\n",result);
     }
     if ((result=snd_pcm_drain(this->audio_fd)) < 0) {
       printf("audio_alsa_out: Drain call failed err=%d\n",result);
     }
     if ((result=snd_pcm_prepare(this->audio_fd)) < 0) {
       printf("audio_alsa_out: Prepare call failed err=%d\n",result);
     }
}

But this is causing all sorts of problems, one of which is that the application hangs, and has to be killed with -9, and the audio hardware ring buffer is left playing a repeated sound even with: - /proc/asound/card0/pcm0p/sub0# cat status
closed

Cheers
James

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#1 lore raw

At Fri, 11 Oct 2002 01:25:19 +1000,

Quoted 9 lines · James Courtier-Dutton

Hello
I have an application that has many different threads.
The sound card's PCM buffer is full during playback, and one thread is currently in snd_pcm_wait() waiting for enough space to appear in the buffer before doing the next snd_pcm_write().
A different thread wants to flush the buffer. There are two types of
flush: -
1) Immeadiately empty the buffer.

snd_pcm_drop() ?

Quoted 2 lines

2) Stop accepting snd_pcm_write() commands until the current buffer has drained.

snd_pcm_drain() ?

Takashi

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#2 lore raw
Quoted 16 lines · Takashi Iwai

At Fri, 11 Oct 2002 01:25:19 +1000,

Quoted 7 lines · James Courtier-Dutton

Hello
I have an application that has many different threads.
The sound card's PCM buffer is full during playback, and one thread is currently in snd_pcm_wait() waiting for enough space to appear in the buffer before doing the next snd_pcm_write(). A different thread wants to flush the buffer. There are two types of flush: -
1) Immeadiately empty the buffer.

snd_pcm_drop() ?

Quoted 11 lines
Quoted 3 lines

2) Stop accepting snd_pcm_write() commands until the current buffer has drained.

snd_pcm_drain() ?

Takashi

Thankyou, I will use snd_pcm_drop(), but as a side note, what actually does "snd_pcm_reset()" do. Just resetting delay to 0 does not make much sense to me.

Cheer

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#3 lore raw
Quoted 29 lines · James Courtier-Dutton
Quoted 27 lines · Takashi Iwai

At Fri, 11 Oct 2002 01:25:19 +1000,

Quoted 10 lines · James Courtier-Dutton

Hello
I have an application that has many different threads.
The sound card's PCM buffer is full during playback, and one thread is currently in snd_pcm_wait() waiting for enough space to appear in the buffer before doing the next snd_pcm_write().
A different thread wants to flush the buffer. There are two types of
flush: -
1) Immeadiately empty the buffer.

snd_pcm_drop() ?

Quoted 4 lines

2) Stop accepting snd_pcm_write() commands until the current buffer has drained.

snd_pcm_drain() ?

Quoted 7 lines
Quoted 4 lines

Takashi

Thankyou, I will use snd_pcm_drop(), but as a side note, what actually does "snd_pcm_reset()" do.
Just resetting delay to 0 does not make much sense to me.

It drops all samples in the ring buffer (thus reseting delay to 0). Note that everybody are welcome to improve the current documentation (preferably with patches).

Jaroslav

-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project http://www.alsa-project.org
SuSE Linux http://www.suse.com

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#4 lore raw
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 10 lines
Quoted 4 lines

Thankyou, I will use snd_pcm_drop(), but as a side note, what actually does "snd_pcm_reset()" do. Just resetting delay to 0 does not make much sense to me.

It drops all samples in the ring buffer (thus reseting delay to 0). Note that everybody are welcome to improve the current documentation (preferably with patches).

Jaroslav

Ok, so snd_pcm_drop drops all samples in the buffer, so I would assume this sets the delay to 0. so snd_pcm_reset drops all sample in the buffer, so as you say is sets delay to 0. So my question is "What is the difference between the 2 functions?"

Cheers
James

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#5 lore raw
Quoted 10 lines · James Courtier-Dutton
Quoted 10 lines
Quoted 5 lines

Thankyou, I will use snd_pcm_drop(), but as a side note, what actually does "snd_pcm_reset()" do.
Just resetting delay to 0 does not make much sense to me.

It drops all samples in the ring buffer (thus reseting delay to 0). Note that everybody are welcome to improve the current documentation (preferably with patches).

Quoted 8 lines
Quoted 3 lines

Jaroslav

Ok, so snd_pcm_drop drops all samples in the buffer, so I would assume this sets the delay to 0.
so snd_pcm_reset drops all sample in the buffer, so as you say is sets delay to 0.
So my question is "What is the difference between the 2 functions?"

reset() doesn't stop the stream. It's mainly useable, if you have streams linked together with hardware or if an application wants to act very realtime and has xrun detection disabled.

Jaroslav

-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project http://www.alsa-project.org
SuSE Linux http://www.suse.com

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf