Skip to contentSkip to conversation

timer oops still present in 2.5.41-mm2

DISCUSSION Dave Hansen 2 participants 2 messages Oct 11, 2002

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

Ingo, I hate to keep giving you false hope that this is fixed. But, remember this is just -mm2, so any current BK fixes that change it wouldn't be in here, including the keyboard timer fixes that you were talking about.

Andrew, I noticed that you picked up Ingo's timer fix in 2.5.41-mm2 as
timer-tricks.patch. Despite this, Specweb ran for about 10 minutes on, then failed with the oops below. 2.5.41, without Ingo's patch oopses in seconds. It's very hard to get results out of Specweb when it is crashing this often.

Could a misbehaving timer be causing the TCP errors too? I'd never seen them before 2.5.40. I don't know how closely the TCP errors occurred to the timer oops.

Attempt to release TCP socket in state 1 e099ed60
Attempt to release TCP socket in state 1 f58cf460
Attempt to release TCP socket in state 1 e0f7d5a0
Attempt to release TCP socket in state 1 e106c4e0
Attempt to release TCP socket in state 1 e02667e0

Unable to handle kernel paging request at virtual address b800298c
 printing eip:
e027d3e0
*pde = 00000000
Oops: 0002
oprofile
CPU:    4
EIP:    0060:[<e027d3e0>]    Not tainted
EFLAGS: 00010282

EIP is at E nlm_debug_Rsmp_53445f68+0x1fdd5114/0xffd932a4
eax: f58cf698 ebx: e027d3d8 ecx: e164e6f8 edx: c0375ef8
esi: c0378060 edi: c0375b00 ebp: 00000292 esp: f7f97f14
ds: 0068 es: 0068 ss: 0068
Process swapper (pid: 0, threadinfo=f7f96000 task=f7fc0060)

Stack: 68c03780 c011fa30 e164e6f8 cb1101c8 00000000 f7f96000 00000001 c011c9b5
       00000000 00000001 c0371960 fffffffe 00000080 c0356dc4 c0356dc4 
c011c6ba
       c0371960 00000010 00000004 00000000 00000000 00000046 c0110efd 
f7f96000
Call Trace:
 [<c011fa30>] run_timer_tasklet+0xe4/0x12c
 [<c011c9b5>] tasklet_hi_action+0x85/0xe0
 [<c011c6ba>] do_softirq+0x5a/0xac
 [<c0110efd>] smp_apic_timer_interrupt+0x111/0x118
 [<c0105334>] poll_idle+0x0/0x48
 [<c01079ca>] apic_timer_interrupt+0x1a/0x20
 [<c0105334>] poll_idle+0x0/0x48
 [<c0105356>] poll_idle+0x22/0x48
 [<c01053b3>] cpu_idle+0x37/0x48
 [<c0117f5e>] printk+0x11e/0x138

Code: a3 8c 29 00 b8 04 26 c0 a0 d1 27 e0 40 7b 37 c0 f0 d3 27 e0
Signature · 2 lines
Dave Hansen
[email protected]
#1 lore raw
Quoted 8 lines · Dave Hansen

Ingo, I hate to keep giving you false hope that this is fixed. But, remember this is just -mm2, so any current BK fixes that change it wouldn't be in here, including the keyboard timer fixes that you were talking about.

Andrew, I noticed that you picked up Ingo's timer fix in 2.5.41-mm2 as timer-tricks.patch.

No, that was random akpm hacks. Ingo's fix is in Linus's tree. And, hence, in -mm3.

Quoted 9 lines

Despite this, Specweb ran for about 10 minutes
on, then failed with the oops below. 2.5.41, without Ingo's patch oopses in seconds. It's very hard to get results out of Specweb when it is crashing this often.

Could a misbehaving timer be causing the TCP errors too? I'd never seen them before 2.5.40. I don't know how closely the TCP errors occurred to the timer oops.

Quoted 5 lines

Attempt to release TCP socket in state 1 e099ed60
Attempt to release TCP socket in state 1 f58cf460
Attempt to release TCP socket in state 1 e0f7d5a0
Attempt to release TCP socket in state 1 e106c4e0
Attempt to release TCP socket in state 1 e02667e0

Well it could be that TCP is abusing the timer code. It would be sad if we were looking in the wrong place. Might be a timing problem in networking which has been exposed by smptimers.

Have you tried enabling all the memory debugging options? It'll cripple performance, but may help find something.