Skip to contentSkip to conversation

acpi-20021101, Dell inspiron 8100 report.

DISCUSSION Mike 3 participants 7 messages Nov 10, 2002 – Nov 16, 2002 5 messages not in the archive ACPI

lore
Share & tools
lore

Mike

author
#0 lore raw

I am using acpi-20021101 on a dell inspiron 8100. When I try to go into S1 sleep computer does not sleep. Te power button blinks on and off, which is unusal, and the screen never blanks, even when I close the lid. I do have acpid setup to send echo 1 > /proc/acpi/sleep

Is there anything I can send to the list to help with diagnostics?

Thanks,
Mike

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

A message that is not in the archive (sent off-list or not yet received): 3DCDD9B7.8010508-oe7qfRrRQfesx2OscRBu2odd74u8MsAO@public.gmane.org

#2 lore raw

Hi!

Quoted 6 lines

I am using acpi-20021101 on a dell inspiron 8100. When I try to go into S1 sleep computer does not sleep. Te power button blinks on and off, which is unusal, and the screen never blanks, even when I close the lid. I do have acpid setup to send echo 1 > /proc/acpi/sleep

Is there anything I can send to the list to help with diagnostics?

Screen staying on is normal. Does it wake up
when you press power?

Signature · 8 lines
				Pavel
My velo broke, so I got Zaurus. If you have Philips Velo 1 you don't need...


-------------------------------------------------------
This sf.net email is sponsored by: To learn the basics of securing 
your web site with SSL, click here to get a FREE TRIAL of a Thawte 
Server Certificate: http://www.gothawte.com/rd524.html
author
#3 lore raw
Quoted 4 lines · Pavel Machek

Hi!

Quoted 11 lines
Quoted 5 lines

I am using acpi-20021101 on a dell inspiron 8100. When I try to go into S1 sleep computer does not sleep. Te power button blinks on and off, which is unusal, and the screen never blanks, even when I close the lid. I do have acpid setup to send echo 1 > /proc/acpi/sleep

Is there anything I can send to the list to help with diagnostics?

Screen staying on is normal. Does it wake up
when you press power?

When I press power to restore the console is always locked up tight. I cannot use keyboard or mouse, but if I am in X my X console usually works after restore, but not all the time.

How can I make the screen blank when I go into sleep?

Mike

-------------------------------------------------------
This sf.net email is sponsored by: To learn the basics of securing your web site with SSL, click here to get a FREE TRIAL of a Thawte Server Certificate: http://www.gothawte.com/rd524.html

A message that is not in the archive (sent off-list or not yet received): 3DD524E5.8090709-oe7qfRrRQfesx2OscRBu2odd74u8MsAO@public.gmane.org

#5 lore raw

Hi!

Quoted 9 lines
Quoted 9 lines
Quoted 8 lines

I am using acpi-20021101 on a dell inspiron 8100. When I try to go into S1 sleep computer does not sleep. Te power button blinks on and off, which is unusal, and the screen never blanks, even when I close the lid. I do have acpid setup to send echo 1 > /proc/acpi/sleep

Is there anything I can send to the list to help with diagnostics?

Quoted 8 lines
Quoted 5 lines

Screen staying on is normal. Does it wake up
when you press power?

When I press power to restore the console is always locked up tight. I cannot use keyboard or mouse, but if I am in X my X console usually works after restore, but not all the time.

Hmm, strange.

Quoted 1 line

How can I make the screen blank when I go into sleep?

No idea, there is not much about screenblanking in acpi specs.

Signature · 8 lines
Casualities in World Trade Center: ~3k dead inside the building,
cryptography in U.S.A. and free speech in Czech Republic.


-------------------------------------------------------
This sf.net email is sponsored by: To learn the basics of securing 
your web site with SSL, click here to get a FREE TRIAL of a Thawte 
Server Certificate: http://www.gothawte.com/rd524.html

A message that is not in the archive (sent off-list or not yet received): 20021115190016.GA31990-jyMamyUUXNJG4ohzP4jBZS1Fcj925eT/@public.gmane.org

#7 lore raw
Quoted 19 lines · Pavel Machek

Hi!

Quoted 9 lines
Quoted 9 lines
Quoted 8 lines

I am using acpi-20021101 on a dell inspiron 8100. When I try to go into S1 sleep computer does not sleep. Te power button blinks on and off, which is unusal, and the screen never blanks, even when I close the lid. I do have acpid setup to send echo 1 > /proc/acpi/sleep

Is there anything I can send to the list to help with diagnostics?

Quoted 8 lines
Quoted 5 lines

Screen staying on is normal. Does it wake up
when you press power?

When I press power to restore the console is always locked up tight. I cannot use keyboard or mouse, but if I am in X my X console usually works after restore, but not all the time.

Quoted 6 lines

Hmm, strange.

Quoted 1 line

How can I make the screen blank when I go into sleep?

No idea, there is not much about screenblanking in acpi specs.

If you are lucky, try first DPMS. If it doesn't work, you have to know what kind of video chipset you have, then you should be able to control the Flat Panel controller (should be attached to the I2C interface of the video chipset), or control it via some register (again, of the video chip).

Signature · 9 lines
Ducrot Bruno
http://www.poupinou.org        Page profaissionelle
http://toto.tu-me-saoules.com  Haume page


-------------------------------------------------------
This sf.net email is sponsored by: To learn the basics of securing 
your web site with SSL, click here to get a FREE TRIAL of a Thawte 
Server Certificate: http://www.gothawte.com/rd524.html

A message that is not in the archive (sent off-list or not yet received): 20021116133006.GA691-j6u/t2rXLliUoIHC/UFpr9i2O/[email protected]

#9 lore raw

Sreen blanking [was Re: acpi-20021101, Dell inspiron 8100 report.]

Hi!

Quoted 18 lines
Quoted 18 lines
Quoted 17 lines
Quoted 5 lines
Quoted 5 lines

I am using acpi-20021101 on a dell inspiron 8100. When I try to go into S1 sleep computer does not sleep. Te power button blinks on and off, which is unusal, and the screen never blanks, even when I close the lid. I do have acpid setup to send echo 1 > /proc/acpi/sleep

Quoted 9 lines
Quoted 3 lines

Is there anything I can send to the list to help with diagnostics?

Screen staying on is normal. Does it wake up
when you press power?

When I press power to restore the console is always locked up tight. I cannot use keyboard or mouse, but if I am in X my X console usually works after restore, but not all the time.

Quoted 8 lines
Quoted 6 lines

Hmm, strange.

Quoted 1 line

How can I make the screen blank when I go into sleep?

No idea, there is not much about screenblanking in acpi specs.

If you are lucky, try first DPMS. If it doesn't work, you have to

DPMS does not work at least on toshiba 4030cdt. (tried long and hard).

Quoted 4 lines

know what kind of video chipset you have, then you should be able to control the Flat Panel controller (should be attached to the I2C interface of the video chipset), or control it via some register (again, of the video chip).

This looks like awfull lot of work, special for each notebook :-(. Intel should define control method for blanking screen.
Pavel

Signature · 8 lines
Worst form of spam? Adding advertisment signatures ala sourceforge.net.
What goes next? Inserting advertisment *into* email?


-------------------------------------------------------
This sf.net email is sponsored by: To learn the basics of securing 
your web site with SSL, click here to get a FREE TRIAL of a Thawte 
Server Certificate: http://www.gothawte.com/rd524.html

A message that is not in the archive (sent off-list or not yet received): 20021116152354.GB293-I/[email protected]

#11 lore raw

Re: Sreen blanking [was Re: acpi-20021101, Dell inspiron 8100 report.]

Quoted 22 lines · Pavel Machek

Hi!

Quoted 20 lines
Quoted 20 lines
Quoted 9 lines
Quoted 9 lines
Quoted 8 lines

I am using acpi-20021101 on a dell inspiron 8100. When I try to go into S1 sleep computer does not sleep. Te power button blinks on and off, which is unusal, and the screen never blanks, even when I close the lid. I do have acpid setup to send echo 1 > /proc/acpi/sleep

Is there anything I can send to the list to help with diagnostics?

Quoted 8 lines
Quoted 5 lines

Screen staying on is normal. Does it wake up
when you press power?

When I press power to restore the console is always locked up tight. I cannot use keyboard or mouse, but if I am in X my X console usually works after restore, but not all the time.

Hmm, strange.

Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
Quoted 1 line

How can I make the screen blank when I go into sleep?

No idea, there is not much about screenblanking in acpi specs.

If you are lucky, try first DPMS. If it doesn't work, you have to

DPMS does not work at least on toshiba 4030cdt. (tried long and hard).

That why I say 'If you are lucky'... I was not so lucky too, unless
I got the omke.pl for this purpose..

Quoted 8 lines
Quoted 5 lines

know what kind of video chipset you have, then you should be able to control the Flat Panel controller (should be attached to the I2C interface of the video chipset), or control it via some register (again, of the video chip).

This looks like awfull lot of work, special for each notebook :-(. Intel should define control method for blanking screen.

There is already DPMS for this purpose. The only issue is OEM. AFAIK, this should also be per video chipset, not per notebook (in theory, of course...)

Signature · 9 lines
Ducrot Bruno
http://www.poupinou.org        Page profaissionelle
http://toto.tu-me-saoules.com  Haume page


-------------------------------------------------------
This sf.net email is sponsored by: To learn the basics of securing 
your web site with SSL, click here to get a FREE TRIAL of a Thawte 
Server Certificate: http://www.gothawte.com/rd524.html