Protocol error
Hi guys,
Ever since I started using AX25 tools I seem to be getting the foolowing error message from the kernel in /var/log/messages.
Nov 17 18:15:21 nest-0 kernel: protocol 0000 is buggy, dev ax0
This message keep repeating quite often.
Now this is probably a warning and it does not seem to cause any problems to my AX25 operation. Has anyone seen this messsage in his setup and what does it mean please?
I use SUSE 7.3 with 2.4.10-GB kernel and I use the distribution AX25 tools. On port ax0 I do not use TCP/IP, just AX25 because it is the ax port for my APRSD. The funny thing is that I do not get any reports on interface ax1 where I use TCP/IP and it has a pk6 link to AMPRnet. I also have to tell you that I have assigned an IP address to port ax0 as well, but I do not use any IP on ax0.
Any ideas would be much appreciated.
73 de Demetre SV1UY
e-mail [email protected]
http://www.athnet.ampr.org/~sv1uy
On Sun, 17 Nov 2002, Demetre Valaris wrote:
Hi Demetre,
I have the same problem for a loooong time. I also have lots af messages
like this one in my /var/log/messages:
Nov 18 00:34:36 hamradio kernel: NET: 8 messages suppressed.
These messages arrive with a pace of 1 message every +-4 secs. I suppose that the fact that I have all the traffic passing trough
linuxnet makes this messages lots of times. (about one error for each frame received/sent).
73,
Jorge Matias
CT2HBZ
Quoted 31 lines
Hi guys,
Ever since I started using AX25 tools I seem to be getting the foolowing error message from the kernel in
/var/log/messages.Nov 17 18:15:21 nest-0 kernel: protocol 0000 is buggy, dev ax0This message keep repeating quite often.
Now this is probably a warning and it does not seem to cause any problems to my AX25 operation. Has anyone seen this messsage in his setup and what does it mean please?
I use SUSE 7.3 with 2.4.10-GB kernel and I use the distribution AX25 tools. On port ax0 I do not use TCP/IP, just AX25 because it is the ax port for my APRSD. The funny thing is that I do not get any reports on interface ax1 where I use TCP/IP and it has a pk6 link to AMPRnet. I also have to tell you that I have assigned an IP address to port ax0 as well, but I do not use any IP on ax0.
Any ideas would be much appreciated.
73 de Demetre SV1UY
e-mail [email protected]
http://www.athnet.ampr.org/~sv1uy-
To unsubscribe from this list: send the line "unsubscribe linux-hams" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 9 lines · Jorge Matias
On Sun, 17 Nov 2002, Demetre Valaris wrote:
Hi Demetre,
I have the same problem for a loooong time. I also have lots af messages like
this one in my/var/log/messages:Nov 18 00:34:36 hamradio kernel: NET: 8 messages suppressed.
Quoted 8 lines
These messages arrive with a pace of 1 message every +-4 secs. I suppose that the fact that I have all the traffic passing trough
linuxnet makes this messages lots of times. (about one error for each frame received/sent).73,
Jorge Matias
CT2HBZ
Hi Jorge Matias,
Thanks for reply. I wonder if this causes any problems. At this end when I had a P133 AMD with 32MB RAm, sometimes my radio would key the TNC and TX nothing. Now I am not sure whether this is a TNC or computer problem. Eversince I upgraded my hardware to a faster PC (P433 Celeron with 128MB RAM) I have not observed this problem although the "protocol 0000 is buggy, dev ax0) is still there. I am not sure what caused the problem though, although it seems that the old slower PC with the 32MB RAM was at fault, but this problem was not persistent!!
73 de Demetre SV1UY
e-mail [email protected]
http://www.athnet.ampr.org/~sv1uy
Quoted 4 lines · Demetre Valaris
Quoted 4 lines
I have the same problem for a loooong time. I also have lots af messages like
this one in my/var/log/messages:Nov 18 00:34:36 hamradio kernel: NET: 8 messages suppressed.
...
Roumored that latest kernel (pre)release versions don't spit them out. At least HA5OB/Zoli was happy to see kernel 2.4.20-rc1 ceased complaining.
73... Sanyi
Signature · 2 lines
Dibuz Sandor | email: [email protected] Pecs, Hungary | AX.25: [email protected] | UIN: 81545608
Quoted 11 lines · Sandor Dibuz
Quoted 4 lines · Demetre Valaris
Quoted 4 lines
I have the same problem for a loooong time. I also have lots af messages like
this one in my/var/log/messages:Nov 18 00:34:36 hamradio kernel: NET: 8 messages suppressed....
Roumored that latest kernel (pre)release versions don't spit them out. At least HA5OB/Zoli was happy to see kernel 2.4.20-rc1 ceased complaining.
I'm very pleased to know that, because with all those messages in the
log is very difficult to track other errors.
73,
Jorge
CT2HBZ
Quoted 18 lines · Demetre Valaris
Quoted 14 lines · Jorge Matias
On Sun, 17 Nov 2002, Demetre Valaris wrote:
Hi Demetre,
I have the same problem for a loooong time. I also have lots af messages like
this one in my/var/log/messages:Nov 18 00:34:36 hamradio kernel: NET: 8 messages suppressed.These messages arrive with a pace of 1 message every +-4 secs. I suppose that the fact that I have all the traffic passing trough
linuxnet makes this messages lots of times. (about one error for each frame received/sent).
Quoted 8 lines
Quoted 3 lines
73,
Jorge Matias
CT2HBZHi Jorge Matias,
Thanks for reply. I wonder if this causes any problems. At this end when I had a P133 AMD with 32MB RAm, sometimes my radio would key the TNC and TX nothing.
I also have that TX problem too with my USCC modems.
All these problem occured to me when I had P133 with 64MB (Kernel
2.2.14). Now I have a PII/366 with 128MB and kernel 2.4.18 and the problem still exists but I think it doesn't affect the radio applications.
73,
Jorge
CT2HBZ
Quoted 9 lines · Demetre Valaris
Thanks for reply. I wonder if this causes any problems. At this end when I had a P133 AMD with 32MB RAm, sometimes my radio would key the TNC and TX nothing. Now I am not sure whether this is a TNC or computer problem. Eversince I upgraded my hardware to a faster PC (P433 Celeron with 128MB RAM) I have not observed this problem although the "protocol 0000 is buggy, dev ax0) is still there. I am not sure what caused the problem though, although it seems that the old slower PC with the 32MB RAM was at fault, but this problem was not persistent!!
Hi
We have here in OH1RCF 4 tnc's and only one is giving protocol is buggy info...Same as bad checsum messages...
I myself have only one tnc and i get every now and then bad checksum but no protocol buggy.
We are using 6pack in tnc's...And now we have started thinking that errormsg's migth come because of bad groundings..ie. Tnc's cases are grounded too lightly and RF could cause some weird things...
PC is something 333MHz and 64M ram in oh1rcf...I have amd xp-1700+ with 512M ram...
73 de Jarmo,OH1MRR