Skip to contentSkip to conversation

PATCH: Driver for the Epson SED13806 graphic controler

U-Boot-Users Pierre AUBERT 2 participants 3 messages Nov 20, 2002 – Nov 22, 2002

lore
Share & tools
lore

Pierre AUBERT

author
#0 lore raw

Hello everybody,

Please find attached a patch that add support for the Epson SED13806 graphic controller. This controller
is used on the Embedded Planet ECCX daughter board. Please see the RPXClassic.h file for the details
of the configuration.

This patch also adds the support of the BMP logo in cfb_console driver.

author
#1 lore raw
Quoted 21 lines · Pierre AUBERT

Hello everybody,

Please find attached a patch that add support for the Epson SED13806 graphic controller. This controller
is used on the Embedded Planet ECCX daughter board. Please see the RPXClassic.h file for the details
of the configuration.

This patch also adds the support of the BMP logo in cfb_console driver.

Quoted 1 line

From now, the cfb_console driver

was only able to display the logo included in the file logo_linux.h. The MPC8xx LCD driver use the logo
included in bmp_logo.h. This file is very easy to create because the tool bmp_logo is included in U-boot.
I saw that the video driver for the MPC8xx use another logo created by easy_logo. I think that it would be nie to use
only one file format in all the graphic drivers.
To use the BMP logo with the cfb_console driver, add #define CONFIG_VIDEO_BMP_LOGO in the board config
file (see RPXClassic.h).

Quoted 9 lines

This patch fixes also a warning in mkimage.c.

CHANGELOG:
* Patch by Pierre Aubert , 20 Nov 2002
Add driver for Epson SED13806 graphic controller. Add support for BMP logos in cfb_console driver.

Best regards

Here's the README patch that was forgotten in my last post

README 2002-11-21 14:06:50.000000000 +0100 renamed from README 2002-11-21 13:50:01.000000000 +0100 +8 -0
@@ -423,6 +423,9 @@ The following options need to be configu
                                                (requires CFG_CMD_DATE)
                        CONFIG_VIDEO_LOGO       display Linux logo in
                                                upper left corner
+                       CONFIG_VIDEO_BMP_LOGO   use bmp_logo.h instead of
+                                               linux_logo.h for logo.
+                                               Requires CONFIG_VIDEO_LOGO
                        CONFIG_CONSOLE_EXTRA_INFO
                                                addional board info beside
                                                the logo

@@ -710,6 +713,11 @@ The following options need to be configu
         16,7 Mill (24bit)     315       318       31b
                (i.e. setenv videomode 317; saveenv; reset;)
 
+               CONFIG_VIDEO_SED13806
+               Enable Epson SED13806 driver. This driver supports 8bpp and
+               16bpp modes defined by
+               CONFIG_VIDEO_SED13806_8BPP or CONFIG_VIDEO_SED13806_16BPP
+
 - LCD Support: CONFIG_LCD
 
                Define this to enable LCD support (for output to LCD
#2 lore raw

Dear Pierre,

Quoted 2 lines · in message <[email protected]> you wrote:

Here's the README patch that was forgotten in my last post

Thanks, added.

Viele Gr??e,
Best regards,

Wolfgang Denk

Signature · 5 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
...the increased productivity fostered by a friendly environment  and
quality  tools  is  essential  to  meet  ever  increasing demands for
software.               - M. D. McIlroy, E. N. Pinson and B. A. Tague