Skip to contentSkip to conversation

Problem on usnig BDI2000 with IBM PPC440 board

DISCUSSION Jin Cheng 3 participants 3 messages Nov 26, 2002

lore
Share & tools
lore

Jin Cheng

author
#0 lore raw

Hi,

I have a problem trying to use BDI2000 with IBM PPC440 reference board. When I use the configuration file provided by the Abatron to load the Linux kernel, the PC always stops at 0xc0000d40, which is "InstructionTLBError".

I am using the ppclinux-2.4.20pre.

Can anyone give me some advice on how to solve this problem?

Thanks.

Jin

Following is the script on BDI:

BDI>reset
- TARGET: processing user reset request
- TARGET: reseting target passed
- TARGET: processing target startup ....
- TARGET: processing target startup passed
BDI>load
Loading C:\osop4m_vm\440gp\samples\zImage.ebony , please wait .... Loading program file passed
BDI>info

    Target state      : debug mode
    Debug entry cause : JTAG stop request
    Current PC        : 0x01000000
    Current CR        : 0x228ffff2
    Current MSR       : 0x00000000
    Current LR        : 0x0100153c
BDI>go
BDI>halt
    Target state      : debug mode
    Debug entry cause : JTAG stop request
    Current PC        : 0xc0000d40
    Current CR        : 0x228ffff2
    Current MSR       : 0x00000000
    Current LR        : 0x0100153c
BDI>go
BDI>halt
    Target state      : debug mode
    Debug entry cause : JTAG stop request
    Current PC        : 0xc0000d40
    Current CR        : 0x228ffff2
    Current MSR       : 0x00000000
    Current LR        : 0x0100153c

BDI>

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#1 lore raw

Linux needs a proper boot context, i.e PPCBoot or some other boot loader to set up some important data structures that must be passed to the kernel in order for it to boot. You cannot simply load a kernel image from scratch and run it ('go' command).

For details, download PPCBoot (now called U-Boot) and look at the do_bootm() command.

-Chris Hallinan

Quoted 60 lines

-----Original Message-----
From: [email protected] [mailto:[email protected]]On Behalf Of Jin
Cheng
Sent: Monday, November 25, 2002 11:00 PM
To: [email protected]
Subject: Problem on usnig BDI2000 with IBM PPC440 board

Hi,

I have a problem trying to use BDI2000 with IBM PPC440 reference board.
When I use the configuration file provided by the Abatron to load the Linux kernel, the PC always stops at 0xc0000d40, which is "InstructionTLBError".

I am using the ppclinux-2.4.20pre.

Can anyone give me some advice on how to solve this problem?

Thanks.

Jin

Following is the script on BDI:

BDI>reset
- TARGET: processing user reset request
- TARGET: reseting target passed
- TARGET: processing target startup ....
- TARGET: processing target startup passed
BDI>load
Loading C:\osop4m_vm\440gp\samples\zImage.ebony , please wait .... Loading program file passed
BDI>info

    Target state      : debug mode
    Debug entry cause : JTAG stop request
    Current PC        : 0x01000000
    Current CR        : 0x228ffff2
    Current MSR       : 0x00000000
    Current LR        : 0x0100153c
BDI>go
BDI>halt
    Target state      : debug mode
    Debug entry cause : JTAG stop request
    Current PC        : 0xc0000d40
    Current CR        : 0x228ffff2
    Current MSR       : 0x00000000
    Current LR        : 0x0100153c
BDI>go
BDI>halt
    Target state      : debug mode
    Debug entry cause : JTAG stop request
    Current PC        : 0xc0000d40
    Current CR        : 0x228ffff2
    Current MSR       : 0x00000000
    Current LR        : 0x0100153c
Quoted 3 lines

BDI>

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#2 lore raw

building walnut kernel, '_machine redefined' warning

yesterday afternoon I cloned the bitkeeper tree,
did a make walnut_config,
make menuconfig
saved the configuration,
did a make dep
and make vmlinux

and get the following redefininition for _machine:

In file included from /home/mpilon/linuxppc_2_4_devel_bk_405pm/include/linux/modversions.h:221,
from
/home/mpilon/linuxppc_2_4_devel_bk_405pm/include/linux/module.h:21,

                 from printk.c:26:

/home/mpilon/linuxppc_2_4_devel_bk_405pm/include/linux/modules/ppc_ksyms.ver:204:
warning: `_machine' redefined /home/mpilon/linuxppc_2_4_devel_bk_405pm/include/asm/processor.h:801:
warning: this is the location of the previous definition

have I missed a step, is this broken or benign?

the rsync tree I pulled earlier doesn't display this behavior ...

Mark

--
Mark Pilon
Minolta-QMS

P.O. Box 37
325 Dawson County Road 227
Fallon, MT. 59326-0037
1-406-486-5539 (primary voice line)
1-406-853-0433 (cell)

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/