Skip to contentSkip to conversation

How to change a packet's arriving interface

DISCUSSION Jason Liao 1 participant 1 message Dec 4, 2002

lore
Share & tools
lore

Jason Liao

author
#0 lore raw

Hi,

I have a firewall running iptables with 3 interfaces: LAN, WAN and DMZ. The LAN IP address is 10.0.0.1/24, WAN 66.134.34.157/28, and DMZ 66.134.34.249/28. The WAN interface connects to the Internet and the DMZ interface connects to a stub network.

When someone sends a packet to the IP address of the DMZ interface from the Internet, the packet x.x.x.x->66.134.34.249 arrives at the WAN interface. I want to know if there is a way using iptables (maybe with other tools such as iproute2) to make this packet to appear as if it arrives at the DMZ interface. The packet itself should not be modified. I looked at the mangle table but could not figure out if it is the right direction.

Thanks in advance.

Jason Liao