Skip to contentSkip to conversation

823 Video Controller Driver - where ?

DISCUSSION Steve Rossi 3 participants 3 messages Dec 13, 2002

lore
Share & tools
lore
#0 lore raw

I've seen some reference on the list regarding a driver for the 823 Video Controller -
i.e.
http://lists.linuxppc.org/results.html?restrict=linuxppc-embedded&words=vid823
however I've been unable to locate the source to vid823.c apparently this question was asked before:
http://lists.linuxppc.org/linuxppc-embedded/200201/msg00164.html
and the answer was that its in the 2_4_devel tree, but I was unable to find it in a recent snapshot of the tree (I'm unable to get the tree from the bitkeeper repository due to a problem in bitkeeper 3.0 related to http proxy with authentication - but thats another story!) so I got the snapshot from http://ppckernel.org/tree.php?id=5
All I could find was the RPX framebuffer driver rpxfb.c for various LCD panels using the LCD controller..
I'm looking for a driver for the video controller to output to an NTSC encoder. Am I just missing something?
Anyone know where I can get vid823.c (or whatever it might be called now) and whether its a true framebuffer driver?

Regards,
Steve

--
-------------------------------------------------------
Steven K. Rossi [email protected]
Principal Staff Engineer
Multimedia Communications Research Laboratory
Motorola Labs
-------------------------------------------------------

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#1 lore raw

Dear Steve,

Quoted 6 lines · in message <[email protected]> you wrote:

I've seen some reference on the list regarding a driver for the 823 Video Controller -
i.e.
http://lists.linuxppc.org/results.html?restrict=linuxppc-embedded&words=vid823
however I've been unable to locate the source to vid823.c

It is my understanding that this driver is available with and for some EP board only, and obviously not available for free.

Quoted 4 lines

apparently this question was asked before:
http://lists.linuxppc.org/linuxppc-embedded/200201/msg00164.html
and the answer was that its in the 2_4_devel tree, but I was unable to find it in a recent snapshot of the tree (I'm unable to get the tree

I haven't found anything either when I searched some time ago.

Quoted 4 lines

I'm looking for a driver for the video controller to output to an NTSC encoder. Am I just missing something?
Anyone know where I can get vid823.c (or whatever it might be called now) and whether its a true framebuffer driver?

We have a video controller driver in our source tree (module linux-2.4 on our CVS server), see arch/ppc/8xx_io/video823.c

Note: the code relies on some initialization performed by the U-Boot boot loader, and it has never been tested yet with NTSC. But it should be a starting point at least.

And yes, it is a true framebuffer driver, although it uses the awkward YUYV video mode format only.

Hope this helps.

Best regards,

Wolfgang Denk

--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: [email protected]
God may be subtle, but He isn't plain mean. - Albert Einstein

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#2 lore raw
In reply to Steve Rossi
Quoted 10 lines · Steve Rossi

I've seen some reference on the list regarding a driver for the 823 Video Controller -
i.e.
http://lists.linuxppc.org/results.html?restrict=linuxppc-embedded&words=vid823
however I've been unable to locate the source to vid823.c apparently this question was asked before:
http://lists.linuxppc.org/linuxppc-embedded/200201/msg00164.html
and the answer was that its in the 2_4_devel tree, but I was unable to find it in a recent snapshot of the tree (I'm unable to get the tree from the bitkeeper repository due to a problem in bitkeeper 3.0 related

Quoted 8 lines

to http proxy with authentication - but thats another story!) so I got the snapshot from http://ppckernel.org/tree.php?id=5
All I could find was the RPX framebuffer driver rpxfb.c for various LCD panels using the LCD controller..
I'm looking for a driver for the video controller to output to an NTSC encoder. Am I just missing something?
Anyone know where I can get vid823.c (or whatever it might be called now) and whether its a true framebuffer driver?

Recently we have ported a video driver to the MPC823 using the video encoder AD7176. The problem is, that the pixels data in the framebuffer must have the YUV or Y-Cb-Y-Cr-Format which is rarely used, at least I have not found any support in Linux or Microwindows. You can find the port on our linux-2.4 CVS tree (see http://www.denx.de/re/linux.html).
Check for "arch/ppc_8xx/video823.c" and "drivers/video/fbcon-yuv.c".

Hope it helps,

Wolfgang.

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/