Remove Rules.make from Makefiles (3/3)
Subsystems (41)
PATCH 1/1 Remove Rules.make from Makefiles (3/3)
Makefiles no longer need to include Rules.make, which is currently an empty file. This patch removes it from the remaining Makefiles, and removes the empty Rules.make file.
Rules.make +0 -1
@@ -1 +0,0 @@ -
crypto/Makefile +0 -2
@@ -22,5 +22,3 @@ obj-$(CONFIG_CRYPTO_SERPENT) += serpent.o obj-$(CONFIG_CRYPTO_TEST) += tcrypt.o - -include $(TOPDIR)/Rules.make
fs/Makefile +0 -2
@@ -94,5 +94,3 @@ obj-$(CONFIG_XFS_FS) += xfs/ obj-$(CONFIG_AFS_FS) += afs/ obj-$(CONFIG_BEFS_FS) += befs/ - -include $(TOPDIR)/Rules.make
fs/adfs/Makefile +0 -2
@@ -5,5 +5,3 @@ obj-$(CONFIG_ADFS_FS) += adfs.o adfs-objs := dir.o dir_f.o dir_fplus.o file.o inode.o map.o super.o - -include $(TOPDIR)/Rules.make
fs/affs/Makefile +0 -2
@@ -7,5 +7,3 @@ obj-$(CONFIG_AFFS_FS) += affs.o affs-objs := super.o namei.o inode.o file.o dir.o amigaffs.o bitmap.o symlink.o - -include $(TOPDIR)/Rules.make
fs/afs/Makefile +0 -2
@@ -24,5 +24,3 @@ volume.o obj-$(CONFIG_AFS_FS) := kafs.o - -include $(TOPDIR)/Rules.make
fs/autofs/Makefile +0 -2
@@ -5,5 +5,3 @@ obj-$(CONFIG_AUTOFS_FS) += autofs.o autofs-objs := dirhash.o init.o inode.o root.o symlink.o waitq.o - -include $(TOPDIR)/Rules.make
fs/autofs4/Makefile +0 -2
@@ -5,5 +5,3 @@ obj-$(CONFIG_AUTOFS4_FS) += autofs4.o autofs4-objs := init.o inode.o root.o symlink.o waitq.o expire.o - -include $(TOPDIR)/Rules.make
fs/befs/Makefile +0 -2
@@ -11,5 +11,3 @@ obj-$(CONFIG_BEFS_FS) += befs.o befs-objs := datastream.o btree.o super.o inode.o debug.o io.o linuxvfs.o - -include $(TOPDIR)/Rules.make
fs/bfs/Makefile +0 -2
@@ -5,5 +5,3 @@ obj-$(CONFIG_BFS_FS) += bfs.o bfs-objs := inode.o file.o dir.o - -include $(TOPDIR)/Rules.make
fs/cifs/Makefile +0 -2
@@ -4,5 +4,3 @@ obj-$(CONFIG_CIFS) += cifs.o cifs-objs := cifsfs.o cifssmb.o cifs_debug.o connect.o dir.o file.o inode.o link.o misc.o netmisc.o smbdes.o smbencrypt.o transport.o asn1.o md4.o md5.o cifs_unicode.o nterr.o - -include $(TOPDIR)/Rules.make
fs/coda/Makefile +0 -3
@@ -10,6 +10,3 @@ # If you want debugging output, please uncomment the following line. # EXTRA_CFLAGS += -DDEBUG -DDEBUG_SMB_MALLOC=1 - -include $(TOPDIR)/Rules.make -
fs/cramfs/Makefile +0 -2
@@ -5,5 +5,3 @@ obj-$(CONFIG_CRAMFS) += cramfs.o cramfs-objs := inode.o uncompress.o - -include $(TOPDIR)/Rules.make
fs/devfs/Makefile +0 -3
@@ -13,9 +13,6 @@ TOPDIR = ../.. endif -include $(TOPDIR)/Rules.make - - # Rule to build documentation doc: base.c util.c @echo '$$PACKAGE devfs' > devfs.doc
fs/devpts/Makefile +0 -2
@@ -5,5 +5,3 @@ obj-$(CONFIG_DEVPTS_FS) += devpts.o devpts-objs := inode.o - -include $(TOPDIR)/Rules.make
fs/efs/Makefile +0 -2
@@ -5,5 +5,3 @@ obj-$(CONFIG_EFS_FS) += efs.o efs-objs := super.o inode.o namei.o dir.o file.o symlink.o - -include $(TOPDIR)/Rules.make
fs/exportfs/Makefile +0 -2
@@ -6,5 +6,3 @@ obj-$(CONFIG_EXPORTFS) += exportfs.o exportfs-objs := expfs.o - -include $(TOPDIR)/Rules.make
fs/ext2/Makefile +0 -2
@@ -16,5 +16,3 @@ ifeq ($(CONFIG_EXT2_FS_POSIX_ACL),y) ext2-objs += acl.o endif - -include $(TOPDIR)/Rules.make
fs/ext3/Makefile +0 -2
@@ -16,5 +16,3 @@ ifeq ($(CONFIG_EXT3_FS_POSIX_ACL),y) ext3-objs += acl.o endif - -include $(TOPDIR)/Rules.make
fs/fat/Makefile +0 -2
@@ -7,5 +7,3 @@ obj-$(CONFIG_FAT_FS) += fat.o fat-objs := cache.o dir.o file.o inode.o misc.o fatfs_syms.o - -include $(TOPDIR)/Rules.make
fs/freevxfs/Makefile +0 -2
@@ -6,5 +6,3 @@ freevxfs-objs := vxfs_bmap.o vxfs_fshead.o vxfs_immed.o vxfs_inode.o \ vxfs_lookup.o vxfs_olt.o vxfs_subr.o vxfs_super.o - -include $(TOPDIR)/Rules.make
fs/hfs/Makefile +0 -2
@@ -8,5 +8,3 @@ bnode.o brec.o btree.o catalog.o dir.o dir_cap.o dir_dbl.o \ dir_nat.o extent.o file.o file_cap.o file_hdr.o inode.o mdb.o \ part_tbl.o string.o super.o sysdep.o trans.o version.o - -include $(TOPDIR)/Rules.make
fs/hpfs/Makefile +0 -2
@@ -6,5 +6,3 @@ hpfs-objs := alloc.o anode.o buffer.o dentry.o dir.o dnode.o ea.o file.o \ inode.o map.o name.o namei.o super.o - -include $(TOPDIR)/Rules.make
fs/hugetlbfs/Makefile +0 -2
@@ -5,5 +5,3 @@ obj-$(CONFIG_HUGETLBFS) += hugetlbfs.o hugetlbfs-objs := inode.o - -include $(TOPDIR)/Rules.make
fs/intermezzo/Makefile +0 -3
@@ -9,6 +9,3 @@ journal_obdfs.o journal_reiserfs.o journal_tmpfs.o journal_xfs.o \ kml_reint.o kml_unpack.o methods.o presto.o psdev.o replicator.o \ super.o sysctl.o upcall.o vfs.o - - -include $(TOPDIR)/Rules.make
fs/isofs/Makefile +0 -2
@@ -8,5 +8,3 @@ isofs-objs-$(CONFIG_JOLIET) += joliet.o isofs-objs-$(CONFIG_ZISOFS) += compress.o isofs-objs := $(isofs-objs-y) - -include $(TOPDIR)/Rules.make
fs/jbd/Makefile +0 -3
@@ -7,6 +7,3 @@ obj-$(CONFIG_JBD) += jbd.o jbd-objs := transaction.o commit.o recovery.o checkpoint.o revoke.o journal.o - -include $(TOPDIR)/Rules.make -
fs/jffs/Makefile +0 -3
@@ -9,6 +9,3 @@ jffs-y := jffs_fm.o intrep.o inode-v23.o jffs-$(CONFIG_JFFS_PROC_FS) += jffs_proc.o jffs-objs := $(jffs-y) - -include $(TOPDIR)/Rules.make -
fs/jffs2/Makefile +0 -3
@@ -18,6 +18,3 @@ jffs2-objs := $(COMPR_OBJS) $(JFFS2_OBJS) $(VERS_OBJS) $(NAND_OBJS-y) \ $(LINUX_OBJS-$(VERSION)$(PATCHLEVEL)) - -include $(TOPDIR)/Rules.make -
fs/jfs/Makefile +0 -2
@@ -15,5 +15,3 @@ endif EXTRA_CFLAGS += -D_JFS_4K - -include $(TOPDIR)/Rules.make
fs/lockd/Makefile +0 -2
@@ -10,5 +10,3 @@ svcproc.o svcsubs.o mon.o xdr.o lockd_syms.o lockd-objs-$(CONFIG_LOCKD_V4) += xdr4.o svc4proc.o lockd-objs := $(lockd-objs-y) - -include $(TOPDIR)/Rules.make
fs/minix/Makefile +0 -2
@@ -5,5 +5,3 @@ obj-$(CONFIG_MINIX_FS) += minix.o minix-objs := bitmap.o itree_v1.o itree_v2.o namei.o inode.o file.o dir.o - -include $(TOPDIR)/Rules.make
fs/msdos/Makefile +0 -2
@@ -7,5 +7,3 @@ obj-$(CONFIG_MSDOS_FS) += msdos.o msdos-objs := namei.o msdosfs_syms.o - -include $(TOPDIR)/Rules.make
fs/ncpfs/Makefile +0 -2
@@ -17,5 +17,3 @@ # EXTRA_CFLAGS += -DDEBUG_NCP=1 CFLAGS_ncplib_kernel.o := -finline-functions - -include $(TOPDIR)/Rules.make
fs/nfs/Makefile +0 -2
@@ -11,5 +11,3 @@ nfs-$(CONFIG_NFS_V4) += nfs4proc.o nfs4xdr.o nfs4state.o nfs4renewd.o nfs-$(CONFIG_NFS_DIRECTIO) += direct.o nfs-objs := $(nfs-y) - -include $(TOPDIR)/Rules.make
fs/nfsd/Makefile +0 -2
@@ -9,5 +9,3 @@ nfsd-$(CONFIG_NFSD_V3) += nfs3proc.o nfs3xdr.o nfsd-$(CONFIG_NFSD_V4) += nfs4proc.o nfs4xdr.o nfsd-objs := $(nfsd-y) - -include $(TOPDIR)/Rules.make
fs/nls/Makefile +0 -2
@@ -45,5 +45,3 @@ obj-$(CONFIG_NLS_KOI8_U) += nls_koi8-u.o nls_koi8-ru.o obj-$(CONFIG_NLS_ABC) += nls_abc.o obj-$(CONFIG_NLS_UTF8) += nls_utf8.o - -include $(TOPDIR)/Rules.make
fs/ntfs/Makefile +0 -3
@@ -14,6 +14,3 @@ ifeq ($(CONFIG_NTFS_RW),y) EXTRA_CFLAGS += -DNTFS_RW endif - -include $(TOPDIR)/Rules.make -
fs/openpromfs/Makefile +0 -2
@@ -5,5 +5,3 @@ obj-$(CONFIG_SUN_OPENPROMFS) += openpromfs.o openpromfs-objs := inode.o - -include $(TOPDIR)/Rules.make
fs/partitions/Makefile +0 -3
@@ -18,6 +18,3 @@ obj-$(CONFIG_ULTRIX_PARTITION) += ultrix.o obj-$(CONFIG_IBM_PARTITION) += ibm.o obj-$(CONFIG_EFI_PARTITION) += efi.o - -include $(TOPDIR)/Rules.make -
fs/proc/Makefile +0 -2
@@ -12,5 +12,3 @@ ifeq ($(CONFIG_PROC_DEVICETREE),y) proc-objs += proc_devtree.o endif - -include $(TOPDIR)/Rules.make
fs/qnx4/Makefile +0 -2
@@ -5,5 +5,3 @@ obj-$(CONFIG_QNX4FS_FS) += qnx4.o qnx4-objs := inode.o dir.o namei.o file.o bitmap.o truncate.o fsync.o - -include $(TOPDIR)/Rules.make
fs/ramfs/Makefile +0 -2
@@ -5,5 +5,3 @@ obj-$(CONFIG_RAMFS) += ramfs.o ramfs-objs := inode.o - -include $(TOPDIR)/Rules.make
fs/reiserfs/Makefile +0 -2
@@ -19,8 +19,6 @@ EXTRA_CFLAGS := -O1 endif -include $(TOPDIR)/Rules.make - TAGS: etags *.c
fs/romfs/Makefile +0 -2
@@ -5,5 +5,3 @@ obj-$(CONFIG_ROMFS_FS) += romfs.o romfs-objs := inode.o - -include $(TOPDIR)/Rules.make
fs/smbfs/Makefile +0 -2
@@ -17,8 +17,6 @@ #EXTRA_CFLAGS += -DDEBUG_SMB_TIMESTAMP #EXTRA_CFLAGS += -Werror -include $(TOPDIR)/Rules.make - # # Maintainer rules #
fs/sysfs/Makefile +0 -2
@@ -5,5 +5,3 @@ export-objs := inode.o obj-y := inode.o - -include $(TOPDIR)/Rules.make
fs/sysv/Makefile +0 -2
@@ -6,5 +6,3 @@ sysv-objs := ialloc.o balloc.o inode.o itree.o file.o dir.o \ namei.o super.o symlink.o - -include $(TOPDIR)/Rules.make
fs/udf/Makefile +0 -2
@@ -7,5 +7,3 @@ udf-objs := balloc.o dir.o file.o ialloc.o inode.o lowlevel.o namei.o \ partition.o super.o truncate.o symlink.o fsync.o \ crc.o directory.o misc.o udftime.o unicode.o - -include $(TOPDIR)/Rules.make
fs/ufs/Makefile +0 -2
@@ -6,5 +6,3 @@ ufs-objs := balloc.o cylinder.o dir.o file.o ialloc.o inode.o \ namei.o super.o symlink.o truncate.o util.o - -include $(TOPDIR)/Rules.make
fs/umsdos/Makefile +0 -2
@@ -6,8 +6,6 @@ umsdos-objs := dir.o inode.o ioctl.o mangle.o namei.o rdir.o emd.o -include $(TOPDIR)/Rules.make - p: proto *.c >/usr/include/linux/umsdos_fs.p
fs/vfat/Makefile +0 -2
@@ -7,5 +7,3 @@ obj-$(CONFIG_VFAT_FS) += vfat.o vfat-objs := namei.o vfatfs_syms.o - -include $(TOPDIR)/Rules.make
fs/xfs/Makefile +0 -2
@@ -157,5 +157,3 @@ endif CFLAGS_xfsidbg.o += -Iarch/$(ARCH)/kdb - -include $(TOPDIR)/Rules.make
init/Makefile +0 -2
@@ -7,8 +7,6 @@ # files to be removed upon make clean clean-files := ../include/linux/compile.h -include $(TOPDIR)/Rules.make - # dependencies on generated files need to be listed explicitly $(obj)/version.o: include/linux/compile.h
ipc/Makefile +0 -2
@@ -5,5 +5,3 @@ obj-y := util.o obj-$(CONFIG_SYSVIPC) += msg.o sem.o shm.o - -include $(TOPDIR)/Rules.make
kernel/Makefile +0 -2
@@ -31,5 +31,3 @@ # to get a correct value for the wait-channel (WCHAN in ps). --davidm CFLAGS_sched.o := $(PROFILING) -fno-omit-frame-pointer endif - -include $(TOPDIR)/Rules.make
lib/Makefile +0 -2
@@ -31,5 +31,3 @@ include $(TOPDIR)/drivers/usb/class/Makefile.lib include $(TOPDIR)/fs/Makefile.lib include $(TOPDIR)/net/bluetooth/bnep/Makefile.lib - -include $(TOPDIR)/Rules.make
lib/zlib_deflate/Makefile +0 -2
@@ -11,5 +11,3 @@ obj-$(CONFIG_ZLIB_DEFLATE) += zlib_deflate.o zlib_deflate-objs := deflate.o deftree.o deflate_syms.o - -include $(TOPDIR)/Rules.make
lib/zlib_inflate/Makefile +0 -2
@@ -19,5 +19,3 @@ zlib_inflate-objs := infblock.o infcodes.o inffast.o inflate.o \ inftrees.o infutil.o inflate_syms.o - -include $(TOPDIR)/Rules.make
net/802/Makefile +0 -2
@@ -15,5 +15,3 @@ obj-$(CONFIG_HIPPI) += hippi.o obj-$(CONFIG_IPX) += p8022.o psnap.o obj-$(CONFIG_ATALK) += p8022.o psnap.o - -include $(TOPDIR)/Rules.make
net/8021q/Makefile +0 -2
@@ -5,5 +5,3 @@ obj-$(CONFIG_VLAN_8021Q) += 8021q.o 8021q-objs := vlan.o vlanproc.o vlan_dev.o - -include $(TOPDIR)/Rules.make
net/Makefile +0 -2
@@ -41,5 +41,3 @@ obj-$(CONFIG_MODULES) += netsyms.o obj-$(CONFIG_SYSCTL) += sysctl_net.o endif - -include $(TOPDIR)/Rules.make
net/appletalk/Makefile +0 -3
@@ -8,6 +8,3 @@ appletalk-y := aarp.o ddp.o atalk_proc.o appletalk-$(CONFIG_SYSCTL) += sysctl_net_atalk.o - -include $(TOPDIR)/Rules.make -
net/atm/Makefile +0 -2
@@ -15,5 +15,3 @@ obj-$(CONFIG_ATM_LANE) += lec.o obj-$(CONFIG_ATM_MPOA) += mpoa.o obj-$(CONFIG_PPPOATM) += pppoatm.o - -include $(TOPDIR)/Rules.make
net/ax25/Makefile +0 -3
@@ -11,6 +11,3 @@ ax25_subr.o ax25_timer.o ax25_uid.o af_ax25.o ax25-$(CONFIG_AX25_DAMA_SLAVE) += ax25_ds_in.o ax25_ds_subr.o ax25_ds_timer.o ax25-$(CONFIG_SYSCTL) += sysctl_net_ax25.o - -include $(TOPDIR)/Rules.make -
net/bluetooth/Makefile +0 -2
@@ -11,5 +11,3 @@ obj-$(CONFIG_BT_BNEP) += bnep/ bluetooth-objs := af_bluetooth.o hci_core.o hci_conn.o hci_event.o hci_sock.o hci_proc.o lib.o syms.o - -include $(TOPDIR)/Rules.make
net/bluetooth/bnep/Makefile +0 -2
@@ -5,5 +5,3 @@ obj-$(CONFIG_BT_BNEP) += bnep.o bnep-objs := core.o sock.o netdev.o - -include $(TOPDIR)/Rules.make
net/bluetooth/rfcomm/Makefile +0 -2
@@ -6,5 +6,3 @@ rfcomm-y := core.o sock.o crc.o rfcomm-$(CONFIG_BT_RFCOMM_TTY) += tty.o - -include $(TOPDIR)/Rules.make
net/bridge/Makefile +0 -2
@@ -15,5 +15,3 @@ endif obj-$(CONFIG_BRIDGE_NF_EBTABLES) += netfilter/ - -include $(TOPDIR)/Rules.make
net/bridge/netfilter/Makefile +0 -1
@@ -17,4 +17,3 @@ obj-$(CONFIG_BRIDGE_EBT_DNAT) += ebt_dnat.o obj-$(CONFIG_BRIDGE_EBT_REDIRECT) += ebt_redirect.o obj-$(CONFIG_BRIDGE_EBT_MARK_T) += ebt_mark.o -include $(TOPDIR)/Rules.make
net/core/Makefile +0 -2
@@ -21,5 +21,3 @@ obj-$(CONFIG_NET_RADIO) += wireless.o # Ugly. I wish all wireless drivers were moved in drivers/net/wireless obj-$(CONFIG_NET_PCMCIA_RADIO) += wireless.o - -include $(TOPDIR)/Rules.make
net/decnet/Makefile +0 -3
@@ -5,6 +5,3 @@ decnet-$(CONFIG_DECNET_ROUTER) += dn_fib.o dn_rules.o dn_table.o decnet-$(CONFIG_DECNET_FW) += dn_fw.o decnet-y += sysctl_net_decnet.o - -include $(TOPDIR)/Rules.make -
net/econet/Makefile +0 -3
@@ -5,6 +5,3 @@ obj-$(CONFIG_ECONET) += econet.o econet-objs := af_econet.o - -include $(TOPDIR)/Rules.make -
net/ethernet/Makefile +0 -2
@@ -6,5 +6,3 @@ obj-$(CONFIG_SYSCTL) += sysctl_net_ether.o obj-$(subst m,y,$(CONFIG_IPX)) += pe2.o obj-$(subst m,y,$(CONFIG_ATALK)) += pe2.o - -include $(TOPDIR)/Rules.make
net/ipv4/Makefile +0 -2
@@ -23,5 +23,3 @@ obj-$(CONFIG_XFRM_USER) += xfrm_user.o obj-y += xfrm_policy.o xfrm_state.o xfrm_input.o - -include $(TOPDIR)/Rules.make
net/ipv4/netfilter/Makefile +0 -2
@@ -93,5 +93,3 @@ obj-$(CONFIG_IP_NF_COMPAT_IPFWADM) += ipfwadm.o obj-$(CONFIG_IP_NF_QUEUE) += ip_queue.o - -include $(TOPDIR)/Rules.make
net/ipv6/Makefile +0 -2
@@ -13,5 +13,3 @@ ip6_flowlabel.o ipv6_syms.o obj-$(CONFIG_NETFILTER) += netfilter/ - -include $(TOPDIR)/Rules.make
net/ipv6/netfilter/Makefile +0 -2
@@ -18,5 +18,3 @@ obj-$(CONFIG_IP6_NF_TARGET_MARK) += ip6t_MARK.o obj-$(CONFIG_IP6_NF_QUEUE) += ip6_queue.o obj-$(CONFIG_IP6_NF_TARGET_LOG) += ip6t_LOG.o - -include $(TOPDIR)/Rules.make
net/ipx/Makefile +0 -2
@@ -6,5 +6,3 @@ ipx-y := af_ipx.o ipx_proc.o ipx-$(CONFIG_SYSCTL) += sysctl_net_ipx.o - -include $(TOPDIR)/Rules.make
net/irda/Makefile +0 -2
@@ -15,5 +15,3 @@ discovery.o parameters.o irsyms.o irda-$(CONFIG_PROC_FS) += irproc.o irda-$(CONFIG_SYSCTL) += irsysctl.o - -include $(TOPDIR)/Rules.make
net/irda/ircomm/Makefile +0 -3
@@ -8,6 +8,3 @@ ircomm-objs := ircomm_core.o ircomm_event.o ircomm_lmp.o ircomm_ttp.o ircomm-tty-objs := ircomm_tty.o ircomm_tty_attach.o ircomm_tty_ioctl.o ircomm_param.o - -include $(TOPDIR)/Rules.make -
net/irda/irlan/Makefile +0 -2
@@ -5,5 +5,3 @@ obj-$(CONFIG_IRLAN) += irlan.o irlan-objs := irlan_common.o irlan_eth.o irlan_event.o irlan_client.o irlan_provider.o irlan_filter.o irlan_provider_event.o irlan_client_event.o - -include $(TOPDIR)/Rules.make
net/irda/irnet/Makefile +0 -2
@@ -5,5 +5,3 @@ obj-$(CONFIG_IRNET) += irnet.o irnet-objs := irnet_ppp.o irnet_irda.o - -include $(TOPDIR)/Rules.make
net/key/Makefile +0 -2
@@ -3,5 +3,3 @@ # obj-$(CONFIG_NET_KEY) += af_key.o - -include $(TOPDIR)/Rules.make
net/lapb/Makefile +0 -3
@@ -7,6 +7,3 @@ obj-$(CONFIG_LAPB) += lapb.o lapb-objs := lapb_in.o lapb_out.o lapb_subr.o lapb_timer.o lapb_iface.o - -include $(TOPDIR)/Rules.make -
net/llc/Makefile +0 -2
@@ -21,5 +21,3 @@ # Objects that export symbols. export-objs := llc_if.o - -include $(TOPDIR)/Rules.make
net/netlink/Makefile +0 -2
@@ -4,5 +4,3 @@ obj-y := af_netlink.o obj-$(CONFIG_NETLINK_DEV) += netlink_dev.o - -include $(TOPDIR)/Rules.make
net/netrom/Makefile +0 -3
@@ -7,6 +7,3 @@ netrom-y := af_netrom.o nr_dev.o nr_in.o nr_loopback.o \ nr_out.o nr_route.o nr_subr.o nr_timer.o netrom-$(CONFIG_SYSCTL) += sysctl_net_netrom.o - -include $(TOPDIR)/Rules.make -
net/packet/Makefile +0 -2
@@ -3,5 +3,3 @@ # obj-$(CONFIG_PACKET) += af_packet.o - -include $(TOPDIR)/Rules.make
net/rose/Makefile +0 -3
@@ -7,6 +7,3 @@ rose-y := af_rose.o rose_dev.o rose_in.o rose_link.o rose_loopback.o \ rose_out.o rose_route.o rose_subr.o rose_timer.o rose-$(CONFIG_SYSCTL) += sysctl_net_rose.o - -include $(TOPDIR)/Rules.make -
net/rxrpc/Makefile +0 -2
@@ -23,5 +23,3 @@ endif obj-$(CONFIG_RXRPC) := rxrpc.o - -include $(TOPDIR)/Rules.make
net/sched/Makefile +0 -2
@@ -28,5 +28,3 @@ obj-$(CONFIG_NET_CLS_RSVP6) += cls_rsvp6.o obj-$(CONFIG_NET_CLS_ROUTE4) += cls_route.o obj-$(CONFIG_NET_CLS_FW) += cls_fw.o - -include $(TOPDIR)/Rules.make
net/sctp/Makefile +0 -2
@@ -22,5 +22,3 @@ sctp-$(CONFIG_SYSCTL) += sysctl.o sctp-$(subst m,y,$(CONFIG_IPV6)) += ipv6.o - -include $(TOPDIR)/Rules.make
net/sunrpc/Makefile +0 -2
@@ -13,5 +13,3 @@ sunrpc_syms.o cache.o sunrpc-$(CONFIG_PROC_FS) += stats.o sunrpc-$(CONFIG_SYSCTL) += sysctl.o - -include $(TOPDIR)/Rules.make
net/unix/Makefile +0 -3
@@ -6,6 +6,3 @@ unix-y := af_unix.o garbage.o unix-$(CONFIG_SYSCTL) += sysctl_net_unix.o - -include $(TOPDIR)/Rules.make -
net/wanrouter/Makefile +0 -2
@@ -7,5 +7,3 @@ obj-$(CONFIG_WAN_ROUTER) += wanrouter.o wanrouter-objs := wanproc.o wanmain.o - -include $(TOPDIR)/Rules.make
net/x25/Makefile +0 -3
@@ -8,6 +8,3 @@ x25_link.o x25_out.o x25_route.o x25_subr.o \ x25_timer.o x25_proc.o x25-$(CONFIG_SYSCTL) += sysctl_net_x25.o - -include $(TOPDIR)/Rules.make -
scripts/kconfig/Makefile +0 -2
@@ -21,8 +21,6 @@ clean-files := libkconfig.so lkc_defs.h qconf.moc .tmp_qtcheck \ zconf.tab.c zconf.tab.h lex.zconf.c -include $(TOPDIR)/Rules.make - # generated files seem to need this to find local include files HOSTCFLAGS_lex.zconf.o := -I$(src) HOSTCFLAGS_zconf.tab.o := -I$(src)
security/Makefile +0 -2
@@ -14,5 +14,3 @@ obj-$(CONFIG_SECURITY) += security.o dummy.o obj-$(CONFIG_SECURITY_CAPABILITIES) += capability.o obj-$(CONFIG_SECURITY_ROOTPLUG) += root_plug.o - -include $(TOPDIR)/Rules.make
sound/Makefile +0 -2
@@ -12,5 +12,3 @@ endif soundcore-objs := sound_core.o sound_firmware.o - -include $(TOPDIR)/Rules.make
sound/arm/Makefile +0 -2
@@ -6,5 +6,3 @@ # Toplevel Module Dependency obj-$(CONFIG_SND_SA11XX_UDA1341) += snd-sa11xx-uda1341.o - -include $(TOPDIR)/Rules.make
sound/core/Makefile +0 -2
@@ -103,5 +103,3 @@ obj-$(CONFIG_SND_USB_AUDIO) += snd-pcm.o snd-timer.o snd.o snd-rawmidi.o obj-m := $(sort $(obj-m)) - -include $(TOPDIR)/Rules.make
sound/core/ioctl32/Makefile +0 -2
@@ -9,5 +9,3 @@ endif obj-$(CONFIG_SND_BIT32_EMUL) += snd-ioctl32.o - -include $(TOPDIR)/Rules.make
sound/core/oss/Makefile +0 -2
@@ -12,5 +12,3 @@ obj-$(CONFIG_SND_MIXER_OSS) += snd-mixer-oss.o obj-$(CONFIG_SND_PCM_OSS) += snd-pcm-oss.o - -include $(TOPDIR)/Rules.make
sound/core/seq/Makefile +0 -2
@@ -76,5 +76,3 @@ obj-$(CONFIG_SND_USB_AUDIO) += snd-seq.o snd-seq-device.o snd-seq-midi-event.o obj-m := $(sort $(obj-m)) - -include $(TOPDIR)/Rules.make
sound/core/seq/instr/Makefile +0 -2
@@ -42,5 +42,3 @@ obj-$(CONFIG_SND_YMFPCI) += snd-ainstr-fm.o obj-m := $(sort $(obj-m)) - -include $(TOPDIR)/Rules.make
sound/core/seq/oss/Makefile +0 -2
@@ -10,5 +10,3 @@ ifeq ($(CONFIG_SND_SEQUENCER_OSS),y) obj-$(CONFIG_SND_SEQUENCER) += snd-seq-oss.o endif - -include $(TOPDIR)/Rules.make
sound/drivers/Makefile +0 -2
@@ -15,5 +15,3 @@ obj-$(CONFIG_SND_MTPAV) += snd-mtpav.o obj-$(CONFIG_SND) += opl3/ mpu401/ - -include $(TOPDIR)/Rules.make
sound/drivers/mpu401/Makefile +0 -2
@@ -41,5 +41,3 @@ obj-$(CONFIG_SND_YMFPCI) += snd-mpu401-uart.o obj-m := $(sort $(obj-m)) - -include $(TOPDIR)/Rules.make
sound/drivers/opl3/Makefile +0 -2
@@ -66,5 +66,3 @@ endif obj-m := $(sort $(obj-m)) - -include $(TOPDIR)/Rules.make
sound/i2c/Makefile +0 -2
@@ -16,5 +16,3 @@ # Toplevel Module Dependency obj-$(CONFIG_SND_INTERWAVE_STB) += snd-tea6330t.o snd-i2c.o obj-$(CONFIG_SND_ICE1712) += snd-cs8427.o snd-i2c.o - -include $(TOPDIR)/Rules.make
sound/i2c/l3/Makefile +0 -2
@@ -8,5 +8,3 @@ # Module Dependency obj-$(CONFIG_SND_SA11XX_UDA1341) += snd-uda1341.o - -include $(TOPDIR)/Rules.make
sound/isa/Makefile +0 -2
@@ -22,5 +22,3 @@ obj-$(CONFIG_SND) += ad1816a/ ad1848/ cs423x/ es1688/ gus/ opti9xx/ \ sb/ wavefront/ - -include $(TOPDIR)/Rules.make
sound/isa/ad1816a/Makefile +0 -2
@@ -10,5 +10,3 @@ # Toplevel Module Dependency obj-$(CONFIG_SND_AD1816A) += snd-ad1816a.o snd-ad1816a-lib.o - -include $(TOPDIR)/Rules.make
sound/isa/ad1848/Makefile +0 -2
@@ -15,5 +15,3 @@ obj-$(CONFIG_SND_OPTI92X_AD1848) += snd-ad1848-lib.o obj-m := $(sort $(obj-m)) - -include $(TOPDIR)/Rules.make
sound/isa/cs423x/Makefile +0 -2
@@ -24,5 +24,3 @@ obj-$(CONFIG_SND_WAVEFRONT) += snd-cs4231-lib.o obj-m := $(sort $(obj-m)) - -include $(TOPDIR)/Rules.make
sound/isa/es1688/Makefile +0 -2
@@ -11,5 +11,3 @@ # Toplevel Module Dependency obj-$(CONFIG_SND_ES1688) += snd-es1688.o snd-es1688-lib.o obj-$(CONFIG_SND_GUSEXTREME) += snd-es1688-lib.o - -include $(TOPDIR)/Rules.make
sound/isa/gus/Makefile +0 -2
@@ -34,5 +34,3 @@ endif obj-m := $(sort $(obj-m)) - -include $(TOPDIR)/Rules.make
sound/isa/opti9xx/Makefile +0 -2
@@ -11,5 +11,3 @@ obj-$(CONFIG_SND_OPTI92X_AD1848) += snd-opti92x-ad1848.o obj-$(CONFIG_SND_OPTI92X_CS4231) += snd-opti92x-cs4231.o obj-$(CONFIG_SND_OPTI93X) += snd-opti93x.o - -include $(TOPDIR)/Rules.make
sound/isa/sb/Makefile +0 -2
@@ -33,5 +33,3 @@ endif obj-m := $(sort $(obj-m)) - -include $(TOPDIR)/Rules.make
sound/isa/wavefront/Makefile +0 -2
@@ -7,5 +7,3 @@ # Toplevel Module Dependency obj-$(CONFIG_SND_WAVEFRONT) += snd-wavefront.o - -include $(TOPDIR)/Rules.make
sound/oss/Makefile +0 -2
@@ -100,8 +100,6 @@ clean-files := maui_boot.h msndperm.c msndinit.c pndsperm.c pndspini.c \ pss_boot.h trix_boot.h -include $(TOPDIR)/Rules.make - # Firmware files that need translation # # The translated files are protected by a file that keeps track
sound/oss/cs4281/Makefile +0 -2
@@ -4,5 +4,3 @@ obj-$(CONFIG_SOUND_CS4281) += cs4281.o cs4281-objs += cs4281m.o - -include $(TOPDIR)/Rules.make
sound/oss/dmasound/Makefile +0 -2
@@ -8,5 +8,3 @@ obj-$(CONFIG_DMASOUND_AWACS) += dmasound_core.o dmasound_awacs.o obj-$(CONFIG_DMASOUND_PAULA) += dmasound_core.o dmasound_paula.o obj-$(CONFIG_DMASOUND_Q40) += dmasound_core.o dmasound_q40.o - -include $(TOPDIR)/Rules.make
sound/oss/emu10k1/Makefile +0 -2
@@ -15,5 +15,3 @@ ifdef CONFIG_MIDI_EMU10K1 EXTRA_CFLAGS += -DEMU10K1_SEQUENCER endif - -include $(TOPDIR)/Rules.make
sound/pci/Makefile +0 -2
@@ -35,5 +35,3 @@ obj-$(CONFIG_SND_VIA82XX) += snd-via82xx.o obj-$(CONFIG_SND) += ac97/ ali5451/ cs46xx/ emu10k1/ korg1212/ nm256/ rme9652/ trident/ ymfpci/ ice1712/ - -include $(TOPDIR)/Rules.make
sound/pci/ac97/Makefile +0 -2
@@ -26,5 +26,3 @@ obj-$(CONFIG_SND_YMFPCI) += snd-ac97-codec.o obj-m := $(sort $(obj-m)) - -include $(TOPDIR)/Rules.make
sound/pci/ali5451/Makefile +0 -2
@@ -7,5 +7,3 @@ # Toplevel Module Dependency obj-$(CONFIG_SND_ALI5451) += snd-ali5451.o - -include $(TOPDIR)/Rules.make
sound/pci/cs46xx/Makefile +0 -2
@@ -10,5 +10,3 @@ # Toplevel Module Dependency obj-$(CONFIG_SND_CS46XX) += snd-cs46xx.o - -include $(TOPDIR)/Rules.make
sound/pci/emu10k1/Makefile +0 -2
@@ -15,5 +15,3 @@ ifeq ($(subst m,y,$(CONFIG_SND_SEQUENCER)),y) obj-$(CONFIG_SND_EMU10K1) += snd-emu10k1-synth.o endif - -include $(TOPDIR)/Rules.make
sound/pci/ice1712/Makefile +0 -2
@@ -9,5 +9,3 @@ # Toplevel Module Dependency obj-$(CONFIG_SND_ICE1712) += snd-ice1712.o - -include $(TOPDIR)/Rules.make
sound/pci/korg1212/Makefile +0 -2
@@ -7,5 +7,3 @@ # Toplevel Module Dependency obj-$(CONFIG_SND_KORG1212) += snd-korg1212.o - -include $(TOPDIR)/Rules.make
sound/pci/nm256/Makefile +0 -2
@@ -7,5 +7,3 @@ # Toplevel Module Dependency obj-$(CONFIG_SND_NM256) += snd-nm256.o - -include $(TOPDIR)/Rules.make
sound/pci/rme9652/Makefile +0 -2
@@ -12,5 +12,3 @@ # Toplevel Module Dependency obj-$(CONFIG_SND_RME9652) += snd-rme9652.o snd-hammerfall-mem.o obj-$(CONFIG_SND_HDSP) += snd-hdsp.o snd-hammerfall-mem.o - -include $(TOPDIR)/Rules.make
sound/pci/trident/Makefile +0 -2
@@ -13,5 +13,3 @@ ifeq ($(subst m,y,$(CONFIG_SND_SEQUENCER)),y) obj-$(CONFIG_SND_TRIDENT) += snd-trident-synth.o endif - -include $(TOPDIR)/Rules.make
sound/pci/ymfpci/Makefile +0 -2
@@ -7,5 +7,3 @@ # Toplevel Module Dependency obj-$(CONFIG_SND_YMFPCI) += snd-ymfpci.o - -include $(TOPDIR)/Rules.make
sound/ppc/Makefile +0 -2
@@ -7,5 +7,3 @@ # Toplevel Module Dependency obj-$(CONFIG_SND_POWERMAC) += snd-powermac.o - -include $(TOPDIR)/Rules.make
sound/sparc/Makefile +0 -2
@@ -10,5 +10,3 @@ obj-$(CONFIG_SND_SUN_AMD7930) += snd-sun-amd7930.o #obj-$(CONFIG_SND_SUN_DBRI) += snd-sun-dbri.o obj-$(CONFIG_SND_SUN_CS4231) += snd-sun-cs4231.o - -include $(TOPDIR)/Rules.make
sound/synth/Makefile +0 -2
@@ -15,5 +15,3 @@ endif obj-$(CONFIG_SND) += emux/ - -include $(TOPDIR)/Rules.make
sound/synth/emux/Makefile +0 -2
@@ -16,5 +16,3 @@ obj-$(CONFIG_SND_SBAWE) += snd-emux-synth.o obj-$(CONFIG_SND_EMU10K1) += snd-emux-synth.o endif - -include $(TOPDIR)/Rules.make
sound/usb/Makefile +0 -2
@@ -6,5 +6,3 @@ # Toplevel Module Dependency obj-$(CONFIG_SND_USB_AUDIO) += snd-usb-audio.o - -include $(TOPDIR)/Rules.make