Skip to contentSkip to conversation

kernel craps out accessing Sony CDRW with ide-scsi

DISCUSSION Howard Shane 4 participants 7 messages Jan 29, 2003 – Feb 1, 2003

lore
Share & tools
lore
#0 lore raw

Hi,

I am having problems using kernel 2.4.20 with built-in scsi-emulation and a newly installed Sony CDRW drive. I've seen posts on ide-scsi on the list in the past, but nothing this specific, so I am forwarding this info to the list for anyone interested. The kernel recognizes the drive fine and 'cdrecord -scanbus' yields the following info:

scsibus0:

       0,0,0     0) 'SONY    ' 'CD-RW  CRX185E1 ' 'XYS2' Removable CD-ROM
       0,1,0     1) 'TOSHIBA ' 'DVD-ROM SD-R1002' '1034' Removable CD-ROM
       0,2,0     2) *

...etc. This kernel has worked fine with the toshiba CDRW drive, but since installing and using the Sony on four separate occasions I have had lockups requiring a hard reset, once when ripping an audio CD, once when using gnome2's cdplayer and the other two using 'eject /dev/sr0' at the command line. At other times it works just fine. This or something similar is found in the kernel log of the events:

=================================================================

Jan 27 12:32:13 iii kernel: scsi : aborting command due to timeout : pid 202550, scsi0, channel 0, id 0, lun 0 0x25 00 00 00 00 00 00 00 00 00
Jan 27 12:32:13 iii kernel: hdc: irq timeout: status=0xd0 { Busy }
Jan 27 12:32:13 iii kernel: hdc: DMA disabled
Jan 27 12:32:13 iii kernel: hdc: ATAPI reset complete
Jan 27 12:32:13 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:32:13 iii kernel: hdc: ATAPI reset complete
Jan 27 12:32:15 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:32:15 iii kernel: scsi0 channel 0 : resetting for second half of retries.
Jan 27 12:32:15 iii kernel: SCSI bus is being reset for host 0 channel 0.
Jan 27 12:32:15 iii kernel: hdc: status timeout: status=0xc0 { Busy }
Jan 27 12:32:15 iii kernel: hdc: drive not ready for command
Jan 27 12:32:15 iii kernel: hdc: ATAPI reset complete
Jan 27 12:32:45 iii kernel: scsi : aborting command due to timeout : pid 202551, scsi0, channel 0, id 0, lun 0 0x25 00 00 00 00 00 00 00 00 00
Jan 27 12:32:45 iii kernel: SCSI host 0 abort (pid 202551) timed out - resetting
Jan 27 12:32:45 iii kernel: SCSI bus is being reset for host 0 channel 0.
Jan 27 12:32:45 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:32:45 iii kernel: hdc: ATAPI reset complete
Jan 27 12:32:47 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:32:47 iii kernel: hdc: status timeout: status=0xc0 { Busy }
Jan 27 12:32:47 iii kernel: hdc: drive not ready for command

==============this repeats until the following pid==========

Jan 27 12:53:01 iii kernel: scsi : aborting command due to timeout : pid 202654, scsi0, channel 0, id 0, lun 0 0x1e 00 00 00 01 00
Jan 27 12:53:01 iii kernel: SCSI host 0 abort (pid 202654) timed out - resetting
Jan 27 12:53:01 iii kernel: SCSI bus is being reset for host 0 channel 0.
Jan 27 12:53:02 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:53:02 iii kernel: hdc: ATAPI reset complete
Jan 27 12:53:03 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:53:03 iii kernel: hdc: status timeout: status=0xc0 { Busy }
Jan 27 12:53:03 iii kernel: hdc: drive not ready for command
Jan 27 12:53:04 iii kernel: hdc: ATAPI reset complete
Jan 27 12:53:10 iii kernel: Unable to handle kernel paging request at virtual address 0c758b10
Jan 27 12:53:10 iii kernel:  printing eip:
Jan 27 12:53:10 iii kernel: c014beb4
Jan 27 12:53:10 iii kernel: *pde = 00000000
Jan 27 12:53:10 iii kernel: Oops: 0000
Jan 27 12:53:10 iii kernel: CPU:    0
Jan 27 12:53:10 iii kernel: EIP:    0010:[proc_check_root+132/272] Tainted: P
Jan 27 12:53:10 iii kernel: EFLAGS: 00210207
Jan 27 12:53:10 iii kernel: eax: 0c758b08   ebx: c158d3c0   ecx: d9940000   edx: 0c758b08
Jan 27 12:53:10 iii kernel: esi: c1588b40   edi: d9940000   ebp: c158d3c0   esp: c6465efc
Jan 27 12:53:10 iii kernel: ds: 0018   es: 0018   ss: 0018
Jan 27 12:53:10 iii kernel: Process ps (pid: 17219, stackpage=c6465000)
Jan 27 12:53:10 iii kernel: Stack: cbb102c0 ffffffec c6465fa4 cbb102c0 00000000 c15eac00 0c758b08 c014bf5d
Jan 27 12:53:10 iii kernel:        cbb102c0 c7599f40 c013989f cbb102c0 00000001 c013a388 cbb102c0 00000001
Jan 27 12:53:10 iii kernel:        c6465fa4 caf3b000 00000000 00000008 bffff710 00000008 caf3b00f c7599f40
Jan 27 12:53:10 iii kernel: Call Trace:    [proc_permission+29/48] [permission+31/48] [link_path_walk+2104/2144] [path_walk+26/32] [path_lookup+27/48]
Jan 27 12:53:10 iii kernel:   [__user_walk+38/64] [sys_readlink+48/160] [sys_close+67/96] [system_call+51/56]
Jan 27 12:53:10 iii kernel:
Jan 27 12:53:10 iii kernel: Code: 8b 50 08 39 d0 74 65 8b 40 0c 89 54 24 18 39 da 75 ea 56 50
Jan 27 12:53:13 iii kernel:  scsi : aborting command due to timeout : pid 202655, scsi0, channel 0, id 0, lun 0 0x1e 00 00 00 01 00
Jan 27 12:53:13 iii kernel: SCSI host 0 abort (pid 202655) timed out - resetting
Jan 27 12:53:13 iii kernel: SCSI bus is being reset for host 0 channel 0.
Jan 27 12:53:14 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:53:14 iii kernel: hdc: ATAPI reset complete
Jan 27 12:53:14 iii kernel: hdc: ATAPI reset complete
Jan 27 12:53:15 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:53:15 iii kernel: hdc: status timeout: status=0xc0 { Busy }
Jan 27 12:53:15 iii kernel: hdc: drive not ready for command
Jan 27 12:53:16 iii kernel: hdc: ATAPI reset complete
Jan 27 12:53:19 iii kernel: Unable to handle kernel paging request at virtual address 0c758b10
Jan 27 12:53:19 iii kernel:  printing eip:
Jan 27 12:53:19 iii kernel: c014beb4
Jan 27 12:53:19 iii kernel: *pde = 00000000
Jan 27 12:53:19 iii kernel: Oops: 0000
Jan 27 12:53:19 iii kernel: CPU:    0
Jan 27 12:53:19 iii kernel: EIP:    0010:[proc_check_root+132/272] Tainted: P
Jan 27 12:53:19 iii kernel: EFLAGS: 00210207
Jan 27 12:53:19 iii kernel: eax: 0c758b08   ebx: c158d3c0   ecx: d9940000   edx: 0c758b08
Jan 27 12:53:19 iii kernel: esi: c1588b40   edi: d9940000   ebp: c158d3c0   esp: cd86defc
Jan 27 12:53:19 iii kernel: ds: 0018   es: 0018   ss: 0018
Jan 27 12:53:19 iii kernel: Process ps (pid: 17220, stackpage=cd86d000)
Jan 27 12:53:19 iii kernel: Stack: cbb102c0 ffffffec cd86dfa4 cbb102c0 00000000 c15eac00 0c758b08 c014bf5d
Jan 27 12:53:19 iii kernel:        cbb102c0 c7599f40 c013989f cbb102c0 00000001 c013a388 cbb102c0 00000001
Jan 27 12:53:19 iii kernel:        cd86dfa4 cf186000 00000000 00000008 bffff710 00000008 cf18600f c7599f40
Jan 27 12:53:19 iii kernel: Call Trace:    [proc_permission+29/48] [permission+31/48] [link_path_walk+2104/2144] [path_walk+26/32] [path_lookup+27/48]
Jan 27 12:53:19 iii kernel:   [__user_walk+38/64] [sys_readlink+48/160] [sys_close+67/96] [system_call+51/56]
Jan 27 12:53:19 iii kernel:
Jan 27 12:53:19 iii kernel: Code: 8b 50 08 39 d0 74 65 8b 40 0c 89 54 24 18 39 da 75 ea 56 50
Jan 27 12:53:25 iii kernel:  scsi : aborting command due to timeout : pid 202656, scsi0, channel 0, id 0, lun 0 0x1e 00 00 00 01 00
Jan 27 12:53:25 iii kernel: SCSI host 0 abort (pid 202656) timed out - resetting
Jan 27 12:53:25 iii kernel: SCSI bus is being reset for host 0 channel 0.
Jan 27 12:53:26 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:53:26 iii kernel: hdc: ATAPI reset complete
Jan 27 12:53:27 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:53:27 iii kernel: hdc: status timeout: status=0xc0 { Busy }
Jan 27 12:53:27 iii kernel: hdc: drive not ready for command
Jan 27 12:53:28 iii kernel: hdc: ATAPI reset complete
Jan 27 12:53:37 iii kernel: scsi : aborting command due to timeout : pid 202657, scsi0, channel 0, id 0, lun 0 0x1e 00 00 00 01 00
Jan 27 12:53:37 iii kernel: SCSI host 0 abort (pid 202657) timed out - resetting
Jan 27 12:53:37 iii kernel: SCSI bus is being reset for host 0 channel 0.
Jan 27 12:53:38 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:53:38 iii kernel: hdc: ATAPI reset complete
Jan 27 12:53:38 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:53:39 iii kernel: hdc: status timeout: status=0xc0 { Busy }
Jan 27 12:53:39 iii kernel: hdc: drive not ready for command
Jan 27 12:53:40 iii kernel: hdc: ATAPI reset complete
Jan 27 12:53:46 iii kernel: Unable to handle kernel paging request at virtual address 00020001
Jan 27 12:53:46 iii kernel:  printing eip:
Jan 27 12:53:46 iii kernel: c014bcba
Jan 27 12:53:46 iii kernel: *pde = 00000000
Jan 27 12:53:46 iii kernel: Oops: 0002
Jan 27 12:53:46 iii kernel: CPU:    0
Jan 27 12:53:46 iii kernel: EIP:    0010:[proc_root_link+26/96] Tainted: P
Jan 27 12:53:46 iii kernel: EFLAGS: 00210202
Jan 27 12:53:46 iii kernel: eax: d430e000   ebx: fffffffe   ecx: 00020001   edx: d2901f10
Jan 27 12:53:46 iii kernel: esi: ffffffec   edi: d2901fa4   ebp: cbb102c0   esp: d2901ee8
Jan 27 12:53:46 iii kernel: ds: 0018   es: 0018   ss: 0018
Jan 27 12:53:46 iii kernel: Process ps (pid: 17221, stackpage=d2901000)
Jan 27 12:53:46 iii kernel: Stack: cbb102c0 c014be53 cbb102c0 d2901f10 d2901f14 cbb102c0 ffffffec d2901fa4
Jan 27 12:53:46 iii kernel:        cbb102c0 00000000 d2901fa4 c014bf50 c014bf5d cbb102c0 c7599f40 c013989f
Jan 27 12:53:46 iii kernel:        cbb102c0 00000001 c013a388 cbb102c0 00000001 d2901fa4 d50f0000 00000000
Jan 27 12:53:46 iii kernel: Call Trace:    [proc_check_root+35/272] [proc_permission+16/48] [proc_permission+29/48] [permission+31/48] [link_path_walk+2104/2144]
Jan 27 12:53:46 iii kernel:   [path_walk+26/32] [path_lookup+27/48] [__user_walk+38/64] [sys_readlink+48/160] [sys_close+67/96] [system_call+51/56]
Jan 27 12:53:46 iii kernel:
Jan 27 12:53:46 iii kernel: Code: ff 01 8b 51 14 85 d2 74 03 ff 42 28 8b 44 24 10 89 10 8b 51
Jan 27 12:53:49 iii kernel:  scsi : aborting command due to timeout : pid 202658, scsi0, channel 0, id 0, lun 0 0x1e 00 00 00 01 00
Jan 27 12:53:50 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:53:50 iii kernel: hdc: ATAPI reset complete
Jan 27 12:53:50 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:53:50 iii kernel: hdc: status timeout: status=0xc0 { Busy }
Jan 27 12:53:50 iii kernel: hdc: drive not ready for command
Jan 27 12:53:50 iii kernel: hdc: ATAPI reset complete
Jan 27 12:53:56 iii kernel: Unable to handle kernel paging request at virtual address 00020001
Jan 27 12:53:56 iii kernel:  printing eip:
Jan 27 12:53:56 iii kernel: c014bcba
Jan 27 12:53:56 iii kernel: *pde = 00000000
Jan 27 12:53:56 iii kernel: Oops: 0002
Jan 27 12:53:56 iii kernel: CPU:    0
Jan 27 12:53:56 iii kernel: EIP:    0010:[proc_root_link+26/96] Tainted: P
Jan 27 12:53:56 iii kernel: EFLAGS: 00210202
Jan 27 12:53:56 iii kernel: eax: d430e000   ebx: fffffffe   ecx: 00020001   edx: d2901f10
Jan 27 12:53:56 iii kernel: esi: ffffffec   edi: d2901fa4   ebp: cbb102c0   esp: d2901ee8
Jan 27 12:53:56 iii kernel: ds: 0018   es: 0018   ss: 0018
Jan 27 12:53:56 iii kernel: Process ps (pid: 17223, stackpage=d2901000)
Jan 27 12:53:56 iii kernel: Stack: cbb102c0 c014be53 cbb102c0 d2901f10 d2901f14 cbb102c0 ffffffec d2901fa4
Jan 27 12:53:56 iii kernel:        cbb102c0 00000000 d2901fa4 c014bf50 c014bf5d cbb102c0 c7599f40 c013989f
Jan 27 12:53:56 iii kernel:        cbb102c0 00000001 c013a388 cbb102c0 00000001 d2901fa4 d7969000 00000000
Jan 27 12:53:56 iii kernel: Call Trace:    [proc_check_root+35/272] [proc_permission+16/48] [proc_permission+29/48] [permission+31/48] [link_path_walk+2104/2144]
Jan 27 12:53:56 iii kernel:   [path_walk+26/32] [path_lookup+27/48] [__user_walk+38/64] [sys_readlink+48/160] [sys_close+67/96] [system_call+51/56]
Jan 27 12:53:56 iii kernel:
Jan 27 12:53:56 iii kernel: Code: ff 01 8b 51 14 85 d2 74 03 ff 42 28 8b 44 24 10 89 10 8b 51
Jan 27 12:54:00 iii kernel:  scsi : aborting command due to timeout : pid 202659, scsi0, channel 0, id 0, lun 0 0x1e 00 00 00 01 00
Jan 27 12:54:00 iii kernel: SCSI host 0 abort (pid 202659) timed out - resetting
Jan 27 12:54:00 iii kernel: SCSI bus is being reset for host 0 channel 0.
Jan 27 12:54:00 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:54:00 iii kernel: hdc: ATAPI reset complete
Jan 27 12:54:02 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:54:02 iii kernel: hdc: status timeout: status=0xc0 { Busy }
Jan 27 12:54:02 iii kernel: hdc: drive not ready for command
Jan 27 12:54:02 iii kernel: hdc: ATAPI reset complete
Jan 27 12:54:12 iii kernel: scsi : aborting command due to timeout : pid 202660, scsi0, channel 0, id 0, lun 0 0x1e 00 00 00 01 00
Jan 27 12:54:12 iii kernel: SCSI host 0 abort (pid 202660) timed out - resetting

======================================================================

At which point everything freezes, the keyboard LEDs flash and no combination of three fingered salutes revives the system.

THis is my first post to the list so I apologize if any of this is superfluous.

#1 lore raw

Search recent history, Sony CDRW's are known problems.

Andre Hedrick
LAD Storage Consulting Group

Quoted 252 lines · Howard Shane

Hi,

I am having problems using kernel 2.4.20 with built-in scsi-emulation and a newly installed Sony CDRW drive. I've seen posts on ide-scsi on the list in the past, but nothing this specific, so I am forwarding this info to the list for anyone interested. The kernel recognizes the drive fine and 'cdrecord -scanbus' yields the following info:

scsibus0:

        0,0,0     0) 'SONY    ' 'CD-RW  CRX185E1 ' 'XYS2' Removable CD-ROM
        0,1,0     1) 'TOSHIBA ' 'DVD-ROM SD-R1002' '1034' Removable CD-ROM
        0,2,0     2) *

...etc. This kernel has worked fine with the toshiba CDRW drive, but since installing and using the Sony on four separate occasions I have had lockups requiring a hard reset, once when ripping an audio CD, once when using gnome2's cdplayer and the other two using 'eject /dev/sr0' at the command line. At other times it works just fine. This or something similar is found in the kernel log of the events:

=================================================================

Jan 27 12:32:13 iii kernel: scsi : aborting command due to timeout : pid 
202550, scsi0, channel 0, id 0, lun 0 0x25 00 00 00 00 00 00 00 00 00
Jan 27 12:32:13 iii kernel: hdc: irq timeout: status=0xd0 { Busy }
Jan 27 12:32:13 iii kernel: hdc: DMA disabled
Jan 27 12:32:13 iii kernel: hdc: ATAPI reset complete
Jan 27 12:32:13 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:32:13 iii kernel: hdc: ATAPI reset complete
Jan 27 12:32:15 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:32:15 iii kernel: scsi0 channel 0 : resetting for second half 
of retries.
Jan 27 12:32:15 iii kernel: SCSI bus is being reset for host 0 channel 0.
Jan 27 12:32:15 iii kernel: hdc: status timeout: status=0xc0 { Busy }
Jan 27 12:32:15 iii kernel: hdc: drive not ready for command
Jan 27 12:32:15 iii kernel: hdc: ATAPI reset complete
Jan 27 12:32:45 iii kernel: scsi : aborting command due to timeout : pid 
202551, scsi0, channel 0, id 0, lun 0 0x25 00 00 00 00 00 00 00 00 00
Jan 27 12:32:45 iii kernel: SCSI host 0 abort (pid 202551) timed out - 
resetting
Jan 27 12:32:45 iii kernel: SCSI bus is being reset for host 0 channel 0.
Jan 27 12:32:45 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:32:45 iii kernel: hdc: ATAPI reset complete
Jan 27 12:32:47 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:32:47 iii kernel: hdc: status timeout: status=0xc0 { Busy }
Jan 27 12:32:47 iii kernel: hdc: drive not ready for command

==============this repeats until the following pid==========

Jan 27 12:53:01 iii kernel: scsi : aborting command due to timeout : pid 
202654, scsi0, channel 0, id 0, lun 0 0x1e 00 00 00 01 00
Jan 27 12:53:01 iii kernel: SCSI host 0 abort (pid 202654) timed out - 
resetting
Jan 27 12:53:01 iii kernel: SCSI bus is being reset for host 0 channel 0.
Jan 27 12:53:02 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:53:02 iii kernel: hdc: ATAPI reset complete
Jan 27 12:53:03 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:53:03 iii kernel: hdc: status timeout: status=0xc0 { Busy }
Jan 27 12:53:03 iii kernel: hdc: drive not ready for command
Jan 27 12:53:04 iii kernel: hdc: ATAPI reset complete
Jan 27 12:53:10 iii kernel: Unable to handle kernel paging request at 
virtual address 0c758b10
Jan 27 12:53:10 iii kernel:  printing eip:
Jan 27 12:53:10 iii kernel: c014beb4
Jan 27 12:53:10 iii kernel: *pde = 00000000
Jan 27 12:53:10 iii kernel: Oops: 0000
Jan 27 12:53:10 iii kernel: CPU:    0
Jan 27 12:53:10 iii kernel: EIP:    0010:[proc_check_root+132/272] 
Tainted: P
Jan 27 12:53:10 iii kernel: EFLAGS: 00210207
Jan 27 12:53:10 iii kernel: eax: 0c758b08   ebx: c158d3c0   ecx: 
d9940000   edx: 0c758b08
Jan 27 12:53:10 iii kernel: esi: c1588b40   edi: d9940000   ebp: 
c158d3c0   esp: c6465efc
Jan 27 12:53:10 iii kernel: ds: 0018   es: 0018   ss: 0018
Jan 27 12:53:10 iii kernel: Process ps (pid: 17219, stackpage=c6465000)
Jan 27 12:53:10 iii kernel: Stack: cbb102c0 ffffffec c6465fa4 cbb102c0 
00000000 c15eac00 0c758b08 c014bf5d
Jan 27 12:53:10 iii kernel:        cbb102c0 c7599f40 c013989f cbb102c0 
00000001 c013a388 cbb102c0 00000001
Jan 27 12:53:10 iii kernel:        c6465fa4 caf3b000 00000000 00000008 
bffff710 00000008 caf3b00f c7599f40
Jan 27 12:53:10 iii kernel: Call Trace:    [proc_permission+29/48] 
[permission+31/48] [link_path_walk+2104/2144] [path_walk+26/32] 
[path_lookup+27/48]
Jan 27 12:53:10 iii kernel:   [__user_walk+38/64] [sys_readlink+48/160] 
[sys_close+67/96] [system_call+51/56]
Jan 27 12:53:10 iii kernel:
Jan 27 12:53:10 iii kernel: Code: 8b 50 08 39 d0 74 65 8b 40 0c 89 54 24 
18 39 da 75 ea 56 50
Jan 27 12:53:13 iii kernel:  scsi : aborting command due to timeout : 
pid 202655, scsi0, channel 0, id 0, lun 0 0x1e 00 00 00 01 00
Jan 27 12:53:13 iii kernel: SCSI host 0 abort (pid 202655) timed out - 
resetting
Jan 27 12:53:13 iii kernel: SCSI bus is being reset for host 0 channel 0.
Jan 27 12:53:14 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:53:14 iii kernel: hdc: ATAPI reset complete
Jan 27 12:53:14 iii kernel: hdc: ATAPI reset complete
Jan 27 12:53:15 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:53:15 iii kernel: hdc: status timeout: status=0xc0 { Busy }
Jan 27 12:53:15 iii kernel: hdc: drive not ready for command
Jan 27 12:53:16 iii kernel: hdc: ATAPI reset complete
Jan 27 12:53:19 iii kernel: Unable to handle kernel paging request at 
virtual address 0c758b10
Jan 27 12:53:19 iii kernel:  printing eip:
Jan 27 12:53:19 iii kernel: c014beb4
Jan 27 12:53:19 iii kernel: *pde = 00000000
Jan 27 12:53:19 iii kernel: Oops: 0000
Jan 27 12:53:19 iii kernel: CPU:    0
Jan 27 12:53:19 iii kernel: EIP:    0010:[proc_check_root+132/272] 
Tainted: P
Jan 27 12:53:19 iii kernel: EFLAGS: 00210207
Jan 27 12:53:19 iii kernel: eax: 0c758b08   ebx: c158d3c0   ecx: 
d9940000   edx: 0c758b08
Jan 27 12:53:19 iii kernel: esi: c1588b40   edi: d9940000   ebp: 
c158d3c0   esp: cd86defc
Jan 27 12:53:19 iii kernel: ds: 0018   es: 0018   ss: 0018
Jan 27 12:53:19 iii kernel: Process ps (pid: 17220, stackpage=cd86d000)
Jan 27 12:53:19 iii kernel: Stack: cbb102c0 ffffffec cd86dfa4 cbb102c0 
00000000 c15eac00 0c758b08 c014bf5d
Jan 27 12:53:19 iii kernel:        cbb102c0 c7599f40 c013989f cbb102c0 
00000001 c013a388 cbb102c0 00000001
Jan 27 12:53:19 iii kernel:        cd86dfa4 cf186000 00000000 00000008 
bffff710 00000008 cf18600f c7599f40
Jan 27 12:53:19 iii kernel: Call Trace:    [proc_permission+29/48] 
[permission+31/48] [link_path_walk+2104/2144] [path_walk+26/32] 
[path_lookup+27/48]
Jan 27 12:53:19 iii kernel:   [__user_walk+38/64] [sys_readlink+48/160] 
[sys_close+67/96] [system_call+51/56]
Jan 27 12:53:19 iii kernel:
Jan 27 12:53:19 iii kernel: Code: 8b 50 08 39 d0 74 65 8b 40 0c 89 54 24 
18 39 da 75 ea 56 50
Jan 27 12:53:25 iii kernel:  scsi : aborting command due to timeout : 
pid 202656, scsi0, channel 0, id 0, lun 0 0x1e 00 00 00 01 00
Jan 27 12:53:25 iii kernel: SCSI host 0 abort (pid 202656) timed out - 
resetting
Jan 27 12:53:25 iii kernel: SCSI bus is being reset for host 0 channel 0.
Jan 27 12:53:26 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:53:26 iii kernel: hdc: ATAPI reset complete
Jan 27 12:53:27 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:53:27 iii kernel: hdc: status timeout: status=0xc0 { Busy }
Jan 27 12:53:27 iii kernel: hdc: drive not ready for command
Jan 27 12:53:28 iii kernel: hdc: ATAPI reset complete
Jan 27 12:53:37 iii kernel: scsi : aborting command due to timeout : pid 
202657, scsi0, channel 0, id 0, lun 0 0x1e 00 00 00 01 00
Jan 27 12:53:37 iii kernel: SCSI host 0 abort (pid 202657) timed out - 
resetting
Jan 27 12:53:37 iii kernel: SCSI bus is being reset for host 0 channel 0.
Jan 27 12:53:38 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:53:38 iii kernel: hdc: ATAPI reset complete
Jan 27 12:53:38 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:53:39 iii kernel: hdc: status timeout: status=0xc0 { Busy }
Jan 27 12:53:39 iii kernel: hdc: drive not ready for command
Jan 27 12:53:40 iii kernel: hdc: ATAPI reset complete
Jan 27 12:53:46 iii kernel: Unable to handle kernel paging request at 
virtual address 00020001
Jan 27 12:53:46 iii kernel:  printing eip:
Jan 27 12:53:46 iii kernel: c014bcba
Jan 27 12:53:46 iii kernel: *pde = 00000000
Jan 27 12:53:46 iii kernel: Oops: 0002
Jan 27 12:53:46 iii kernel: CPU:    0
Jan 27 12:53:46 iii kernel: EIP:    0010:[proc_root_link+26/96] Tainted: P
Jan 27 12:53:46 iii kernel: EFLAGS: 00210202
Jan 27 12:53:46 iii kernel: eax: d430e000   ebx: fffffffe   ecx: 
00020001   edx: d2901f10
Jan 27 12:53:46 iii kernel: esi: ffffffec   edi: d2901fa4   ebp: 
cbb102c0   esp: d2901ee8
Jan 27 12:53:46 iii kernel: ds: 0018   es: 0018   ss: 0018
Jan 27 12:53:46 iii kernel: Process ps (pid: 17221, stackpage=d2901000)
Jan 27 12:53:46 iii kernel: Stack: cbb102c0 c014be53 cbb102c0 d2901f10 
d2901f14 cbb102c0 ffffffec d2901fa4
Jan 27 12:53:46 iii kernel:        cbb102c0 00000000 d2901fa4 c014bf50 
c014bf5d cbb102c0 c7599f40 c013989f
Jan 27 12:53:46 iii kernel:        cbb102c0 00000001 c013a388 cbb102c0 
00000001 d2901fa4 d50f0000 00000000
Jan 27 12:53:46 iii kernel: Call Trace:    [proc_check_root+35/272] 
[proc_permission+16/48] [proc_permission+29/48] [permission+31/48] 
[link_path_walk+2104/2144]
Jan 27 12:53:46 iii kernel:   [path_walk+26/32] [path_lookup+27/48] 
[__user_walk+38/64] [sys_readlink+48/160] [sys_close+67/96] 
[system_call+51/56]
Jan 27 12:53:46 iii kernel:
Jan 27 12:53:46 iii kernel: Code: ff 01 8b 51 14 85 d2 74 03 ff 42 28 8b 
44 24 10 89 10 8b 51
Jan 27 12:53:49 iii kernel:  scsi : aborting command due to timeout : 
pid 202658, scsi0, channel 0, id 0, lun 0 0x1e 00 00 00 01 00
Jan 27 12:53:50 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:53:50 iii kernel: hdc: ATAPI reset complete
Jan 27 12:53:50 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:53:50 iii kernel: hdc: status timeout: status=0xc0 { Busy }
Jan 27 12:53:50 iii kernel: hdc: drive not ready for command
Jan 27 12:53:50 iii kernel: hdc: ATAPI reset complete
Jan 27 12:53:56 iii kernel: Unable to handle kernel paging request at 
virtual address 00020001
Jan 27 12:53:56 iii kernel:  printing eip:
Jan 27 12:53:56 iii kernel: c014bcba
Jan 27 12:53:56 iii kernel: *pde = 00000000
Jan 27 12:53:56 iii kernel: Oops: 0002
Jan 27 12:53:56 iii kernel: CPU:    0
Jan 27 12:53:56 iii kernel: EIP:    0010:[proc_root_link+26/96] Tainted: P
Jan 27 12:53:56 iii kernel: EFLAGS: 00210202
Jan 27 12:53:56 iii kernel: eax: d430e000   ebx: fffffffe   ecx: 
00020001   edx: d2901f10
Jan 27 12:53:56 iii kernel: esi: ffffffec   edi: d2901fa4   ebp: 
cbb102c0   esp: d2901ee8
Jan 27 12:53:56 iii kernel: ds: 0018   es: 0018   ss: 0018
Jan 27 12:53:56 iii kernel: Process ps (pid: 17223, stackpage=d2901000)
Jan 27 12:53:56 iii kernel: Stack: cbb102c0 c014be53 cbb102c0 d2901f10 
d2901f14 cbb102c0 ffffffec d2901fa4
Jan 27 12:53:56 iii kernel:        cbb102c0 00000000 d2901fa4 c014bf50 
c014bf5d cbb102c0 c7599f40 c013989f
Jan 27 12:53:56 iii kernel:        cbb102c0 00000001 c013a388 cbb102c0 
00000001 d2901fa4 d7969000 00000000
Jan 27 12:53:56 iii kernel: Call Trace:    [proc_check_root+35/272] 
[proc_permission+16/48] [proc_permission+29/48] [permission+31/48] 
[link_path_walk+2104/2144]
Jan 27 12:53:56 iii kernel:   [path_walk+26/32] [path_lookup+27/48] 
[__user_walk+38/64] [sys_readlink+48/160] [sys_close+67/96] 
[system_call+51/56]
Jan 27 12:53:56 iii kernel:
Jan 27 12:53:56 iii kernel: Code: ff 01 8b 51 14 85 d2 74 03 ff 42 28 8b 
44 24 10 89 10 8b 51
Jan 27 12:54:00 iii kernel:  scsi : aborting command due to timeout : 
pid 202659, scsi0, channel 0, id 0, lun 0 0x1e 00 00 00 01 00
Jan 27 12:54:00 iii kernel: SCSI host 0 abort (pid 202659) timed out - 
resetting
Jan 27 12:54:00 iii kernel: SCSI bus is being reset for host 0 channel 0.
Jan 27 12:54:00 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:54:00 iii kernel: hdc: ATAPI reset complete
Jan 27 12:54:02 iii kernel: hdc: irq timeout: status=0xc0 { Busy }
Jan 27 12:54:02 iii kernel: hdc: status timeout: status=0xc0 { Busy }
Jan 27 12:54:02 iii kernel: hdc: drive not ready for command
Jan 27 12:54:02 iii kernel: hdc: ATAPI reset complete
Jan 27 12:54:12 iii kernel: scsi : aborting command due to timeout : pid 
202660, scsi0, channel 0, id 0, lun 0 0x1e 00 00 00 01 00
Jan 27 12:54:12 iii kernel: SCSI host 0 abort (pid 202660) timed out - 

resetting

======================================================================

At which point everything freezes, the keyboard LEDs flash and no combination of three fingered salutes revives the system.

THis is my first post to the list so I apologize if any of this is superfluous.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#2 lore raw
Quoted 1 line · Andre Hedrick

Search recent history, Sony CDRW's are known problems.

Still shouldnt oops later on when it resets

#3 lore raw

FYI I am running 2.4.20, and the CDRW in question is the master on the bus it is attached to. I'll be happy to send more logs of the event or any other info you request. Thanks

Quoted 13 lines · Alan Cox
Quoted 3 lines · Andre Hedrick

Search recent history, Sony CDRW's are known problems.

Still shouldnt oops later on when it resets

#4 lore raw
Quoted 3 lines · Howard Shane

FYI I am running 2.4.20, and the CDRW in question is the master on the bus it is attached to. I'll be happy to send more logs of the event or any other info you request. Thanks

Im mostly interested to know if the newer IDE code now merged into 2.4.21pre also shows the same problem for you.

#5 lore raw

After heavy testing of the drive with a 2.4.21-pre kernel I have yet to be able to reproduce the problem. :^)

Quoted 13 lines · Alan Cox
Quoted 3 lines · Howard Shane

FYI I am running 2.4.20, and the CDRW in question is the master on the bus it is attached to. I'll be happy to send more logs of the event or any other info you request. Thanks

Im mostly interested to know if the newer IDE code now merged into 2.4.21pre also shows the same problem for you.

#6 lore raw
In reply to Howard Shane
Quoted 4 lines · Howard Shane

FYI I am running 2.4.20, and the CDRW in question is the master on the bus it is attached to. I'll be happy to send more logs of the event or any other info you request. Thanks

Look at yesterday's mail. Somebody posted a fix. It was a definite "doing something out-of-order" fix.

Cheers,
Dick Johnson
Penguin : Linux version 2.4.18 on an i686 machine (797.90 BogoMips). Why is the government concerned about the lunatic fringe? Think about it.