Skip to contentSkip to conversation

Cerberus

DISCUSSION Paul Larson 2 participants 2 messages Feb 5, 2003

lore
Share & tools
lore
#0 lore raw

I saw a comment late last week that someone was seeing cerberus crash instantaneously with 2.5 on UP machines, so I decided to try to reproduce this problem. I got the latest version of ceerbuerus and put it on a single processor pIII-866 256MB ram, linux-2.5.59 kernel. Newburn has been running for just under 5 days now without so much as a hiccup.

1. Has anyone had first hand experience with this instability?

2. If so, were you just running the default newburn, or something else? Please let me know if you did something different that caused it to crash.

Thanks,
Paul Larson

#1 lore raw
Quoted 6 lines · Paul Larson

I saw a comment late last week that someone was seeing cerberus crash
instantaneously with 2.5 on UP machines, so I decided to try to
reproduce this problem. I got the latest version of ceerbuerus and put
it on a single processor pIII-866 256MB ram, linux-2.5.59 kernel. Newburn has been running for just under 5 days now without so much as a hiccup.

Quoted 6 lines

1. Has anyone had first hand experience with this instability?

2. If so, were you just running the default newburn, or something else? Please let me know if you did something different that caused it to crash.

I've run Cerberus on a number of smp 2.5 kernels without issue. You
might try "./newburn -t -p 2". Remember that you can fine tune your test by editing the newburn.tcf file.

Signature · 4 lines
There is no such thing as obsolete hardware.
Merely hardware that other people don't want.
(The Second Rule of Hardware Acquisition)
Sam Flory  <[email protected]>