IP_TABLES Q
Hi All,
Please look at this and explain where I make the mistake that none
of the workstations Masq'd are able to establish a FTP session. Telnet, email, and web browsing work just fine.
TIA - Andrew Cramer
<ip_tables commands>
#!/bin/sh
#
# rc.firewall-2.4 FWVER=0.70 # # Thanks to David Ranch's IPMasq HowTo # Initial SIMPLE IP Masquerade test for 2.4.x kernels # using IPTABLES. #
echo -e "\n\nLoading simple rc.firewall version $FWVER..\n"
IPTABLES=/usr/sbin/iptables
DEPMOD=/sbin/depmod
INSMOD=/sbin/insmod
EXTIP="xxx.yyy.zzz.1" # your external IP here.
EXTIF="ppp0"
INTIF="eth0"
echo " External Interface: $EXTIF" echo " Internal Interface: $INTIF"
echo -en " loading modules: "
echo " - Verifying that all kernel modules are ok" $DEPMOD -a
echo "---------------------------------------------------------------- ------"
echo -en "ip_tables, "
$INSMOD ip_tables
echo -en "ip_conntrack, "
$INSMOD ip_conntrack
echo -en "iptable_nat, "
$INSMOD iptable_nat
echo "---------------------------------------------------------------- ------"
echo ". Done loading modules."
echo " enabling forwarding.."
echo "1" > /proc/sys/net/ipv4/ip_forward
echo " clearing any existing rules and setting default policy.."
$IPTABLES -P INPUT ACCEPT
$IPTABLES -F INPUT
$IPTABLES -P OUTPUT ACCEPT
$IPTABLES -F OUTPUT
$IPTABLES -P FORWARD ACCEPT
$IPTABLES -F FORWARD
$IPTABLES -t nat -F
$IPTABLES -A INPUT -p TCP -s 0/0 --destination-port 25 -j ACCEPT $IPTABLES -A INPUT -p TCP -s 0/0 --destination-port 110 -j ACCEPT
# Reject telnet sessions from outside (Shouldn't it be 23 ?!?)
$IPTABLES -A INPUT -p TCP -i $EXTIF --destination-port 21 -j REJECT
# Forward HTTPS requests (change the port number to suit yourself) $IPTABLES -A FORWARD -i $EXTIF -o $INTIF -p tcp --dport 443 -m state \
--state NEW,ESTABLISHED,RELATED -j ACCEPT
$IPTABLES -A PREROUTING -t nat -p tcp -d $EXTIP --dport 443 \
-j DNAT --to 192.168.1.1:443
$IPTABLES -t nat -A PREROUTING -d $EXTIP -p tcp --dport 443 \
-m state --state NEW,ESTABLISHED,RELATED -j DNAT --to 192.168.1.1echo " FWD: Allow all connections OUT and only existing and related
ones IN"
$IPTABLES -A FORWARD -i $EXTIF -o $INTIF -m state --state ESTABLISHED,RELATED -j ACCEPT
$IPTABLES -A FORWARD -i $INTIF -o $EXTIF -j ACCEPT $IPTABLES -A FORWARD -j LOG
echo " Enabling SNAT (MASQUERADE) functionality on $EXTIF"
$IPTABLES -t nat -A POSTROUTING -o $EXTIF -j MASQUERADE
echo -e "\nrc.firewall-2.4 v$FWVER done.\n"
<ip_tables Listing>
root@home:/etc/rc.d# iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT tcp -- anywhere anywhere tcp dpt:smtp ACCEPT tcp -- anywhere anywhere tcp dpt:pop3 REJECT tcp -- anywhere anywhere tcp dpt:ftp reject-with icmp-port-unreachable
Chain FORWARD (policy ACCEPT)
target prot opt source destination ACCEPT tcp -- anywhere anywhere tcp dpt:https state NEW,RELATED,ESTABLISHED ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT all -- anywhere anywhere LOG all -- anywhere anywhere LOG level
warning
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi Arend,
Thanks for responding. I was right in the change from 21 to 23, but
that had no effect for FTP. In the past, I used Linux-2.2.x with IP_CHAINS. With that I had used the ip_masq_ftp module. That worked. I guess what I'm looking for is what use for FTP rules and where to put them. The symptom is the client, Win2K with WS_FTP. The WS_FTP responds, "425 Can't build data connection: No route to host." line 2, "! Retrieve of folder listing failed(0)". Again this used to work with ipfwadm and then ipchains. It looks like it is not being handled.
Thanks - Andrew
Quoted 140 lines · Dr. Arend Wellmann
Hi!
your script closed port 21 (ftp) where you meant to close telnet (23 is indeed the right port).
However, I'd recommend you'll use a edicated proxy-server for http and ftp because your firewall-script allows any connetion from anywhere to your network.
Hope it helps,
Arend Wellmann-----Ursprüngliche Nachricht-----
Von: [email protected] [mailto:[email protected]] Im Auftrag von Andrew B. Cramer
Gesendet: Montag, 17. Februar 2003 14:08
An: linux-admin
Betreff:IP_TABLESQHi All,
Please look at this and explain where I make the mistake that
none
of the workstations Masq'd are able to establish a FTP session. Telnet, email, and web browsing work just fine.TIA - Andrew Cramer
<
ip_tablescommands>#!/bin/sh
## rc.firewall-2.4 FWVER=0.70 # # Thanks to David Ranch's IPMasq HowTo # Initial SIMPLE IP Masquerade test for 2.4.x kernels # using IPTABLES. #echo -e "\n\nLoading simple rc.firewall version $FWVER..\n"
IPTABLES=/usr/sbin/iptables
DEPMOD=/sbin/depmod
INSMOD=/sbin/insmodEXTIP="xxx.yyy.zzz.1" # your external IP here.
EXTIF="ppp0"
INTIF="eth0"echo " External Interface: $EXTIF" echo " Internal Interface: $INTIF"echo -en " loading modules: "
echo " - Verifying that all kernel modules are ok" $DEPMOD -aecho "---------------------------------------------------------------- ------"
echo -en "ip_tables, "$INSMOD
ip_tablesecho -en "
ip_conntrack, "
$INSMODip_conntrackecho -en "
iptable_nat, "
$INSMODiptable_natecho "---------------------------------------------------------------- ------"
echo ". Done loading modules."
echo " enabling forwarding.."
echo "1" >/proc/sys/net/ipv4/ip_forwardecho " clearing any existing rules and setting default policy.."
$IPTABLES -P INPUT ACCEPT
$IPTABLES -F INPUT
$IPTABLES -P OUTPUT ACCEPT
$IPTABLES -F OUTPUT
$IPTABLES -P FORWARD ACCEPT
$IPTABLES -F FORWARD
$IPTABLES -t nat -F$IPTABLES -A INPUT -p TCP -s 0/0 --destination-port 25 -j ACCEPT $IPTABLES -A INPUT -p TCP -s 0/0 --destination-port 110 -j ACCEPT
# Reject telnet sessions from outside (Shouldn't it be 23 ?!?)
$IPTABLES -A INPUT -p TCP -i $EXTIF --destination-port 21 -j REJECT# Forward HTTPS requests (change the port number to suit yourself) $IPTABLES -A FORWARD -i $EXTIF -o $INTIF -p tcp --dport 443 -m state \
--state NEW,ESTABLISHED,RELATED -j ACCEPT$IPTABLES -A PREROUTING -t nat -p tcp -d $EXTIP --dport 443 \ -j DNAT --to 192.168.1.1:443$IPTABLES -t nat -A PREROUTING -d $EXTIP -p tcp --dport 443 \ -m state --state NEW,ESTABLISHED,RELATED -j DNAT --to 192.168.1.1echo " FWD: Allow all connections OUT and only existing and related
ones IN"
$IPTABLES -A FORWARD -i $EXTIF -o $INTIF -m state --state ESTABLISHED,RELATED -j ACCEPT
$IPTABLES -A FORWARD -i $INTIF -o $EXTIF -j ACCEPT $IPTABLES -A FORWARD -j LOGecho " Enabling SNAT (MASQUERADE) functionality on $EXTIF"
$IPTABLES -t nat -A POSTROUTING -o $EXTIF -j MASQUERADEecho -e "\nrc.firewall-2.4 v$FWVER done.\n"
<
ip_tablesListing>root@home:/etc/rc.d# iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT tcp -- anywhere anywhere tcp dpt:smtp ACCEPT tcp -- anywhere anywhere tcp dpt:pop3 REJECT tcp -- anywhere anywhere tcp dpt:ftp reject-with icmp-port-unreachableChain FORWARD (policy ACCEPT)
target prot opt source destination ACCEPT tcp -- anywhere anywhere tcp dpt:https state NEW,RELATED,ESTABLISHED ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT all -- anywhere anywhere LOG all -- anywhere anywhere LOG levelwarning
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
Quoted 6 lines
-
To unsubscribe from this list: send the line "unsubscribe linux-admin" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
-
To unsubscribe from this list: send the line "unsubscribe linux-admin" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): 1045526303.18928.3.camel@linux
Hi Bart,
In the interim, I did add for ports 20 & 21. same thing. Even Windoz
FTP gives the same message. Here is a segment from my new script.
Thanks - Andrew
<snip>
$IPTABLES -A INPUT -p TCP -s 0/0 --destination-port 25 -j ACCEPT $IPTABLES -A INPUT -p TCP -s 0/0 --destination-port 110 -j ACCEPT
# Try this for FTP (ABC) - Did not work
$IPTABLES -A INPUT -p TCP -s 0/0 --destination-port 20 -j ACCEPT $IPTABLES -A INPUT -p TCP -s 0/0 --destination-port 21 -j ACCEPT
# Reject telnet sessions from outside (Changed from 21 to 23)(ABC)
$IPTABLES -A INPUT -p TCP -i $EXTIF --destination-port 23 -j REJECT
</snip>
Quoted 15 lines · Bart E. Hawley Sr.
Quoted 12 lines · Andrew B. Cramer
Hi Arend,
Thanks for responding. I was right in the change from 21 to 23, but
that had no effect for FTP. In the past, I used Linux-2.2.x withIP_CHAINS. With that I had used theip_masq_ftpmodule. That worked. I guess what I'm looking for is what use for FTP rules and where to put them. The symptom is the client, Win2K withWS_FTP. TheWS_FTPresponds, "425 Can't build data connection: No route to host." line 2, "! Retrieve of folder listing failed(0)". Again this used to work with ipfwadm and then ipchains. It looks like it is not being handled.
Quoted 165 lines
Quoted 1 line
From what I see in your error message you need to also open the FTP data
port - port 20 - to get the information through or try setting the client to passive mode.
Bart
Quoted 158 lines
Thanks - Andrew
Quoted 140 lines · Dr. Arend Wellmann
Hi!
your script closed port 21 (ftp) where you meant to close telnet (23 is indeed the right port).
However, I'd recommend you'll use a edicated proxy-server for http and ftp because your firewall-script allows any connetion from anywhere to your network.
Hope it helps,
Arend Wellmann-----Ursprüngliche Nachricht-----
Von: [email protected] [mailto:[email protected]] Im Auftrag von Andrew B. Cramer
Gesendet: Montag, 17. Februar 2003 14:08
An: linux-admin
Betreff:IP_TABLESQHi All,
Please look at this and explain where I make the mistake that
none
of the workstations Masq'd are able to establish a FTP session. Telnet, email, and web browsing work just fine.TIA - Andrew Cramer
<
ip_tablescommands>#!/bin/sh
## rc.firewall-2.4 FWVER=0.70 # # Thanks to David Ranch's IPMasq HowTo # Initial SIMPLE IP Masquerade test for 2.4.x kernels # using IPTABLES. #echo -e "\n\nLoading simple rc.firewall version $FWVER..\n"
IPTABLES=/usr/sbin/iptables
DEPMOD=/sbin/depmod
INSMOD=/sbin/insmodEXTIP="xxx.yyy.zzz.1" # your external IP here.
EXTIF="ppp0"
INTIF="eth0"echo " External Interface: $EXTIF" echo " Internal Interface: $INTIF"echo -en " loading modules: "
echo " - Verifying that all kernel modules are ok" $DEPMOD -aecho "---------------------------------------------------------------- ------"
echo -en "ip_tables, "$INSMOD
ip_tablesecho -en "
ip_conntrack, "
$INSMODip_conntrackecho -en "
iptable_nat, "
$INSMODiptable_natecho "---------------------------------------------------------------- ------"
echo ". Done loading modules."
echo " enabling forwarding.."
echo "1" >/proc/sys/net/ipv4/ip_forwardecho " clearing any existing rules and setting default policy.."
$IPTABLES -P INPUT ACCEPT
$IPTABLES -F INPUT
$IPTABLES -P OUTPUT ACCEPT
$IPTABLES -F OUTPUT
$IPTABLES -P FORWARD ACCEPT
$IPTABLES -F FORWARD
$IPTABLES -t nat -F$IPTABLES -A INPUT -p TCP -s 0/0 --destination-port 25 -j ACCEPT $IPTABLES -A INPUT -p TCP -s 0/0 --destination-port 110 -j ACCEPT
# Reject telnet sessions from outside (Shouldn't it be 23 ?!?)
$IPTABLES -A INPUT -p TCP -i $EXTIF --destination-port 21 -j REJECT# Forward HTTPS requests (change the port number to suit yourself) $IPTABLES -A FORWARD -i $EXTIF -o $INTIF -p tcp --dport 443 -m state \
--state NEW,ESTABLISHED,RELATED -j ACCEPT$IPTABLES -A PREROUTING -t nat -p tcp -d $EXTIP --dport 443 \ -j DNAT --to 192.168.1.1:443$IPTABLES -t nat -A PREROUTING -d $EXTIP -p tcp --dport 443 \ -m state --state NEW,ESTABLISHED,RELATED -j DNAT --to 192.168.1.1echo " FWD: Allow all connections OUT and only existing and related
ones IN"
$IPTABLES -A FORWARD -i $EXTIF -o $INTIF -m state --state ESTABLISHED,RELATED -j ACCEPT
$IPTABLES -A FORWARD -i $INTIF -o $EXTIF -j ACCEPT $IPTABLES -A FORWARD -j LOGecho " Enabling SNAT (MASQUERADE) functionality on $EXTIF"
$IPTABLES -t nat -A POSTROUTING -o $EXTIF -j MASQUERADEecho -e "\nrc.firewall-2.4 v$FWVER done.\n"
<
ip_tablesListing>root@home:/etc/rc.d# iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT tcp -- anywhere anywhere tcp dpt:smtp ACCEPT tcp -- anywhere anywhere tcp dpt:pop3 REJECT tcp -- anywhere anywhere tcp dpt:ftp reject-with icmp-port-unreachableChain FORWARD (policy ACCEPT)
target prot opt source destination ACCEPT tcp -- anywhere anywhere tcp dpt:https state NEW,RELATED,ESTABLISHED ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT all -- anywhere anywhere LOG all -- anywhere anywhere LOG levelwarning
Chain OUTPUT (policy ACCEPT)
target prot opt source destinationQuoted 6 lines
-
To unsubscribe from this list: send the line "unsubscribe linux-admin" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html-
To unsubscribe from this list: send the line "unsubscribe linux-admin" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
-
To unsubscribe from this list: send the line "unsubscribe linux-admin" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 9 lines · Andrew B. Cramer
In the interim, I did add for ports 20 & 21. same thing. Even Windoz
FTP gives the same message. Here is a segment from my new script.Thanks - Andrew
<snip>
$IPTABLES -A INPUT -p TCP -s 0/0 --destination-port 25 -j ACCEPT $IPTABLES -A INPUT -p TCP -s 0/0 --destination-port 110 -j ACCEPT
Quoted 6 lines
# Try this for FTP (ABC) - Did not work
$IPTABLES -A INPUT -p TCP -s 0/0 --destination-port 20 -j ACCEPT $IPTABLES -A INPUT -p TCP -s 0/0 --destination-port 21 -j ACCEPT# Reject telnet sessions from outside (Changed from 21 to 23)(ABC)
$IPTABLES -A INPUT -p TCP -i $EXTIF --destination-port 23 -j REJECT </snip>
I believe that you need to use the ip_conntrack_ftp module to track the ports which are used. Note: I don't know the specifics of how to use it, but I'm pretty sure that this is the right module.
The traditional mechanism for establishing the data channel is to have the client create a listening socket on a randomly-numbered port. The client sends the IP address and port number to the server, which then makes an inbound (server -> client) connection.
To allow this through the firewall, you have to either:
1. Allow all inbound TCP connections to unprivileged ports (>1024). While you could filter with "--source-port 20", this doesn't really buy you anything; hack attempts often use port 20 to get through firewalls which are [mis]configured in this way.
2. Have some code which monitors the traffic sent over the control channel, looking for the PORT commands (this is what ip_masq_ftp and ip_conntrack_ftp do), and enables inbound TCP connections on those ports.
However, if at all practical, you should forego the traditional ("active") mode of FTP in favour of passive mode. Here, all connections are outbound (client -> server).
For the standard "ftp" program, use the "passive" command (either interactively, or via ~/.netrc); GUI FTP clients typically have a "passive mode" check-box; Web browsers normally use passive mode automatically.
Nowadays, the main reason for supporting "active" FTP is if you have no choice, e.g. you are answerable to people who simply demand it.
Signature · 1 line
Glynn Clements <[email protected]>
Re: AW: IP_TABLES Q - Solved
Thanks Glynn & Bart!
I did switch to 'passive' ftp and the workstations behave correctly.
I will still try ip_conntrace_ftp when I get a chance. The bottom line, it's working.
Kinds Regards - Andrew Cramer
Quoted 59 lines · Glynn Clements
Quoted 9 lines · Andrew B. Cramer
In the interim, I did add for ports 20 & 21. same thing. Even Windoz
FTP gives the same message. Here is a segment from my new script.Thanks - Andrew
<snip>
$IPTABLES -A INPUT -p TCP -s 0/0 --destination-port 25 -j ACCEPT $IPTABLES -A INPUT -p TCP -s 0/0 --destination-port 110 -j ACCEPTQuoted 6 lines
# Try this for FTP (ABC) - Did not work
$IPTABLES -A INPUT -p TCP -s 0/0 --destination-port 20 -j ACCEPT $IPTABLES -A INPUT -p TCP -s 0/0 --destination-port 21 -j ACCEPT# Reject telnet sessions from outside (Changed from 21 to 23)(ABC)
$IPTABLES -A INPUT -p TCP -i $EXTIF --destination-port 23 -j REJECT </snip>I believe that you need to use the
ip_conntrack_ftpmodule to track the ports which are used. Note: I don't know the specifics of how to use it, but I'm pretty sure that this is the right module.The traditional mechanism for establishing the data channel is to have the client create a listening socket on a randomly-numbered port. The client sends the IP address and port number to the server, which then makes an inbound (server -> client) connection.
To allow this through the firewall, you have to either:
1. Allow all inbound TCP connections to unprivileged ports (>1024). While you could filter with "--source-port 20", this doesn't really buy you anything; hack attempts often use port 20 to get through firewalls which are [mis]configured in this way.
2. Have some code which monitors the traffic sent over the control channel, looking for the PORT commands (this is what
ip_masq_ftpandip_conntrack_ftpdo), and enables inbound TCP connections on those ports.However, if at all practical, you should forego the traditional ("active") mode of FTP in favour of passive mode. Here, all connections are outbound (client -> server).
For the standard "ftp" program, use the "passive" command (either interactively, or via ~/.netrc); GUI FTP clients typically have a "passive mode" check-box; Web browsers normally use passive mode automatically.
Nowadays, the main reason for supporting "active" FTP is if you have no choice, e.g. you are answerable to people who simply demand it.
Signature · 5 lines
Glynn Clements <[email protected]> - To unsubscribe from this list: send the line "unsubscribe linux-admin" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
A message that is not in the archive (sent off-list or not yet received): 1045530465.18928.9.camel@linux
Hi Bart,
Still no good. I'll keep trying, and accept any ideas.
- Andrew
<snip>
$IPTABLES -A INPUT -p TCP -s 0/0 --destination-port 25 -j ACCEPT $IPTABLES -A INPUT -p TCP -s 0/0 --destination-port 110 -j ACCEPT
# Try this for FTP (ABC) - Did not work
$IPTABLES -A INPUT -p TCP -s 0/0 --destination-port 20 -j ACCEPT $IPTABLES -A INPUT -p TCP -s 0/0 --destination-port 21 -j ACCEPT $IPTABLES -A INPUT -p UDP -s 0/0 --destination-port 20 -j ACCEPT $IPTABLES -A INPUT -p UDP -s 0/0 --destination-port 21 -j ACCEPT </snip>
Quoted 18 lines · Bart E. Hawley Sr.
Quoted 11 lines · Andrew B. Cramer
Hi Bart,
In the interim, I did add for ports 20 & 21. same thing. Even Windoz
FTP gives the same message. Here is a segment from my new script.Thanks - Andrew
<snip>
$IPTABLES -A INPUT -p TCP -s 0/0 --destination-port 25 -j ACCEPT $IPTABLES -A INPUT -p TCP -s 0/0 --destination-port 110 -j ACCEPTHi Andrew,
Sorry I didn't read down to the protocols so I missed that earlier. You need to set it for both protocols - TCP and UDP
The following is from IANA port assignments.
Quoted 207 lines
ftp-data 20/tcp File Transfer [Default Data] ftp-data 20/udp File Transfer [Default Data] ftp 21/tcp File Transfer [Control] ftp 21/udp File Transfer [Control]Bart
Quoted 198 lines
# Try this for FTP (ABC) - Did not work
$IPTABLES -A INPUT -p TCP -s 0/0 --destination-port 20 -j ACCEPT $IPTABLES -A INPUT -p TCP -s 0/0 --destination-port 21 -j ACCEPT# Reject telnet sessions from outside (Changed from 21 to 23)(ABC)
$IPTABLES -A INPUT -p TCP -i $EXTIF --destination-port 23 -j REJECT
</snip>Quoted 15 lines · Bart E. Hawley Sr.
Quoted 12 lines · Andrew B. Cramer
Hi Arend,
Thanks for responding. I was right in the change from 21 to 23, but
that had no effect for FTP. In the past, I used Linux-2.2.x withIP_CHAINS. With that I had used theip_masq_ftpmodule. That worked. I guess what I'm looking for is what use for FTP rules and where to put them. The symptom is the client, Win2K withWS_FTP. TheWS_FTPresponds, "425 Can't build data connection: No route to host." line 2, "! Retrieve of folder listing failed(0)". Again this used to work with ipfwadm and then ipchains. It looks like it is not being handled.Quoted 165 lines
Quoted 1 line
From what I see in your error message you need to also open the FTP data
port - port 20 - to get the information through or try setting the client to passive mode.
Bart
Quoted 158 lines
Thanks - Andrew
Quoted 140 lines · Dr. Arend Wellmann
Hi!
your script closed port 21 (ftp) where you meant to close telnet (23 is indeed the right port).
However, I'd recommend you'll use a edicated proxy-server for http and ftp because your firewall-script allows any connetion from anywhere to your network.
Hope it helps,
Arend Wellmann-----Ursprüngliche Nachricht-----
Von: [email protected] [mailto:[email protected]] Im Auftrag von Andrew B. Cramer
Gesendet: Montag, 17. Februar 2003 14:08
An: linux-admin
Betreff:IP_TABLESQHi All,
Please look at this and explain where I make the mistake that
none
of the workstations Masq'd are able to establish a FTP session. Telnet, email, and web browsing work just fine.TIA - Andrew Cramer
<
ip_tablescommands>#!/bin/sh
## rc.firewall-2.4 FWVER=0.70 # # Thanks to David Ranch's IPMasq HowTo # Initial SIMPLE IP Masquerade test for 2.4.x kernels # using IPTABLES. #echo -e "\n\nLoading simple rc.firewall version $FWVER..\n"
IPTABLES=/usr/sbin/iptables
DEPMOD=/sbin/depmod
INSMOD=/sbin/insmodEXTIP="xxx.yyy.zzz.1" # your external IP here.
EXTIF="ppp0"
INTIF="eth0"echo " External Interface: $EXTIF" echo " Internal Interface: $INTIF"echo -en " loading modules: "
echo " - Verifying that all kernel modules are ok" $DEPMOD -aecho "---------------------------------------------------------------- ------"
echo -en "ip_tables, "$INSMOD
ip_tablesecho -en "
ip_conntrack, "
$INSMODip_conntrackecho -en "
iptable_nat, "
$INSMODiptable_natecho "---------------------------------------------------------------- ------"
echo ". Done loading modules."
echo " enabling forwarding.."
echo "1" >/proc/sys/net/ipv4/ip_forwardecho " clearing any existing rules and setting default policy.."
$IPTABLES -P INPUT ACCEPT
$IPTABLES -F INPUT
$IPTABLES -P OUTPUT ACCEPT
$IPTABLES -F OUTPUT
$IPTABLES -P FORWARD ACCEPT
$IPTABLES -F FORWARD
$IPTABLES -t nat -F$IPTABLES -A INPUT -p TCP -s 0/0 --destination-port 25 -j ACCEPT $IPTABLES -A INPUT -p TCP -s 0/0 --destination-port 110 -j ACCEPT
# Reject telnet sessions from outside (Shouldn't it be 23 ?!?)
$IPTABLES -A INPUT -p TCP -i $EXTIF --destination-port 21 -j REJECT# Forward HTTPS requests (change the port number to suit yourself) $IPTABLES -A FORWARD -i $EXTIF -o $INTIF -p tcp --dport 443 -m state \
--state NEW,ESTABLISHED,RELATED -j ACCEPT$IPTABLES -A PREROUTING -t nat -p tcp -d $EXTIP --dport 443 \ -j DNAT --to 192.168.1.1:443$IPTABLES -t nat -A PREROUTING -d $EXTIP -p tcp --dport 443 \ -m state --state NEW,ESTABLISHED,RELATED -j DNAT --to 192.168.1.1echo " FWD: Allow all connections OUT and only existing and related
ones IN"
$IPTABLES -A FORWARD -i $EXTIF -o $INTIF -m state --state ESTABLISHED,RELATED -j ACCEPT
$IPTABLES -A FORWARD -i $INTIF -o $EXTIF -j ACCEPT $IPTABLES -A FORWARD -j LOGecho " Enabling SNAT (MASQUERADE) functionality on $EXTIF"
$IPTABLES -t nat -A POSTROUTING -o $EXTIF -j MASQUERADEecho -e "\nrc.firewall-2.4 v$FWVER done.\n"
<
ip_tablesListing>root@home:/etc/rc.d# iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT tcp -- anywhere anywhere tcp dpt:smtp ACCEPT tcp -- anywhere anywhere tcp dpt:pop3 REJECT tcp -- anywhere anywhere tcp dpt:ftp reject-with icmp-port-unreachableChain FORWARD (policy ACCEPT)
target prot opt source destination ACCEPT tcp -- anywhere anywhere tcp dpt:https state NEW,RELATED,ESTABLISHED ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT all -- anywhere anywhere LOG all -- anywhere anywhere LOG levelwarning
Chain OUTPUT (policy ACCEPT)
target prot opt source destinationQuoted 6 lines
-
To unsubscribe from this list: send the line "unsubscribe linux-admin" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html-
To unsubscribe from this list: send the line "unsubscribe linux-admin" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html-
To unsubscribe from this list: send the line "unsubscribe linux-admin" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
-
To unsubscribe from this list: send the line "unsubscribe linux-admin" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html