BUG? SA_INTERRUPT and shared IRQs
i'm having a problem with crashes which i think is to do with shared irq's. i have too many things hanging off my PCI bus... dammit.
on IRQ 19 i have:
wlan0 (prism2 based wireless card running hostap)
ens1371 (soundcard)
uhci-hcd (USB driver)
wlan0 and uhci-hcd call request_irq with SA_SHIRQ ens1371 calles request_irq with SA_SHIRQ | SA_INTERRUPT
the code that calls the interrupt handlers appears to be: (arch/i386/kernel/irq.c)
int handle_IRQ_event(unsigned int irq, struct pt_regs * regs, struct irqaction * action)
{
int status = 1; /* Force the "do bottom halves" bit */
if (!(action->flags & SA_INTERRUPT))
local_irq_enable();
do {
status |= action->flags;
action->handler(irq, action->dev_id, regs);
action = action->next;
} while (action);
if (status & SA_SAMPLE_RANDOM)
add_interrupt_randomness(irq);
local_irq_disable();
return status;
}which looks to me that interrupts are going to get enabled if the _first_ handler in the chain _doesn't_ have SA_INTERRUPT set, which isn't the behaviour i'd expect. a later handler might freak if it makes the assumption that interrupts are disabled (or maybe this doesn't happen)...
i'm not sure what the correct thing to do here is... is it okay to enable or disable interrupts for each handler depending on their own SA_INTERRUPT flag? if that's the case then the patch is trivial...
thanks
James