Tyan tiger 2466 mpx dual processor problem
My Tyan Tiger MPX 2466 mobo has two AMD Athlon MP 2400+ CPU's, but when running a standard RedHat or Debian Kernel (i686-smp) it will only recognize one CPU.
When I build my own kernel (2.4.20) with athlon support (k7-smp) it will crash at boot time.
My problem is that I can only log-in remotely, and a console monitor is not (yet) available, so I have no clue about error messages... :( Lucky me to use the lilo -R option, so it will return to the default kernel after an APC reboot.
What could cause this behaviour?
What should be the BIOS settings for MPS (1.1/1.4)? APIC (on/off)?
Thanks in advance,
Michiel Klaver
The Netherlands.
Quoted 4 lines · Michiel Klaver
My Tyan Tiger MPX 2466 mobo has two AMD Athlon MP 2400+ CPU's, but when running a standard RedHat or Debian Kernel (i686-smp) it will only recognize one CPU.
I'm using 2200+ same motherboard,
Debian Kernel-source-2.4.20, 19 and 18-SMP all recognized CPU
Quoted 3 lines
When I build my own kernel (2.4.20) with athlon support (k7-smp) it will crash at boot time.
Not to me... will that be 2400+ bug?
Quoted 11 lines
My problem is that I can only log-in remotely, and a console monitor is not (yet) available, so I have no clue about error messages... :( Lucky me to use the lilo -R option, so it will return to the default kernel after an APC reboot.
What could cause this behaviour?
What should be the BIOS settings for MPS (1.1/1.4)? APIC (on/off)?
I'm using 1.4 APIC on working find.
Hope that help.
Alex