Skip to contentSkip to conversation

HPT372N not supported?

DISCUSSION O.Sezer 1 participant 1 message Mar 19, 2003 PCI

lore
Share & tools
lore

O.Sezer

author
#0 lore raw

pci_ids.h also has to be patched; something like this one:

include/linux/pci_ids.h renamed from include/linux/pci_ids.h.orig +1 -0
@@ -975,6 +975,7 @@
 #define PCI_DEVICE_ID_TTI_HPT372	0x0005
 #define PCI_DEVICE_ID_TTI_HPT302	0x0006
 #define PCI_DEVICE_ID_TTI_HPT371	0x0007
+#define PCI_DEVICE_ID_TTI_HPT372N	0x0009
 #define PCI_DEVICE_ID_TTI_HPT374	0x0008
 
 #define PCI_VENDOR_ID_VIA		0x1106

--
O.Sezer

"Alan Cox" wrote:

Quoted 7 lines · Henning Schroeder

I don=C5=BDt like that solution very much, though, because the highpoint driver uses the scsi subsystem. Looking through highpoints hpt.c file I could not find very much differences in the way the HPT372N is accessed from the HPT372-way. Maybe somebody (Andre Hedrick?) could look through the code and integrate the HPT372N into linux/drivers/ide/pci/hpt366.c? This feat is regrettably way beyound my own programming capability.

Try the patch attached below. The 372N doesn't seem to be that different except that we have to use different pci timing thresholds. The patch below isn't tested as I don't have a 372N.

Quoted 2 lines

I would love to hear about the current status of that chip. I do not need the RAID capability, just the extra IDE ports.

hptraid should already support the raid bits