Debugging hard lockups (hardware?)
Dear team,
This machine locks up solid every few days. Caps Lock, Num Lock, Scroll Lock do not respond. The NMI watchdog does not kick in. Alt-SysRq-keys do not respond. Logs show no hint of any problem (that I recognise) before lockup. Occurs often during scrolling e.g., Mozilla. I swapped the Radeon 7000 for a 7500, then an Nvidia.
I guess hardware. But memtest run exhaustively shows no problem.
Same is true for large numbers of kernels I've tried, mostly Red Hat and -ac kernels, old and new.
current grub kernel line:
kernel /boot/vmlinuz-2.4.20-8custom ro root=LABEL=/ vga=6 console=ttyS0,38400 nmi_watchdog=1 hdm=ide-scsi
I have six 80 G IDE disks, software RAID, LVM on top. On Red Hat 8.0 and 9.
Any hints on how to troubleshoot this (besides replacing motherboard and other components I cannot afford to replace?)
$ cat /proc/mdstat
Personalities : [raid1] [raid5]
read_ahead 1024 sectors
md0 : active raid1 hdc1[1] hda1[0]
10240128 blocks [2/2] [UU]md2 : active raid5 hdk1[3] hdi1[2] hdg1[1] hde1[0]
20480256 blocks level 5, 64k chunk, algorithm 2 [3/3] [UUU]
md1 : active raid5 hdk2[5] hdi2[4] hdg2[2] hde2[3] hdc2[1] hda2[0]
4088064 blocks level 5, 64k chunk, algorithm 2 [5/5] [UUUUU]
md3 : active raid5 hdk3[6] hdi3[4] hdg3[3] hde3[2] hdc3[1] hda3[0]
267514112 blocks level 5, 64k chunk, algorithm 2 [5/5] [UUUUU]
unused devices: <none>
$ lspci 00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 11) 00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 11) 00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 01) 00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 01) 00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 01) 00:1d.7 USB Controller: Intel Corp. 82801DB USB EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 81) 00:1f.0 ISA bridge: Intel Corp. 82801DB ISA Bridge (LPC) (rev 01) 00:1f.1 IDE interface: Intel Corp. 82801DB ICH4 IDE (rev 01) 01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev b2) 02:03.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10) 02:04.0 FireWire (IEEE 1394): NEC Corporation: Unknown device 00f2 (rev 01) 02:08.0 Ethernet controller: Intel Corp. 82801BD PRO/100 VE (LOM) Ethernet Controller (rev 81) 02:0a.0 RAID bus controller: CMD Technology Inc PCI0680 (rev 01) 02:0b.0 RAID bus controller: CMD Technology Inc PCI0680 (rev 01) 02:0c.0 SCSI storage controller: Advanced Micro Devices [AMD] 53c974 [PCscsi] (rev 10) 02:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS) 02:0e.0 RAID bus controller: CMD Technology Inc PCI0649 (rev 02) $ lsmod Module Size Used by Not tainted nls_iso8859-1 3516 1 (autoclean) cmpci 35464 1 (autoclean) soundcore 6436 4 (autoclean) [cmpci] ppp_deflate 4504 2 (autoclean) zlib_deflate 21624 0 (autoclean) [ppp_deflate] osst 48072 0 (autoclean) (unused) st 30736 0 (autoclean) (unused) usb-storage 68276 0 (unused) binfmt_misc 7400 1 parport_pc 19108 1 (autoclean) lp 8996 0 (autoclean) parport 36960 1 (autoclean) [parport_pc lp] nfsd 79920 8 (autoclean) lockd 58128 1 (autoclean) [nfsd] sunrpc 81372 1 (autoclean) [nfsd lockd] autofs 13108 1 (autoclean) n_hdlc 8000 1 ppp_synctty 7840 1 ppp_async 9376 1 ppp_generic 24540 6 [ppp_deflate ppp_synctty ppp_async] slhc 6628 1 [ppp_generic] ne2k-pci 7168 1 (autoclean) 8390 8364 0 (autoclean) [ne2k-pci] e100 63908 1 ipt_multiport 1176 5 (autoclean) ipt_REJECT 3832 2 (autoclean) ipt_limit 1560 2 (autoclean) ipt_MASQUERADE 2136 3 (autoclean) iptable_filter 2412 1 (autoclean) ipt_LOG 4248 11 ipt_state 1080 23 ip_nat_ftp 4016 0 (unused) ip_conntrack_ftp 5264 1 iptable_nat 20824 2 [ipt_MASQUERADE ip_nat_ftp] ip_conntrack 26976 3 [ipt_MASQUERADE ipt_state ip_nat_ftp ip_conntrack_ftp iptable_nat] ip_tables 14840 10 [ipt_multiport ipt_REJECT ipt_limit ipt_MASQUERADE iptable_filter ipt_LOG ipt_state iptable_nat] sg 35820 0 (autoclean) sr_mod 17912 0 (autoclean) ide-scsi 12176 0 ide-cd 35580 0 cdrom 33120 0 [sr_mod ide-cd] loop 12056 3 (autoclean) keybdev 2976 0 (unused) mousedev 5460 1 hid 21956 0 (unused) input 5888 0 [keybdev mousedev hid] usb-uhci 26188 0 (unused) usbcore 78272 2 [usb-storage hid usb-uhci] ext3 69760 11 jbd 51828 11 [ext3] tmscsim 37088 0 sd_mod 13484 0 (unused) scsi_mod 106872 7 [osst st usb-storage sg sr_mod ide-scsi tmscsim sd_mod] $ cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Pentium(R) 4 CPU 2.26GHz stepping : 4 cpu MHz : 2289.252 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm bogomips : 4561.30
$ free
total used free shared buffers cached
Mem: 1030780 1020180 10600 0 158692 633092
-/+ buffers/cache: 228396 802384
Swap: 4088056 31020 4057036
$ df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/md0 10079212 5805256 3761952 61% /
none 515388 0 515388 0% /dev/shm
/dev/main/home 2873984 814604 1913564 30% /home
/dev/main/usr 10321208 5762360 4034560 59% /usr
/dev/main/var 3201076 1168292 1870176 39% /var
/dev/main/var2 24520572 5211756 18063224 23% /var2
/dev/main/nicku 55734652 27123980 26345748 51% /home/nicku
/dev/main/photos 46445552 28598296 15487960 65% /home/nicku/.photos
/dev/main/mail 8256952 5107616 2729908 66% /home/nicku/work/nsmail
/dev/main/ftp 98051740 77431664 15639340 84% /var/ftp
/dev/main/mp3 10321208 8117692 1679228 83% /mp3
/dev/main/cdimage 23738812 18602584 4171540 82% /cdimage
/$ sudo hdparm -tT /dev/md{0,1,2,3}/dev/md0:
Timing buffer-cache reads: 128 MB in 0.36 seconds =355.56 MB/sec
Timing buffered disk reads: 64 MB in 1.67 seconds = 38.32 MB/sec
/dev/md1:
Timing buffer-cache reads: 128 MB in 0.37 seconds =345.95 MB/sec
Timing buffered disk reads: 64 MB in 0.77 seconds = 83.12 MB/sec
/dev/md2:
Timing buffer-cache reads: 128 MB in 0.35 seconds =365.71 MB/sec
Timing buffered disk reads: 64 MB in 1.31 seconds = 48.85 MB/sec
/dev/md3:
Timing buffer-cache reads: 128 MB in 0.35 seconds =365.71 MB/sec
Timing buffered disk reads: 64 MB in 21.93 seconds = 2.92 MB/sec
(last horribly. slow; get zillions of lines in syslog saying stuff like:
Apr 6 14:08:50 nicksbox kernel: raid5: switching cache buffer size, 0 --> 4096 Apr 6 14:08:50 nicksbox kernel: raid5: switching cache buffer size, 0 --> 1024 Apr 6 14:08:50 nicksbox kernel: raid5: switching cache buffer size, 1024 --> 4096 Apr 6 14:08:50 nicksbox kernel: raid5: switching cache buffer size, 0 --> 1024 Apr 6 14:08:50 nicksbox kernel: raid5: switching cache buffer size, 1024 --> 4096 Apr 6 14:08:50 nicksbox kernel: raid5: switching cache buffer size, 0 --> 4096 Apr 6 14:08:50 nicksbox last message repeated 2 times Apr 6 14:08:50 nicksbox kernel: raid5: switching cache buffer size, 4096 -->
1024
does not occur like that with RH 2.4.18-x kernels)
Any pointers to web sites, information that may help, any hints, suggestions, ideas,... all most welcome. Actually, if replacing the motherboard would fix it, I'd do it, but I cannot guess why it should help; Asus motherboards have always been good to me before.
--
Nick Urbanik RHCE [email protected]
Dept. of Information & Communications Technology Hong Kong Institute of Vocational Education (Tsing Yi)
Tel: (852) 2436 8576, (852) 2436 8713 Fax: (852) 2436 8526
PGP: 53 B6 6D 73 52 EE 1F EE EC F8 21 98 45 1C 23 7B ID: 7529555D
GPG: 7FFA CDC7 5A77 0558 DC7A 790A 16DF EC5B BB9D 2C24 ID: BB9D2C24
Quoted 6 lines · Nick Urbanik
Dear team,
This machine locks up solid every few days. Caps Lock, Num Lock, Scroll Lock do not respond. The NMI watchdog does not kick in. Alt-SysRq-keys do not respond. Logs show no hint of any problem (that I recognise) before lockup. Occurs often during scrolling e.g., Mozilla.
I omitted one critical fact: it is only while I am using the machine sitting at the console; it has never happened while connecting via ssh, even when doing plenty of I/O.
--
Nick Urbanik RHCE [email protected]
Dept. of Information & Communications Technology Hong Kong Institute of Vocational Education (Tsing Yi)
Tel: (852) 2436 8576, (852) 2436 8713 Fax: (852) 2436 8526
PGP: 53 B6 6D 73 52 EE 1F EE EC F8 21 98 45 1C 23 7B ID: 7529555D
GPG: 7FFA CDC7 5A77 0558 DC7A 790A 16DF EC5B BB9D 2C24 ID: BB9D2C24
Quoted 7 lines
This machine locks up solid every few days. Caps Lock, Num Lock, Scroll Lock do not respond. The NMI watchdog does not kick in. Alt-SysRq-keys do not respond. Logs show no hint of any problem (that I recognise) before lockup. Occurs often during scrolling e.g., Mozilla. I swapped the Radeon 7000 for a 7500, then an Nvidia.
I guess hardware. But memtest run exhaustively shows no problem.
Have you tried the CPUBURN utilities?
John.
Quoted 7 lines · On Sun, 06 Apr 2003 14:32:27 +0800 Nick Urbanik <[email protected]> wrote:
Dear team,
This machine locks up solid every few days. Caps Lock, Num Lock, Scroll Lock do not respond. The NMI watchdog does not kick in. Alt-SysRq-keys do not respond. Logs show no hint of any problem (that I recognise) before lockup. Occurs often during scrolling e.g., Mozilla. I swapped the Radeon 7000 for a 7500, then an Nvidia.
Does booting with 'noapic' make any difference?
Quoted 2 lines · Nick Urbanik
This machine locks up solid every few days. Caps Lock, Num Lock, Scroll Lock do not respond. The NMI watchdog does not kick in.
For the NMI watchdog to fail (if you have it enabled) requires pretty major disaster to have occurred since the NMI will be delivered through any kind of system hang
Quoted 1 line
I guess hardware. But memtest run exhaustively shows no problem.
Memory errors normally generate "Oops" type lines rather than other stuff
Quoted 4 lines
I have six 80 G IDE disks, software RAID, LVM on top. On Red Hat 8.0 and 9.
Any hints on how to troubleshoot this (besides replacing motherboard and other components I cannot afford to replace?)
Is your PSU up to scratch for six disks ?
Quoted 7 lines
/dev/md3:
Timing buffer-cache reads: 128 MB in 0.35 seconds =365.71 MB/sec
Timing buffered disk reads: 64 MB in 21.93 seconds = 2.92 MB/sec
(last horribly. slow; get zillions of lines in syslog saying stuff like:Apr 6 14:08:50 nicksbox kernel: raid5: switching cache buffer size, 0 --> 4096 Apr 6 14:08:50 nicksbox kernel: raid5: switching cache buffer size, 0 --> 1024 Apr 6 14:08:50 nicksbox kernel: raid5: switching cache buffer size, 1024 -->
Im not sure what this one indicates actually
Quoted 4 lines
Any pointers to web sites, information that may help, any hints, suggestions, ideas,... all most welcome. Actually, if replacing the motherboard would fix it, I'd do it, but I cannot guess why it should help; Asus motherboards have always been good to me before.
Your choice of components looks fine, its all stuff I trust, even if the ethernet card is not good for performance it ought to be fine in general. If it is a faulty part most likely its a one off fault.
Which bits of the system are not being used (sound, video, network ?)
Quoted 6 lines · Alan Cox
Quoted 2 lines
02:0a.0 RAID bus controller: CMD Technology Inc PCI0680 (rev 01) 02:0b.0 RAID bus controller: CMD Technology Inc PCI0680 (rev 01)
...
Your choice of components looks fine, its all stuff I trust, even if the ethernet card is not good for performance it ought to be fine in general. If it is a faulty part most likely its a one off fault.
Note the IDE controller, and 2.5 bugzilla #123 That controller has been nothing but trouble for me.
Dave
Quoted 8 lines · Dave Jones
Quoted 6 lines · Alan Cox
Quoted 2 lines
02:0a.0 RAID bus controller: CMD Technology Inc PCI0680 (rev 01) 02:0b.0 RAID bus controller: CMD Technology Inc PCI0680 (rev 01)
...
Your choice of components looks fine, its all stuff I trust, even if the ethernet card is not good for performance it ought to be fine in general. If it is a faulty part most likely its a one off fault.
Quoted 4 lines
Note the IDE controller, and 2.5 bugzilla #123 That controller has been nothing but trouble for me.
Dave
Yes, it was the first thing I suspected, so I went out to the fabled Golden Shopping Centre and bought all the alternative disk controllers I could (except for 3ware, which I lacked the cash for). I tried HighPoint HPT 370A (Adaptec 1200A), HighPoint HPT368, Promise PDC20270 (FastTrack 100Tx2), and the PDC20276 built onto the motherboard, and a HighPoint HPT302 which didn't work properly at all. I still got the lockups with various permutations of the non-Silicon Image chipsets, and found that to my amazement, the Silicon Image 680 chips gave the best performance. I too had major problems with CMD64x boards on a production 2-CPU system (server for student accounts), so remained with SCSI on that machine.
Bugzilla for the kernel? I didn't know there is one! I'd better find it. Thanks Dave.
--
Nick Urbanik RHCE [email protected]
Dept. of Information & Communications Technology Hong Kong Institute of Vocational Education (Tsing Yi)
Tel: (852) 2436 8576, (852) 2436 8713 Fax: (852) 2436 8526
PGP: 53 B6 6D 73 52 EE 1F EE EC F8 21 98 45 1C 23 7B ID: 7529555D
GPG: 7FFA CDC7 5A77 0558 DC7A 790A 16DF EC5B BB9D 2C24 ID: BB9D2C24
Quoted 2 lines · Nick Urbanik
Bugzilla for the kernel? I didn't know there is one! I'd better find it. Thanks Dave.
At this time, 2.5 only. http://bugzilla.kernel.org
Dave
That controller is perfectly fine, give it a swing in 2.4 and it rocks. 2.5 is the problem not the hardware.
Quoted 11 lines · Dave Jones
Quoted 6 lines · Alan Cox
Quoted 2 lines
02:0a.0 RAID bus controller: CMD Technology Inc PCI0680 (rev 01) 02:0b.0 RAID bus controller: CMD Technology Inc PCI0680 (rev 01)
...
Your choice of components looks fine, its all stuff I trust, even if the ethernet card is not good for performance it ought to be fine in general. If it is a faulty part most likely its a one off fault.Note the IDE controller, and 2.5 bugzilla #123 That controller has been nothing but trouble for me.
Quoted 8 lines
Dave
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Andre Hedrick
LAD Storage Consulting Group
Quoted 2 lines · Andre Hedrick
That controller is perfectly fine, give it a swing in 2.4 and it rocks. 2.5 is the problem not the hardware.
Exactly the same problem in 2.4. Your words on this subject previously..
"Get over it, you have a hardware problem period! I have drives that do this every time."
So which is it ?
It does this with every drive I've tried with it, so I'm incredibly sceptical theres a problem with the drives, especially when they work 100% fine on other controllers.
Dave
Quoted 3 lines · On 06 Apr 2003 19:34:09 +0100 Alan Cox <[email protected]> wrote:
For the NMI watchdog to fail (if you have it enabled) requires pretty major disaster to have occurred since the NMI will be delivered through any kind of system hang
I've a similar hang; no oops; no sysrq; no NMI messages; But mine only happens under 2.5; since long time ago. The one strange thing is that it seems that it's not hanged; since the X pointer moves in 3-5 seconds intervals (it even change the shape in the window's corners).
It happens without X too; but as i said nothing survives... no oops, sysrq, nmi messages, doesn't answer to pings...
I know by the fans' sound that the cpu usage goes to 100%
I'm thinking of a hardware failure too (but the odd X behaviour makes me hesitate); since i don't remember that it failed under 2.4 that i remember of...this box didn't run a lot of 2.4 kernel though.
The box passes memtest86; it's
a 2x800 box, ide disk, 256 ram;
VIA chipset...just in the (very strange) case that somebody has exactly the same box and they have/don't have the same problems. (elitegroup d6vaa motherboard)
Diego Calleja
Quoted 5 lines · Arador
I've a similar hang; no oops; no sysrq; no NMI messages; But mine only happens under 2.5; since long time ago. The one strange thing is that it seems that it's not hanged; since the X pointer moves in 3-5 seconds intervals (it even change the shape in the window's corners).
So its not hanging, but acting like something gets burning CPU. If you can duplicate this in non X next time it occurs use right-alt or shift or ctrl and scrolllock get some data on what its doing.
Quoted 11 lines · On 06 Apr 2003 22:04:55 +0100 Alan Cox <[email protected]> wrote:
Quoted 5 lines · Arador
I've a similar hang; no oops; no sysrq; no NMI messages; But mine only happens under 2.5; since long time ago. The one strange thing is that it seems that it's not hanged; since the X pointer moves in 3-5 seconds intervals (it even change the shape in the window's corners).
So its not hanging, but acting like something gets burning CPU. If you can duplicate this in non X next time it occurs use right-alt or shift or ctrl and scrolllock get some data on what its doing.
It doesn't work either :( (sorry for the delay, but i use X quite a lot and took me a while to reproduce it again in console)
The description is above....a hang that happens randomly in 2.5 from ages; both with and without X; no sysrq or NMI messages.... now i checked that right-alt/shift/ctrl and scrolllock doesn't work... i suspect this might be a hardware failure; i should run it a while under 2.4 to see if i get a similar behaviour....
Re: Debugging hard lockups (hardware?): Power Supply!
In reply to Alan CoxDear Folks,
Quoted 13 lines · Alan Cox
Quoted 2 lines · Nick Urbanik
This machine locks up solid every few days. Caps Lock, Num Lock, Scroll Lock do not respond. The NMI watchdog does not kick in.
For the NMI watchdog to fail (if you have it enabled) requires pretty major disaster to have occurred since the NMI will be delivered through any kind of system hang
Quoted 1 line
I guess hardware. But memtest run exhaustively shows no problem.
Memory errors normally generate "Oops" type lines rather than other stuff
Quoted 6 lines
Quoted 4 lines
I have six 80 G IDE disks, software RAID, LVM on top. On Red Hat 8.0 and 9.
Any hints on how to troubleshoot this (besides replacing motherboard and other components I cannot afford to replace?)
Is your PSU up to scratch for six disks ?
It seems that the 470W ToTheMax power supply was the problem, though I've not tested for more than 17 hours yet.
Yesterday, after adding two disks to the motherboard IDE together with the new 3ware 7506-8 with 8 x 80G disks (a total of 10 disks), the 3ware RAID 5 unit refused to rebuild. Then I noticed that many dma timeout messages appeared in the logs for all the disks. I promptly shut the system down, took my little boy Linus for a walk to the fabled Golden Shopping Center and bought an Antec 550W supply, plus a few more case fans. The 3ware RAID5 unit, and also the kernel md RAID1 built nicely. So far no dma_intr messages have appeared (and it has not locked up).
I wish I had changed the power supply before buying the 3ware card so that I could find out whether the Si680 cards were okay or not! HK$135 * 3 <<< HK$3800 (comparing price of 3 Si680 cards with one 3ware 7506-8). Unfortunately the disks cannot be moved from the 3ware back to the Si680s without another mighty backup and restore.
Quoted 15 lines
Quoted 7 lines
/dev/md3:
Timing buffer-cache reads: 128 MB in 0.35 seconds =365.71 MB/sec
Timing buffered disk reads: 64 MB in 21.93 seconds = 2.92 MB/sec
(last horribly. slow; get zillions of lines in syslog saying stuff like:Apr 6 14:08:50 nicksbox kernel: raid5: switching cache buffer size, 0 --> 4096 Apr 6 14:08:50 nicksbox kernel: raid5: switching cache buffer size, 0 --> 1024 Apr 6 14:08:50 nicksbox kernel: raid5: switching cache buffer size, 1024 -->Im not sure what this one indicates actually
Quoted 4 lines
Any pointers to web sites, information that may help, any hints, suggestions, ideas,... all most welcome. Actually, if replacing the motherboard would fix it, I'd do it, but I cannot guess why it should help; Asus motherboards have always been good to me before.
Quoted 5 lines
Your choice of components looks fine, its all stuff I trust, even if the ethernet card is not good for performance it ought to be fine in general. If it is a faulty part most likely its a one off fault.
Which bits of the system are not being used (sound, video, network ?)
--
Nick Urbanik RHCE nicku(at)vtc.edu.hk
Dept. of Information & Communications Technology Hong Kong Institute of Vocational Education (Tsing Yi)
Tel: (852) 2436 8576, (852) 2436 8713 Fax: (852) 2436 8526
PGP: 53 B6 6D 73 52 EE 1F EE EC F8 21 98 45 1C 23 7B ID: 7529555D
GPG: 7FFA CDC7 5A77 0558 DC7A 790A 16DF EC5B BB9D 2C24 ID: BB9D2C24
Re: Debugging hard lockups (hardware?): Power Supply!
faq's for acpi and ide and no-ping or unrecognized ethernet problems, seek error, random crash
When it seems like there's a bug in hardware or linux but it's just no acpi id, default code runs slower, timing issues crop up, something breaks, kill the scapegoats(swap cards, motherboards, try all config/kern opts, ebay 3ware).
Power supply was the first thing I replaced, going to a 550w Coolmax with the 3 amp 5v standby voltage.
The second thing one should do is flash bios. If bios acpi does not recognize hardware id's, linux reasonable defaults institute pretty good alright solutions which are slower than ideal, and on a system faster than 133fsb and 1ghz cpu that's enough to cause io to miss the love boat with regard to resources and anything relating to timing.
memtest86
I set aside a pile of Promise cards, tried a SiI680, got almost there by setting all options that allowed more time for dma resources to become available. That got me pretty stable, but the bios flash I should have done first finished the job, proper acpi hardware id's making all the fastest code available so dma resources came available soon enough.
Options that may improve stability are--
--don't use acpi=off
--don't use pci=noacpi
--don't go back to a previous kernel
--cmos setup apic off, let linux activate apic --don't oc or push memory before stable(somebody) --kernel local apic on, but try sub-option ioapic off if you
can't ping through your ethernet onboard or card or you see garbage scrolling on boot or you have random
freeze-ups
--kernel opt try anticipatory-scheduling instead of
deadline scheduling for more time for ide ops to live
--cmos pci-delay transaction and hdparm -u1 to unmask
irq would buy time but can't do with sii680 or cmd640
--hdparm -d1 -c1 -p9 -X70 -u0 drive on sii680, pio9 is
a special escape pseudo-mode for sii680, probably -p9 just says "-d1 -c1 -u0 -p4", redundancy doesn't hurt
--turn off unused usb, parallell, audio, acpi sleep and
battery options, anything you don't need, at least until you get the system stable
--3ware cards are cheap on ebay! try everything else first
or you may be disappointed by throwing money at problems. success can strike at any moment--my 3ware card is still in the mail but system passes bonnie++ and cp -aR /usr /tmp [different md's]
-Bob
Quoted 101 lines · Nick Urbanik
Dear Folks,
Quoted 21 lines · Alan Cox
Quoted 4 lines · Nick Urbanik
This machine locks up solid every few days. Caps Lock, Num Lock, Scroll Lock do not respond. The NMI watchdog does not kick in.
For the NMI watchdog to fail (if you have it enabled) requires pretty major disaster to have occurred since the NMI will be delivered through any kind of system hang
Quoted 3 lines
I guess hardware. But memtest run exhaustively shows no problem.
Memory errors normally generate "Oops" type lines rather than other stuff
Quoted 9 lines
Quoted 6 lines
I have six 80 G IDE disks, software RAID, LVM on top. On Red Hat 8.0 and 9.
Any hints on how to troubleshoot this (besides replacing motherboard and other components I cannot afford to replace?)
Is your PSU up to scratch for six disks ?
It seems that the 470W ToTheMax power supply was the problem, though I've not tested for more than 17 hours yet.
Yesterday, after adding two disks to the motherboard IDE together with the new 3ware 7506-8 with 8 x 80G disks (a total of 10 disks), the 3ware RAID 5 unit refused to rebuild. Then I noticed that many dma timeout messages appeared in the logs for all the disks. I promptly shut the system down, took my little boy Linus for a walk to the fabled Golden Shopping Center and bought an Antec 550W supply, plus a few more case fans. The 3ware RAID5 unit, and also the kernel md RAID1 built nicely. So far no
dma_intrmessages have appeared (and it has not locked up).I wish I had changed the power supply before buying the 3ware card so that I could find out whether the Si680 cards were okay or not! HK$135 * 3 <<< HK$3800 (comparing price of 3 Si680 cards with one 3ware 7506-8). Unfortunately the disks cannot be moved from the 3ware back to the Si680s without another mighty backup and restore.
Quoted 19 lines
Quoted 9 lines
/dev/md3:Timing buffer-cache reads: 128 MB in 0.35 seconds =365.71 MB/sec Timing buffered disk reads: 64 MB in 21.93 seconds = 2.92 MB/sec (last horribly. slow; get zillions of lines in syslog saying stuff like: Apr 6 14:08:50 nicksbox kernel: raid5: switching cache buffer size, 0 --> 4096 Apr 6 14:08:50 nicksbox kernel: raid5: switching cache buffer size, 0 --> 1024 Apr 6 14:08:50 nicksbox kernel: raid5: switching cache buffer size, 1024 -->Im not sure what this one indicates actually
Quoted 6 lines
Any pointers to web sites, information that may help, any hints, suggestions, ideas,... all most welcome. Actually, if replacing the motherboard would fix it, I'd do it, but I cannot guess why it should help; Asus motherboards have always been good to me before.
Quoted 7 lines
Your choice of components looks fine, its all stuff I trust, even if the ethernet card is not good for performance it ought to be fine in general. If it is a faulty part most likely its a one off fault.
Which bits of the system are not being used (sound, video, network ?)
--
Nick Urbanik RHCE nicku(at)vtc.edu.hk
Dept. of Information & Communications Technology Hong Kong Institute of Vocational Education (Tsing Yi)
Tel: (852) 2436 8576, (852) 2436 8713 Fax: (852) 2436 8526
PGP: 53 B6 6D 73 52 EE 1F EE EC F8 21 98 45 1C 23 7B ID: 7529555D
GPG: 7FFA CDC7 5A77 0558 DC7A 790A 16DF EC5B BB9D 2C24 ID: BB9D2C24-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/