NFS support for PerlFS

I'm looking to add support to the PerlFS filesystem so
it can be exported using NFS. From reading the
interface requirements it would seem the way to do
that would be to turn on the FS_REQUIRES_DEV flag in
the file_system_type structure that get's registered.
This works execpt I then need to pass a valid device
file into the mount command or mount doesn't work. The device I pass in doesn't have any bearing on the filesystem that get's mounted which doesn't really make
much sense.

Is there any way of making the NFS server not
check the NFS_REQUIRES_DEV flag?

-Eric

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs