MPC860 and Compact Flash Card in True Ide Mode
hello ,
Dan wrote in returning SangTae Ha "MPC850 and ATA/IDE"
Quoted 7 lines
There are at least three easy and inexpensive ways people add ATA/IDE to the 8xx processors for embedded systems:
Connect to PCMCIA interface
Use a simple CPLD between the processor bus and disk Program one of the UPMs to generate timing and then externally buffer the signals
I use the third way (UPMB) to add ATA/IDE (SanDisk 16M) to Mpc860T for my embedded system and OS is MVL PE3.0 in my board. According to MPC860UM, Program the UPMs in the following steps:
1. Write patterns into the RAM array.
2. Program MPTPR
3. Program the machine mode register (MAMR and MBMR).
4. Set up BRx and ORx.
But I have a difficulty to write patterns into the RAM array because I know little UPM timing. Who can give me a RAM table and MPTPR, MBMR example?
Thanks in advance!
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/