Update NetVia with V2 board support

Wolfgang Hi

The attached patch adds support in u-boot for the NetVia V2 board.

Possible points of interest are:

The LEDs are located on an external register so the status_led code got moved to the drivers directory and abstracted.

The serial console is provided by a max3100 SPI/UART converter chip, file drivers/serial_max3100.c

Awaiting comments...

Regards

Pantelis

Sorry, attatched size limit removed the patch.

Here it is compressed.

Regards

Pantelis

-------------- next part --------------
A non-text attachment was scrubbed...
Name: u-boot_netvia_v2.patch.gz
Type: application/x-tar
Size: 10754 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20030619/3d7f242b/attachment.tar

Sorry, this patch does not apply cleanly because it contains modifications you submitted with earlier patches, which have been added since.

Please re-sync against top of CVS, and resubmit.

Best regards,

Wolfgang Denk

Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
While most peoples' opinions change, the conviction of their correct-
ness never does.

Sorry, the firewall blocks cvs access, so I have to work on repository tarballs.

I'll get the latest and retry

Regards

Pantelis