Problem with GMFSK.
73 to all.
My name is David, qth near Lisbon and call is CT1DRB.
I use GMFSK and it works very fine indeed. Now i have 2 soundcards in my computer: one Creative Sound Blaster AudioPCI64V as snd-0 and one CM8738 as snd-1.
I want to use the first one to ham comms so i configured GMFSK to use /dev/dsp0. When it starts is all fine, i starts with mode MFSK16 and has reception, but when i change mode to, ie rtty, GMFSK changes to PAUSED and stops to work. This behavior does not happen all the times but it is seldom.
Any help will be welcome here.
Best 73 to all.
CT1DRB
David Quental
Hi David,
Quoted 5 lines
I want to use the first one to ham comms so i configured GMFSK to use
/dev/dsp0. When it starts is all fine, i starts with mode MFSK16 and has reception, but when i change mode to, ie rtty, GMFSK changes to PAUSED and stops to work. This behavior does not happen all the times but it is seldom.
What version of gMFSK and what distribution/kernel are you using?
Are you starting gMFSK from an xterm or similar, do you see any error/warning messages in that xterm?
Does the application lock up completely? If you move another window on top of it and then away, is the gMFSK window re-painted or left gray? Can you restart the modem by pressing the green lightning bolt?
Does this bug happen only when you have two soundcards or is that not relevant? Could you send me the output of: ls -l /dev/dsp*
Signature · 3 lines
Tomi Manninen Internet: [email protected] OH2BNS AX.25: [email protected] KP20ME04 Amprnet: [email protected]