hacking DSDT [-WAS: freeze with 1.0.2]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): 200307230048.35698.mflt1-DTdK3Ks6N5kHTnRCetW4+N0b+6lKrnBL@public.gmane.org
Quoted 13 lines · Michael Frank
Quoted 9 lines · Robert Woerle
Quoted 6 lines · Michael Frank
Quoted 3 lines · Robert Woerle
Michael Frank schrieb:
Quoted 10 lines
Had a lock at your dmesg's, this link setup is a much more beautiful example (a bigger mess) than my setup.
The remaining problem is that multiple links are BIOS pre-assigned to IRQ5 (one even invalidly).
The patch sent to you does not modify pre-assigned links, so what we have to do is to scan all links and re-assign or disable the redundant ones, and possibly modify the DSDT as there seems to be no choice other than IRQ5.
Please send your bzip2'd DSDT (
/proc/acpi/dsdt), and give me a bit of time...
ok , i do now dig myself in the dsdt and try to figure something out ...
i found the IRQ settings and wanted to change some irq`s so that the IRQ 5 gets used by one device alone ... but when i want to compile my dsdt with iasl it get the error
dsdt.dsl 904: FIELD(PUIC,DWordAcc, Lock, Preserve)
Error 1047 - ^ Access width is greater than
region size
do you know something ... it happens also on my plain unchanged original dsdt !!!
Quoted 6 lines
Regards
Michael
Signature · 21 lines
_____________________________________ *Robert Woerle Linux & Customer Support* *PaceBlade Technology Europe SA* phone: +49 89 552 99935 fax: +49 89 552 99910 mobile: +49 179 474 45 27 email: [email protected] <mailto:[email protected]> web: http://www.paceblade.com _____________________________________ ------------------------------------------------------- This SF.net email is sponsored by: VM Ware With VMware you can run multiple operating systems on a single machine. WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the same time. Free trial click here: http://www.vmware.com/wl/offer/345/0
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi
http://www.cpqlinux.com/acpi-howto.html#fix_broken_dsdt
read:
# Error 1051 - Access width of Field Unit extends beyond region limit
should be the same problem.
Quoted 48 lines · Robert Woerle
Quoted 16 lines · Michael Frank
Quoted 9 lines · Robert Woerle
Quoted 6 lines · Michael Frank
Quoted 3 lines · Robert Woerle
Michael Frank schrieb:
Had a lock at your dmesg's, this link setup is a much more beautiful example (a bigger mess) than my setup.
Quoted 10 lines
The remaining problem is that multiple links are BIOS pre-assigned to IRQ5 (one even invalidly).
The patch sent to you does not modify pre-assigned links, so what we have to do is to scan all links and re-assign or disable the redundant ones, and possibly modify the DSDT as there seems to be no choice other than IRQ5.
Please send your bzip2'd DSDT (
/proc/acpi/dsdt), and give me a bit of time...ok , i do now dig myself in the dsdt and try to figure something out ...
i found the IRQ settings and wanted to change some irq`s so that the IRQ 5 gets used by one device alone ...
but when i want to compile my dsdt with iasl it get the errordsdt.dsl 904:
FIELD(PUIC,DWordAcc, Lock, Preserve)
Error 1047 - ^ Access width is greater than
region sizedo you know something ... it happens also on my plain unchanged original dsdt !!!
Quoted 3 lines
Regards
Michael
Signature · 10 lines
Sérgio Basto ------------------------------------------------------- This SF.net email is sponsored by: VM Ware With VMware you can run multiple operating systems on a single machine. WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the same time. Free trial click here: http://www.vmware.com/wl/offer/345/0