Skip to contentSkip to conversation

raid1 error while rewind tape

DISCUSSION Dirk Jakobsmeier 2 participants 2 messages Sep 1, 2003

lore
Share & tools
lore
#0 lore raw

Hi you all

i have a big problem with running my backup server with kernel 2.4.21 and a raid1. Both, the scsi disks and the tape use the same scsi controller. While i let the system rewind the tape, and if this command needs long time, the scsi driver from kernel recogizes an error.

kernel: scsi : aborting command due to timeout.
kernel: SCSI disk error
kernel: I/O error
kernel: raid1: Disk failure
kernel: ^IOperation continuing on 1 devices
kernel: md: updating md2 RAID superblock on device
kernel: md: recovery thread got woken up
kernel: md2: resyncing spare disk
kernel: RAID1 conf printout:
.
.
.

Is there a possibility to handle this problem, or do i have to install a second scsi controller?

Thanks for any help.

Dirk

#1 lore raw
Quoted 2 lines · Dirk Jakobsmeier

While i let the system rewind the tape, and if this command needs long time, the scsi driver from kernel recogizes an error.

You might want to check the FAQs for info on "SCSI disconnect" support. Most modern SCSI tape drives support this, but without any configuration details on the tape drive or the host adapter, it's hard to say whether it will work for you.

Chances are that more people will have answers on one of the SCSI-specific lists.

-C