Ethtool setting is not changed in the Linux redhat 8.0?
Hi All,
My system is Linux red hat 8.0. I have installed Ethtool1.8. And I made change in SIOCETHTOOL for #define SIOCETHTOOL 0x8947 --This will give output for all the argument except -i //#define SIOCETHTOOL 0x8946 ---This will give details about -i argument only.
See the exection below:
for listing:
[root sip7 <mailto:root%20sip7> ethtool-1.8]# ./ethtool -a eth0 Pause parameters for eth0:
Autonegotiate: off
RX: off
TX: off
[root sip7 <mailto:root%20sip7> ethtool-1.8]# ./ethtool -A eth0 rx on // The rx is changed
[root sip7 <mailto:root%20sip7> ethtool-1.8]# ./ethtool -a eth0 Pause parameters for eth0:
Autonegotiate: off
RX: off // rx not refelected
TX: off
[root sip7 <mailto:root%20sip7> ethtool-1.8]# ./ethtool -A eth0 rx off rx unmodified, ignoring
no pause parameters changed, aborting
This Urgent!!!!!!!!!!!!!!!!
Any body help you out ?????????????????
current ethernet dev Details:-
eth0 Link encap:Ethernet HWaddr 00:80:C8:92:86:7E inet addr:192.168.66.7 Bcast:192.168.66.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:13344 errors:0 dropped:0 overruns:0 frame:0 TX packets:9143 errors:4 dropped:0 overruns:0 carrier:6 collisions:0 txqueuelen:100
RX bytes:5695058 (5.4 Mb) TX bytes:1323452 (1.2 Mb) Interrupt:12 Base address:0xa000
Thank in Advanced,
Regards,
Elan
Signature · 33 lines
T.Elanjchezhiyan
Core Technology Group
SIP Technologies & Exports Ltd
G4, Elnet Software City,CPT Road
Taramani, Chennai 600 113
India
Phone: +91-44-22541401
+91-44-22541031
Fax : +91-44-22541475
Website: http://www.siptech.com
-----------------------------------------
--
T.Elanjchezhiyan
Core Technology Group
SIP Technologies & Exports Ltd
G4, Elnet Software City,CPT Road
Taramani, Chennai 600 113
India
Phone: +91-44-22541401
+91-44-22541031
Fax : +91-44-22541475
Website: http://www.siptech.com
-----------------------------------------
.