2.6.0-test4
Error report from this version.
.config not attached as it made post too large for vger earlier post was a follow up to this one.
dmesg attached
pieces of logs attached
OS variant Mandrake 9.2 rc2
Kernel: 2.6.0-test4
Lots of problems with this kernel starting up, however, with manual intervention along the boot process I can make it come up with fair functionality.
1) The only way I could get console on boot was to have this config in lilo.conf and boot to single user mode (-s) image=/boot/vmlinuz
label="new_linux"
root=/dev/hdb1
initrd=/boot/initrd.img
append="devfs=mount video=rivafb:1024x768-24@100"
read-only2) Next problem is modules some auto load with existing scripts but most don't. (With this compile attempt almost everything was built in and not modules so you don't see any modules loaded at single user boot) The worst offenders are the NLS modules. I manually went down the list of all modules compiled and loaded them 1 by 1 with insmod.
3) At this point I do a mount -a and can now mount the NTFS and VFAT modules. So I walk the the init ladder 1,2,3,4,5 and have a somewhat functional X environment.
4) Problems include:
The USB and CUPs problem that I see the USB tree under
"/sys/bus/usb" where-as under /proc/bus/usb I see nothing.
This may break a lot of existing code such as CUPS Is is suppose to be this way? This means USB printer is not seen by the environment but seen on boot.
request_module: failed /sbin/modprobe -- snd-card-0. error = -16
(Is this related to XINE's sound not working but just ALSA sound
card or just OSS sound from TV working?) BTW in 2.4.x everything works.
videodev: "BT878(Pinnacle PCTV Studio/Ra)" has no release callback.
Please fix your driver for proper sysfs support, see http://lwn.net/Articles/36850/
videodev: "bt848/878 vbi" has no release callback. Please fix your
driver for proper sysfs support, see http://lwn.net/Articles/36850/
process `named' is using obsolete setsockopt SO_BSDCOMPAT
nmbd[2950]: find_response_record: response packet id 25574
received with no matching record.
nmbd[2950]: find_response_record: response packet id 25575
received with no matching record.
FAT: codepage cp850 not found
JAVA
java_binfmt: /etc/rc4.d/S83java_binfmt: line 13:/proc/sys/fs/binfmt_misc/register: No such file or directory
java_binfmt: /etc/rc4.d/S83java_binfmt: line 14:/proc/sys/fs/binfmt_misc/register: No such file or directory
java_binfmt: /etc/rc4.d/S83java_binfmt: line 15:/proc/sys/fs/binfmt_misc/register: No such file or directory
Sep 2 22:51:16 dali rc: Starting java_binfmt: failed
Going to init level 5 I got a bunch of strange errors...
I am wondering if something got called when it should not have been
(maybe another xinitd typ process) as I see:
modprobe: FATAL: Module /dev/beep not found.
rc: Starting java_binfmt: failed
modprobe: FATAL: Module /dev/aload* not found.
Module /dev/sndstat not found etc...
Some of this may just be that I compiled lots of stuff non-modular
to get around most of the module loading problems and the Mandrake scripts are expecting those particular modules.
Back to the printer... I see
...
modprobe: FATAL: Module /dev/ptal_mlcd not found
modprobe: FATAL: Module /dev/ptal_printd not found.
ptal-mlcd: SYSLOG at ExMgr.cpp:652, dev=<mlc:usb:PHOTOSMART_P1000>,
pid=5656, e=2, t=1062565032 ptal-mlcd successfully initialized.
ptal-printd: ptal-printd(mlc:usb:PHOTOSMART_P1000) successfully
initialized using /var/run/ptal-printd/mlc_usb_PHOTOSMART_P1000*.
Sep 2 23:57:12 dali ptal-photod: ptal-photod(mlc:usb:PHOTOSMART_P1000) successfully initialized, listening on port 5703. But it doesn't... A restart on CUPS gets:
Stopping CUPS printing system: [ OK ]
Starting CUPS printing system:
ptal-mlcd: ERROR at ExMgr.cpp:4058, dev=<mlc:usb:PHOTOSMART_P1000@/dev/usb/lp0>, pid=6502, e=20, t=1062569016
libusbFindDevice: Couldn't find device!
f3000 (ACPI NVS)
BIOS-e820: 0000000037ff3000 - 0000000038000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
895MB LOWMEM available.
On node 0 totalpages: 229360
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225264 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI: RSDP (v000 GBT ) @ 0x000f6b60
ACPI: RSDT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x37ff3000
ACPI: FADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x37ff3040
ACPI: DSDT (v001 GBT AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: MADT not present
Building zonelist for node : 0
Kernel command line: BOOT_IMAGE=new_linux ro root=341 devfs=mount video=rivafb:1024x768-24@100 -s Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 997.828 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1970.17 BogoMIPS
Memory: 903208k/917440k available (2797k kernel code, 13452k reserved, 1085k data, 188k init, 0k highmem) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
-> /dev
-> /dev/console
-> /root
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium III (Coppermine) stepping 0a
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 997.0327 MHz.
..... host bus clock speed is 132.0976 MHz.
PM: Adding info for No Bus:legacy
Initializing RT netlink socket
PCI: PCI BIOS revision 2.10 entry at 0xfb380, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
BIO: pool of 256 setup, 14Kb (56 bytes/bio)
biovec pool[0]: 1 bvecs: 256 entries (12 bytes)
biovec pool[1]: 4 bvecs: 256 entries (48 bytes)
biovec pool[2]: 16 bvecs: 256 entries (192 bytes)
biovec pool[3]: 64 bvecs: 256 entries (768 bytes)
biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
ACPI: Subsystem revision 20030813
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PM: Adding info for No Bus:pci0000:00
PM: Adding info for pci:0000:00:00.0
PM: Adding info for pci:0000:00:01.0
PM: Adding info for pci:0000:00:07.0
PM: Adding info for pci:0000:00:07.1
PM: Adding info for pci:0000:00:07.2
PM: Adding info for pci:0000:00:07.3
PM: Adding info for pci:0000:00:09.0
PM: Adding info for pci:0000:00:0a.0
PM: Adding info for pci:0000:00:0a.1
PM: Adding info for pci:0000:00:0b.0
PM: Adding info for pci:0000:00:0b.1
PM: Adding info for pci:0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fc060
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc088, dseg 0xf0000
PM: Adding info for No Bus:pnp0
PM: Adding info for pnp:00:00
PM: Adding info for pnp:00:01
PM: Adding info for pnp:00:02
PM: Adding info for pnp:00:03
PM: Adding info for pnp:00:04
PM: Adding info for pnp:00:05
PM: Adding info for pnp:00:06
PM: Adding info for pnp:00:07
PM: Adding info for pnp:00:08
PM: Adding info for pnp:00:09
PM: Adding info for pnp:00:0c
PM: Adding info for pnp:00:0d
PM: Adding info for pnp:00:0f
PM: Adding info for pnp:00:10
PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
SCSI subsystem initializeddrivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
rivafb: nVidia device/chipset 10DE0110
rivafb: Detected CRTC controller 0 being used
rivafb: RIVA MTRR set to ON
rivafb: PCI nVidia NV10 framebuffer ver 0.9.5b (nVidiaGeForce2-M, 32MB @ 0xD8000000)
pty: 256 Unix98 ptys configured
IA-32 Microcode Update Driver: v1.11 <[email protected]>
ikconfig 0.5 with /proc/ikconfig
Journalled Block Device driver loaded
devfs: v1.22 (20021013) Richard Gooch ([email protected])
devfs: boot_options: 0x1
udf: registering filesystem
Activating ISA DMA hang workarounds.
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU0] (supports C1 C2, 2 throttling states)
PM: Adding info for No Bus:pnp1
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.11a
Non-volatile memory driver v1.2
Linux agpgart interface v0.100 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
Using anticipatory scheduling elevator
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
PM: Adding info for platform:floppy0
Intel(R) PRO/100 Network Driver - version 2.3.18-k1
Copyright (c) 2003 Intel Corporation
e100: selftest OK.
e100: eth0: Intel(R) PRO/100 Network Connection
Linux video capture interface: v1.00
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xxVP_IDE: IDE controller at PCI slot 0000:00:07.1VP_IDE: chipset revision 16VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xxVP_IDE: VIA vt82c596b (rev 23) IDE UDMA66 controller on pci0000:00:07.1
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMAhda: WDC WD600BB-32BSA0, ATA DISK drive
PM: Adding info for No Bus:ide0
hdb: WDC WD800BB-75CAA0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
PM: Adding info for ide:0.0
PM: Adding info for ide:0.1
hdc: SAMSUNG CD-R/RW SW-216B Q001 20010913, ATAPI CD/DVD-ROM drive
PM: Adding info for No Bus:ide1
hdd: DVD-ROM DDU1621, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
PM: Adding info for ide:1.0
PM: Adding info for ide:1.1
hda: max request size: 128KiB
hda: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(66)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
hdb: max request size: 128KiB
hdb: Host Protected Area detected.
current capacity is 156250000 sectors (80000 MB) native capacity is 156301488 sectors (80026 MB)
hdb: 156250000 sectors (80000 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(66)
/dev/ide/host0/bus0/target1/lun0: p1 p2 p3 p4 < p5 p6 p7 >
hdc: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12end_request: I/O error, dev hdd, sector 0
hdd: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
uhci-hcd 0000:00:07.2: UHCI Host Controller
uhci-hcd 0000:00:07.2: irq 10, io base 0000d400
uhci-hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
PM: Adding info for usb:usb1
hub 1-0:0: USB hub found
hub 1-0:0: 2 ports detected
PM: Adding info for usb:1-0:0drivers/usb/core/usb.c: registered new driver usblpdrivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.drivers/usb/core/usb.c: registered new driver hiddevdrivers/usb/core/usb.c: registered new driver hiddrivers/usb/input/hid-core.c: v2.0:USB HID core driverdrivers/usb/core/usb.c: registered new driver usbscannerdrivers/usb/image/scanner.c: 0.4.14:USB Scanner Driver
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
I2O Core - (C) Copyright 1999 Red Hat Software
I2O: Event thread created as pid 12
i2o: Checking for PCI I2O controllers...
I2O configuration manager v 0.04.
(C) Copyright 1999 Red Hat Software
I2O Block Storage OSM v0.9
(c) Copyright 1999-2001 Red Hat Software.i2o_block: Checking for Boot device...i2o_block: Checking for I2O Block devices...
i2c /dev entries driver module version 2.7.0 (20021208)
Advanced Linux Sound Architecture Driver Version 0.9.6 (Wed Aug 20 20:27:13 2003 UTC).request_module: failed /sbin/modprobe -- snd-card-0. error = -16
ALSA device list:
#0: Sound Blaster Live! (rev.10) at 0xdc00, irq 5
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
BIOS EDD facility v0.09 2003-Jan-22, 2 devices found
ACPI: (supports S0 S1 S4 S4bios S5)
hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x301
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 188k freed
hub 1-0:0: new USB device on port 1, assigned address 2
PM: Adding info for usb:1-1
input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse� Optical] on usb-0000:00:07.2-1
PM: Adding info for usb:1-1:0
hub 1-0:0: debounce: port 2: delay 100ms stable 4 status 0x101
hub 1-0:0: new USB device on port 2, assigned address 3
PM: Adding info for usb:1-2drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 1 proto 2 vid 0x03F0 pid 0x3002
PM: Adding info for usb:1-2:0
EXT3 FS on hdb1, internal journal
Adding 2096472k swap on /dev/hdb2. Priority:-1 extents:1
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
FAT: codepage cp850 not found
FAT: codepage cp850 not found
bttv: driver version 0.9.11 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Host bridge is 0000:00:00.0
bttv: Host bridge is 0000:00:07.3
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:00:0b.0, irq: 10, latency: 64, mmio: 0xe5101000
bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
bttv0: using: BT878(Pinnacle PCTV Studio/Ra) [card=39,autodetected]
PM: Adding info for No Bus:i2c-0
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: miro: id=3 tuner=2 radio=no stereo=no
bttv0: using tuner=2
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
videodev: "BT878(Pinnacle PCTV Studio/Ra)" has no release callback. Please fix your driver for proper sysfs support, see http://lwn.net/Articles/36850/
bttv0: registered device video0
videodev: "bt848/878 vbi" has no release callback. Please fix your driver for proper sysfs support, see http://lwn.net/Articles/36850/
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
loop: loaded (max 8 devices)
btaudio: driver version 0.7 loaded [digital+analog]
btaudio: Bt878 (rev 17) at 00:0b.1, irq: 10, latency: 64, mmio: 0xe5102000
btaudio: using card config "default"
btaudio: registered device dsp1 [digital]
btaudio: registered device dsp2 [analog]
btaudio: registered device mixer1
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.nls_big5: Unknown parameter `nls_cp1250.ko'
NTFS driver 2.1.4 [Flags: R/O MODULE].
nbd: registered device at major 43
PM: Adding info for No Bus:i2c-1
tuner: chip found @ 0xc0
tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles))
registering 0-0060
PM: Adding info for i2c:0-0060
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
pwc Philips PCA645/646 + PCVC675/680/690 + PCVC730/740/750 webcam module version 8.11 loaded.
pwc Also supports the Askey VC010, various Logitech QuickCams, Samsung MPC-C10 and MPC-C30,
pwc the Creative WebCam 5, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.drivers/usb/core/usb.c: registered new driver Philips webcamdrivers/usb/media/se401.c: SE401 usb camera driver version 0.24 registeringdrivers/usb/core/usb.c: registered new driver se401drivers/usb/core/usb.c: registered new driver ov511drivers/usb/media/ov511.c: v1.64 for Linux 2.5 : ov511 USB Camera Driverdrivers/usb/core/usb.c: registered new driver rio500drivers/usb/misc/rio500.c: v1.1:USB Rio 500 driverdrivers/usb/core/usb.c: registered new driver uss720drivers/usb/misc/uss720.c: v0.5:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip drivers/usb/serial/usb-serial.c: USB Serial support registered for Genericdrivers/usb/core/usb.c: registered new driver usbserialdrivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0drivers/usb/core/usb.c: registered new driver microtekX6drivers/usb/core/usb.c: registered new driver hpusbscsi
NTFS-fs warning (device hda1): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future. NTFS volume version 3.0.
e100: eth0 NIC Link is Up 100 Mbps Full duplex
microcode: CPU0 already at revision 1 (current=1)
microcode: freed 2048 bytes
process `named' is using obsolete setsockopt SO_BSDCOMPAT
process `named' is using obsolete setsockopt SO_BSDCOMPAT
process `named' is using obsolete setsockopt SO_BSDCOMPAT
process `named' is using obsolete setsockopt SO_BSDCOMPAT
process `named' is using obsolete setsockopt SO_BSDCOMPAT
process `named' is using obsolete setsockopt SO_BSDCOMPAT
smbfs: Unrecognized mount option noexec
smbfs: Unrecognized mount option noexec
smbfs: Unrecognized mount option noexec
smbfs: Unrecognized mount option noexec
Sep 2 22:47:56 dali kernel: FAT: codepage cp850 not found Sep 2 22:47:56 dali kernel: FAT: codepage cp850 not found Sep 2 22:47:56 dali kernel: nls_big5: Unknown parameter `nls_cp1250.ko' Sep 2 22:47:56 dali kernel: NTFS-fs warning (device hda1): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future. Sep 2 22:47:56 dali kernel: e100: eth0 NIC Link is Up 100 Mbps Full duplex Sep 2 22:47:55 dali kernel: klogd 1.4.1, log source = /proc/kmsg started. Sep 2 22:47:55 dali kernel: Inspecting /boot/System.map-2.6.0-test4 Sep 2 22:47:56 dali kernel: Loaded 34081 symbols from /boot/System.map-2.6.0-test4. Sep 2 22:47:56 dali kernel: Symbols match kernel version 2.6.0. Sep 2 22:47:56 dali kernel: No module symbols loaded - kernel modules not enabled. Sep 2 22:47:56 dali kernel: BIOS-provided physical RAM map: Sep 2 22:47:56 dali kernel: 895MB LOWMEM available. Sep 2 22:47:56 dali kernel: DMI 2.2 present. Sep 2 22:47:56 dali kernel: ACPI: RSDP (v000 GBT ) @ 0x000f6b60 Sep 2 22:47:56 dali kernel: ACPI: RSDT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x37ff3000 Sep 2 22:47:56 dali kernel: ACPI: FADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x37ff3040 Sep 2 22:47:56 dali kernel: ACPI: DSDT (v001 GBT AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 Sep 2 22:47:56 dali kernel: Initializing CPU#0 Sep 2 22:47:56 dali kernel: Memory: 903208k/917440k available (2797k kernel code, 13452k reserved, 1085k data, 188k init, 0k highmem) Sep 2 22:47:56 dali kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Sep 2 22:47:56 dali kernel: -> /dev Sep 2 22:47:56 dali kernel: -> /dev/console Sep 2 22:47:56 dali kernel: -> /root Sep 2 22:47:56 dali kernel: CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 Sep 2 22:47:56 dali kernel: CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 Sep 2 22:47:56 dali kernel: CPU: L1 I cache: 16K, L1 D cache: 16K Sep 2 22:47:56 dali kernel: CPU: L2 cache: 256K Sep 2 22:47:56 dali kernel: CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 Sep 2 22:47:56 dali kernel: Intel machine check architecture supported. Sep 2 22:47:56 dali kernel: Intel machine check reporting enabled on CPU#0. Sep 2 22:47:56 dali kernel: Enabling fast FPU save and restore... done. Sep 2 22:47:56 dali kernel: Enabling unmasked SIMD FPU exception support... done. Sep 2 22:47:56 dali kernel: Checking 'hlt' instruction... OK. Sep 2 22:47:56 dali kernel: PM: Adding info for No Bus:legacy Sep 2 22:47:56 dali kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb380, last bus=1 Sep 2 22:47:56 dali kernel: PCI: Using configuration type 1 Sep 2 22:47:56 dali kernel: mtrr: v2.0 (20020519) Sep 2 22:47:56 dali kernel: ACPI: Subsystem revision 20030813 Sep 2 22:47:56 dali kernel: ACPI: Interpreter enabled Sep 2 22:47:56 dali kernel: ACPI: Using PIC for interrupt routing Sep 2 22:47:56 dali kernel: ACPI: PCI Root Bridge [PCI0] (00:00) Sep 2 22:47:56 dali kernel: PM: Adding info for No Bus:pci0000:00 Sep 2 22:47:56 dali kernel: PM: Adding info for pci:0000:00:00.0 Sep 2 22:47:56 dali kernel: PM: Adding info for pci:0000:00:01.0 Sep 2 22:47:56 dali kernel: PM: Adding info for pci:0000:00:07.0 Sep 2 22:47:56 dali kernel: PM: Adding info for pci:0000:00:07.1 Sep 2 22:47:56 dali kernel: PM: Adding info for pci:0000:00:07.2 Sep 2 22:47:56 dali kernel: PM: Adding info for pci:0000:00:07.3 Sep 2 22:47:56 dali kernel: PM: Adding info for pci:0000:00:09.0 Sep 2 22:47:56 dali kernel: PM: Adding info for pci:0000:00:0a.0 Sep 2 22:47:56 dali kernel: PM: Adding info for pci:0000:00:0a.1 Sep 2 22:47:56 dali kernel: PM: Adding info for pci:0000:00:0b.0 Sep 2 22:47:56 dali kernel: PM: Adding info for pci:0000:00:0b.1 Sep 2 22:47:56 dali kernel: PM: Adding info for pci:0000:01:00.0 Sep 2 22:47:56 dali kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Sep 2 22:47:56 dali kernel: Linux Plug and Play Support v0.97 (c) Adam Belay Sep 2 22:47:56 dali kernel: PnPBIOS: Scanning system for PnP BIOS support... Sep 2 22:47:56 dali kernel: PnPBIOS: Found PnP BIOS installation structure at 0xc00fc060 Sep 2 22:47:56 dali kernel: PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc088, dseg 0xf0000 Sep 2 22:47:56 dali kernel: PM: Adding info for No Bus:pnp0 Sep 2 22:47:56 dali kernel: PM: Adding info for pnp:00:00 Sep 2 22:47:56 dali kernel: PM: Adding info for pnp:00:01 Sep 2 22:47:56 dali kernel: PM: Adding info for pnp:00:02 Sep 2 22:47:56 dali kernel: PM: Adding info for pnp:00:03 Sep 2 22:47:56 dali kernel: PM: Adding info for pnp:00:04 Sep 2 22:47:56 dali kernel: PM: Adding info for pnp:00:05 Sep 2 22:47:56 dali kernel: PM: Adding info for pnp:00:06 Sep 2 22:47:56 dali kernel: PM: Adding info for pnp:00:07 Sep 2 22:47:56 dali kernel: PM: Adding info for pnp:00:08 Sep 2 22:47:56 dali kernel: PM: Adding info for pnp:00:09 Sep 2 22:47:56 dali kernel: PM: Adding info for pnp:00:0c Sep 2 22:47:56 dali kernel: PM: Adding info for pnp:00:0d Sep 2 22:47:56 dali kernel: PM: Adding info for pnp:00:0f Sep 2 22:47:56 dali kernel: PM: Adding info for pnp:00:10 Sep 2 22:47:56 dali kernel: PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver Sep 2 22:47:56 dali kernel: SCSI subsystem initialized Sep 2 22:47:56 dali kernel: drivers/usb/core/usb.c: registered new driver usbfs Sep 2 22:47:56 dali kernel: drivers/usb/core/usb.c: registered new driver hub Sep 2 22:47:56 dali kernel: PCI: Using ACPI for IRQ routing Sep 2 22:47:56 dali kernel: PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Sep 2 22:47:56 dali kernel: rivafb: nVidia device/chipset 10DE0110 Sep 2 22:47:56 dali kernel: rivafb: Detected CRTC controller 0 being used Sep 2 22:47:56 dali kernel: rivafb: RIVA MTRR set to ON Sep 2 22:47:56 dali kernel: rivafb: PCI nVidia NV10 framebuffer ver 0.9.5b (nVidiaGeForce2-M, 32MB @ 0xD8000000) Sep 2 22:47:56 dali kernel: IA-32 Microcode Update Driver: v1.11 <[email protected]> Sep 2 22:47:56 dali kernel: ikconfig 0.5 with /proc/ikconfig Sep 2 22:47:56 dali kernel: Journalled Block Device driver loaded Sep 2 22:47:56 dali kernel: devfs: v1.22 (20021013) Richard Gooch ([email protected]) Sep 2 22:47:56 dali kernel: devfs: boot_options: 0x1 Sep 2 22:47:56 dali kernel: udf: registering filesystem Sep 2 22:47:56 dali kernel: Activating ISA DMA hang workarounds. Sep 2 22:47:56 dali kernel: ACPI: Power Button (FF) [PWRF] Sep 2 22:47:56 dali kernel: ACPI: Sleep Button (CM) [SLPB] Sep 2 22:47:56 dali kernel: ACPI: Processor [CPU0] (supports C1 C2, 2 throttling states) Sep 2 22:47:56 dali kernel: PM: Adding info for No Bus:pnp1 Sep 2 22:47:56 dali kernel: isapnp: Scanning for PnP cards... Sep 2 22:47:56 dali kernel: isapnp: No Plug & Play device found Sep 2 22:47:56 dali kernel: Real Time Clock Driver v1.11a Sep 2 22:47:56 dali kernel: Non-volatile memory driver v1.2 Sep 2 22:47:56 dali kernel: Linux agpgart interface v0.100 (c) Dave Jones Sep 2 22:47:56 dali kernel: Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled Sep 2 22:47:56 dali kernel: parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] Sep 2 22:47:56 dali kernel: parport0: irq 7 detected Sep 2 22:47:56 dali kernel: parport0: cpp_daisy: aa5500ff(38) Sep 2 22:47:56 dali kernel: parport0: assign_addrs: aa5500ff(38) Sep 2 22:47:56 dali kernel: parport0: cpp_daisy: aa5500ff(38) Sep 2 22:47:56 dali kernel: parport0: assign_addrs: aa5500ff(38) Sep 2 22:47:56 dali kernel: Floppy drive(s): fd0 is 1.44M Sep 2 22:47:56 dali kernel: FDC 0 is a post-1991 82077 Sep 2 22:47:56 dali kernel: PM: Adding info for platform:floppy0 Sep 2 22:47:56 dali kernel: Intel(R) PRO/100 Network Driver - version 2.3.18-k1 Sep 2 22:47:56 dali kernel: Copyright (c) 2003 Intel Corporation Sep 2 22:47:56 dali kernel: Sep 2 22:47:56 dali kernel: e100: selftest OK. Sep 2 22:47:56 dali kernel: e100: eth0: Intel(R) PRO/100 Network Connection Sep 2 22:47:56 dali kernel: Sep 2 22:47:56 dali kernel: Linux video capture interface: v1.00 Sep 2 22:47:56 dali kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Sep 2 22:47:56 dali kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Sep 2 22:47:56 dali kernel: VP_IDE: IDE controller at PCI slot 0000:00:07.1 Sep 2 22:47:56 dali kernel: VP_IDE: chipset revision 16 Sep 2 22:47:56 dali kernel: VP_IDE: not 100%% native mode: will probe irqs later Sep 2 22:47:56 dali kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Sep 2 22:47:56 dali kernel: VP_IDE: VIA vt82c596b (rev 23) IDE UDMA66 controller on pci0000:00:07.1 Sep 2 22:47:56 dali kernel: ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:DMA Sep 2 22:47:56 dali kernel: ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA Sep 2 22:47:56 dali kernel: PM: Adding info for No Bus:ide0 Sep 2 22:47:56 dali kernel: PM: Adding info for ide:0.0 Sep 2 22:47:56 dali kernel: PM: Adding info for ide:0.1 Sep 2 22:47:56 dali kernel: PM: Adding info for No Bus:ide1 Sep 2 22:47:56 dali kernel: PM: Adding info for ide:1.0 Sep 2 22:47:56 dali kernel: PM: Adding info for ide:1.1 Sep 2 22:47:56 dali kernel: hda: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(66) Sep 2 22:47:56 dali kernel: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 Sep 2 22:47:56 dali kernel: hdb: Host Protected Area detected. Sep 2 22:47:56 dali kernel: hdb: 156250000 sectors (80000 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(66) Sep 2 22:47:56 dali kernel: /dev/ide/host0/bus0/target1/lun0: p1 p2 p3 p4 < p5 p6 p7 > Sep 2 22:47:56 dali kernel: Uniform CD-ROM driver Revision: 3.12 Sep 2 22:47:56 dali kernel: drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 Sep 2 22:47:56 dali kernel: uhci-hcd 0000:00:07.2: UHCI Host Controller Sep 2 22:47:56 dali kernel: uhci-hcd 0000:00:07.2: irq 10, io base 0000d400 Sep 2 22:47:56 dali kernel: uhci-hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 Sep 2 22:47:56 dali kernel: PM: Adding info for usb:usb1 Sep 2 22:47:56 dali kernel: hub 1-0:0: USB hub found Sep 2 22:47:56 dali kernel: hub 1-0:0: 2 ports detected Sep 2 22:47:56 dali kernel: PM: Adding info for usb:1-0:0 Sep 2 22:47:56 dali kernel: drivers/usb/core/usb.c: registered new driver usblp Sep 2 22:47:56 dali kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Sep 2 22:47:56 dali kernel: Initializing USB Mass Storage driver... Sep 2 22:47:56 dali kernel: drivers/usb/core/usb.c: registered new driver usb-storage Sep 2 22:47:56 dali kernel: USB Mass Storage support registered. Sep 2 22:47:56 dali kernel: drivers/usb/core/usb.c: registered new driver hiddev Sep 2 22:47:56 dali kernel: drivers/usb/core/usb.c: registered new driver hid Sep 2 22:47:56 dali kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver Sep 2 22:47:56 dali kernel: drivers/usb/core/usb.c: registered new driver usbscanner Sep 2 22:47:56 dali kernel: drivers/usb/image/scanner.c: 0.4.14:USB Scanner Driver Sep 2 22:47:56 dali kernel: mice: PS/2 mouse device common for all mice Sep 2 22:47:56 dali kernel: serio: i8042 AUX port at 0x60,0x64 irq 12 Sep 2 22:47:56 dali kernel: input: AT Set 2 keyboard on isa0060/serio0 Sep 2 22:47:56 dali kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 Sep 2 22:47:56 dali kernel: I2O Core - (C) Copyright 1999 Red Hat Software Sep 2 22:47:56 dali kernel: I2O: Event thread created as pid 12 Sep 2 22:47:56 dali kernel: i2o: Checking for PCI I2O controllers... Sep 2 22:47:56 dali kernel: I2O configuration manager v 0.04. Sep 2 22:47:56 dali kernel: (C) Copyright 1999 Red Hat Software Sep 2 22:47:56 dali kernel: I2O Block Storage OSM v0.9 Sep 2 22:47:56 dali kernel: (c) Copyright 1999-2001 Red Hat Software. Sep 2 22:47:56 dali kernel: i2o_block: Checking for Boot device... Sep 2 22:47:56 dali kernel: i2o_block: Checking for I2O Block devices... Sep 2 22:47:56 dali kernel: i2c /dev entries driver module version 2.7.0 (20021208) Sep 2 22:47:56 dali kernel: Advanced Linux Sound Architecture Driver Version 0.9.6 (Wed Aug 20 20:27:13 2003 UTC). Sep 2 22:47:56 dali kernel: request_module: failed /sbin/modprobe -- snd-card-0. error = -16 Sep 2 22:47:56 dali kernel: ALSA device list: Sep 2 22:47:56 dali kernel: #0: Sound Blaster Live! (rev.10) at 0xdc00, irq 5 Sep 2 22:47:56 dali kernel: NET4: Linux TCP/IP 1.0 for NET4.0 Sep 2 22:47:56 dali kernel: IP: routing cache hash table of 8192 buckets, 64Kbytes Sep 2 22:47:56 dali kernel: TCP: Hash tables configured (established 262144 bind 65536) Sep 2 22:47:56 dali kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Sep 2 22:47:56 dali kernel: BIOS EDD facility v0.09 2003-Jan-22, 2 devices found Sep 2 22:47:56 dali kernel: ACPI: (supports S0 S1 S4 S4bios S5) Sep 2 22:47:56 dali kernel: hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x301 Sep 2 22:47:56 dali kernel: EXT3-fs: INFO: recovery required on readonly filesystem. Sep 2 22:47:56 dali kernel: EXT3-fs: write access will be enabled during recovery. Sep 2 22:47:56 dali kernel: kjournald starting. Commit interval 5 seconds Sep 2 22:47:56 dali kernel: EXT3-fs: recovery complete. Sep 2 22:47:56 dali kernel: EXT3-fs: mounted filesystem with ordered data mode. Sep 2 22:47:56 dali kernel: Mounted devfs on /dev Sep 2 22:47:56 dali kernel: Freeing unused kernel memory: 188k freed Sep 2 22:47:56 dali kernel: hub 1-0:0: new USB device on port 1, assigned address 2 Sep 2 22:47:56 dali kernel: PM: Adding info for usb:1-1 Sep 2 22:47:56 dali kernel: input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse� Optical] on usb-0000:00:07.2-1 Sep 2 22:47:56 dali kernel: PM: Adding info for usb:1-1:0 Sep 2 22:47:56 dali kernel: hub 1-0:0: debounce: port 2: delay 100ms stable 4 status 0x101 Sep 2 22:47:56 dali kernel: hub 1-0:0: new USB device on port 2, assigned address 3 Sep 2 22:47:56 dali kernel: PM: Adding info for usb:1-2 Sep 2 22:47:56 dali kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 1 proto 2 vid 0x03F0 pid 0x3002 Sep 2 22:47:56 dali kernel: PM: Adding info for usb:1-2:0 Sep 2 22:47:56 dali kernel: EXT3 FS on hdb1, internal journal Sep 2 22:47:56 dali kernel: Adding 2096472k swap on /dev/hdb2. Priority:-1 extents:1 Sep 2 22:47:56 dali kernel: kjournald starting. Commit interval 5 seconds Sep 2 22:47:56 dali kernel: EXT3 FS on hdb3, internal journal Sep 2 22:47:56 dali kernel: EXT3-fs: mounted filesystem with ordered data mode. Sep 2 22:47:56 dali kernel: kjournald starting. Commit interval 5 seconds Sep 2 22:47:56 dali kernel: EXT3 FS on hdb7, internal journal Sep 2 22:47:56 dali kernel: EXT3-fs: mounted filesystem with ordered data mode. Sep 2 22:47:56 dali kernel: kjournald starting. Commit interval 5 seconds Sep 2 22:47:56 dali kernel: EXT3 FS on hdb5, internal journal Sep 2 22:47:56 dali kernel: EXT3-fs: mounted filesystem with ordered data mode. Sep 2 22:47:56 dali kernel: kjournald starting. Commit interval 5 seconds Sep 2 22:47:56 dali kernel: EXT3 FS on hdb6, internal journal Sep 2 22:47:56 dali kernel: EXT3-fs: mounted filesystem with ordered data mode. Sep 2 22:47:56 dali kernel: bttv: driver version 0.9.11 loaded Sep 2 22:47:56 dali kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture Sep 2 22:47:56 dali kernel: bttv: Host bridge is 0000:00:00.0 Sep 2 22:47:56 dali kernel: bttv: Host bridge is 0000:00:07.3 Sep 2 22:47:56 dali kernel: bttv: Bt8xx card found (0). Sep 2 22:47:56 dali kernel: bttv0: Bt878 (rev 17) at 0000:00:0b.0, irq: 10, latency: 64, mmio: 0xe5101000 Sep 2 22:47:56 dali kernel: bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012 Sep 2 22:47:56 dali kernel: bttv0: using: BT878(Pinnacle PCTV Studio/Ra) [card=39,autodetected] Sep 2 22:47:56 dali kernel: PM: Adding info for No Bus:i2c-0 Sep 2 22:47:56 dali kernel: bttv0: i2c: checking for MSP34xx @ 0x80... not found Sep 2 22:47:56 dali kernel: bttv0: miro: id=3 tuner=2 radio=no stereo=no Sep 2 22:47:56 dali kernel: bttv0: i2c: checking for MSP34xx @ 0x80... not found Sep 2 22:47:56 dali kernel: bttv0: i2c: checking for TDA9875 @ 0xb0... not found Sep 2 22:47:56 dali kernel: bttv0: i2c: checking for TDA7432 @ 0x8a... not found Sep 2 22:47:56 dali kernel: bttv0: registered device video0 Sep 2 22:47:56 dali kernel: bttv0: registered device vbi0 Sep 2 22:47:56 dali kernel: bttv0: PLL: 28636363 => 35468950 .. ok Sep 2 22:47:56 dali kernel: loop: loaded (max 8 devices) Sep 2 22:47:56 dali kernel: btaudio: driver version 0.7 loaded [digital+analog] Sep 2 22:47:56 dali kernel: btaudio: Bt878 (rev 17) at 00:0b.1, irq: 10, latency: 64, mmio: 0xe5102000 Sep 2 22:47:56 dali kernel: btaudio: registered device dsp1 [digital] Sep 2 22:47:56 dali kernel: btaudio: registered device dsp2 [analog] Sep 2 22:47:56 dali kernel: btaudio: registered device mixer1 Sep 2 22:47:56 dali kernel: apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) Sep 2 22:47:56 dali kernel: apm: overridden by ACPI. Sep 2 22:47:56 dali kernel: NTFS driver 2.1.4 [Flags: R/O MODULE]. Sep 2 22:47:56 dali kernel: nbd: registered device at major 43 Sep 2 22:47:56 dali kernel: PM: Adding info for No Bus:i2c-1 Sep 2 22:47:56 dali kernel: PM: Adding info for i2c:0-0060 Sep 2 22:47:56 dali kernel: Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky Sep 2 22:47:56 dali kernel: pwc Philips PCA645/646 + PCVC675/680/690 + PCVC730/740/750 webcam module version 8.11 loaded. Sep 2 22:47:56 dali kernel: pwc Also supports the Askey VC010, various Logitech QuickCams, Samsung MPC-C10 and MPC-C30, Sep 2 22:47:56 dali kernel: pwc the Creative WebCam 5, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100. Sep 2 22:47:56 dali kernel: drivers/usb/core/usb.c: registered new driver Philips webcam Sep 2 22:47:56 dali kernel: drivers/usb/media/se401.c: SE401 usb camera driver version 0.24 registering Sep 2 22:47:56 dali kernel: drivers/usb/core/usb.c: registered new driver se401 Sep 2 22:47:56 dali kernel: drivers/usb/core/usb.c: registered new driver ov511 Sep 2 22:47:56 dali kernel: drivers/usb/media/ov511.c: v1.64 for Linux 2.5 : ov511 USB Camera Driver Sep 2 22:47:56 dali kernel: drivers/usb/core/usb.c: registered new driver rio500 Sep 2 22:47:56 dali kernel: drivers/usb/misc/rio500.c: v1.1:USB Rio 500 driver Sep 2 22:47:56 dali kernel: drivers/usb/core/usb.c: registered new driver uss720 Sep 2 22:47:56 dali kernel: drivers/usb/misc/uss720.c: v0.5:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip Sep 2 22:47:56 dali kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic Sep 2 22:47:56 dali kernel: drivers/usb/core/usb.c: registered new driver usbserial Sep 2 22:47:56 dali kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 Sep 2 22:47:56 dali kernel: drivers/usb/core/usb.c: registered new driver microtekX6 Sep 2 22:47:56 dali kernel: drivers/usb/core/usb.c: registered new driver hpusbscsi Sep 2 22:47:56 dali kernel: NTFS volume version 3.0. Sep 2 22:48:05 dali kernel: microcode: CPU0 already at revision 1 (current=1) Sep 2 22:48:05 dali kernel: microcode: freed 2048 bytes Sep 2 23:31:15 dali kernel: bttv0: PLL can sleep, using XTAL (28636363). Sep 2 23:34:33 dali kernel: bttv0: PLL: 28636363 => 35468950 .. ok Sep 2 23:34:33 dali kernel: bttv0: PLL can sleep, using XTAL (28636363). Sep 2 22:47:56 dali kernel: Linux version 2.6.0-test4 ([email protected]) (gcc version 3.3.1 (Mandrake Linux 9.2 3.3.1-0.7mdk)) #2 Tue Sep 2 19:55:57 CDT 2003 Sep 2 22:47:56 dali kernel: Video mode to be used for restore is f00 Sep 2 22:47:56 dali kernel: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) Sep 2 22:47:56 dali kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Sep 2 22:47:56 dali kernel: BIOS-e820: 0000000000100000 - 0000000037ff0000 (usable) Sep 2 22:47:56 dali kernel: BIOS-e820: 0000000037ff0000 - 0000000037ff3000 (ACPI NVS) Sep 2 22:47:56 dali kernel: BIOS-e820: 0000000037ff3000 - 0000000038000000 (ACPI data) Sep 2 22:47:56 dali kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Sep 2 22:47:56 dali kernel: On node 0 totalpages: 229360 Sep 2 22:47:56 dali kernel: DMA zone: 4096 pages, LIFO batch:1 Sep 2 22:47:56 dali kernel: Normal zone: 225264 pages, LIFO batch:16 Sep 2 22:47:56 dali kernel: HighMem zone: 0 pages, LIFO batch:1 Sep 2 22:47:56 dali kernel: ACPI: MADT not present Sep 2 22:47:56 dali kernel: Building zonelist for node : 0 Sep 2 22:47:56 dali kernel: Kernel command line: BOOT_IMAGE=new_linux ro root=341 devfs=mount video=rivafb:1024x768-24@100 -s Sep 2 22:47:56 dali kernel: Local APIC disabled by BIOS -- reenabling. Sep 2 22:47:56 dali kernel: Found and enabled local APIC! Sep 2 22:47:56 dali kernel: PID hash table entries: 4096 (order 12: 32768 bytes) Sep 2 22:47:56 dali kernel: Detected 997.828 MHz processor. Sep 2 22:47:56 dali kernel: Console: colour VGA+ 80x25 Sep 2 22:47:56 dali kernel: Calibrating delay loop... 1970.17 BogoMIPS Sep 2 22:47:56 dali kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Sep 2 22:47:56 dali kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Sep 2 22:47:56 dali kernel: CPU: Intel Pentium III (Coppermine) stepping 0a Sep 2 22:47:56 dali kernel: POSIX conformance testing by UNIFIX Sep 2 22:47:56 dali kernel: enabled ExtINT on CPU#0 Sep 2 22:47:56 dali kernel: ESR value before enabling vector: 00000000 Sep 2 22:47:56 dali kernel: ESR value after enabling vector: 00000000 Sep 2 22:47:56 dali kernel: Using local APIC timer interrupts. Sep 2 22:47:56 dali kernel: calibrating APIC timer ... Sep 2 22:47:56 dali kernel: ..... CPU clock speed is 997.0327 MHz. Sep 2 22:47:56 dali kernel: ..... host bus clock speed is 132.0976 MHz. Sep 2 22:47:56 dali kernel: Initializing RT netlink socket Sep 2 22:47:56 dali kernel: BIO: pool of 256 setup, 14Kb (56 bytes/bio) Sep 2 22:47:56 dali kernel: biovec pool[0]: 1 bvecs: 256 entries (12 bytes) Sep 2 22:47:56 dali kernel: biovec pool[1]: 4 bvecs: 256 entries (48 bytes) Sep 2 22:47:56 dali kernel: biovec pool[2]: 16 bvecs: 256 entries (192 bytes) Sep 2 22:47:56 dali kernel: biovec pool[3]: 64 bvecs: 256 entries (768 bytes) Sep 2 22:47:56 dali kernel: biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) Sep 2 22:47:56 dali kernel: biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) Sep 2 22:47:56 dali kernel: PCI: Probing PCI hardware (bus 00) Sep 2 22:47:56 dali kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) Sep 2 22:47:56 dali kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 *12 14 15) Sep 2 22:47:56 dali kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) Sep 2 22:47:56 dali kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) Sep 2 22:47:56 dali kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 Sep 2 22:47:56 dali kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 Sep 2 22:47:56 dali kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 Sep 2 22:47:56 dali kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 Sep 2 22:47:56 dali kernel: pty: 256 Unix98 ptys configured Sep 2 22:47:56 dali kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Sep 2 22:47:56 dali kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Sep 2 22:47:56 dali kernel: Using anticipatory scheduling elevator Sep 2 22:47:56 dali kernel: hda: WDC WD600BB-32BSA0, ATA DISK drive Sep 2 22:47:56 dali kernel: hdb: WDC WD800BB-75CAA0, ATA DISK drive Sep 2 22:47:56 dali kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Sep 2 22:47:56 dali kernel: hdc: SAMSUNG CD-R/RW SW-216B Q001 20010913, ATAPI CD/DVD-ROM drive Sep 2 22:47:56 dali kernel: hdd: DVD-ROM DDU1621, ATAPI CD/DVD-ROM drive Sep 2 22:47:56 dali kernel: ide1 at 0x170-0x177,0x376 on irq 15 Sep 2 22:47:56 dali kernel: hda: max request size: 128KiB Sep 2 22:47:56 dali kernel: hdb: max request size: 128KiB Sep 2 22:47:56 dali kernel: ^Icurrent capacity is 156250000 sectors (80000 MB) Sep 2 22:47:56 dali kernel: ^Inative capacity is 156301488 sectors (80026 MB) Sep 2 22:47:56 dali kernel: hdc: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, DMA Sep 2 22:47:56 dali kernel: end_request: I/O error, dev hdd, sector 0 Sep 2 22:47:56 dali kernel: hdd: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33) Sep 2 22:47:56 dali kernel: VFS: Mounted root (ext3 filesystem) readonly. Sep 2 22:47:56 dali kernel: bttv0: using tuner=2 Sep 2 22:47:56 dali kernel: videodev: "BT878(Pinnacle PCTV Studio/Ra)" has no release callback. Please fix your driver for proper sysfs support, see http://lwn.net/Articles/36850/ Sep 2 22:47:56 dali kernel: videodev: "bt848/878 vbi" has no release callback. Please fix your driver for proper sysfs support, see http://lwn.net/Articles/36850/ Sep 2 22:47:56 dali kernel: btaudio: using card config "default" Sep 2 22:47:56 dali kernel: tuner: chip found @ 0xc0 Sep 2 22:47:56 dali kernel: tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) Sep 2 22:47:56 dali kernel: registering 0-0060 Sep 2 22:50:26 dali kernel: process `named' is using obsolete setsockopt SO_BSDCOMPAT Sep 2 22:50:26 dali last message repeated 5 times Sep 2 22:50:31 dali kernel: smbfs: Unrecognized mount option noexec Sep 2 22:51:16 dali last message repeated 2 times
Quoted 7 lines · watermodem
4) Problems include:
The USB and CUPs problem that I see the USB tree under
"/sys/bus/usb" where-as under/proc/bus/usbI see nothing. This may break a lot of existing code such as CUPS Is is suppose to be this way? This means USB printer is not seen by the environment but seen on boot.
For why nothing is showing up in /proc/bus/usb and how to fix that, please see the Linux USB FAQ at http://www.linux-usb.org/
In short, they are two different things, and we have not removed the info that was in /proc/bus/usb/* (with the exception of the drivers file in there, but no one was using that...)
thanks,
greg k-h
Re: 2.6.0-test4 on to mpegs and DVB
In reply to watermodemOk...
So I switched to the following suggested utilities:
module-init-tools-0.9.13-0.2bor.src.rpm
hotplug-2003_08_05-0.1bor.src.rpm
initscripts-7.06-18mdk.1bor.src.rpm
then did a merge on modprobe.conf/rpmnew and added one little directory to the path in the sysinit file.
The printer is still hosed but I do see the usb tree under proc now.
Everything else needed excepting the BT848 card (i2 stuff and video) probed and loaded. So I insmoded the rest to continue testing.
Mandrake will need to get their SUPERMOUNT working for DVDs, CDs and floppy.
Now for some performance reports. I have a server, in the basement, with mp3s, mpegs and such being served via samba to the local net.
MP3's seemed to be ok but mpeg was awful. Now the local net is a 24 port switch that should be able to do 100mbits/full duplex (it does under 2.4). So, to see if it was networking at fault (I, also, had to switch to E100 as the eepro100 driver doesn't seem to work in 2.6), I played a local DVD. The DVD looked and sounded great, but, it was using 98% of the CPU! 2.4 never used that much. I am wondering if the timing in the dispatcher is a tad off for video or if the different timeslices that are generated are not able to resonate with video display/capture/frame frequencies. Should the timing for desktops tend to have some sort of natural resonance with motion video display critical timing? (lots of folks watch mpegs and dvi and dvd ...)
Re: 2.6.0-test4 on to mpegs and DVB
Quoted 3 lines · watermodem
The DVD looked and sounded great, but, it was using
98% of the CPU! 2.4 never used that much.
A kernel profile will be needed to diagnose this further. Please see Documentation/basic_profiling.txt
Also check that you have selected the correct IDE chipsets in configuration. And post your dmesg output, especially the IDE bits.
Re: 2.6.0-test4 on to mpegs and DVB
Quoted 10 lines · Andrew Morton
Quoted 1 line · watermodem
The DVD looked and sounded great, but, it was using 98% of the CPU! 2.4 never used that much.
A kernel profile will be needed to diagnose this further. Please see
Documentation/basic_profiling.txtAlso check that you have selected the correct IDE chipsets in configuration. And post your dmesg output, especially the IDE bits.
Full mesg attached with IDE stuff included.
Will try to do the profiling this weekend.
DVD app was XINE. I can provide the config files for it if it would be useful.
Also, included: lspci -v, cat /proc/ide/via, and cat settings (DVD)
*** it is interesting that it is identifying the wrong cable type for the secondary IDE (DVD/CD) as it most definitely is an 80 wire one.
lspci -v
00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev 44)
Subsystem: Giga-byte Technology VT82C691 Apollo Pro System
Controller
Flags: bus master, medium devsel, latency 16
Memory at e2000000 (32-bit, prefetchable) [size=32M]
Capabilities: [a0] AGP version 1.0
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: e0000000-e1ffffff
Prefetchable memory behind bridge: d8000000-dfffffff
Capabilities: [80] Power Management version 2
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Mobile South] (rev 23)
Subsystem: Giga-byte Technology VT82C596/A/B PCI to ISA Bridge
Flags: bus master, stepping, medium devsel, latency 0
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 10) (prog-if 8a [Master SecP PriP])
Flags: bus master, medium devsel, latency 64
I/O ports at d000 [size=16]
Capabilities: [c0] Power Management version 2
00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 11) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 64, IRQ 10
I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2
00:07.3 Host bridge: VIA Technologies, Inc. VT82C596 Power Management (rev 30)
Flags: medium devsel
00:09.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 02)
Subsystem: Intel Corp. EtherExpress PRO/100B (TX)
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at e5100000 (32-bit, prefetchable) [size=4K]
I/O ports at d800 [size=32]
Memory at e5000000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at e4000000 [disabled] [size=1M]00:0a.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 0a)
Subsystem: Creative Labs CT4780 SBLive! Value
Flags: bus master, medium devsel, latency 64, IRQ 5
I/O ports at dc00 [size=32]
Capabilities: [dc] Power Management version 1
00:0a.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 0a)
Subsystem: Creative Labs Gameport Joystick
Flags: bus master, medium devsel, latency 64
I/O ports at e000 [size=8]
Capabilities: [dc] Power Management version 1
00:0b.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
Subsystem: Pinnacle Systems Inc. PCTV pro (TV + FM stereo receiver)
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at e5101000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
00:0b.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
Subsystem: Pinnacle Systems Inc. PCTV pro (TV + FM stereo
receiver, audio section)
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at e5102000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev a1) (prog-if 00 [VGA])
Subsystem: ABIT Computer Corp.: Unknown device 6105
Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 11
Memory at e0000000 (32-bit, non-prefetchable) [size=16M]
Memory at d8000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 2.0
cat /proc/ide/via
----------VIA BusMastering IDE Configuration----------------
Driver Version: 3.37 South Bridge: VIA vt82c596b Revision: ISA 0x23 IDE 0x10 Highest DMA rate: UDMA66 BM-DMA base: 0xd000 PCI clock: 33.3MHz Master Read Cycle IRDY: 1ws Master Write Cycle IRDY: 1ws BM IDE Status Register Read Retry: yes Max DRDY Pulse Width: No limit -----------------------Primary IDE-------Secondary IDE------ Read DMA FIFO flush: yes yes End Sector FIFO flush: no no Prefetch Buffer: no no Post Write Buffer: no no Enabled: yes yes Simplex only: no no Cable Type: 80w 40w -------------------drive0----drive1----drive2----drive3----- Transfer Mode: UDMA UDMA DMA UDMA Address Setup: 30ns 30ns 30ns 30ns Cmd Active: 90ns 90ns 90ns 90ns Cmd Recovery: 30ns 30ns 30ns 30ns Data Active: 90ns 90ns 90ns 90ns Data Recovery: 30ns 30ns 30ns 30ns Cycle Time: 30ns 30ns 120ns 60ns Transfer Rate: 66.6MB/s 66.6MB/s 16.6MB/s 33.3MB/s
IDE drive3 is the DVD:
cat settings
name value min max mode ---- ----- --- --- ---- current_speed 66 0 70 rw dsc_overlap 1 0 1 rw ide-scsi 0 0 1 rw init_speed 12 0 70 rw io_32bit 1 0 3 rw keepsettings 0 0 1 rw nice1 1 0 1 rw number 3 0 3 rw pio_mode write-only 0 255 w slow 0 0 1 rw unmaskirq 1 0 1 rw using_dma 1 0 1 rw
Linux version 2.6.0-test4 ([email protected]) (gcc version 3.3.1 (Mandrake Linux 9.2 3.3.1-0.7mdk)) #2 Tue Sep 2 19:55:57 CDT 2003 Video mode to be used for restore is f00
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000037ff0000 (usable)
BIOS-e820: 0000000037ff0000 - 0000000037ff3000 (ACPI NVS)
BIOS-e820: 0000000037ff3000 - 0000000038000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
895MB LOWMEM available.
On node 0 totalpages: 229360
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225264 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI: RSDP (v000 GBT ) @ 0x000f6b60
ACPI: RSDT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x37ff3000
ACPI: FADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x37ff3040
ACPI: DSDT (v001 GBT AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: MADT not present
Building zonelist for node : 0
Kernel command line: BOOT_IMAGE=new_linux ro root=341 devfs=mount video=rivafb:1024x768-24@100 -s
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 997.705 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1970.17 BogoMIPS
Memory: 903208k/917440k available (2797k kernel code, 13452k reserved, 1085k data, 188k init, 0k highmem) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
-> /dev
-> /dev/console
-> /root
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium III (Coppermine) stepping 0a
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 997.0249 MHz.
..... host bus clock speed is 132.0966 MHz.
PM: Adding info for No Bus:legacy
Initializing RT netlink socket
PCI: PCI BIOS revision 2.10 entry at 0xfb380, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
BIO: pool of 256 setup, 14Kb (56 bytes/bio)
biovec pool[0]: 1 bvecs: 256 entries (12 bytes)
biovec pool[1]: 4 bvecs: 256 entries (48 bytes)
biovec pool[2]: 16 bvecs: 256 entries (192 bytes)
biovec pool[3]: 64 bvecs: 256 entries (768 bytes)
biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
ACPI: Subsystem revision 20030813
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PM: Adding info for No Bus:pci0000:00
PM: Adding info for pci:0000:00:00.0
PM: Adding info for pci:0000:00:01.0
PM: Adding info for pci:0000:00:07.0
PM: Adding info for pci:0000:00:07.1
PM: Adding info for pci:0000:00:07.2
PM: Adding info for pci:0000:00:07.3
PM: Adding info for pci:0000:00:09.0
PM: Adding info for pci:0000:00:0a.0
PM: Adding info for pci:0000:00:0a.1
PM: Adding info for pci:0000:00:0b.0
PM: Adding info for pci:0000:00:0b.1
PM: Adding info for pci:0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fc060
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc088, dseg 0xf0000
PM: Adding info for No Bus:pnp0
PM: Adding info for pnp:00:00
PM: Adding info for pnp:00:01
PM: Adding info for pnp:00:02
PM: Adding info for pnp:00:03
PM: Adding info for pnp:00:04
PM: Adding info for pnp:00:05
PM: Adding info for pnp:00:06
PM: Adding info for pnp:00:07
PM: Adding info for pnp:00:08
PM: Adding info for pnp:00:09
PM: Adding info for pnp:00:0c
PM: Adding info for pnp:00:0d
PM: Adding info for pnp:00:0f
PM: Adding info for pnp:00:10
PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
SCSI subsystem initializeddrivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
rivafb: nVidia device/chipset 10DE0110
rivafb: Detected CRTC controller 0 being used
rivafb: RIVA MTRR set to ON
rivafb: PCI nVidia NV10 framebuffer ver 0.9.5b (nVidiaGeForce2-M, 32MB @ 0xD8000000)
pty: 256 Unix98 ptys configured
IA-32 Microcode Update Driver: v1.11 <[email protected]>
ikconfig 0.5 with /proc/ikconfig
Journalled Block Device driver loaded
devfs: v1.22 (20021013) Richard Gooch ([email protected])
devfs: boot_options: 0x1
udf: registering filesystem
Activating ISA DMA hang workarounds.
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU0] (supports C1 C2, 2 throttling states)
PM: Adding info for No Bus:pnp1
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.11a
Non-volatile memory driver v1.2
Linux agpgart interface v0.100 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
Using anticipatory scheduling elevator
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
PM: Adding info for platform:floppy0
Intel(R) PRO/100 Network Driver - version 2.3.18-k1
Copyright (c) 2003 Intel Corporation
e100: selftest OK.
e100: eth0: Intel(R) PRO/100 Network Connection
Linux video capture interface: v1.00
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xxVP_IDE: IDE controller at PCI slot 0000:00:07.1VP_IDE: chipset revision 16VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xxVP_IDE: VIA vt82c596b (rev 23) IDE UDMA66 controller on pci0000:00:07.1
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMAhda: WDC WD600BB-32BSA0, ATA DISK drive
PM: Adding info for No Bus:ide0
hdb: WDC WD800BB-75CAA0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
PM: Adding info for ide:0.0
PM: Adding info for ide:0.1
hdc: SAMSUNG CD-R/RW SW-216B Q001 20010913, ATAPI CD/DVD-ROM drive
PM: Adding info for No Bus:ide1
hdd: DVD-ROM DDU1621, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
PM: Adding info for ide:1.0
PM: Adding info for ide:1.1
hda: max request size: 128KiB
hda: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(66)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
hdb: max request size: 128KiB
hdb: Host Protected Area detected.
current capacity is 156250000 sectors (80000 MB) native capacity is 156301488 sectors (80026 MB)
hdb: 156250000 sectors (80000 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(66)
/dev/ide/host0/bus0/target1/lun0: p1 p2 p3 p4 < p5 p6 p7 >
hdc: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12end_request: I/O error, dev hdd, sector 0
hdd: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
uhci-hcd 0000:00:07.2: UHCI Host Controller
uhci-hcd 0000:00:07.2: irq 10, io base 0000d400
uhci-hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
PM: Adding info for usb:usb1
hub 1-0:0: USB hub found
hub 1-0:0: 2 ports detected
PM: Adding info for usb:1-0:0drivers/usb/core/usb.c: registered new driver usblpdrivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.drivers/usb/core/usb.c: registered new driver hiddevdrivers/usb/core/usb.c: registered new driver hiddrivers/usb/input/hid-core.c: v2.0:USB HID core driverdrivers/usb/core/usb.c: registered new driver usbscannerdrivers/usb/image/scanner.c: 0.4.14:USB Scanner Driver
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
I2O Core - (C) Copyright 1999 Red Hat Software
I2O: Event thread created as pid 12
i2o: Checking for PCI I2O controllers...
I2O configuration manager v 0.04.
(C) Copyright 1999 Red Hat Software
I2O Block Storage OSM v0.9
(c) Copyright 1999-2001 Red Hat Software.i2o_block: Checking for Boot device...i2o_block: Checking for I2O Block devices...
i2c /dev entries driver module version 2.7.0 (20021208)
Advanced Linux Sound Architecture Driver Version 0.9.6 (Wed Aug 20 20:27:13 2003 UTC).request_module: failed /sbin/modprobe -- snd-card-0. error = -16
ALSA device list:
#0: Sound Blaster Live! (rev.10) at 0xdc00, irq 5
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
BIOS EDD facility v0.09 2003-Jan-22, 2 devices found
ACPI: (supports S0 S1 S4 S4bios S5)
hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x301
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 188k freed
hub 1-0:0: new USB device on port 1, assigned address 2
PM: Adding info for usb:1-1
input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse� Optical] on usb-0000:00:07.2-1
PM: Adding info for usb:1-1:0
hub 1-0:0: debounce: port 2: delay 100ms stable 4 status 0x101
hub 1-0:0: new USB device on port 2, assigned address 3
PM: Adding info for usb:1-2drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 1 proto 2 vid 0x03F0 pid 0x3002
PM: Adding info for usb:1-2:0
EXT3 FS on hdb1, internal journal
Adding 2096472k swap on /dev/hdb2. Priority:-1 extents:1
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NTFS driver 2.1.4 [Flags: R/O MODULE].
NTFS-fs warning (device hda1): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future. NTFS volume version 3.0.
serio: kseriod exiting
exiting...exiting...<3>e100: eth0 NIC Link is Up 100 Mbps Full duplex
microcode: CPU0 already at revision 1 (current=1)
microcode: freed 2048 bytes
process `named' is using obsolete setsockopt SO_BSDCOMPAT
process `named' is using obsolete setsockopt SO_BSDCOMPAT
process `named' is using obsolete setsockopt SO_BSDCOMPAT
process `named' is using obsolete setsockopt SO_BSDCOMPAT
process `named' is using obsolete setsockopt SO_BSDCOMPAT
process `named' is using obsolete setsockopt SO_BSDCOMPAT
smbfs: Unrecognized mount option noexec
smbfs: Unrecognized mount option noexec
Re: 2.6.0-test4 on to mpegs and DVB
Quoted 3 lines
Quoted 3 lines
Quoted 2 lines
The DVD looked and sounded great, but, it was using 98% of the CPU! 2.4 never used that much.
Couldn't it be caused by the Xfree configuration? I see you have a Nvidia card. Have you compiled the Nvidia closed and fu*king module for a 2.6.0-test4 kernel (if it is available ¿?¿?) ?
Re: 2.6.0-test4 on to mpegs and DVB
Quoted 8 lines · tonildg
Quoted 4 lines
Quoted 4 lines
Quoted 2 lines
The DVD looked and sounded great, but, it was using 98% of the CPU! 2.4 never used that much.
Couldn't it be caused by the Xfree configuration? I see you have a Nvidia card. Have you compiled the Nvidia closed and fu*king module for a 2.6.0-test4 kernel (if it is available ¿?¿?) ?
Twice posted. The first time I replied to you in person.
The answer is NO!. Default X11 rivafb stuff.
If it was NVIDIA special stuff the kernel would say "TAINTED" on the insmod. It obviously dosen't! NOT TAINTED!
The only tainting on that card is replacing the default heatsink with a huge one, silver heatsink paste and a processor fan. It takes up 2 pci slots too but runs very cool. In fact, if you put your finger on the downside of the circuit board, you feel no heat. Try that on your card. It is an absolutely rock solid video card with XFree drivers and 3+ years of use.
Again, NOT TAINTED, GOOD HARDWARE, Opensource software, GPL. OK?