Skip to contentSkip to conversation

KConfig help text not shown in 2.6.0-test5

DISCUSSION Nick Piggin 2 participants 6 messages Sep 13, 2003 – Sep 15, 2003

lore
Share & tools
lore
#0 lore raw

In 2.6.0-test5, the help text for choice options (eg. processor type, highmem) is not shown in either menuconfig or oldconfig. It does work in gconfig, however. Don't know when it last worked.

#1 lore raw

Hi,

Quoted 3 lines · Nick Piggin

In 2.6.0-test5, the help text for choice options (eg. processor type, highmem) is not shown in either menuconfig or oldconfig. It does work in gconfig, however. Don't know when it last worked.

Try the patch below, the main help should be with the choice. This patch is only an example, someone else should verify the correct wording. BTW you can reach the individual help within 'make config' by appending a '?' to the number (e.g. '1?').

bye, Roman

arch/i386/Kconfig +13 -7
@@ -128,9 +128,6 @@ config ES7000_CLUSTERED_APIC
 choice
 	prompt "Processor family"
 	default M686
-
-config M386
-	bool "386"
 	---help---
 	  This is the processor type of your CPU. This information is used for
 	  optimizing purposes. In order to compile a kernel that can run on
@@ -166,6 +163,12 @@ config M386
 
 	  If you don't know what to do, choose "386".
 
+config M386
+	bool "386"
+	help
+	  Select this for a 386 series processor, either Intel or one of the
+	  compatible processors.
+
 config M486
 	bool "486"
 	help
@@ -643,9 +646,6 @@ config EDD
 choice
 	prompt "High Memory Support"
 	default NOHIGHMEM
-
-config NOHIGHMEM
-	bool "off"
 	---help---
 	  Linux can use up to 64 Gigabytes of physical memory on x86 systems.
 	  However, the address space of 32-bit x86 processors is only 4
@@ -678,7 +678,13 @@ config NOHIGHMEM
 	  your boot loader (lilo or loadlin) about how to pass options to the
 	  kernel at boot time.)
 
-	  If unsure, say "off".
+	  If unsure, select "off".
+
+
+config NOHIGHMEM
+	bool "off"
+	help
+	  Select this if you want turn off High Memory Support.
 
 config HIGHMEM4G
 	bool "4GB"
#2 lore raw
Quoted 5 lines · Roman Zippel

Hi,

On Sat, 13 Sep 2003, Nick Piggin wrote:

Quoted 8 lines
Quoted 4 lines

In 2.6.0-test5, the help text for choice options (eg. processor type, highmem) is not shown in either menuconfig or oldconfig. It does work in gconfig, however. Don't know when it last worked.

Try the patch below, the main help should be with the choice. This patch is only an example, someone else should verify the correct wording. BTW you can reach the individual help within 'make config' by appending a '?' to the number (e.g. '1?').

What I am seeing is the help text for the whole choice thingy is used as the help text for the individual choices. This patch doesn't fix that. How is it supposed to work? I assume you tried it and saw what it was doing, so am I just mistaken in how I think it should work?

#3 lore raw

Hi,

Quoted 7 lines · Nick Piggin
Quoted 2 lines

BTW you can reach the individual help within 'make config' by appending a '?' to the number (e.g. '1?').

What I am seeing is the help text for the whole choice thingy is used as the help text for the individual choices. This patch doesn't fix that. How is it supposed to work? I assume you tried it and saw what it was doing, so am I just mistaken in how I think it should work?

Yes, it works here, what exactly did you try?

bye, Roman

#4 lore raw
Quoted 7 lines · Roman Zippel

Hi,

Quoted 2 lines · Nick Piggin
Quoted 2 lines

BTW you can reach the individual help within 'make config' by appending a '?' to the number (e.g. '1?').

Quoted 8 lines
Quoted 5 lines

What I am seeing is the help text for the whole choice thingy is used as the help text for the individual choices. This patch doesn't fix that. How is it supposed to work? I assume you tried it and saw what it was doing, so am I just mistaken in how I think it should work?

Yes, it works here, what exactly did you try?

I got a clean 2.6.0-test5 kernel tree, applied your patch, ran make oldconfig menuconfig, entered "processor type and features", move over "processor family" and select help. That works fine. Enter "processor family" and select help for "Pentium-4" and the same help text comes up. I just thought you should see the individual help text for that item.

#5 lore raw

Hi,

Quoted 5 lines · Nick Piggin

I got a clean 2.6.0-test5 kernel tree, applied your patch, ran make oldconfig menuconfig, entered "processor type and features", move over "processor family" and select help. That works fine. Enter "processor family" and select help for "Pentium-4" and the same help text comes up. I just thought you should see the individual help text for that item.

I didn't mention menuconfig. :)
I got patches to fix this, but I haven't integrated them yet.

bye, Roman