Badness in as_remove_dispatched_request
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hello! This is my first try with the 2.6.0-test kernels and I get AMOUNTS of these warnings during boot-up on both test5 and test6 (this expecially is from test6):
Badness in as_remove_dispatched_request at drivers/block/as-iosched.c:1023
Call Trace: [<c01e0ef1>] as_remove_dispatched_request+0x71/0x100 [<c01d9b17>] elv_remove_request+0x27/0x40 [<c01e5974>] ide_end_request+0xf4/0x150 [<c01f4ae7>] ide_dma_intr+0x97/0xc0 [<c01e70ca>] ide_intr+0xea/0x190 [<c01f4a50>] ide_dma_intr+0x0/0xc0 [<c010b3aa>] handle_IRQ_event+0x3a/0x70 [<c010b731>] do_IRQ+0x91/0x130 [<c0105000>] rest_init+0x0/0x60 [<c0109b48>] common_interrupt+0x18/0x20 [<c0105000>] rest_init+0x0/0x60 [<c0106e93>] default_idle+0x23/0x30 [<c0106efc>] cpu_idle+0x2c/0x40 [<c02d670c>] start_kernel+0x14c/0x160 [<c02d6480>] unknown_bootoption+0x0/0x100
They are all the same. Otherwise the system *seems* to work fine, but I haven't tried much since I want to solve this. Maybe the problem is with my on-board hpt-372 disk controller (not in RAID configuration). If you need more info or my .config just ask.
- --
Move -- Proudly abusing Slackware 9.1.0 (pre)
Linux 2.4.22
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.2 (GNU/Linux)
iD8DBQE/fS+xtqlBbhAvpboRAvk4AJ9nySo+qgPWi2q9x4cJaqmeVS6kpQCeJ4du b12kg1IC6cj1lviyeXHojTg=
=r7Qt
-----END PGP SIGNATURE-----
Quoted 23 lines · Rodolfo Boer
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1Hello! This is my first try with the 2.6.0-test kernels and I get AMOUNTS of these warnings during boot-up on both test5 and test6 (this expecially is from test6):
Badness in
as_remove_dispatched_requestatdrivers/block/as-iosched.c:1023Call Trace: [<c01e0ef1>] as_remove_dispatched_request+0x71/0x100 [<c01d9b17>] elv_remove_request+0x27/0x40 [<c01e5974>] ide_end_request+0xf4/0x150 [<c01f4ae7>] ide_dma_intr+0x97/0xc0 [<c01e70ca>] ide_intr+0xea/0x190 [<c01f4a50>] ide_dma_intr+0x0/0xc0 [<c010b3aa>] handle_IRQ_event+0x3a/0x70 [<c010b731>] do_IRQ+0x91/0x130 [<c0105000>] rest_init+0x0/0x60 [<c0109b48>] common_interrupt+0x18/0x20 [<c0105000>] rest_init+0x0/0x60 [<c0106e93>] default_idle+0x23/0x30 [<c0106efc>] cpu_idle+0x2c/0x40 [<c02d670c>] start_kernel+0x14c/0x160 [<c02d6480>] unknown_bootoption+0x0/0x100
Quoted 2 lines
They are all the same. Otherwise the system *seems* to work fine, but I haven't tried much since I want to solve this. Maybe the problem is with my on-board hpt-372 disk controller (not in RAID configuration). If you need more info or my .config just ask.
Hi Rodolfo,
Linus just merged some AS fixes. Could you test the latest cset please?
http://www.kernel.org/pub/linux/kernel/v2.6/testing/cset/ (topmost link)
Thanks.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Alle 10:13, venerdì 3 ottobre 2003, Rodolfo Boer ha scritto:
Quoted 3 lines
Hello! This is my first try with the 2.6.0-test kernels and I get AMOUNTS of these warnings during boot-up on both test5 and test6 (this expecially is from test6):
I'm sorry, I forgot half the mail.
This happens with tagged command queing enabled, which should be supported by my Deskstar 180GXP.
- --
Move -- Proudly abusing Slackware 9.1.0 (pre)
Linux 2.4.22
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.2 (GNU/Linux)
iD8DBQE/fTkxtqlBbhAvpboRAmDPAJ9XfPNfAoyPYdyxJBd68muyvG1DOwCeN1Oj kaMbruRPNoHgBVxbpulwgls=
=zIX9
-----END PGP SIGNATURE-----
Quoted 5 lines · Rodolfo Boer
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1Alle 10:13, venerdì 3 ottobre 2003, Rodolfo Boer ha scritto:
Quoted 8 lines
Quoted 4 lines
Hello! This is my first try with the 2.6.0-test kernels and I get AMOUNTS of these warnings during boot-up on both test5 and test6 (this expecially is from test6):
I'm sorry, I forgot half the mail.
This happens with tagged command queing enabled, which should be supported by my Deskstar 180GXP.
Well, give the latest cset a try anyway, and let me know what you get. I think TCQ for IDE is not very stable at the moment.