EIO DM-8401H ATA133 IDE Controller Card ( Silicon Image Chip ?!?)
Interestingly, EXACTLY the same thing happened to me. I actually bought a vanilla IDE controller for a spare disk, and in what showed up the documentation claimed it was a DM-8401R, but lspci shows what you see: and IT8212.
The answer was to get the good stuff from here:
http://www.iteusa.com/productInfo/Download.html#IT8212%20ATA133%20Controller
The driver install was a doddle (well documented, and easy to apply Mandrake 9.1 instructions to 9.2). For heavens sake: these guys even provide the specs online. And the driver seems to work, though I am not stressing it.
Thanks, Shaheed
Quoted 7 lines · Shaheed
Interestingly, EXACTLY the same thing happened to me. I actually bought a vanilla IDE controller for a spare disk, and in what showed up the documentation claimed it was a DM-8401R, but lspci shows what you see: and IT8212.
The answer was to get the good stuff from here:
http://www.iteusa.com/productInfo/Download.html#IT8212%20ATA133%20Controller
The driver install was a doddle (well documented, and easy to apply Mandrake 9.1 instructions to 9.2). For heavens sake: these guys even provide the specs online. And the driver seems to work, though I am not stressing it.
Neat. Even though it's a SCSI driver, it's very definitely a standard IDE controller, which should be easy for Bart or somebody to add to drivers/ide ...
Jeff
Quoted 11 lines · Jeff Garzik
Quoted 10 lines · Shaheed
Interestingly, EXACTLY the same thing happened to me. I actually bought a vanilla IDE controller for a spare disk, and in what showed up the documentation claimed it was a DM-8401R, but lspci shows what you see:
and IT8212.The answer was to get the good stuff from here:
http://www.iteusa.com/productInfo/Download.html#IT8212%20ATA133%20Control
ler
Quoted 8 lines
Quoted 4 lines
The driver install was a doddle (well documented, and easy to apply Mandrake 9.1 instructions to 9.2). For heavens sake: these guys even provide the specs online. And the driver seems to work, though I am not stressing it.
Neat. Even though it's a SCSI driver, it's very definitely a standard IDE controller, which should be easy for Bart or somebody to add to
drivers/ide...
I even have one such controller,
I just need to find some time and spare drives...
--bartlomiej
ITE IT8212 (was Re: WG: EIO DM-8401H ATA133 IDE Controller Card ( Silicon Image Chip ?!?))
In reply to Jeff GarzikQuoted 11 lines · Jeff Garzik
Quoted 10 lines · Shaheed
Interestingly, EXACTLY the same thing happened to me. I actually bought a vanilla IDE controller for a spare disk, and in what showed up the documentation claimed it was a DM-8401R, but lspci shows what you see:
and IT8212.The answer was to get the good stuff from here:
http://www.iteusa.com/productInfo/Download.html#IT8212%20ATA133%20Control
ler
Quoted 8 lines
Quoted 4 lines
The driver install was a doddle (well documented, and easy to apply Mandrake 9.1 instructions to 9.2). For heavens sake: these guys even provide the specs online. And the driver seems to work, though I am not stressing it.
Neat. Even though it's a SCSI driver, it's very definitely a standard IDE controller, which should be easy for Bart or somebody to add to
drivers/ide...
Are you sure about this? I know the driver uses the discs as a standard IDE controller, but then it can deliberately put the chip into a bypass mode.
According to the blurb it is "Different from using traditional software to handle the RAID function, IT8212F features one embedded CPU and firmware to handle it. The methodology is able to improve the system's stability and reduce the driver's loading". The block diagram shows an embeded CPU. It is also possible, depending on the firmware it is programmed with to make it a RAID or ATAPI controller.
http://www.ite.com.tw/pc/brief_it8212f.htm
It's the IT8211 that is the simple IDE controller.
http://www.ite.com.tw/pc/brief_it8211f.htm
Anyway, now I've said that, any more news on it's support? I'd be very interested in trying out any code that may be being developed, especially if it will work with x86-64 in long mode. The current driver from ITE definitely and unsurprisingly does not.
Signature · 1 line
Ian.