Skip to contentSkip to conversation

nforce2 stability on 2.6.0-test5 and 2.6.0-test9

DISCUSSION Justin Ossevoort 1 participant 1 message Nov 5, 2003

lore
Share & tools
lore
#0 lore raw

Hello,

I've got an A7N8X mobo, and the same problems. 'noapic' makes the system run much better. You also have a big interrupt count on int21. Mine is going beserk. Top shows that almost 30% of my cpu is being used up on hi (Hardware Interrupts I guess).
Watching /proc/interrupts reveals I get tens of thousands of interrupts on 21 every second, disabling usb or the soundcard doesn't help, disabling both does help. Is interrupt 21 doing something funny?

Regards,

       justin....

[email protected] wrote in message news:<[email protected]>...

Quoted 15 lines

**** /proc/interrupts ****

CPU0

  0:   77764351          XT-PIC  timer
  1:      35127    IO-APIC-edge  i8042
  2:          0          XT-PIC  cascade
  8:          1    IO-APIC-edge  rtc
  9:          0   IO-APIC-level  acpi
 12:     146812    IO-APIC-edge  i8042
 14:     105553    IO-APIC-edge  ide0
 15:       1371    IO-APIC-edge  ide1
 19:    5329271   IO-APIC-level  nvidia
 21:   12326898   IO-APIC-level  NVidia nForce2, eth0
NMI:          0 LOC:   77761842 ERR:          0
MIS:          4