Skip to contentSkip to conversation

Exception on host-PCI-bridge master-abort

DISCUSSION [email protected] 1 participant 1 message Nov 7, 2003

lore
Share & tools
lore
#0 lore raw

Items: custom PCI card, master-abort on host-PCI bridge, i386 PC, kernel 2.4.18

Hi,
I'm developing i386 linux drivers for a custom PCI card basically built on
a programmable FPGA.

Every time I re-program the FPGA (without re-booting the PC), the PCI configuration regs of the card are resetted, which makes memory and I/O aperture of the card disappearing from the PCI bus.

By calling pci_restore_state() I restore the proper configuration, but unfortunately sometimes I'm not fast enough, and the PC issues a read or write requests when the card is still wrong configured.
In such bad situation the PC freezes!

Quoted 1 line

From the PCI spec, if a card does not respond, after a small timeout a

master-abort situation will accour.

It will be desiderable having, e.g. a CPU exception when the host-PCI bridge fails with a master-abort.
By putting a pci_restore_state() call in the exception handler I could solve the problem.

Digging in the kernel code I didn't found a way for doing that. No PCI bridge for PC seems having such a feature. Isn't it?

Using a ARM Integrator platform instead of a PC, the solution seems easy. The V3 PCI controller is programmed to rise an exception when a master-abort accurs (v3_fault() in arch/arm/mach-integrator/pci_v3.c).

Please could you suggest me a way for getting this exception on PC?

Currently I'm using a PC with SIS620 chipset, but if you know solutions related with different chipsets, I'm ready to change MB.

Regards
Antonio Borneo
[email protected]

__________________________________________________________________
Tiscali ADSL SENZA CANONE, paghi solo quello che consumi! Navighi a 1,5 euro all'ora e il modem e' gratis! Abbonati subito.
http://point.tiscali.it/Adsl/prodotti/senzacanone/