no console switching
Hello,
I am trying to implement a framebuffer device without console support. I want to display only graphics, no text at all.
Is there a way to avoid the console take over?
I don't have the actuall graphics device yet, so I have created an initial version of the driver looking a lot like the vfb device. I set the dispsw variable of the display structure to fbcon_dummy.
When I load the module I see this:
fbcon_setup: No support for fontwidth 8fbcon_setup: type 0 (aux 0, depth 8) not supported
Console: switching to colour frame buffer device 80x30
fb0: Teralogic 751 frame buffer device
The module count increases to 63 and I cannot unload the module.
Also, what do I have to put to the owner variable of the fb_ops structure? The above happens with this variable se to THIS_MODULE.
If I comment this line causing the owner variable to be undefined, the module count does not increase and the module can be unloaded. But It seems that the device is NOT unregistered. When I load the module again, I see this:
fb1: Teralogic 751 frame buffer device
the fb0 is somewhere still defined, and when I try to access it, a page fault occurs. Is it wrong to leave the owner variable undefined?
--
Manousaridis Angelos
-------------------------------------------------------
This SF.Net email sponsored by: ApacheCon 2003, 16-19 November in Las Vegas. Learn firsthand the latest developments in Apache, PHP, Perl, XML, Java, MySQL, WebDAV, and more! http://www.apachecon.com/
Quoted 4 lines · Manousaridis Angelos
I am trying to implement a framebuffer device without console support. I want to display only graphics, no text at all.
Is there a way to avoid the console take over?
Disable CONFIG_VT_CONSOLE.
Quoted 7 lines
I don't have the actuall graphics device yet, so I have created an initial version of the driver looking a lot like the vfb device. I set the dispsw variable of the display structure to
fbcon_dummy. When I load the module I see this:
fbcon_setup: No support for fontwidth 8fbcon_setup: type 0 (aux 0, depth 8) not supported
That's harmless, and caused by fbcon_dummy.
Quoted 4 lines
Console: switching to colour frame buffer device 80x30
fb0: Teralogic 751 frame buffer deviceThe module count increases to 63 and I cannot unload the module.
Because the virtual console subsystem uses 63 virtual consoles by default, and increases the module counter for each of them.
Quoted 2 lines
Also, what do I have to put to the owner variable of the
fb_opsstructure? The above happens with this variable se toTHIS_MODULE.
That's OK.
Quoted 3 lines
If I comment this line causing the owner variable to be undefined, the module count does not increase and the module can be unloaded. But It seems that the device is NOT unregistered. When I load the module
Your module_cleanup() routine must unregister your fb_info.
Quoted 6 lines
again, I see this:
fb1: Teralogic 751 frame buffer device
the fb0 is somewhere still defined, and when I try to access it, a page fault occurs. Is it wrong to leave the owner variable undefined?
Yes, that's wrong. The .owner is there to protect you from removing the module while it's still in use.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
-------------------------------------------------------
This SF.Net email sponsored by: ApacheCon 2003, 16-19 November in Las Vegas. Learn firsthand the latest developments in Apache, PHP, Perl, XML, Java, MySQL, WebDAV, and more! http://www.apachecon.com/
Thanks for you quick reply.
Quoted 7 lines · Geert Uytterhoeven
Quoted 3 lines · Manousaridis Angelos
I am trying to implement a framebuffer device without console support. I want to display only graphics, no text at all.
Is there a way to avoid the console take over?
Disable
CONFIG_VT_CONSOLE.
I did that. there is no change.
Quoted 9 lines
Quoted 6 lines
I don't have the actuall graphics device yet, so I have created an initial version of the driver looking a lot like the vfb device. I set the dispsw variable of the display structure to
fbcon_dummy.
When I load the module I see this:
fbcon_setup: No support for fontwidth 8fbcon_setup: type 0 (aux 0, depth 8) not supportedThat's harmless, and caused by
fbcon_dummy.
Quoted 7 lines
Quoted 4 lines
Console: switching to colour frame buffer device 80x30
fb0: Teralogic 751 frame buffer deviceThe module count increases to 63 and I cannot unload the module.
Because the virtual console subsystem uses 63 virtual consoles by default, and increases the module counter for each of them.
In the register_fremabuffer routine, this is called for the first framebuffer that is registered:
take_over_console(&fb_con, first_fb_vc, last_fb_vc, fbcon_is_default)
This is what I don't like. When that happens, I cannot free fb0. There is a give_up_console function but it is never called.
Quoted 6 lines
Quoted 2 lines
If I comment this line causing the owner variable to be undefined, the module count does not increase and the module can be unloaded. But It seems that the device is NOT unregistered. When I load the module
Your
module_cleanup()routine must unregister yourfb_info.
It does call unregister_framebuffer, but it returns "device busy" because fb0 is used as the system console.
I want either to avoid this :
"Console: switching to colour frame buffer device 80x30"
(which means take_over_console will not be called)
or, if I can't do that, to be able to take back by first framebuffer (fb0) from the console, so that I can unregister it.
What am I missing here?
--
Manousaridis Angelos
-------------------------------------------------------
This SF.Net email sponsored by: ApacheCon 2003, 16-19 November in Las Vegas. Learn firsthand the latest developments in Apache, PHP, Perl, XML, Java, MySQL, WebDAV, and more! http://www.apachecon.com/
Quoted 18 lines · Manousaridis Angelos
Quoted 10 lines
Quoted 7 lines
I don't have the actuall graphics device yet, so I have created an initial version of the driver looking a lot like the vfb device. I set the dispsw variable of the display structure to
fbcon_dummy. When I load the module I see this:
fbcon_setup: No support for fontwidth 8fbcon_setup: type 0 (aux 0, depth 8) not supportedThat's harmless, and caused by
fbcon_dummy.Quoted 7 lines
Quoted 4 lines
Console: switching to colour frame buffer device 80x30
fb0: Teralogic 751 frame buffer deviceThe module count increases to 63 and I cannot unload the module.
Because the virtual console subsystem uses 63 virtual consoles by default, and increases the module counter for each of them.
Quoted 7 lines
In the
register_fremabufferroutine, this is called for the first framebuffer that is registered:
take_over_console(&fb_con, first_fb_vc, last_fb_vc, fbcon_is_default)This is what I don't like. When that happens, I cannot free fb0. There is a
give_up_consolefunction but it is never called.
The module counters are actually incremented in the code before take_over_console() is called.
Quoted 11 lines
Quoted 7 lines
Quoted 3 lines
If I comment this line causing the owner variable to be undefined, the module count does not increase and the module can be unloaded. But It seems that the device is NOT unregistered. When I load the module
Your
module_cleanup()routine must unregister yourfb_info.It does call
unregister_framebuffer, but it returns "device busy" because fb0 is used as the system console.
Quoted 7 lines
I want either to avoid this :
"Console: switching to colour frame buffer device 80x30" (which meanstake_over_consolewill not be called)
or, if I can't do that, to be able to take back by first framebuffer (fb0) from the console, so that I can unregister it.What am I missing here?
Comment out the code to increment the module counters and the code that calls take_over_console().
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
-------------------------------------------------------
This SF.Net email sponsored by: ApacheCon 2003, 16-19 November in Las Vegas. Learn firsthand the latest developments in Apache, PHP, Perl, XML, Java, MySQL, WebDAV, and more! http://www.apachecon.com/