problems with 0.9.8 drivers and rme9652
Hi,
it seems to me that with alsa 0.9.8 drivers it's not possible to load snd-rme9652. With 0.9.7c there is no problem. The snd-hdsp driver works in both versions (i tried both cards with both alsa versions).
error message:
modprobe snd-rme9652 /lib/modules/2.4.22/kernel/sound/pci/rme9652/snd-rme9652.o: init_module:
No such device
modprobe: insmod /lib/modules/2.4.22/kernel/sound/pci/rme9652/snd-rme9652.o failed
modprobe: insmod snd-rme9652 failed
Has anybody similar problems?
Martin Dausel
-------------------------------------------------------
This SF.Net email sponsored by: ApacheCon 2003, 16-19 November in Las Vegas. Learn firsthand the latest developments in Apache, PHP, Perl, XML, Java, MySQL, WebDAV, and more! http://www.apachecon.com/
Quoted 5 lines
Hi,
it seems to me that with alsa 0.9.8 drivers it's not possible to load snd-rme9652. With 0.9.7c there is no problem. The snd-hdsp driver works in both versions (i tried both cards with both alsa versions).
Quoted 7 lines
error message:
modprobe snd-rme9652/lib/modules/2.4.22/kernel/sound/pci/rme9652/snd-rme9652.o:init_module:
No such device
modprobe: insmod/lib/modules/2.4.22/kernel/sound/pci/rme9652/snd-rme9652.ofailed
modprobe: insmod snd-rme9652 failed
what type of RME hardware do you have? send us the output of lspci -v
-------------------------------------------------------
This SF.Net email sponsored by: ApacheCon 2003, 16-19 November in Las Vegas. Learn firsthand the latest developments in Apache, PHP, Perl, XML, Java, MySQL, WebDAV, and more! http://www.apachecon.com/
Paul Davis wrote:
Hi, it seems to me that with alsa 0.9.8 drivers it's not possible to load snd-rme9652. With 0.9.7c there is no problem. The snd-hdsp driver works in both versions (i tried both cards with both alsa versions). error message: modprobe snd-rme9652 /lib/modules/2.4.22/kernel/sound/pci/rme9652/snd-rme9652.o: init_module: No such device modprobe: insmod /lib/modules/2.4.22/kernel/sound/pci/rme9652/snd-rme9652.o failed modprobe: insmod snd-rme9652 failed
1) just a quick note to point out that whether you know it or not, the email program you are using is sending out copies of your mail in both plain text and HTML formats. increasingly on the net, there are filters being put in place that silently dump HTML-formatted email. some mailing lists will not ever accept such posts. as long as you do this, you are (1) wasting network bandwidth by sending messages that are typically more than twice as long as they could be (2) making it harder for people using traditional email readers to read them (3) risking the chance that people will never see your mail because its filtered before reaching their email inbox.
2) as requested, please send the output of lspci -v
-------------------------------------------------------
This SF.Net email sponsored by: ApacheCon 2003, 16-19 November in Las Vegas. Learn firsthand the latest developments in Apache, PHP, Perl, XML, Java, MySQL, WebDAV, and more! http://www.apachecon.com/
Quoted 11 lines · Paul Davis
1) just a quick note to point out that whether you know it or not, the email program you are using is sending out copies of your mail in both plain text and HTML formats. increasingly on the net, there are filters being put in place that silently dump HTML-formatted email. some mailing lists will not ever accept such posts. as long as you do this, you are (1) wasting network bandwidth by sending messages that are typically more than twice as long as they could be (2) making it harder for people using traditional email readers to read them (3) risking the chance that people will never see your mail because its filtered before reaching their email inbox.
Quoted 2 lines
2) as requested, please send the output of lspci -v
1)
I reprimand my email program and hope it will never ever do it again ;-)
2)
here is the output of lspci -v
00:00.0 Host bridge: Intel Corp.: Unknown device 2570 (rev 02)
Subsystem: Unknown device 1734:101b Flags: bus master, fast devsel, latency 0 Memory at e8000000 (32-bit, prefetchable) [size=128M] Capabilities: [e4] #09 [0106]
00:02.0 VGA compatible controller: Intel Corp.: Unknown device 2572 (rev 02) (prog-if 00 [VGA])
Subsystem: Unknown device 1734:101b Flags: bus master, fast devsel, latency 0, IRQ 9 Memory at f0000000 (32-bit, prefetchable) [size=128M] Memory at e0000000 (32-bit, non-prefetchable) [size=512K] I/O ports at 1000 [size=8] Capabilities: [d0] Power Management version 1
00:1d.0 USB Controller: Intel Corp.: Unknown device 24d2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Unknown device 1734:101c Flags: bus master, medium devsel, latency 0, IRQ 9 I/O ports at 1400 [size=32]
00:1d.1 USB Controller: Intel Corp.: Unknown device 24d4 (rev 02) (prog-if 00 [UHCI])
Subsystem: Unknown device 1734:101c Flags: bus master, medium devsel, latency 0, IRQ 11 I/O ports at 1800 [size=32]
00:1d.2 USB Controller: Intel Corp.: Unknown device 24d7 (rev 02) (prog-if 00 [UHCI])
Subsystem: Unknown device 1734:101c Flags: bus master, medium devsel, latency 0, IRQ 10 I/O ports at 1c00 [size=32]
00:1d.3 USB Controller: Intel Corp.: Unknown device 24de (rev 02) (prog-if 00 [UHCI])
Subsystem: Unknown device 1734:101c Flags: bus master, medium devsel, latency 0, IRQ 9 I/O ports at 2000 [size=32]
00:1d.7 USB Controller: Intel Corp.: Unknown device 24dd (rev 02) (prog-if 20 [EHCI])
Subsystem: Unknown device 1734:101c Flags: bus master, medium devsel, latency 0, IRQ 9 Memory at e0080000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] #0a [20a0]
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev c2) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=64 I/O behind bridge: 00003000-00003fff Memory behind bridge: e0100000-e1ffffff
00:1f.0 ISA bridge: Intel Corp.: Unknown device 24d0 (rev 02)
Flags: bus master, medium devsel, latency 0
00:1f.1 IDE interface: Intel Corp.: Unknown device 24db (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Unknown device 1734:101c
Flags: bus master, medium devsel, latency 0, IRQ 10
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at 2800 [size=16]
Memory at 20000000 (32-bit, non-prefetchable) [size=1K]
00:1f.3 SMBus: Intel Corp.: Unknown device 24d3 (rev 02)
Subsystem: Unknown device 1734:101c Flags: medium devsel, IRQ 5 I/O ports at 2400 [size=32]
03:05.0 Multimedia audio controller: Xilinx Corporation RME Digi9652 (Hammerfall) (rev 03)
Flags: bus master, stepping, slow devsel, latency 64, IRQ 5 Memory at e1000000 (32-bit, non-prefetchable) [size=16M]
03:08.0 Ethernet controller: Intel Corp.: Unknown device 1051 (rev 02)
Subsystem: Unknown device 1734:101a Flags: bus master, medium devsel, latency 66, IRQ 11 Memory at e0100000 (32-bit, non-prefetchable) [size=4K] I/O ports at 3000 [size=64] Capabilities: [dc] Power Management version 2
-------------------------------------------------------
This SF.Net email sponsored by: ApacheCon 2003, 16-19 November in Las Vegas. Learn firsthand the latest developments in Apache, PHP, Perl, XML, Java, MySQL, WebDAV, and more! http://www.apachecon.com/
A message that is not in the archive (sent off-list or not yet received): 1068750901.22388.1.camel@barbounia
Quoted 15 lines · Justin Cormack
Quoted 13 lines · Martin Dausel
Hi,
it seems to me that with alsa 0.9.8 drivers it's not possible to load snd-rme9652. With 0.9.7c there is no problem. The snd-hdsp driver works in both versions (i tried both cards with both alsa versions).error message:
modprobe snd-rme9652/lib/modules/2.4.22/kernel/sound/pci/rme9652/snd-rme9652.o:init_module:
No such device
modprobe: insmod/lib/modules/2.4.22/kernel/sound/pci/rme9652/snd-rme9652.ofailed
modprobe: insmod snd-rme9652 failed
Quoted 10 lines
Quoted 1 line
Has anybody similar problems?
did
snd_page_allocload? This failing because it cannot find enough memory gives this error. Try loadingsnd_page_allocearly in the boot process (in/etc/rc.sysinitsay).Justin
thanks for your suggestion but i know this problem/solution and tried it, but it doesn't fix my described problem.
martin
-------------------------------------------------------
This SF. Net email is sponsored by: GoToMyPC
GoToMyPC is the fast, easy and secure way to access your computer from any Web browser or wireless device. Click here to Try it Free!
https://www.gotomypc.com/tr/OSDN/AW/Q4_2003/t/g22lp?Target=mm/g22lp.tmpl
Quoted 23 lines · Martin Dausel
Quoted 22 lines · Justin Cormack
Quoted 13 lines · Martin Dausel
Hi,
it seems to me that with alsa 0.9.8 drivers it's not possible to load snd-rme9652. With 0.9.7c there is no problem. The snd-hdsp driver works in both versions (i tried both cards with both alsa versions).error message:
modprobe snd-rme9652/lib/modules/2.4.22/kernel/sound/pci/rme9652/snd-rme9652.o:init_module:
No such device
modprobe: insmod/lib/modules/2.4.22/kernel/sound/pci/rme9652/snd-rme9652.ofailed
modprobe: insmod snd-rme9652 failedQuoted 1 line
Has anybody similar problems?
did
snd_page_allocload? This failing because it cannot find enough memory gives this error. Try loadingsnd_page_allocearly in the boot process (in/etc/rc.sysinitsay).
Quoted 5 lines
Quoted 3 lines
Justin
thanks for your suggestion but i know this problem/solution and tried it, but it doesn't fix my described problem.
what does /var/log/messages say? It should give more detail.
Justin
-------------------------------------------------------
This SF. Net email is sponsored by: GoToMyPC
GoToMyPC is the fast, easy and secure way to access your computer from any Web browser or wireless device. Click here to Try it Free!
https://www.gotomypc.com/tr/OSDN/AW/Q4_2003/t/g22lp?Target=mm/g22lp.tmpl