Skip to contentSkip to conversation

Smartmedia 2.6.0-test9 problem.

DISCUSSION Patrick Beard 5 participants 10 messages Nov 18, 2003 – Nov 21, 2003

lore
Share & tools
lore
#0 lore raw

Hi,
I have two smartmedia cards 16mb and 64mb. I have recently compiled the Debian source for Kernel 2.6.0-test9.
I normally only use my 64mb card together with a usb reader. The problem I have led me to the wrong conclusion which I reported to this group. For this I apologise.

I have now clearly identified the problem and have repeated it and doubled checked to ensure that this post is accurate.
The problem is;
I can mount both the 16mb and 64mb cards if I use my camera. If I use my reader, the 16mb card mounts ok but, the 64mb card returns no media found. When I used the 2.4.19 kernel the 64mb card worked fine with the reader. A new addition to my setup (apart from 2.6-test) is a usb to serial adapter. I connect all these to a usb hub running in passive mode. In case the addition of the usb/serial adapter was not leaving enough power for the larger capacity SM card I attached the power adapter to the hub and switched it to 'powered'. This made not difference to the problem.
my fstab entry is;
/dev/sda1 /mnt/smedia vfat rw,user,noauto 0,0

when the 64mb card is mounted in the camera fdisk -l returns;

/dev/sda1 * 1 500 63972+ 1 FAT12

Any help on this would be appreciated.

__
Patrick

#1 lore raw
Quoted 1 line

/dev/sda1 /mnt/smedia vfat rw,user,noauto 0,0

There's a typo in the above - its actually;
/dev/sda1 /mnt/smedia vfat rw,user,noauto 0 0

--
Patrick

#2 lore raw
In reply to Patrick Beard
Quoted 5 lines · Patrick Beard

I have two smartmedia cards 16mb and 64mb. I have recently compiled the Debian source for Kernel 2.6.0-test9. I normally only use my 64mb card together with a usb reader. The problem I have led me to the wrong conclusion which I reported to this group. For this I apologise.

I wonder if you are seeing the same thing I see...

I have several different sized memory cards which I use using a usb adaptor. The kernel (I've only tried 2.4 not 2.6) recognises the first one fine, but refuses to update its internal knowledge of the size of the card so if I insert a different sized one it doesn't mount properly.

The work-around I use is to "rmmod usb-storage ; modprobe usb-storage" whenever I change memory card - this kicks the kernel into re-reading the size of the media (or maybe the partition table) and it all works fine after that.

This obviously isn't ideal but I haven't found a better solution.

Signature · 2 lines
Nick Craig-Wood
[email protected]
#3 lore raw
Quoted 8 lines

I wonder if you are seeing the same thing I see...

I have several different sized memory cards which I use using a usb adaptor. The kernel (I've only tried 2.4 not 2.6) recognises the first one fine, but refuses to update its internal knowledge of the size of the card so if I insert a different sized one it doesn't mount properly.

Quoted 6 lines

The work-around I use is to "rmmod usb-storage ; modprobe usb-storage" whenever I change memory card - this kicks the kernel into re-reading the size of the media (or maybe the partition table) and it all works fine after that.

This obviously isn't ideal but I haven't found a better solution.

Nick,

Thanks for that thought. I only recently found out about that. It led me to interpret my problem wrongly the first time.
Unfortunately this is not my problem. On a clean boot I can't mount the 64mb card in the reader, yet if I plug my camera in I can mount it there. The 16mb card however mounts no problem in the reader.

As an alternative to the fix for the problem you see. Here is a link I found that towards the bottom of the page has a solution. I haven't tried it myself, but it might interest you.

http://bmiller.customer.netspace.net.au/linux/c5050.html

If ever I get my problem sorted I'll give it a try myself.

--
Patrick

#4 lore raw
Quoted 5 lines · Parick Beard

Thanks for that thought. I only recently found out about that. It led me to interpret my problem wrongly the first time.
Unfortunately this is not my problem. On a clean boot I can't mount the 64mb card in the reader, yet if I plug my camera in I can mount it there. The 16mb card however mounts no problem in the reader.

I forgot what kind of reader and what kind of cards you used. This evening I fixed some problems with sddr09.c on SmartMedia cards larger than 16 MB.

(patch on request, or on linux-usb)

#5 lore raw
Quoted 8 lines
Quoted 2 lines

64mb card in the reader, yet if I plug my camera in I can mount it there. The 16mb card however mounts no problem in the reader.

I forgot what kind of reader and what kind of cards you used. This evening I fixed some problems with sddr09.c on SmartMedia cards larger than 16 MB.

(patch on request, or on linux-usb)

Thanks for getting back to me on this.
My cards are Olympus branded smartmedia cards (16mb & 64mb). The reader is a Belkin usb reader (part # F5U141xMSD.

I have made a bit of progress. I've not changed my Linux install. Instead today I bought myself a cheap 8 in 1 usb reader made by Typhoon. This reads both cards just fine.
As the Belkin worked fine until I installed 2.6.0-test9 I would be interested in applying your patch to see if it gets the Belkin working again. Could you email me it please.

--
Patrick

#6 lore raw
In reply to Nick Craig-Wood
Quoted 17 lines · Nick Craig-Wood
Quoted 5 lines · Patrick Beard

I have two smartmedia cards 16mb and 64mb. I have recently compiled the Debian source for Kernel 2.6.0-test9. I normally only use my 64mb card together with a usb reader. The problem I have led me to the wrong conclusion which I reported to this group. For this I apologise.

I wonder if you are seeing the same thing I see...

I have several different sized memory cards which I use using a usb adaptor. The kernel (I've only tried 2.4 not 2.6) recognises the first one fine, but refuses to update its internal knowledge of the size of the card so if I insert a different sized one it doesn't mount properly.

Quoted 7 lines

The work-around I use is to "rmmod usb-storage ; modprobe usb-storage" whenever I change memory card - this kicks the kernel into re-reading the size of the media (or maybe the partition table) and it all works fine after that.

This obviously isn't ideal but I haven't found a better solution.

I've had this problem with 2.4 kernels as well, and use "unplug the reader, rmmod, plug in the reader". I reported this a long time ago, and didn't get any response IIRC.

Eli
--------------------. "If it ain't broke now,
Eli Carter \ it will be soon." -- crypto-gram
eli.carter(a)inet.com `-------------------------------------------------

#7 lore raw
Quoted 25 lines · Eli Carter
Quoted 23 lines · Nick Craig-Wood
Quoted 5 lines · Patrick Beard

I have two smartmedia cards 16mb and 64mb. I have recently compiled the Debian source for Kernel 2.6.0-test9. I normally only use my 64mb card together with a usb reader. The problem I have led me to the wrong conclusion which I reported to this group. For this I apologise.

I wonder if you are seeing the same thing I see...

I have several different sized memory cards which I use using a usb adaptor. The kernel (I've only tried 2.4 not 2.6) recognises the first one fine, but refuses to update its internal knowledge of the size of the card so if I insert a different sized one it doesn't mount properly.

The work-around I use is to "rmmod usb-storage ; modprobe usb-storage" whenever I change memory card - this kicks the kernel into re-reading the size of the media (or maybe the partition table) and it all works fine after that.

Quoted 4 lines
Quoted 2 lines

This obviously isn't ideal but I haven't found a better solution.

I've had this problem with 2.4 kernels as well, and use "unplug the reader, rmmod, plug in the reader". I reported this a long time ago, and didn't get any response IIRC.

Oh, I just realized... I should mention that I was having this problem with CompactFlash cards of differing sizes/partitioning.

Eli
--------------------. "If it ain't broke now,
Eli Carter \ it will be soon." -- crypto-gram
eli.carter(a)inet.com `-------------------------------------------------

#8 lore raw
In reply to Eli Carter
Quoted 7 lines · Eli Carter
Quoted 2 lines · Nick Craig-Wood

The work-around I use is to "rmmod usb-storage ; modprobe usb-storage" whenever I change memory card - this kicks the kernel into re-reading

I've had this problem with 2.4 kernels as well, and use "unplug the reader, rmmod, plug in the reader". I reported this a long time ago,

There is a command that tells the kernel to reread:

	blockdev --rereadpt /dev/foo
#9 lore raw
In reply to Patrick Beard
Quoted 2 lines

I can mount both the 16mb and 64mb cards if I use my camera. If I use my reader, the 16mb card mounts ok but, the 64mb card returns no media found.

I was at this again last night. I'm no further forward but, I did notice the returned message is actually 'No medium found'. Don't no if this makes a difference to finding a solution.

--
Patrick