Toshiba Satellite 1905S303
Hello all,
Continuing my ongoing saga with this notebook...
I'm now running kernel 2.4.23.0-1mdk with it.
Not much has changed, but there was a little improvement: cpufreq
(p4-clockmod) works:
Nov 23 01:59:26 docmobile kernel: cpufreq: P4/Xeon(TM) CPU On-Demand Clock Modulation available
but speedstep-ich doesn't:
Nov 23 01:58:48 docmobile kernel: cpufreq: Intel(R) SpeedStep(TM) for this chipset not (yet) available.
and my /proc/acpi/processor/CPU0/info:
processor id: 0 acpi id: 0 bus mastering control: no power management: yes throttling control: no performance management: no limit interface: no
Anyway, the worst problem I have now is the system hanging whenever I try to switch the video-out (Fn-F5), which didn't happen with an older kernel (2.4.21 from Mandrake 9.1). It appears to generate a kernel oops/panic, but I cannot get to it, since this notebook doesn't have a serial port, and the one usb serial console patch I found was for kernel 2.6.
I did try a few different kernel 2.6 revisions (from test7-test9) but the behavior is the same. I also tried at least half a dozen 2.4.22 kernels, with the same result.
Any suggestions on solving this problem are welcome... for now the only thing I think would help would be to try 2.6 with an usb serial console patch to try and get the kernel panic/oops.
Len, you mentioned earlier that I could implement a thermal_zone through AML, do you have any pointers or code examples?
Signature · 12 lines
-- Erico Mendonca Techisa do Brasil ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/
A message that is not in the archive (sent off-list or not yet received): 3FC03405.9040807-cz9lu//[email protected]
Quoted 6 lines · Erico M Mendonca
Hello all,
Continuing my ongoing saga with this notebook...
I'm now running kernel 2.4.23.0-1mdk with it.
Quoted 8 lines
Not much has changed, but there was a little improvement: cpufreq
(p4-clockmod) works:Nov 23 01:59:26 docmobile kernel: cpufreq: P4/Xeon(TM) CPU On-DemandClock Modulation available
but speedstep-ich doesn't:
Nov 23 01:58:48 docmobile kernel: cpufreq: Intel(R) SpeedStep(TM) forthis chipset not (yet) available.
What say lspci -v?
Quoted 21 lines
and my
/proc/acpi/processor/CPU0/info:processor id: 0 acpi id: 0 bus mastering control: no power management: yes throttling control: no performance management: no limit interface: noAnyway, the worst problem I have now is the system hanging whenever I try to switch the video-out (Fn-F5), which didn't happen with an older kernel (2.4.21 from Mandrake 9.1). It appears to generate a kernel oops/panic, but I cannot get to it, since this notebook doesn't have a serial port, and the one usb serial console patch I found was for kernel 2.6.
I did try a few different kernel 2.6 revisions (from test7-test9) but the behavior is the same. I also tried at least half a dozen 2.4.22 kernels, with the same result.
Quoted 7 lines
Any suggestions on solving this problem are welcome... for now the only thing I think would help would be to try 2.6 with an usb serial console patch to try and get the kernel panic/oops.
Len, you mentioned earlier that I could implement a
thermal_zonethrough AML, do you have any pointers or code examples?
I have some. Could you send me your dsdt, please?
Signature · 11 lines
Ducrot Bruno -- Which is worse: ignorance or apathy? -- Don't know. Don't care. ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/