Skip to contentSkip to conversation

ACPI does not power off the machine automatically

DISCUSSION Boszormenyi Zoltan 2 participants 2 messages Dec 1, 2003

lore
Share & tools
lore
#0 lore raw

Hi,

I have a n ABit BP6 board with 2 Celeron/400MHz with the latest released version RU (beta) BIOS, it was released in 2000.

I am running 2.6.0-test10-mm1 at present
and it does not power off the machine. It writes

acpi_power_off called

at the end and stops there. But when I press Alt+SysRQ+o, it switches off. 1 out of (maybe) 50 occasions, the machine can switch itself off automatically.

But it worked earlier, I don't know which kernel it was.

I have to pass acpi=force to get ACPI working because of the BIOS date but it seems to work OK although I get some weird ACPI status messages during kernel boot. It writes something like \_PR_\CPU0 is missing from a (don't remember which) table.

Signature · 6 lines
Best regards,
Zoltán Böszörményi

---------------------
What did Hussein say about his knife?
One in Bush worth two in the hand.
#1 lore raw

man, 01.12.2003 kl. 08.53 skrev Boszormenyi Zoltan:

Quoted 5 lines

Hi,

I have a n ABit BP6 board with 2 Celeron/400MHz with the latest released version RU (beta) BIOS, it was released in 2000.

Quoted 8 lines

I am running 2.6.0-test10-mm1 at present
and it does not power off the machine. It writes

acpi_power_off called

at the end and stops there. But when I press Alt+SysRQ+o, it switches off. 1 out of (maybe) 50 occasions, the machine can switch itself off automatically.

I have the same problems on two different smp motherboards here. Works fine when booting with apm=power-off, though.

Best regards,
Stian