Problems with uscc and kernel 2.6.0-test11

Hello to all.

I have on uscc at address 320 and irq 5, it works fine under kernel 2.4.21-144 from SuSE 9.0. But under kernel 2.6.0-test11 i have problem when try to load it, shell freezes and if i do command 'ifconfig' in another shell it freezes as well. Since first kernel 2.6.0 i have problems with my uscc, never worked because of those freezes. Any help will be fine.
Another thing:
in kernel 2.6.0-test11 i use same .config than in SuSE.

Best 73 till then.

CT1DRB
David Quental

-
To unsubscribe from this list: send the line "unsubscribe linux-hams" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

Hello,

I've the same problem with a DRSI ISA card. it uses the scc driver.
With previous versions (I've tried -test2), sccinit was unable to found the control ports of the card (was telling "Missing"). With test 11, the driver seems to initialise fine

kernel: NET: Registered protocol family 3
kernel: AX.25: Z8530 SCC driver version 3.0.dl1bke
kernel: scc0: data port = 0x303 control port = 0x302 -- found
kernel: scc1: data port = 0x301 control port = 0x300 -- found

The the shell is dead. An other shell where I start listen dies too. The related process are not killable...

I'm running DEbian sid.

Signature · 2 lines

Ragards and 73
            - Jean-Luc

Quoted 14 lines · David Quental

Hello to all.

I have on uscc at address 320 and irq 5, it works fine under kernel 2.4.21-144 from SuSE 9.0. But under kernel 2.6.0-test11 i have problem when try to load it, shell freezes and if i do command 'ifconfig' in another shell it freezes as well. Since first kernel 2.6.0 i have problems with my uscc, never worked because of those freezes. Any help will be fine.
Another thing:
in kernel 2.6.0-test11 i use same .config than in SuSE.

Best 73 till then.

CT1DRB
David Quental

Quoted 4 lines

-
To unsubscribe from this list: send the line "unsubscribe linux- hams" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.ht

ml

Hello Jean-Luc.

Yes, here it is the same. shells are dead but aparently modem is initialized but nothing more. Lets wait.

Best regards and best 73.

Quoted 7 lines · On 2003.12.11 17:14:21 +0100 David Quental wrote:

Hello Jean-Luc.

Yes, here it is the same. shells are dead but aparently modem is initialized but nothing more. Lets wait.

Best regards and best 73.

I have a system running with an scc card.
I did fix some additional bugs in ax.25, but don't remember if I did anything with the scc card :) If the system survives the weekend I'll post a patch (and look at what exactly changed over the last few weeks)

Jeroen

-
To unsubscribe from this list: send the line "unsubscribe linux-hams" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html