Skip to contentSkip to conversation

PROBLEM: siimage.o on AMD768 platform

DISCUSSION Ola Leifler 1 participant 2 messages Dec 16, 2003

lore
Share & tools
lore
#0 lore raw

Hi!
[Formatted according to http://www.kernel.org/pub/linux/docs/lkml/reporting-bugs.html]
1. Brief description:
My Silicon Image 3112A controller doesn't recognize any of the two Seagate 7200.7 80Gb discs attached to it. Neither do the ide2/ide3 interfaces show up in /proc, according to the information below.

2. Full description:
When using siimage.o to access a dual channel Serial ATA controller with a Silicon Image 3112 chipset, none of the two hard discs are detected (No program can access /dev/hd[e-h]). However, the module refuses to unload (device busy). During boot, the card BIOS lists both discs.

3. Keywords:
modules, sata, siimage.o, amd768

4. Version information from /proc/version
Linux version 2.4.23 (root@localhost) (gcc version 3.2.3 (Debian)) #1 SMP mån dec 15 20:19:54 CET 2003

7. Environment
7.1 scripts/ver_linux output

Gnu C                  3.2.3
Gnu make               3.80
binutils               2.13.90.0.18
util-linux             2.12
mount                  2.11u
modutils               2.4.25
e2fsprogs              1.34-WIP
Linux C Library        2.3.2
Dynamic linker (ldd)   2.3.2
Procps                 3.1.14
Net-tools              1.60
Kbd                    1.06
Sh-utils               5.0
Modules Loaded         nvidia sg sr_mod autofs4 snd-seq-midi snd-seq-oss snd-seq-midi-event snd-seq snd-pcm-oss snd-mixer-oss snd-cmipci snd-pcm snd-page-alloc snd-opl3-lib snd-hwdep snd-timer snd-mpu401-uart snd-rawmidi snd-seq-device snd soundcore ipt_MASQUERADE ipt_state iptable_nat ip_conntrack iptable_filter ip_tables af_packet w83781d i2c-proc i2c-amd756 i2c-dev i2c-core ide-scsi siimage tulip crc32 rtc unix

7.2 Processor information from /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 6
model name : AMD Athlon(TM) MP 1700+
stepping : 2
cpu MHz : 1466.768
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow
bogomips : 2922.90

processor : 1
vendor_id : AuthenticAMD
cpu family : 6
model : 6
model name : AMD Athlon(TM) MP 1700+
stepping : 2
cpu MHz : 1466.768
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow
bogomips : 2929.45

7.3 Module information from /proc/modules
nvidia 1629504 22 (autoclean)

sg                     33644   0 (autoclean)
sr_mod                 16120   0 (autoclean)
autofs4                10420   1 (autoclean)
snd-seq-midi            4096   0 (autoclean) (unused)
snd-seq-oss            29920   0 (unused)
snd-seq-midi-event      3488   0 [snd-seq-midi snd-seq-oss]
snd-seq                40464   2 [snd-seq-midi snd-seq-oss snd-seq-midi-event]
snd-pcm-oss            38148   0 (unused)
snd-mixer-oss          13328   0 [snd-pcm-oss]
snd-cmipci             20992   0
snd-pcm                63168   0 [snd-pcm-oss snd-cmipci]
snd-page-alloc          6260   0 [snd-pcm]
snd-opl3-lib            6852   0 [snd-cmipci]
snd-hwdep               5440   0 [snd-opl3-lib]
snd-timer              15748   0 [snd-seq snd-pcm snd-opl3-lib]
snd-mpu401-uart         3600   0 [snd-cmipci]
snd-rawmidi            14176   0 [snd-seq-midi snd-mpu401-uart]
snd-seq-device          4244   0 [snd-seq-midi snd-seq-oss snd-seq snd-opl3-lib snd-rawmidi]
snd                    34436   0 [snd-seq-midi snd-seq-oss snd-seq-midi-event snd-seq snd-pcm-oss snd-mixer-oss snd-cmipci snd-pcm snd-opl3-lib snd-hwdep snd-timer snd-mpu401-uart snd-rawmidi snd-seq-device]
soundcore               4356   8 [snd]
ipt_MASQUERADE          1880   1 (autoclean)
ipt_state                568  25 (autoclean)
iptable_nat            17688   1 (autoclean) [ipt_MASQUERADE]
ip_conntrack           22984   2 (autoclean) [ipt_MASQUERADE ipt_state iptable_nat]
iptable_filter          1740   1 (autoclean)
ip_tables              13152   6 [ipt_MASQUERADE ipt_state iptable_nat iptable_filter]
af_packet              14856   2 (autoclean)
w83781d                22608   0 (unused)
i2c-proc                6292   0 [w83781d]
i2c-amd756              2952   0 (unused)
i2c-dev                 4096   0 (unused)
i2c-core               14212   0 [w83781d i2c-proc i2c-amd756 i2c-dev]
ide-scsi               10480   0
siimage                 8964   1
tulip                  40960   2
crc32                   2880   0 [tulip]
rtc                     7644   0 (autoclean)

unix 17512 47 (autoclean)

7.4 Loaded driver and hardware information from /proc/ioports first, /proc/iomem next 0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(set)
0330-0331 : MPU401 UART
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(set)
0cf8-0cff : PCI conf1
a000-cfff : PCI Bus #02
a400-a40f : CMD Technology Inc Silicon Image SiI 3112 SATARaid Controller a800-a803 : CMD Technology Inc Silicon Image SiI 3112 SATARaid Controller b000-b007 : CMD Technology Inc Silicon Image SiI 3112 SATARaid Controller b400-b403 : CMD Technology Inc Silicon Image SiI 3112 SATARaid Controller b800-b807 : CMD Technology Inc Silicon Image SiI 3112 SATARaid Controller c000-c0ff : LSI Logic / Symbios Logic 53c895
c000-c07f : sym53c8xx
c400-c4ff : Accton Technology Corporation EN-1216 Ethernet Adapter (#2)
c400-c4ff : tulip
c800-c8ff : C-Media Electronics Inc CM8738
c800-c8ff : CMI8738-MC6
d400-d4ff : Accton Technology Corporation EN-1216 Ethernet Adapter
d400-d4ff : tulip
d800-d80f : Advanced Micro Devices [AMD] AMD-768 [Opus] IDE
d800-d807 : ide0
d808-d80f : ide1
e4e0-e4ef : amd756-smbus
e800-e803 : Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] System Controller

00000000-0009f3ff : System RAM
0009f400-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000d0000-000d1fff : Extension ROM
000d4000-000d87ff : Extension ROM
000f0000-000fffff : System ROM
00100000-1ffebfff : System RAM
00100000-00252dfd : Kernel code
00252dfe-002a5da3 : Kernel data
1ffec000-1ffeefff : ACPI Tables
1ffef000-1fffefff : reserved
1ffff000-1fffffff : ACPI Non-volatile Storage
db000000-dd7fffff : PCI Bus #02
db000000-db0001ff : CMD Technology Inc Silicon Image SiI 3112 SATARaid
Controller
db000000-db0001ff : SiI3112 Serial ATA
db800000-db800fff : LSI Logic / Symbios Logic 53c895
dc000000-dc0000ff : LSI Logic / Symbios Logic 53c895
dc800000-dc8003ff : Accton Technology Corporation EN-1216 Ethernet
Adapter (#2)
dc800000-dc8003ff : tulip
dd800000-dd8003ff : Accton Technology Corporation EN-1216 Ethernet Adapter
dd800000-dd8003ff : tulip
de000000-df4fffff : PCI Bus #01
de000000-deffffff : nVidia Corporation NV20 [GeForce3 Ti 200]
df500000-df5fffff : PCI Bus #02
df700000-ef7fffff : PCI Bus #01
df800000-df87ffff : nVidia Corporation NV20 [GeForce3 Ti 200] e0000000-e7ffffff : nVidia Corporation NV20 [GeForce3 Ti 200]
ef800000-ef800fff : Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] System Controller f0000000-f7ffffff : Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] System Controller fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
ffff0000-ffffffff : reserved

7.5 PCI information from lspci -vvv as root
00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] System Controller (rev 11)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at ef800000 (32-bit, prefetchable) [size=4K]
Region 2: I/O ports at e800 [disabled] [size=4]
Capabilities: [a0] AGP version 2.0
Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW- AGP3- Rate=x1,x2,x4

       Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x4

00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] AGP Bridge (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000dfff
Memory behind bridge: de000000-df4fffff
Prefetchable memory behind bridge: df700000-ef7fffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-

00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] ISA (rev 04)
Subsystem: Asustek Computer, Inc. A7M-D Mainboard
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0

00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-768 [Opus] IDE (rev 04) (prog-if 8a [Master SecP PriP])
Subsystem: Advanced Micro Devices [AMD] AMD-768 [Opus] IDE
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at d800 [size=16]

00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] ACPI (rev 03)
Subsystem: Asustek Computer, Inc. A7M-D Mainboard
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

00:09.0 Ethernet controller: Accton Technology Corporation EN-1216 Ethernet Adapter (rev 11)
Subsystem: Standard Microsystems Corp [SMC]: Unknown device 1255
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (63750ns min, 63750ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at d400 [size=256]
Region 1: Memory at dd800000 (32-bit, non-prefetchable) [size=1K] Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=100mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.0 PCI bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] PCI (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000a000-0000cfff
Memory behind bridge: db000000-dd7fffff
Prefetchable memory behind bridge: df500000-df5fffff
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-

01:05.0 VGA compatible controller: nVidia Corporation NV20 [GeForce3 Ti 200] (rev a3) (prog-if 00 [VGA])
Subsystem: CardExpert Technology: Unknown device 0c3c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Region 2: Memory at df800000 (32-bit, prefetchable) [size=512K]
Expansion ROM at df7f0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW- AGP3- Rate=x1,x2,x4

       Command: RQ=16 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x4

02:04.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
Subsystem: Asustek Computer, Inc. CMI8738 6-channel audio controller
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at c800 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:05.0 Ethernet controller: Accton Technology Corporation EN-1216 Ethernet Adapter (rev 11)
Subsystem: Standard Microsystems Corp [SMC]: Unknown device 1255
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (63750ns min, 63750ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at c400 [size=256]
Region 1: Memory at dc800000 (32-bit, non-prefetchable) [size=1K] Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=100mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:06.0 SCSI storage controller: LSI Logic / Symbios Logic 53c895 (rev 01)
Subsystem: Tekram Technology Co.,Ltd. DC-390U2W
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (7500ns min, 16000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at c000 [size=256]
Region 1: Memory at dc000000 (32-bit, non-prefetchable) [size=256] Region 2: Memory at db800000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled] [size=64K]

02:08.0 Unknown mass storage controller: CMD Technology Inc Silicon Image SiI 3112 SATARaid Controller (rev 02)
Subsystem: CMD Technology Inc Silicon Image SiI 3112 SATARaid Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x01 (4 bytes)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at b800 [size=8]
Region 1: I/O ports at b400 [size=4]
Region 2: I/O ports at b000 [size=8]
Region 3: I/O ports at a800 [size=4]
Region 4: I/O ports at a400 [size=16]
Region 5: Memory at db000000 (32-bit, non-prefetchable) [size=512]
Expansion ROM at <unassigned> [disabled] [size=512K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-

7.6 SCSI information from /proc/scsi/scsi

Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: SEAGATE Model: ST318438LW Rev: 0002
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: ATAPI Model: CD-RW 52XMax Rev: 150D
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 01
Vendor: ATAPI Model: CD-RW 52XMax Rev: 150D
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 02
Vendor: ATAPI Model: CD-RW 52XMax Rev: 150D
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 03
Vendor: ATAPI Model: CD-RW 52XMax Rev: 150D
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 04
Vendor: ATAPI Model: CD-RW 52XMax Rev: 150D
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 05
Vendor: ATAPI Model: CD-RW 52XMax Rev: 150D
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 06
Vendor: ATAPI Model: CD-RW 52XMax Rev: 150D
Type: CD-ROM ANSI SCSI revision: 02

7.7 Other information

From dmesg:
SiI3112 Serial ATA: IDE controller at PCI slot 02:08.0 SiI3112 Serial ATA: chipset revision 2
SiI3112 Serial ATA: not 100% native mode: will probe irqs later
ide2: MMIO-DMA , BIOS settings: hde:pio, hdf:pio
ide3: MMIO-DMA , BIOS settings: hdg:pio, hdh:pio

TIA!

/Ola Leifler

#1 lore raw
Quoted 7 lines · Ola Leifler

Hi!
[Formatted according to http://www.kernel.org/pub/linux/docs/lkml/reporting-bugs.html]
1. Brief description:
My Silicon Image 3112A controller doesn't recognize any of the two Seagate 7200.7 80Gb discs attached to it. Neither do the ide2/ide3 interfaces show up in /proc, according to the information below.

2. Full description:
When using siimage.o to access a dual channel Serial ATA controller with a Silicon Image 3112 chipset, none of the two hard discs are detected (No program can access /dev/hd[e-h]). However, the module refuses to unload (device busy). During boot, the card BIOS lists both discs.

Some additional information which may or may not be of any assistance to Andre or Alan:

There doesn't seem to be any device on interrupt 19 though lspci -vvv suggested that.

# cat /proc/interrupts
          CPU0       CPU1      
 0:     234977     236815    IO-APIC-edge  timer
 1:       6117       6152    IO-APIC-edge  keyboard
 2:          0          0          XT-PIC  cascade
 8:          3          1    IO-APIC-edge  rtc
12:      87594      88013    IO-APIC-edge  PS/2 Mouse
14:          9         20    IO-APIC-edge  ide0
15:        204        269    IO-APIC-edge  ide1
16:     179228     178555   IO-APIC-level  nvidia
17:      15291      15367   IO-APIC-level  sym53c8xx, eth0, CMI8738-MC6
18:      19569      19540   IO-APIC-level  eth1
NMI:          0          0
LOC:     471710     471740
ERR:          0
MIS:          0
# cat /proc/devices   Character devices:
 1 mem
 2 pty/m%d
 3 pty/s%d
 4 tts/%d
 5 cua/%d
 7 vcs
10 misc
14 sound
21 sg
89 i2c
116 alsa
128 ptm
136 pts/%d
162 raw
195 nvidia

Block devices:
1 ramdisk
3 ide0
8 sd
11 sr
22 ide1
65 sd
66 sd

/Ola