Skip to contentSkip to conversation

use iptables to prevent DOS

DISCUSSION Bill Fung 1 participant 1 message Jan 2, 2004

lore
Share & tools
lore

Bill Fung

author
#0 lore raw

Hi all,

I want to use ipchains to prevent dos and log some dos packets.

From netfilter documentation:

Syn-flood protection:

||

# iptables -A FORWARD -p tcp --syn -m limit --limit 1/s -j ACCEPT

I wonder why it add to FORWARD chain? The dos should be against the local machine, so I guess it should add to INPUT chain, right?

I have used the following rules to prevent dos to my machine. I have search the web and can't find any dos tool to try my rules. May I ask if the following suit my purpose? The following mainly limit the rate of syn to 1 per second. It logs the excessive syn flood packet information to log and then drop that packet.

iptables -A INPUT -p tcp --syn -m limit --limit 1/s -j ACCEPT iptables -A INPUT -p tcp --syn -j LOG --log-prefix "SYN FLOOD " iptables -A INPUT -p tcp --syn -j DROP
iptables -L

Chain INPUT (policy ACCEPT)

target     prot opt source               destination
ACCEPT     tcp  --  anywhere             anywhere           tcp flags:SYN,RST,ACK/SYN limit: avg 1/sec burst 5
LOG        tcp  --  anywhere             anywhere           tcp flags:SYN,RST,ACK/SYN LOG level warning prefix `DEF '
DROP       tcp  --  anywhere             anywhere           tcp flags:SYN,RST,ACK/SYN

Chain FORWARD (policy ACCEPT)
target prot opt source destination

Chain OUTPUT (policy ACCEPT)
target prot opt source destination

Thanks a lot.

Besides, I would like to use "echo 1 > /proc/sys/net/ipv4/tcp_syncookies" too. Why approach is better for prevent dos? What is the differences? Is it the best to use both simultaneourly?

Bill
HKUST