Skip to contentSkip to conversation

JFFS2]

Fwd: Re: Eduardo Sabaj 1 participant 1 message Jan 2, 2004 Memory technology devices (MTD)

lore
Share & tools
lore
#0 lore raw

Dear sir,

I would be grateful if you could answer some of questions that are indicated below ...
On top of that, could you please tell me what other file systems (and on which media - flash, disk, etc) are supported by eCos?

Thanks for all,

Eduardo

-------- Original Message --------
Subject: Re: [ECOS] JFFS2
Date: 02 Jan 2004 09:17:31 -0700
From: Gary Thomas <[email protected]>
Organization: MLB Associates
To: Eduardo Sabaj <[email protected]>
CC: [email protected]
References: <[email protected]>

Quoted 8 lines · Eduardo Sabaj

I am interested in building an embedded application using the eCos, but I have some questions about it.. I read that one of the file systems that is supported is JFFS2 but the question is, if it is a file system that runs only over a flash device (can I have a JFFS2 file system on DiskOnModule?)
On the other hand, I wonder if JFFS2 is well protected over power fails (I mean if the file system avoid losing information after the power fail) ?

This question would probably be better answered by the folks that support JFFS2 - try [email protected]

JFFS2 should work with most any type of FLASH device, but AFAIK there are no drivers currently available for DiskOnModule for eCos (but you should be able to write them). As for persistence, JFFS2 stands for "Journaling Flash File System v2", which means that data is kept in a journaled fashion and should be safe to recover, even after a power failure.

Again, discuss this with the MTD/JFFS2 folks for the best advice.

Signature · 7 lines
Gary Thomas <[email protected]>
MLB Associates


-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss