Skip to contentSkip to conversation

: ISA cards (opl3sa2 in particular) are not detected properly on 2.6 kernels

ALSA - utils 0001326 [email protected] 1 participant 1 message Aug 12, 2005

lore
Share & tools
lore
#0 lore raw

A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1326>
======================================================================

Reported By:                ahaning
Assigned To:                perex
======================================================================
Project:                    ALSA - utils
Issue ID:                   1326
Category:                   alsaconf
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     assigned
======================================================================
Date Submitted:             08-10-2005 03:39 CEST
Last Modified:              08-12-2005 15:56 CEST

======================================================================
Summary: ISA cards (opl3sa2 in particular) are not detected
properly on 2.6 kernels
Description:
When brute-force detecting my OPL3SA2 card, the IRQ and DMA1/DMA2 settings are incorrectly detected by alsaconf from alsa-utils. For example, the default BIOS settings are IRQ=11, DMA1=0, DMA2=1, but alsaconf detects IRQ=5, DMA1=1, DMA2=0. No matter the BIOS settings, alsaconf always detects those settings (IRQ=5, DMA1=1, DMA2=0). If I set the BIOS settings to that, then the card will make sound (after touching the mixer while playing audio).

According to perex (author of the opl3sa2 driver):

"The alsaconf tries to gather free resources (irq/dma/ports) from the /proc filesystem. It might be extended to gather this information also from /sys filesystem."
======================================================================
Relationships ID Summary
----------------------------------------------------------------------
related to 0000879 (snd_)opl3sa2 (isa) doesn't work (fails...
======================================================================

----------------------------------------------------------------------
tiwai - 08-12-05 15:45
----------------------------------------------------------------------
.. and do NOT define any module parameters in /etc/modprobe.conf or whatever. And do just "modprobe snd-opl3sa2".

----------------------------------------------------------------------
perex - 08-12-05 15:56
----------------------------------------------------------------------
takashi: See the previous bug (related to). The BIOS disables ISA PnP feature of the opl3sa2 card. It is not visible with the ISA PnP subsystem or pnpdump from the isapnptools package. So, it behaves like a legacy ISA card.

ahaning: You have a driver provided by vendor for Windows, right? Then it might do some magic which we don't know. Or you may try, if the driver resources in windows follows the BIOS settings. Perhaps, you'll have similar problems with non-default values.

The datasheet for your chip says that the ISA PnP subsystem should detect the card even if it is configured in manual mode.

Issue History
Date Modified Username Field Change
======================================================================
08-10-05 03:39 ahaning New Issue
08-10-05 03:39 ahaning Distribution => Slackware 9.1 (but
it's not distribution-specific)

08-10-05 03:39 ahaning        Kernel Version            => 2.6.12.2        
08-10-05 13:26 perex          Status                   new => assigned     
08-10-05 13:26 perex          Assigned To               => perex           
08-10-05 13:26 perex          File Added: alsaconf                         
08-10-05 13:28 perex          Note Added: 0005747                          
08-10-05 13:29 perex          Project                  ALSA - driver => ALSA -
utils
08-10-05 13:30 perex          Relationship added       related to 0000879  
08-10-05 13:31 perex          Category                 1_OTHERS => alsaconf
08-10-05 14:55 ahaning        Note Added: 0005748                          
08-11-05 00:24 ahaning        Note Added: 0005752                          
08-11-05 23:59 ahaning        Note Added: 0005763                          
08-12-05 00:00 ahaning        Note Edited: 0005763                         
08-12-05 03:09 ahaning        Note Added: 0005764                          
08-12-05 09:29 perex          Note Added: 0005766                          
08-12-05 12:54 ahaning        Note Added: 0005767                          
08-12-05 15:11 perex          Summary                  ISAPNP cards (opl3sa2 in
particular) are not detected properly on 2.6 kernels => ISA cards (opl3sa2 in
particular) are not detected properly on 2.6 kernels
08-12-05 15:14 perex          Note Added: 0005768                          
08-12-05 15:35 tiwai          Note Added: 0005769                          
08-12-05 15:36 ahaning        Note Added: 0005770                          
08-12-05 15:44 tiwai          Note Added: 0005771                          
08-12-05 15:45 tiwai          Note Added: 0005772                          
08-12-05 15:56 perex          Note Added: 0005777                          

======================================================================

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf