manual: escape backslashes in "parsed-literal" blocks
PATCH RESEND 1/1 manual: escape backslashes in "parsed-literal" blocks
According to
<https://docutils.sourceforge.io/docs/ref/rst/directives.html#parsed-literal>,
"inline markup is recognized and there is no protection from parsing. Backslash-escapes may be necessary to prevent unintended parsing".
The qemu(1) manual page (formatted with Sphinx 2.2.2) has several overlong lines on my system. A stand-alone backslash at EOL serves as line continuation in a "parsed-literal" block. Therefore, escape the backslashes that we want to appear as such in the formatted documentation.
---
Notes:
Resending with Peter's email address in the Cc: tag fixed. Sorry!
docs/system/device-url-syntax.rst.inc | 8 +- qemu-options.hx | 108 ++++++++++---------- 2 files changed, 58 insertions(+), 58 deletions(-)
docs/system/device-url-syntax.rst.inc +4 -4
@@ -25,8 +25,8 @@ These are specified using a special URL syntax. .. parsed-literal:: - |qemu_system| -iscsi initiator-name=iqn.2001-04.com.example:my-initiator \ - -cdrom iscsi://192.0.2.1/iqn.2001-04.com.example/2 \ + |qemu_system| -iscsi initiator-name=iqn.2001-04.com.example:my-initiator \\ + -cdrom iscsi://192.0.2.1/iqn.2001-04.com.example/2 \\ -drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1 Example (CHAP username/password via URL):
@@ -39,8 +39,8 @@ These are specified using a special URL syntax. .. parsed-literal:: - LIBISCSI_CHAP_USERNAME="user" \ - LIBISCSI_CHAP_PASSWORD="password" \ + LIBISCSI_CHAP_USERNAME="user" \\ + LIBISCSI_CHAP_PASSWORD="password" \\ |qemu_system| -drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1 ``NBD``
qemu-options.hx +54 -54
229 lines not on this page · raw message
Signature · 1 line
2.19.1.3.g30247aa5d201
Quoted 12 lines · Laszlo Ersek
According to
<https://docutils.sourceforge.io/docs/ref/rst/directives.html#parsed-literal>,
"inline markup is recognized and there is no protection from parsing. Backslash-escapes may be necessary to prevent unintended parsing".The qemu(1) manual page (formatted with Sphinx 2.2.2) has several overlong lines on my system. A stand-alone backslash at EOL serves as line continuation in a "parsed-literal" block. Therefore, escape the backslashes that we want to appear as such in the formatted documentation.
Cc Peter Maydell <[email protected]>Signed-off-by Laszlo Ersek <[email protected]>
Quoted 8 lines
---
Notes:
Resending with Peter's email address in the Cc: tag fixed. Sorry!docs/system/device-url-syntax.rst.inc | 8 +- qemu-options.hx | 108 ++++++++++---------- 2 files changed, 58 insertions(+), 58 deletions(-)
Quoted 15 lines · Philippe Mathieu-Daudé
Quoted 14 lines · Laszlo Ersek
According to
<https://docutils.sourceforge.io/docs/ref/rst/directives.html#parsed-literal>,
"inline markup is recognized and there is no protection from parsing. Backslash-escapes may be necessary to prevent unintended parsing".The qemu(1) manual page (formatted with Sphinx 2.2.2) has several overlong lines on my system. A stand-alone backslash at EOL serves as line continuation in a "parsed-literal" block. Therefore, escape the backslashes that we want to appear as such in the formatted documentation.
Cc Peter Maydell <[email protected]>Signed-off-by Laszlo Ersek <[email protected]>---
Quoted 9 lines
Quoted 6 lines
Notes:
Resending with Peter's email address in the Cc: tag fixed. Sorry!docs/system/device-url-syntax.rst.inc | 8 +- qemu-options.hx | 108 ++++++++++---------- 2 files changed, 58 insertions(+), 58 deletions(-)Reviewed-by Philippe Mathieu-Daudé <[email protected]>
Thanks for the quick check!
Laszlo
Cc'ing qemu-trivial@
Quoted 299 lines · Laszlo Ersek
According to
<https://docutils.sourceforge.io/docs/ref/rst/directives.html#parsed-literal>,
"inline markup is recognized and there is no protection from parsing. Backslash-escapes may be necessary to prevent unintended parsing".The qemu(1) manual page (formatted with Sphinx 2.2.2) has several overlong lines on my system. A stand-alone backslash at EOL serves as line continuation in a "parsed-literal" block. Therefore, escape the backslashes that we want to appear as such in the formatted documentation.
Cc Peter Maydell <[email protected]>Signed-off-by Laszlo Ersek <[email protected]>---
Notes:
Resending with Peter's email address in the Cc: tag fixed. Sorry!docs/system/device-url-syntax.rst.inc | 8 +- qemu-options.hx | 108 ++++++++++---------- 2 files changed, 58 insertions(+), 58 deletions(-)docs/system/device-url-syntax.rst.inc +4
-4@@ -25,8 +25,8 @@ These are specified using a special URL syntax. .. parsed-literal:: - |qemu_system| -iscsi initiator-name=iqn.2001-04.com.example:my-initiator \ - -cdrom iscsi://192.0.2.1/iqn.2001-04.com.example/2 \ + |qemu_system| -iscsi initiator-name=iqn.2001-04.com.example:my-initiator \\ + -cdrom iscsi://192.0.2.1/iqn.2001-04.com.example/2 \\ -drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1 Example (CHAP username/password via URL):@@ -39,8 +39,8 @@ These are specified using a special URL syntax. .. parsed-literal:: - LIBISCSI_CHAP_USERNAME="user" \ - LIBISCSI_CHAP_PASSWORD="password" \ + LIBISCSI_CHAP_USERNAME="user" \\ + LIBISCSI_CHAP_PASSWORD="password" \\ |qemu_system| -drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1 ``NBD``qemu-options.hx +54
-54@@ -373,9 +373,9 @@ SRST .. parsed-literal:: - |qemu_system| \ - -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \ - -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \ + |qemu_system| \\ + -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \\ + -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \\ -drive file=/dev/fdset/2,index=0,media=disk ERST@@ -1338,9 +1338,9 @@ SRST .. parsed-literal:: - |qemu_system| \ - -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \ - -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \ + |qemu_system| \\ + -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \\ + -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \\ -drive file=/dev/fdset/2,index=0,media=disk You can connect a CDROM to the slave of ide0:@@ -2593,7 +2593,7 @@ SRST .. parsed-literal:: - |qemu_system| -hda linux.img -boot n -device e1000,netdev=n1 \ + |qemu_system| -hda linux.img -boot n -device e1000,netdev=n1 \\ -netdev user,id=n1,tftp=/path/to/tftp/files,bootfile=/pxelinux.0 ``smb=dir[,smbserver=addr]``@@ -2703,15 +2703,15 @@ SRST #launch a QEMU instance with two NICs, each one connected #to a TAP device - |qemu_system| linux.img \ - -netdev tap,id=nd0,ifname=tap0 -device e1000,netdev=nd0 \ + |qemu_system| linux.img \\ + -netdev tap,id=nd0,ifname=tap0 -device e1000,netdev=nd0 \\ -netdev tap,id=nd1,ifname=tap1 -device rtl8139,netdev=nd1 .. parsed-literal:: #launch a QEMU instance with the default network helper to #connect a TAP device to bridge br0 - |qemu_system| linux.img -device virtio-net-pci,netdev=n1 \ + |qemu_system| linux.img -device virtio-net-pci,netdev=n1 \\ -netdev tap,id=n1,"helper=/path/to/qemu-bridge-helper" ``-netdev bridge,id=id[,br=bridge][,helper=helper]``@@ -2749,12 +2749,12 @@ SRST .. parsed-literal:: # launch a first QEMU instance - |qemu_system| linux.img \ - -device e1000,netdev=n1,mac=52:54:00:12:34:56 \ + |qemu_system| linux.img \\ + -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\ -netdev socket,id=n1,listen=:1234 # connect the network of this instance to the network of the first instance - |qemu_system| linux.img \ - -device e1000,netdev=n2,mac=52:54:00:12:34:57 \ + |qemu_system| linux.img \\ + -device e1000,netdev=n2,mac=52:54:00:12:34:57 \\ -netdev socket,id=n2,connect=127.0.0.1:1234 ``-netdev socket,id=id[,fd=h][,mcast=maddr:port[,localaddr=addr]]``@@ -2776,16 +2776,16 @@ SRST .. parsed-literal:: # launch one QEMU instance - |qemu_system| linux.img \ - -device e1000,netdev=n1,mac=52:54:00:12:34:56 \ + |qemu_system| linux.img \\ + -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\ -netdev socket,id=n1,mcast=230.0.0.1:1234 # launch another QEMU instance on same "bus" - |qemu_system| linux.img \ - -device e1000,netdev=n2,mac=52:54:00:12:34:57 \ + |qemu_system| linux.img \\ + -device e1000,netdev=n2,mac=52:54:00:12:34:57 \\ -netdev socket,id=n2,mcast=230.0.0.1:1234 # launch yet another QEMU instance on same "bus" - |qemu_system| linux.img \ - -device e1000,netdev=n3,mac=52:54:00:12:34:58 \ + |qemu_system| linux.img \\ + -device e1000,netdev=n3,mac=52:54:00:12:34:58 \\ -netdev socket,id=n3,mcast=230.0.0.1:1234 Example (User Mode Linux compat.):@@ -2793,8 +2793,8 @@ SRST .. parsed-literal:: # launch QEMU instance (note mcast address selected is UML's default) - |qemu_system| linux.img \ - -device e1000,netdev=n1,mac=52:54:00:12:34:56 \ + |qemu_system| linux.img \\ + -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\ -netdev socket,id=n1,mcast=239.192.168.1:1102 # launch UML /path/to/linux ubd0=/path/to/root_fs eth0=mcast@@ -2803,8 +2803,8 @@ SRST .. parsed-literal:: - |qemu_system| linux.img \ - -device e1000,netdev=n1,mac=52:54:00:12:34:56 \ + |qemu_system| linux.img \\ + -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\ -netdev socket,id=n1,mcast=239.192.168.1:1102,localaddr=1.2.3.4 ``-netdev l2tpv3,id=id,src=srcaddr,dst=dstaddr[,srcport=srcport][,dstport=dstport],txsession=txsession[,rxsession=rxsession][,ipv6][,udp][,cookie64][,counter][,pincounter][,txcookie=txcookie][,rxcookie=rxcookie][,offset=offset]``@@ -2860,9 +2860,9 @@ SRST # Setup tunnel on linux host using raw ip as encapsulation # on 1.2.3.4 - ip l2tp add tunnel remote 4.3.2.1 local 1.2.3.4 tunnel_id 1 peer_tunnel_id 1 \ + ip l2tp add tunnel remote 4.3.2.1 local 1.2.3.4 tunnel_id 1 peer_tunnel_id 1 \\ encap udp udp_sport 16384 udp_dport 16384 - ip l2tp add session tunnel_id 1 name vmtunnel0 session_id \ + ip l2tp add session tunnel_id 1 name vmtunnel0 session_id \\ 0xFFFFFFFF peer_session_id 0xFFFFFFFF ifconfig vmtunnel0 mtu 1500 ifconfig vmtunnel0 up@@ -2872,7 +2872,7 @@ SRST # on 4.3.2.1 # launch QEMU instance - if your network has reorder or is very lossy add ,pincounter - |qemu_system| linux.img -device e1000,netdev=n1 \ + |qemu_system| linux.img -device e1000,netdev=n1 \\ -netdev l2tpv3,id=n1,src=4.2.3.1,dst=1.2.3.4,udp,srcport=16384,dstport=16384,rxsession=0xffffffff,txsession=0xffffffff,counter ``-netdev vde,id=id[,sock=socketpath][,port=n][,group=groupname][,mode=octalmode]``@@ -4627,8 +4627,8 @@ SRST .. parsed-literal:: - # |qemu_system| \ - -object tls-cipher-suites,id=mysuite0,priority=@SYSTEM \ + # |qemu_system| \\ + -object tls-cipher-suites,id=mysuite0,priority=@SYSTEM \\ -fw_cfg name=etc/edk2/https/ciphers,gen_id=mysuite0 ``-object filter-buffer,id=id,netdev=netdevid,interval=t[,queue=all|rx|tx][,status=on|off][,position=head|tail|id=<id>][,insert=behind|before]``@@ -4791,10 +4791,10 @@ SRST .. parsed-literal:: - # |qemu_system| \ - [...] \ - -object cryptodev-backend-builtin,id=cryptodev0 \ - -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \ + # |qemu_system| \\ + [...] \\ + -object cryptodev-backend-builtin,id=cryptodev0 \\ + -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \\ ``-object cryptodev-vhost-user,id=id,chardev=chardevid[,queues=queues]``@@ -4810,11 +4810,11 @@ SRST .. parsed-literal:: - # |qemu_system| \ - [...] \ - -chardev socket,id=chardev0,path=/path/to/socket \ - -object cryptodev-vhost-user,id=cryptodev0,chardev=chardev0 \ - -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \ + # |qemu_system| \\ + [...] \\ + -chardev socket,id=chardev0,path=/path/to/socket \\ + -object cryptodev-vhost-user,id=cryptodev0,chardev=chardev0 \\ + -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \\ ``-object secret,id=id,data=string,format=raw|base64[,keyid=secretid,iv=string]``@@ -4892,9 +4892,9 @@ SRST .. parsed-literal:: - # |qemu_system| \ - -object secret,id=secmaster0,format=base64,file=key.b64 \ - -object secret,id=sec0,keyid=secmaster0,format=base64,\ + # |qemu_system| \\ + -object secret,id=secmaster0,format=base64,file=key.b64 \\ + -object secret,id=sec0,keyid=secmaster0,format=base64,\\ data=$SECRET,iv=$(<iv.b64) ``-object sev-guest,id=id,cbitpos=cbitpos,reduced-phys-bits=val,[sev-device=string,policy=policy,handle=handle,dh-cert-file=file,session-file=file]``@@ -4941,10 +4941,10 @@ SRST .. parsed-literal:: - # |qemu_system_x86| \ - ...... - -object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=5 \ - -machine ...,memory-encryption=sev0 + # |qemu_system_x86| \\ + ...... \\ + -object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=5 \\ + -machine ...,memory-encryption=sev0 \\ ``-object authz-simple,id=id,identity=string``@@ -4962,9 +4962,9 @@ SRST .. parsed-literal:: - # |qemu_system| \ - ... - -object 'authz-simple,id=auth0,identity=CN=laptop.example.com,,O=Example Org,,L=London,,ST=London,,C=GB' \ + # |qemu_system| \\ + ... \\ + -object 'authz-simple,id=auth0,identity=CN=laptop.example.com,,O=Example Org,,L=London,,ST=London,,C=GB' \\ Note the use of quotes due to the x509 distinguished name@@ -5013,9 +5013,9 @@ SRST .. parsed-literal:: - # |qemu_system| \ - ... - -object authz-simple,id=auth0,filename=/etc/qemu/vnc-sasl.acl,refresh=yes + # |qemu_system| \\ + ... \\ + -object authz-simple,id=auth0,filename=/etc/qemu/vnc-sasl.acl,refresh=yes \\ ``-object authz-pam,id=id,service=string``@@ -5032,9 +5032,9 @@ SRST .. parsed-literal:: - # |qemu_system| \ - ... - -object authz-pam,id=auth0,service=qemu-vnc + # |qemu_system| \\ + ... \\ + -object authz-pam,id=auth0,service=qemu-vnc \\ There would then be a corresponding config file for PAM at
Quoted 1 line · Philippe Mathieu-Daudé
Cc'ing qemu-trivial@
Thanks!
The patch was posted a week ago (and reviewed as well, by you, thanks!) -- is there something I need to do for getting this merged?
Thank you
Laszlo
Quoted 302 lines · Laszlo Ersek
Quoted 299 lines
According to
<https://docutils.sourceforge.io/docs/ref/rst/directives.html#parsed-literal>,
"inline markup is recognized and there is no protection from parsing. Backslash-escapes may be necessary to prevent unintended parsing".The qemu(1) manual page (formatted with Sphinx 2.2.2) has several overlong lines on my system. A stand-alone backslash at EOL serves as line continuation in a "parsed-literal" block. Therefore, escape the backslashes that we want to appear as such in the formatted documentation.
Cc Peter Maydell <[email protected]>Signed-off-by Laszlo Ersek <[email protected]>---
Notes:
Resending with Peter's email address in the Cc: tag fixed. Sorry!docs/system/device-url-syntax.rst.inc | 8 +- qemu-options.hx | 108 ++++++++++---------- 2 files changed, 58 insertions(+), 58 deletions(-)docs/system/device-url-syntax.rst.inc +4
-4@@ -25,8 +25,8 @@ These are specified using a special URL syntax. .. parsed-literal:: - |qemu_system| -iscsi initiator-name=iqn.2001-04.com.example:my-initiator \ - -cdrom iscsi://192.0.2.1/iqn.2001-04.com.example/2 \ + |qemu_system| -iscsi initiator-name=iqn.2001-04.com.example:my-initiator \\ + -cdrom iscsi://192.0.2.1/iqn.2001-04.com.example/2 \\ -drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1 Example (CHAP username/password via URL):@@ -39,8 +39,8 @@ These are specified using a special URL syntax. .. parsed-literal:: - LIBISCSI_CHAP_USERNAME="user" \ - LIBISCSI_CHAP_PASSWORD="password" \ + LIBISCSI_CHAP_USERNAME="user" \\ + LIBISCSI_CHAP_PASSWORD="password" \\ |qemu_system| -drive file=iscsi://192.0.2.1/iqn.2001-04.com.example/1 ``NBD``qemu-options.hx +54
-54@@ -373,9 +373,9 @@ SRST .. parsed-literal:: - |qemu_system| \ - -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \ - -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \ + |qemu_system| \\ + -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \\ + -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \\ -drive file=/dev/fdset/2,index=0,media=disk ERST@@ -1338,9 +1338,9 @@ SRST .. parsed-literal:: - |qemu_system| \ - -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \ - -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \ + |qemu_system| \\ + -add-fd fd=3,set=2,opaque="rdwr:/path/to/file" \\ + -add-fd fd=4,set=2,opaque="rdonly:/path/to/file" \\ -drive file=/dev/fdset/2,index=0,media=disk You can connect a CDROM to the slave of ide0:@@ -2593,7 +2593,7 @@ SRST .. parsed-literal:: - |qemu_system| -hda linux.img -boot n -device e1000,netdev=n1 \ + |qemu_system| -hda linux.img -boot n -device e1000,netdev=n1 \\ -netdev user,id=n1,tftp=/path/to/tftp/files,bootfile=/pxelinux.0 ``smb=dir[,smbserver=addr]``@@ -2703,15 +2703,15 @@ SRST #launch a QEMU instance with two NICs, each one connected #to a TAP device - |qemu_system| linux.img \ - -netdev tap,id=nd0,ifname=tap0 -device e1000,netdev=nd0 \ + |qemu_system| linux.img \\ + -netdev tap,id=nd0,ifname=tap0 -device e1000,netdev=nd0 \\ -netdev tap,id=nd1,ifname=tap1 -device rtl8139,netdev=nd1 .. parsed-literal:: #launch a QEMU instance with the default network helper to #connect a TAP device to bridge br0 - |qemu_system| linux.img -device virtio-net-pci,netdev=n1 \ + |qemu_system| linux.img -device virtio-net-pci,netdev=n1 \\ -netdev tap,id=n1,"helper=/path/to/qemu-bridge-helper" ``-netdev bridge,id=id[,br=bridge][,helper=helper]``@@ -2749,12 +2749,12 @@ SRST .. parsed-literal:: # launch a first QEMU instance - |qemu_system| linux.img \ - -device e1000,netdev=n1,mac=52:54:00:12:34:56 \ + |qemu_system| linux.img \\ + -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\ -netdev socket,id=n1,listen=:1234 # connect the network of this instance to the network of the first instance - |qemu_system| linux.img \ - -device e1000,netdev=n2,mac=52:54:00:12:34:57 \ + |qemu_system| linux.img \\ + -device e1000,netdev=n2,mac=52:54:00:12:34:57 \\ -netdev socket,id=n2,connect=127.0.0.1:1234 ``-netdev socket,id=id[,fd=h][,mcast=maddr:port[,localaddr=addr]]``@@ -2776,16 +2776,16 @@ SRST .. parsed-literal:: # launch one QEMU instance - |qemu_system| linux.img \ - -device e1000,netdev=n1,mac=52:54:00:12:34:56 \ + |qemu_system| linux.img \\ + -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\ -netdev socket,id=n1,mcast=230.0.0.1:1234 # launch another QEMU instance on same "bus" - |qemu_system| linux.img \ - -device e1000,netdev=n2,mac=52:54:00:12:34:57 \ + |qemu_system| linux.img \\ + -device e1000,netdev=n2,mac=52:54:00:12:34:57 \\ -netdev socket,id=n2,mcast=230.0.0.1:1234 # launch yet another QEMU instance on same "bus" - |qemu_system| linux.img \ - -device e1000,netdev=n3,mac=52:54:00:12:34:58 \ + |qemu_system| linux.img \\ + -device e1000,netdev=n3,mac=52:54:00:12:34:58 \\ -netdev socket,id=n3,mcast=230.0.0.1:1234 Example (User Mode Linux compat.):@@ -2793,8 +2793,8 @@ SRST .. parsed-literal:: # launch QEMU instance (note mcast address selected is UML's default) - |qemu_system| linux.img \ - -device e1000,netdev=n1,mac=52:54:00:12:34:56 \ + |qemu_system| linux.img \\ + -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\ -netdev socket,id=n1,mcast=239.192.168.1:1102 # launch UML /path/to/linux ubd0=/path/to/root_fs eth0=mcast@@ -2803,8 +2803,8 @@ SRST .. parsed-literal:: - |qemu_system| linux.img \ - -device e1000,netdev=n1,mac=52:54:00:12:34:56 \ + |qemu_system| linux.img \\ + -device e1000,netdev=n1,mac=52:54:00:12:34:56 \\ -netdev socket,id=n1,mcast=239.192.168.1:1102,localaddr=1.2.3.4 ``-netdev l2tpv3,id=id,src=srcaddr,dst=dstaddr[,srcport=srcport][,dstport=dstport],txsession=txsession[,rxsession=rxsession][,ipv6][,udp][,cookie64][,counter][,pincounter][,txcookie=txcookie][,rxcookie=rxcookie][,offset=offset]``@@ -2860,9 +2860,9 @@ SRST # Setup tunnel on linux host using raw ip as encapsulation # on 1.2.3.4 - ip l2tp add tunnel remote 4.3.2.1 local 1.2.3.4 tunnel_id 1 peer_tunnel_id 1 \ + ip l2tp add tunnel remote 4.3.2.1 local 1.2.3.4 tunnel_id 1 peer_tunnel_id 1 \\ encap udp udp_sport 16384 udp_dport 16384 - ip l2tp add session tunnel_id 1 name vmtunnel0 session_id \ + ip l2tp add session tunnel_id 1 name vmtunnel0 session_id \\ 0xFFFFFFFF peer_session_id 0xFFFFFFFF ifconfig vmtunnel0 mtu 1500 ifconfig vmtunnel0 up@@ -2872,7 +2872,7 @@ SRST # on 4.3.2.1 # launch QEMU instance - if your network has reorder or is very lossy add ,pincounter - |qemu_system| linux.img -device e1000,netdev=n1 \ + |qemu_system| linux.img -device e1000,netdev=n1 \\ -netdev l2tpv3,id=n1,src=4.2.3.1,dst=1.2.3.4,udp,srcport=16384,dstport=16384,rxsession=0xffffffff,txsession=0xffffffff,counter ``-netdev vde,id=id[,sock=socketpath][,port=n][,group=groupname][,mode=octalmode]``@@ -4627,8 +4627,8 @@ SRST .. parsed-literal:: - # |qemu_system| \ - -object tls-cipher-suites,id=mysuite0,priority=@SYSTEM \ + # |qemu_system| \\ + -object tls-cipher-suites,id=mysuite0,priority=@SYSTEM \\ -fw_cfg name=etc/edk2/https/ciphers,gen_id=mysuite0 ``-object filter-buffer,id=id,netdev=netdevid,interval=t[,queue=all|rx|tx][,status=on|off][,position=head|tail|id=<id>][,insert=behind|before]``@@ -4791,10 +4791,10 @@ SRST .. parsed-literal:: - # |qemu_system| \ - [...] \ - -object cryptodev-backend-builtin,id=cryptodev0 \ - -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \ + # |qemu_system| \\ + [...] \\ + -object cryptodev-backend-builtin,id=cryptodev0 \\ + -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \\ ``-object cryptodev-vhost-user,id=id,chardev=chardevid[,queues=queues]``@@ -4810,11 +4810,11 @@ SRST .. parsed-literal:: - # |qemu_system| \ - [...] \ - -chardev socket,id=chardev0,path=/path/to/socket \ - -object cryptodev-vhost-user,id=cryptodev0,chardev=chardev0 \ - -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \ + # |qemu_system| \\ + [...] \\ + -chardev socket,id=chardev0,path=/path/to/socket \\ + -object cryptodev-vhost-user,id=cryptodev0,chardev=chardev0 \\ + -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 \\ ``-object secret,id=id,data=string,format=raw|base64[,keyid=secretid,iv=string]``@@ -4892,9 +4892,9 @@ SRST .. parsed-literal:: - # |qemu_system| \ - -object secret,id=secmaster0,format=base64,file=key.b64 \ - -object secret,id=sec0,keyid=secmaster0,format=base64,\ + # |qemu_system| \\ + -object secret,id=secmaster0,format=base64,file=key.b64 \\ + -object secret,id=sec0,keyid=secmaster0,format=base64,\\ data=$SECRET,iv=$(<iv.b64) ``-object sev-guest,id=id,cbitpos=cbitpos,reduced-phys-bits=val,[sev-device=string,policy=policy,handle=handle,dh-cert-file=file,session-file=file]``@@ -4941,10 +4941,10 @@ SRST .. parsed-literal:: - # |qemu_system_x86| \ - ...... - -object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=5 \ - -machine ...,memory-encryption=sev0 + # |qemu_system_x86| \\ + ...... \\ + -object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=5 \\ + -machine ...,memory-encryption=sev0 \\ ``-object authz-simple,id=id,identity=string``@@ -4962,9 +4962,9 @@ SRST .. parsed-literal:: - # |qemu_system| \ - ... - -object 'authz-simple,id=auth0,identity=CN=laptop.example.com,,O=Example Org,,L=London,,ST=London,,C=GB' \ + # |qemu_system| \\ + ... \\ + -object 'authz-simple,id=auth0,identity=CN=laptop.example.com,,O=Example Org,,L=London,,ST=London,,C=GB' \\ Note the use of quotes due to the x509 distinguished name@@ -5013,9 +5013,9 @@ SRST .. parsed-literal:: - # |qemu_system| \ - ... - -object authz-simple,id=auth0,filename=/etc/qemu/vnc-sasl.acl,refresh=yes + # |qemu_system| \\ + ... \\ + -object authz-simple,id=auth0,filename=/etc/qemu/vnc-sasl.acl,refresh=yes \\ ``-object authz-pam,id=id,service=string``@@ -5032,9 +5032,9 @@ SRST .. parsed-literal:: - # |qemu_system| \ - ... - -object authz-pam,id=auth0,service=qemu-vnc + # |qemu_system| \\ + ... \\ + -object authz-pam,id=auth0,service=qemu-vnc \\ There would then be a corresponding config file for PAM at
Laurent Vivier
AppliedLe 15/09/2020 à 09:57, Laszlo Ersek a écrit :
Quoted 7 lines · Philippe Mathieu-Daudé
Quoted 1 line
Cc'ing qemu-trivial@
Thanks!
The patch was posted a week ago (and reviewed as well, by you, thanks!) -- is there something I need to do for getting this merged?
Applied to my trivial-patches branch.
Thanks,
Laurent
Quoted 10 lines · Laurent Vivier
Le 15/09/2020 à 09:57, Laszlo Ersek a écrit :
Quoted 7 lines · Philippe Mathieu-Daudé
Quoted 1 line
Cc'ing qemu-trivial@
Thanks!
The patch was posted a week ago (and reviewed as well, by you, thanks!) -- is there something I need to do for getting this merged?
Applied to my trivial-patches branch.
Awesome, thanks!
Laszlo