4.10-rc1: thinkpad x60: who ate my cpu?
Hi!
I used to have two cpus, and Thinkpad X60 should have two cores, but I only see one on 4.10-rc1. This machine went through many suspend/resume cycles. When backups finish, I'll try -rc2.
pavel@duo:~$ uname -a Linux duo 4.10.0-rc1+ #304 SMP Mon Dec 26 10:33:24 CET 2016 i686 GNU/Linux pavel@duo:~$ zcat /proc/config.gz | grep SMP CONFIG_X86_32_SMP=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_SMP=y # CONFIG_X86_BIGSMP is not set CONFIG_PM_SLEEP_SMP=y pavel@duo:~$ cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 14 model name : Genuine Intel(R) CPU T2400 @ 1.83GHz stepping : 8 cpu MHz : 1833.000 cache size : 2048 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fdiv_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon bts aperfmperf pni monitor vmx est tm2 xtpr pdcm dtherm bugs : bogomips : 3657.62 clflush size : 64 cache_alignment : 64 address sizes : 32 bits physical, 32 bits virtual power management:
pavel@duo:~$
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Hi!
Quoted 3 lines
I used to have two cpus, and Thinkpad X60 should have two cores, but I only see one on 4.10-rc1. This machine went through many suspend/resume cycles. When backups finish, I'll try -rc2.
Whoever did it, he seems to have returned the cpu in -rc3. All seems to be good now.
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Quoted 9 lines · Pavel Machek
Hi!
Quoted 3 lines
I used to have two cpus, and Thinkpad X60 should have two cores, but I only see one on 4.10-rc1. This machine went through many suspend/resume cycles. When backups finish, I'll try -rc2.
Whoever did it, he seems to have returned the cpu in -rc3. All seems to be good now.
Pavel
Actually since you have mentioned - I have checked my x60 - same problem - only one CPU. However I was running 4.8.13 with uptime 33 days, multiple sleep/wake-ups. Installed a current EOL 4.8.17 and rebooted - I see 2 CPUs. So the issue is older then 4.10 kernel, and I suspect it is the CPU hotplug / wakeup related...
Woody
Hi!
Quoted 9 lines · Woody Suwalski
Quoted 7 lines · Pavel Machek
Hi!
Quoted 3 lines
I used to have two cpus, and Thinkpad X60 should have two cores, but I only see one on 4.10-rc1. This machine went through many suspend/resume cycles. When backups finish, I'll try -rc2.
Whoever did it, he seems to have returned the cpu in -rc3. All seems to be good now.
Quoted 6 lines
Actually since you have mentioned - I have checked my x60 - same problem - only one CPU. However I was running 4.8.13 with uptime 33 days, multiple sleep/wake-ups.
Installed a current EOL 4.8.17 and rebooted - I see 2 CPUs. So the issue is older then 4.10 kernel, and I suspect it is the CPU hotplug / wakeup related...
Hmm. So I seen two cores in -rc3 after boot. But it is quite well possible that -rc1 was ok just after boot, too, and problem happened sometime later (probably during suspend/resume cycles). Let me go back to -rc1 to check.
Best regards,
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Quoted 19 lines · Pavel Machek
Hi!
Quoted 9 lines · Woody Suwalski
Quoted 7 lines · Pavel Machek
Hi!
Quoted 3 lines
I used to have two cpus, and Thinkpad X60 should have two cores, but I only see one on 4.10-rc1. This machine went through many suspend/resume cycles. When backups finish, I'll try -rc2.
Whoever did it, he seems to have returned the cpu in -rc3. All seems to be good now.
Quoted 6 lines
Actually since you have mentioned - I have checked my x60 - same problem - only one CPU. However I was running 4.8.13 with uptime 33 days, multiple sleep/wake-ups.
Installed a current EOL 4.8.17 and rebooted - I see 2 CPUs. So the issue is older then 4.10 kernel, and I suspect it is the CPU hotplug / wakeup related...
Quoted 4 lines
Hmm. So I seen two cores in -rc3 after boot. But it is quite well possible that -rc1 was ok just after boot, too, and problem happened sometime later (probably during suspend/resume cycles). Let me go back to -rc1 to check.
Indeed in -rc1 I see both CPUs after boot. So we have hard to reproduce case where 4.8 to 4.10 kernels lose one of the cpu cores...
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Quoted 18 lines · Pavel Machek
Quoted 17 lines · Pavel Machek
Hi!
Quoted 14 lines · Woody Suwalski
Quoted 7 lines · Pavel Machek
Hi!
Quoted 3 lines
I used to have two cpus, and Thinkpad X60 should have two cores, but I only see one on 4.10-rc1. This machine went through many suspend/resume cycles. When backups finish, I'll try -rc2.
Whoever did it, he seems to have returned the cpu in -rc3. All seems to be good now.
Actually since you have mentioned - I have checked my x60 - same problem - only one CPU. However I was running 4.8.13 with uptime 33 days, multiple sleep/wake-ups.
Installed a current EOL 4.8.17 and rebooted - I see 2 CPUs. So the issue is older then 4.10 kernel, and I suspect it is the CPU hotplug / wakeup related...
Quoted 9 lines
Quoted 4 lines
Hmm. So I seen two cores in -rc3 after boot. But it is quite well possible that -rc1 was ok just after boot, too, and problem happened sometime later (probably during suspend/resume cycles). Let me go back to -rc1 to check.
Indeed in -rc1 I see both CPUs after boot. So we have hard to reproduce case where 4.8 to 4.10 kernels lose one of the cpu cores...
Managed to duplicate - but it took again a long time - I have an uptime of 29 days. It must have happened in the last day, as I kept checking as often as I remembered.
The kernel is 4.8.17 EOL, installed almost a month ago.
Platform ThinkPad x60, Intel(R) Core(TM) Duo CPU T2400 @ 1.83GHz
In dmesg I see that it used to be when 2 CPUs were OK:
[690409.476107] PM: noirq suspend of devices complete after 79.914 msecs [690409.476547] ACPI: Preparing to enter system sleep state S3 [690409.780081] ACPI : EC: EC stopped [690409.780083] PM: Saving platform NVS memory [690409.780284] Disabling non-boot CPUs ... [690409.805284] smpboot: CPU 1 is now offline [690409.816464] ACPI: Low-level resume complete [690409.816464] ACPI : EC: EC started [690409.816464] PM: Restoring platform NVS memory [690409.816464] Enabling non-boot CPUs ... [690409.840574] x86: Booting SMP configuration: [690409.840576] smpboot: Booting Node 0 Processor 1 APIC 0x1 [690409.805271] Initializing CPU#1 [690409.805271] Disabled fast string operations [690409.888252] cache: parent cpu1 should not be sleeping [690409.920185] CPU1 is up [690409.922288] ACPI: Waking up from system sleep state S3
Then the CPU1 failed to start:
[691329.776108] PM: noirq suspend of devices complete after 79.941 msecs [691329.776550] ACPI: Preparing to enter system sleep state S3 [691330.080081] ACPI : EC: EC stopped [691330.080083] PM: Saving platform NVS memory [691330.080284] Disabling non-boot CPUs ... [691330.105303] smpboot: CPU 1 is now offline [691330.116477] ACPI: Low-level resume complete [691330.116477] ACPI : EC: EC started [691330.116477] PM: Restoring platform NVS memory [691330.116477] Enabling non-boot CPUs ... [691330.140570] x86: Booting SMP configuration: [691330.140572] smpboot: Booting Node 0 Processor 1 APIC 0x1 [691340.140015] smpboot: do_boot_cpu failed(-1) to wakeup CPU#1 [691340.164445] Error taking CPU1 up: -5 [691340.166309] ACPI: Waking up from system sleep state S3
And now it is:
[692517.868523] ACPI: Preparing to enter system sleep state S3 [692518.172074] ACPI : EC: EC stopped [692518.172076] PM: Saving platform NVS memory [692518.172269] Disabling non-boot CPUs ... [692518.172269] ACPI: Low-level resume complete [692518.172269] ACPI : EC: EC started [692518.172269] PM: Restoring platform NVS memory [692518.172269] ACPI: Waking up from system sleep state S3
Is there any test I could do on the CPU wakeup while in that state?
Woody
Quoted 81 lines · Woody Suwalski
Quoted 18 lines · Pavel Machek
Quoted 17 lines · Pavel Machek
Hi!
Quoted 14 lines · Woody Suwalski
Quoted 7 lines · Pavel Machek
Hi!
Quoted 3 lines
I used to have two cpus, and Thinkpad X60 should have two cores, but I only see one on 4.10-rc1. This machine went through many suspend/resume cycles. When backups finish, I'll try -rc2.
Whoever did it, he seems to have returned the cpu in -rc3. All seems to be good now.
Actually since you have mentioned - I have checked my x60 - same problem - only one CPU. However I was running 4.8.13 with uptime 33 days, multiple sleep/wake-ups.
Installed a current EOL 4.8.17 and rebooted - I see 2 CPUs. So the issue is older then 4.10 kernel, and I suspect it is the CPU hotplug / wakeup related...Quoted 9 lines
Quoted 4 lines
Hmm. So I seen two cores in -rc3 after boot. But it is quite well possible that -rc1 was ok just after boot, too, and problem happened sometime later (probably during suspend/resume cycles). Let me go back to -rc1 to check.
Indeed in -rc1 I see both CPUs after boot. So we have hard to reproduce case where 4.8 to 4.10 kernels lose one of the cpu cores...
Managed to duplicate - but it took again a long time - I have an uptime of 29 days. It must have happened in the last day, as I kept checking as often as I remembered.
The kernel is 4.8.17 EOL, installed almost a month ago.
Platform ThinkPad x60, Intel(R) Core(TM) Duo CPU T2400 @ 1.83GHzIn dmesg I see that it used to be when 2 CPUs were OK:
[690409.476107] PM: noirq suspend of devices complete after 79.914 msecs [690409.476547] ACPI: Preparing to enter system sleep state S3 [690409.780081] ACPI : EC: EC stopped [690409.780083] PM: Saving platform NVS memory [690409.780284] Disabling non-boot CPUs ... [690409.805284] smpboot: CPU 1 is now offline [690409.816464] ACPI: Low-level resume complete [690409.816464] ACPI : EC: EC started [690409.816464] PM: Restoring platform NVS memory [690409.816464] Enabling non-boot CPUs ... [690409.840574] x86: Booting SMP configuration: [690409.840576] smpboot: Booting Node 0 Processor 1 APIC 0x1 [690409.805271] Initializing CPU#1 [690409.805271] Disabled fast string operations [690409.888252] cache: parent cpu1 should not be sleeping [690409.920185] CPU1 is up [690409.922288] ACPI: Waking up from system sleep state S3Then the CPU1 failed to start:
[691329.776108] PM: noirq suspend of devices complete after 79.941 msecs [691329.776550] ACPI: Preparing to enter system sleep state S3 [691330.080081] ACPI : EC: EC stopped [691330.080083] PM: Saving platform NVS memory [691330.080284] Disabling non-boot CPUs ... [691330.105303] smpboot: CPU 1 is now offline [691330.116477] ACPI: Low-level resume complete [691330.116477] ACPI : EC: EC started [691330.116477] PM: Restoring platform NVS memory [691330.116477] Enabling non-boot CPUs ... [691330.140570] x86: Booting SMP configuration: [691330.140572] smpboot: Booting Node 0 Processor 1 APIC 0x1 [691340.140015] smpboot: do_boot_cpu failed(-1) to wakeup CPU#1 [691340.164445] Error taking CPU1 up: -5 [691340.166309] ACPI: Waking up from system sleep state S3And now it is:
[692517.868523] ACPI: Preparing to enter system sleep state S3 [692518.172074] ACPI : EC: EC stopped [692518.172076] PM: Saving platform NVS memory [692518.172269] Disabling non-boot CPUs ... [692518.172269] ACPI: Low-level resume complete [692518.172269] ACPI : EC: EC started [692518.172269] PM: Restoring platform NVS memory [692518.172269] ACPI: Waking up from system sleep state S3
Quoted 4 lines
Is there any test I could do on the CPU wakeup while in that state?
Woody
Is there a way to kick the offline-CPU into operation from /sys level?
Hi!
Quoted 50 lines
Quoted 50 lines
The kernel is 4.8.17 EOL, installed almost a month ago.
Platform ThinkPad x60, Intel(R) Core(TM) Duo CPU T2400 @ 1.83GHzIn dmesg I see that it used to be when 2 CPUs were OK:
[690409.476107] PM: noirq suspend of devices complete after 79.914 msecs [690409.476547] ACPI: Preparing to enter system sleep state S3 [690409.780081] ACPI : EC: EC stopped [690409.780083] PM: Saving platform NVS memory [690409.780284] Disabling non-boot CPUs ... [690409.805284] smpboot: CPU 1 is now offline [690409.816464] ACPI: Low-level resume complete [690409.816464] ACPI : EC: EC started [690409.816464] PM: Restoring platform NVS memory [690409.816464] Enabling non-boot CPUs ... [690409.840574] x86: Booting SMP configuration: [690409.840576] smpboot: Booting Node 0 Processor 1 APIC 0x1 [690409.805271] Initializing CPU#1 [690409.805271] Disabled fast string operations [690409.888252] cache: parent cpu1 should not be sleeping [690409.920185] CPU1 is up [690409.922288] ACPI: Waking up from system sleep state S3Then the CPU1 failed to start:
[691329.776108] PM: noirq suspend of devices complete after 79.941 msecs [691329.776550] ACPI: Preparing to enter system sleep state S3 [691330.080081] ACPI : EC: EC stopped [691330.080083] PM: Saving platform NVS memory [691330.080284] Disabling non-boot CPUs ... [691330.105303] smpboot: CPU 1 is now offline [691330.116477] ACPI: Low-level resume complete [691330.116477] ACPI : EC: EC started [691330.116477] PM: Restoring platform NVS memory [691330.116477] Enabling non-boot CPUs ... [691330.140570] x86: Booting SMP configuration: [691330.140572] smpboot: Booting Node 0 Processor 1 APIC 0x1 [691340.140015] smpboot: do_boot_cpu failed(-1) to wakeup CPU#1 [691340.164445] Error taking CPU1 up: -5 [691340.166309] ACPI: Waking up from system sleep state S3And now it is:
[692517.868523] ACPI: Preparing to enter system sleep state S3 [692518.172074] ACPI : EC: EC stopped [692518.172076] PM: Saving platform NVS memory [692518.172269] Disabling non-boot CPUs ... [692518.172269] ACPI: Low-level resume complete [692518.172269] ACPI : EC: EC started [692518.172269] PM: Restoring platform NVS memory [692518.172269] ACPI: Waking up from system sleep state S3
Quoted 3 lines
Quoted 2 lines
Is there any test I could do on the CPU wakeup while in that state?
Is there a way to kick the offline-CPU into operation from /sys level?
echo 0 > /sys/devices/system/cpu/cpu1/online
should work. And... good thinking :-).
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Quoted 52 lines · Pavel Machek
Hi!
Quoted 50 lines
Quoted 50 lines
The kernel is 4.8.17 EOL, installed almost a month ago.
Platform ThinkPad x60, Intel(R) Core(TM) Duo CPU T2400 @ 1.83GHzIn dmesg I see that it used to be when 2 CPUs were OK:
[690409.476107] PM: noirq suspend of devices complete after 79.914 msecs [690409.476547] ACPI: Preparing to enter system sleep state S3 [690409.780081] ACPI : EC: EC stopped [690409.780083] PM: Saving platform NVS memory [690409.780284] Disabling non-boot CPUs ... [690409.805284] smpboot: CPU 1 is now offline [690409.816464] ACPI: Low-level resume complete [690409.816464] ACPI : EC: EC started [690409.816464] PM: Restoring platform NVS memory [690409.816464] Enabling non-boot CPUs ... [690409.840574] x86: Booting SMP configuration: [690409.840576] smpboot: Booting Node 0 Processor 1 APIC 0x1 [690409.805271] Initializing CPU#1 [690409.805271] Disabled fast string operations [690409.888252] cache: parent cpu1 should not be sleeping [690409.920185] CPU1 is up [690409.922288] ACPI: Waking up from system sleep state S3Then the CPU1 failed to start:
[691329.776108] PM: noirq suspend of devices complete after 79.941 msecs [691329.776550] ACPI: Preparing to enter system sleep state S3 [691330.080081] ACPI : EC: EC stopped [691330.080083] PM: Saving platform NVS memory [691330.080284] Disabling non-boot CPUs ... [691330.105303] smpboot: CPU 1 is now offline [691330.116477] ACPI: Low-level resume complete [691330.116477] ACPI : EC: EC started [691330.116477] PM: Restoring platform NVS memory [691330.116477] Enabling non-boot CPUs ... [691330.140570] x86: Booting SMP configuration: [691330.140572] smpboot: Booting Node 0 Processor 1 APIC 0x1 [691340.140015] smpboot: do_boot_cpu failed(-1) to wakeup CPU#1 [691340.164445] Error taking CPU1 up: -5 [691340.166309] ACPI: Waking up from system sleep state S3And now it is:
[692517.868523] ACPI: Preparing to enter system sleep state S3 [692518.172074] ACPI : EC: EC stopped [692518.172076] PM: Saving platform NVS memory [692518.172269] Disabling non-boot CPUs ... [692518.172269] ACPI: Low-level resume complete [692518.172269] ACPI : EC: EC started [692518.172269] PM: Restoring platform NVS memory [692518.172269] ACPI: Waking up from system sleep state S3
Quoted 8 lines
Quoted 3 lines
Quoted 2 lines
Is there any test I could do on the CPU wakeup while in that state?
Is there a way to kick the offline-CPU into operation from /sys level?
echo 0 >
/sys/devices/system/cpu/cpu1/onlineshould work. And... good thinking :-).
Pavel
Did not work,
echo 0 > /sys/devices/system/cpu/cpu1/online -su: echo: write error: Device or resource busy
However
echo 1 > /sys/devices/system/cpu/cpu1/online
did not return an error ( but still only CPU0 seen)
Interesting experiment: I have hibernated and then woke up - and still only CPU0. I was expecting that after the power cycle the hotplug will bring CPU1 up...
Woody
Hi!
Quoted 21 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
And now it is:
[692517.868523] ACPI: Preparing to enter system sleep state S3 [692518.172074] ACPI : EC: EC stopped [692518.172076] PM: Saving platform NVS memory [692518.172269] Disabling non-boot CPUs ... [692518.172269] ACPI: Low-level resume complete [692518.172269] ACPI : EC: EC started [692518.172269] PM: Restoring platform NVS memory [692518.172269] ACPI: Waking up from system sleep state S3Quoted 7 lines
Quoted 3 lines
Quoted 2 lines
Is there any test I could do on the CPU wakeup while in that state?
Is there a way to kick the offline-CPU into operation from /sys level?
echo 0 >
/sys/devices/system/cpu/cpu1/onlineshould work. And... good thinking :-).
PavelDid not work,
echo 0 >/sys/devices/system/cpu/cpu1/online-su: echo: write error: Device or resource busy
Quoted 7 lines
However
echo 1 >/sys/devices/system/cpu/cpu1/online
did not return an error ( but still only CPU0 seen)Interesting experiment: I have hibernated and then woke up - and still only CPU0. I was expecting that after the power cycle the hotplug will bring CPU1 up...
Which is interesting indeed. Hardware was powercycled, so what is broken is probably some kernel state...
[Evil: /sys/devices/cpu/ -- some perf stuff.
/sys/devices/system/cpu -- that's where real CPU stuff is hiding.]
cd /sys/devices/system/cpu/cpu1
while true; do echo 0 > online; echo 1 > online; done
...crashes x60 with 4.10-rc in few minutes. [Which is bad -- it should not die, but also good -- this is easier to reproduce then running 100 suspend cycles.]
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Quoted 6 lines · Pavel Machek
cd
/sys/devices/system/cpu/cpu1
while true; do echo 0 > online; echo 1 > online; done...crashes x60 with 4.10-rc in few minutes. [Which is bad -- it should not die, but also good -- this is easier to reproduce then running 100 suspend cycles.]
Can you tell where it crashes?
Thanks,
tglx
Hi!
Quoted 9 lines · Thomas Gleixner
Quoted 6 lines · Pavel Machek
cd
/sys/devices/system/cpu/cpu1
while true; do echo 0 > online; echo 1 > online; done...crashes x60 with 4.10-rc in few minutes. [Which is bad -- it should not die, but also good -- this is easier to reproduce then running 100 suspend cycles.]
Can you tell where it crashes?
I did not expect a crash, so I was in X... I have a feeling that this will be reproducible on a lot of hardware, but let me try.
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Quoted 7 lines · Pavel Machek
Hi!
Quoted 4 lines · Thomas Gleixner
Quoted 3 lines · Pavel Machek
cd
/sys/devices/system/cpu/cpu1
while true; do echo 0 > online; echo 1 > online; done
Quoted 8 lines
Quoted 5 lines
Quoted 3 lines
...crashes x60 with 4.10-rc in few minutes. [Which is bad -- it should not die, but also good -- this is easier to reproduce then running 100 suspend cycles.]
Can you tell where it crashes?
I did not expect a crash, so I was in X... I have a feeling that this will be reproducible on a lot of hardware, but let me try.
FYI: Lockup reproduced with 4.10.0-rc7 with an X61s.
Caught a glimpse of something about an RCU stall timeout before the system shut off. Prior to that, during the loop execution, a bunch of systemd processes were experiencing watchdog timeouts, and procps top would start but never refresh, leaving the CPU column all "nan".
Regards,
Vito Caputo
Quoted 17 lines · On Mon, 13 Feb 2017, [email protected] wrote:
Quoted 7 lines · Pavel Machek
Hi!
Quoted 4 lines · Thomas Gleixner
Quoted 3 lines · Pavel Machek
cd
/sys/devices/system/cpu/cpu1
while true; do echo 0 > online; echo 1 > online; doneQuoted 8 lines
Quoted 5 lines
Quoted 3 lines
...crashes x60 with 4.10-rc in few minutes. [Which is bad -- it should not die, but also good -- this is easier to reproduce then running 100 suspend cycles.]
Can you tell where it crashes?
I did not expect a crash, so I was in X... I have a feeling that this will be reproducible on a lot of hardware, but let me try.
Quoted 6 lines
FYI: Lockup reproduced with 4.10.0-rc7 with an X61s.
Caught a glimpse of something about an RCU stall timeout before the system shut off. Prior to that, during the loop execution, a bunch of systemd processes were experiencing watchdog timeouts, and procps
topwould start but never refresh, leaving the CPU column all "nan".
Does the machine use intel_idle by chance?
Thanks,
tglx
Quoted 19 lines · Thomas Gleixner
Quoted 17 lines · On Mon, 13 Feb 2017, [email protected] wrote:
Quoted 15 lines · Pavel Machek
Hi!
Quoted 9 lines · Thomas Gleixner
Quoted 6 lines · Pavel Machek
cd
/sys/devices/system/cpu/cpu1
while true; do echo 0 > online; echo 1 > online; done...crashes x60 with 4.10-rc in few minutes. [Which is bad -- it should not die, but also good -- this is easier to reproduce then running 100 suspend cycles.]
Can you tell where it crashes?
I did not expect a crash, so I was in X... I have a feeling that this will be reproducible on a lot of hardware, but let me try.
Quoted 9 lines
Quoted 6 lines
FYI: Lockup reproduced with 4.10.0-rc7 with an X61s.
Caught a glimpse of something about an RCU stall timeout before the system shut off. Prior to that, during the loop execution, a bunch of systemd processes were experiencing watchdog timeouts, and procps
topwould start but never refresh, leaving the CPU column all "nan".Does the machine use
intel_idleby chance?
It's not enabled in my kernel, /proc/config.gz attached FWIW.
Regards,
Vito Caputo
Quoted 19 lines · Thomas Gleixner
Quoted 17 lines · On Mon, 13 Feb 2017, [email protected] wrote:
Quoted 15 lines · Pavel Machek
Hi!
Quoted 9 lines · Thomas Gleixner
Quoted 6 lines · Pavel Machek
cd
/sys/devices/system/cpu/cpu1
while true; do echo 0 > online; echo 1 > online; done...crashes x60 with 4.10-rc in few minutes. [Which is bad -- it should not die, but also good -- this is easier to reproduce then running 100 suspend cycles.]
Can you tell where it crashes?
I did not expect a crash, so I was in X... I have a feeling that this will be reproducible on a lot of hardware, but let me try.
Quoted 9 lines
Quoted 6 lines
FYI: Lockup reproduced with 4.10.0-rc7 with an X61s.
Caught a glimpse of something about an RCU stall timeout before the system shut off. Prior to that, during the loop execution, a bunch of systemd processes were experiencing watchdog timeouts, and procps
topwould start but never refresh, leaving the CPU column all "nan".Does the machine use
intel_idleby chance?
Config actually attached this time!
Regards,
Vito Caputo
Quoted 17 lines · On Mon 2017-02-13 04:18:51, [email protected] wrote:
Quoted 7 lines · Pavel Machek
Hi!
Quoted 4 lines · Thomas Gleixner
Quoted 3 lines · Pavel Machek
cd
/sys/devices/system/cpu/cpu1
while true; do echo 0 > online; echo 1 > online; doneQuoted 8 lines
Quoted 5 lines
Quoted 3 lines
...crashes x60 with 4.10-rc in few minutes. [Which is bad -- it should not die, but also good -- this is easier to reproduce then running 100 suspend cycles.]
Can you tell where it crashes?
I did not expect a crash, so I was in X... I have a feeling that this will be reproducible on a lot of hardware, but let me try.
Quoted 6 lines
FYI: Lockup reproduced with 4.10.0-rc7 with an X61s.
Caught a glimpse of something about an RCU stall timeout before the system shut off. Prior to that, during the loop execution, a bunch of systemd processes were experiencing watchdog timeouts, and procps
topwould start but never refresh, leaving the CPU column all "nan".
Hmm. I was not able to reproduce the lockup when I was running "while true" over ssh. Some weird stuff happened when I suspended machine with that loop running, but... I guess that was expected.
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html