iio: filter: admv8818: Bug fix and other improvements
Subsystems (3)
cover iio: filter: admv8818: Bug fix and other improvements
Fix a missing error code problem with Smatch, transition driver to use guard(), and resolve all checkpatch warnings.
Ethan Tidmore (3):
iio: filter: admv8818: Add missing error code
iio: filter: admv8818: Simplify locking with guard()
iio: filter: admv8818: Minor cleanups
drivers/iio/filter/admv8818.c | 69 ++++++++++++----------------------- 1 file changed, 24 insertions(+), 45 deletions(-)
Signature · 1 line
2.53.0
PATCH 1/3 iio: filter: admv8818: Add missing error code
If the macro FIELD_GET() returns an error code the function returns with 0 because ret was just confirmed to be 0 a few lines above.
Add error code.
Detected by Smatch:drivers/iio/filter/admv8818.c:335 __admv8818_read_hpf_freq() warn:
missing error code? 'ret'
drivers/iio/filter/admv8818.c:376 __admv8818_read_lpf_freq()
warn: missing error code? 'ret'
--- drivers/iio/filter/admv8818.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/iio/filter/admv8818.c +2 -2
@@ -332,7 +332,7 @@ static int __admv8818_read_hpf_freq(struct admv8818_state *st, u64 *hpf_freq) hpf_band =FIELD_GET (ADMV8818_SW_IN_WR0_MSK , data);if (!hpf_band || hpf_band >4 ) { *hpf_freq =0 ; -return ret; +return -EINVAL ; } ret =regmap_read (st->regmap,ADMV8818_REG_WR0_FILTER , &data);
@@ -373,7 +373,7 @@ static int __admv8818_read_lpf_freq(struct admv8818_state *st, u64 *lpf_freq) lpf_band =FIELD_GET (ADMV8818_SW_OUT_WR0_MSK , data);if (!lpf_band || lpf_band >4 ) { *lpf_freq =0 ; -return ret; +return -EINVAL ; } ret =regmap_read (st->regmap,ADMV8818_REG_WR0_FILTER , &data);
Signature · 1 line
2.53.0
Re: [PATCH 1/3] iio: filter: admv8818: Add missing error code
Quoted 9 lines · Ethan Tidmore
If the macro
FIELD_GET()returns an error code the function returns with 0 because ret was just confirmed to be 0 a few lines above.Add error code.
Detected by Smatch:
drivers/iio/filter/admv8818.c:335__admv8818_read_hpf_freq()warn:
missing error code? 'ret'
Quoted 6 lines
drivers/iio/filter/admv8818.c:376__admv8818_read_lpf_freq()
warn: missing error code? 'ret'Fixes f34fe888ad054 ("iio:filter:admv8818: add support for ADMV8818")Signed-off-by Ethan Tidmore <[email protected]>---
Just realized I should have used -EIO for the error code. Will wait however on reviews before v2.
Thanks,
ET
Re: [PATCH 1/3] iio: filter: admv8818: Add missing error code
Quoted 1 line · Ethan Tidmore
On Fri Feb 27, 2026 at 12:14 AM CST, Ethan Tidmore wrote:
...
Quoted 2 lines
Just realized I should have used
-EIOfor the error code. Will wait however on reviews before v2.
Why -EIO? Is it used in the same situation in other cases in this driver?
Signature · 2 lines
With Best Regards, Andy Shevchenko
David Lechner
reviewerRe: [PATCH 1/3] iio: filter: admv8818: Add missing error code
Quoted 10 lines · Andy Shevchenko
Quoted 1 line · Ethan Tidmore
On Fri Feb 27, 2026 at 12:14 AM CST, Ethan Tidmore wrote:
...
Quoted 2 lines
Just realized I should have used
-EIOfor the error code. Will wait however on reviews before v2.Why
-EIO? Is it used in the same situation in other cases in this driver?
I think EIO makes sense here. We are reading from a chip. And if the values we read aren't one of the expected values, the mostly likely reason is the chip is malfunctioning or noise on the wires.
Re: [PATCH 1/3] iio: filter: admv8818: Add missing error code
Quoted 3 lines · David Lechner
Quoted 2 lines · Andy Shevchenko
Quoted 1 line · Ethan Tidmore
On Fri Feb 27, 2026 at 12:14 AM CST, Ethan Tidmore wrote:
...
Quoted 8 lines
Quoted 4 lines
Quoted 2 lines
Just realized I should have used
-EIOfor the error code. Will wait however on reviews before v2.Why
-EIO? Is it used in the same situation in other cases in this driver?I think EIO makes sense here. We are reading from a chip. And if the values we read aren't one of the expected values, the mostly likely reason is the chip is malfunctioning or noise on the wires.
Makes sense, but needs to be properly spoken in the commit message.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Re: [PATCH 1/3] iio: filter: admv8818: Add missing error code
In reply to Ethan TidmoreQuoted 11 lines · Ethan Tidmore
If the macro
FIELD_GET()returns an error code the function returns with 0 because ret was just confirmed to be 0 a few lines above.Add error code.
Detected by Smatch:
drivers/iio/filter/admv8818.c:335__admv8818_read_hpf_freq()warn:
missing error code? 'ret'
drivers/iio/filter/admv8818.c:376__admv8818_read_lpf_freq()
warn: missing error code? 'ret'
...
drivers/iio/filter/admv8818.c static int __admv8818_read_hpf_freq(struct admv8818_state *st, u64 *hpf_freq) · line 335
Quoted 6 lines
drivers/iio/filter/admv8818.c +1
-1@@ -332,7 +332,7 @@ static int __admv8818_read_hpf_freq(struct admv8818_state *st, u64 *hpf_freq) hpf_band =FIELD_GET (ADMV8818_SW_IN_WR0_MSK , data);if (!hpf_band || hpf_band >4 ) { *hpf_freq =0 ; -return ret; +return -EINVAL ;
Looking at the nature of the check I would rather change the condition to use in_range() and respectively return -ERANGE.
Quoted 1 line
(quoted diff) +0
-0}
...
drivers/iio/filter/admv8818.c static int __admv8818_read_lpf_freq(struct admv8818_state *st, u64 *lpf_freq) · line 377
Quoted 6 lines
drivers/iio/filter/admv8818.c +1
-1lpf_band =FIELD_GET (ADMV8818_SW_OUT_WR0_MSK , data);if (!lpf_band || lpf_band >4 ) { *lpf_freq =0 ; -return ret; +return -EINVAL ; }
Ditto.
Signature · 2 lines
With Best Regards, Andy Shevchenko
David Lechner
reviewerRe: [PATCH 1/3] iio: filter: admv8818: Add missing error code
In reply to Ethan TidmoreQuoted 32 lines · Ethan Tidmore
If the macro
FIELD_GET()returns an error code the function returns with 0 because ret was just confirmed to be 0 a few lines above.Add error code.
Detected by Smatch:
drivers/iio/filter/admv8818.c:335__admv8818_read_hpf_freq()warn:
missing error code? 'ret'
drivers/iio/filter/admv8818.c:376__admv8818_read_lpf_freq()
warn: missing error code? 'ret'Fixes f34fe888ad054 ("iio:filter:admv8818: add support for ADMV8818")Signed-off-by Ethan Tidmore <[email protected]>--- drivers/iio/filter/admv8818.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)drivers/iio/filter/admv8818.c +1
-1@@ -332,7 +332,7 @@ static int __admv8818_read_hpf_freq(struct admv8818_state *st, u64 *hpf_freq) hpf_band =FIELD_GET (ADMV8818_SW_IN_WR0_MSK , data);if (!hpf_band || hpf_band >4 ) { *hpf_freq =0 ; -return ret; +return -EINVAL ; } ret =regmap_read (st->regmap,ADMV8818_REG_WR0_FILTER , &data);
drivers/iio/filter/admv8818.c static int __admv8818_read_lpf_freq(struct admv8818_state *st, u64 *lpf_freq) · line 379
Quoted 8 lines
drivers/iio/filter/admv8818.c +1
-1@@ -373,7 +373,7 @@ static int __admv8818_read_lpf_freq(struct admv8818_state *st, u64 *lpf_freq) lpf_band =FIELD_GET (ADMV8818_SW_OUT_WR0_MSK , data);if (!lpf_band || lpf_band >4 ) { *lpf_freq =0 ; -return ret; +return -EINVAL ; } ret =regmap_read (st->regmap,ADMV8818_REG_WR0_FILTER , &data);
Probably for a separate patch since this is considered a fix...
The returns at the end of these functions should be changed to return 0. It is the only possible value ret can have at that point.
PATCH 2/3 iio: filter: admv8818: Simplify locking with guard()
In reply to Ethan TidmoreUse guard() instead of manual locking to simplify code.
--- drivers/iio/filter/admv8818.c | 59 ++++++++++++----------------------- 1 file changed, 20 insertions(+), 39 deletions(-)
drivers/iio/filter/admv8818.c +20 -39
@@ -7,6 +7,7 @@#include <linux/bitfield.h> #include <linux/bits.h> +#include <linux/cleanup.h> #include <linux/clk.h> #include <linux/device.h> #include <linux/iio/iio.h>
@@ -205,13 +206,8 @@ static int __admv8818_hpf_select(struct admv8818_state *st, u64 freq)static int admv8818_hpf_select (struct admv8818_state *st,u64 freq) { -int ret; - -mutex_lock (&st->lock); - ret =__admv8818_hpf_select (st, freq); -mutex_unlock (&st->lock); - -return ret; +guard (mutex)(&st->lock); +return __admv8818_hpf_select (st, freq); }static int __admv8818_lpf_select (struct admv8818_state *st,u64 freq)
@@ -281,13 +277,8 @@ static int __admv8818_lpf_select(struct admv8818_state *st, u64 freq)static int admv8818_lpf_select (struct admv8818_state *st,u64 freq) { -int ret; - -mutex_lock (&st->lock); - ret =__admv8818_lpf_select (st, freq); -mutex_unlock (&st->lock); - -return ret; +guard (mutex)(&st->lock); +return __admv8818_lpf_select (st, freq); }static int admv8818_rfin_band_select (struct admv8818_state *st)
@@ -308,16 +299,17 @@ static int admv8818_rfin_band_select(struct admv8818_state *st)if (lpf_corner_target < st->cf_hz) lpf_corner_target =U64_MAX ; -mutex_lock (&st->lock); +guard (mutex)(&st->lock); ret =__admv8818_hpf_select (st, hpf_corner_target);if (ret) - goto exit; +return ret; ret =__admv8818_lpf_select (st, lpf_corner_target); -exit: -mutex_unlock (&st->lock); -return ret; +if (ret) +return ret; + +return 0 ; }static int __admv8818_read_hpf_freq (struct admv8818_state *st,u64 *hpf_freq)
@@ -352,13 +344,8 @@ static int __admv8818_read_hpf_freq(struct admv8818_state *st, u64 *hpf_freq)static int admv8818_read_hpf_freq (struct admv8818_state *st,u64 *hpf_freq) { -int ret; - -mutex_lock (&st->lock); - ret =__admv8818_read_hpf_freq (st, hpf_freq); -mutex_unlock (&st->lock); - -return ret; +guard (mutex)(&st->lock); +return __admv8818_read_hpf_freq (st, hpf_freq); }static int __admv8818_read_lpf_freq (struct admv8818_state *st,u64 *lpf_freq)
@@ -393,13 +380,8 @@ static int __admv8818_read_lpf_freq(struct admv8818_state *st, u64 *lpf_freq)static int admv8818_read_lpf_freq (struct admv8818_state *st,u64 *lpf_freq) { -int ret; - -mutex_lock (&st->lock); - ret =__admv8818_read_lpf_freq (st, lpf_freq); -mutex_unlock (&st->lock); - -return ret; +guard (mutex)(&st->lock); +return __admv8818_read_lpf_freq (st, lpf_freq); } static int admv8818_write_raw_get_fmt(struct iio_dev *indio_dev,
@@ -485,7 +467,7 @@ static int admv8818_filter_bypass(struct admv8818_state *st) {int ret; -mutex_lock (&st->lock); +guard (mutex)(&st->lock); ret = regmap_update_bits(st->regmap, ADMV8818_REG_WR0_SW, ADMV8818_SW_IN_SET_WR0_MSK |
@@ -497,18 +479,17 @@ static int admv8818_filter_bypass(struct admv8818_state *st)FIELD_PREP (ADMV8818_SW_OUT_SET_WR0_MSK ,1 ) | FIELD_PREP(ADMV8818_SW_OUT_WR0_MSK, 0));if (ret) - goto exit; +return ret; ret =regmap_update_bits (st->regmap,ADMV8818_REG_WR0_FILTER ,ADMV8818_HPF_WR0_MSK |ADMV8818_LPF_WR0_MSK ,FIELD_PREP (ADMV8818_HPF_WR0_MSK ,0 ) |FIELD_PREP (ADMV8818_LPF_WR0_MSK ,0 )); +if (ret) +return ret; -exit: -mutex_unlock (&st->lock); - -return ret; +return 0 ; } static int admv8818_get_mode(struct iio_dev *indio_dev,
Signature · 1 line
2.53.0
Re: [PATCH 2/3] iio: filter: admv8818: Simplify locking with guard()
Quoted 1 line · Ethan Tidmore
Use
guard()instead of manual locking to simplify code.
...
drivers/iio/filter/admv8818.c static int admv8818_rfin_band_select(struct admv8818_state *st) · line 312
Quoted 8 lines
drivers/iio/filter/admv8818.c +4
-3ret =__admv8818_lpf_select (st, lpf_corner_target); -exit: -mutex_unlock (&st->lock); -return ret; +if (ret) +return ret; + +return 0 ;
Why not
return __admv8818_lpf_select(...);
?
...
drivers/iio/filter/admv8818.c static int admv8818_filter_bypass(struct admv8818_state *st) · line 492
Quoted 13 lines
drivers/iio/filter/admv8818.c +3
-4ret =regmap_update_bits (st->regmap,ADMV8818_REG_WR0_FILTER ,ADMV8818_HPF_WR0_MSK |ADMV8818_LPF_WR0_MSK ,FIELD_PREP (ADMV8818_HPF_WR0_MSK ,0 ) |FIELD_PREP (ADMV8818_LPF_WR0_MSK ,0 )); +if (ret) +return ret; -exit: -mutex_unlock (&st->lock); - -return ret; +return 0 ;
In the similar way?
Signature · 2 lines
With Best Regards, Andy Shevchenko
David Lechner
reviewerRe: [PATCH 2/3] iio: filter: admv8818: Simplify locking with guard()
In reply to Ethan TidmoreQuoted 10 lines · Ethan Tidmore
Use
guard()instead of manual locking to simplify code.Signed-off-by Ethan Tidmore <[email protected]>---
drivers/iio/filter/admv8818.c +0
-0@@ -352,13 +344,8 @@ static int __admv8818_read_hpf_freq(struct admv8818_state *st, u64 *hpf_freq)static int admv8818_read_hpf_freq (struct admv8818_state *st,u64 *hpf_freq) {
drivers/iio/filter/admv8818.c static int __admv8818_read_hpf_freq(struct admv8818_state *st, u64 *hpf_freq) · line 349
Quoted 10 lines
drivers/iio/filter/admv8818.c +2
-7-int ret; - -mutex_lock (&st->lock); - ret =__admv8818_read_hpf_freq (st, hpf_freq); -mutex_unlock (&st->lock); - -return ret; +guard (mutex)(&st->lock); +return __admv8818_read_hpf_freq (st, hpf_freq); }
admv8818_read_hpf_freq() is the only caller of __admv8818_read_hpf_freq() so we can drop the wrapper, move the guard to __admv8818_read_hpf_freq() and rename it to admv8818_read_hpf_freq().
I didn't check all functions, but might be others places where we can do this as well.
Re: [PATCH 2/3] iio: filter: admv8818: Simplify locking with guard()
Quoted 26 lines · David Lechner
Quoted 10 lines · Ethan Tidmore
Use
guard()instead of manual locking to simplify code.Signed-off-by Ethan Tidmore <[email protected]>---
drivers/iio/filter/admv8818.c +0
-0@@ -352,13 +344,8 @@ static int __admv8818_read_hpf_freq(struct admv8818_state *st, u64 *hpf_freq)static int admv8818_read_hpf_freq (struct admv8818_state *st,u64 *hpf_freq) {drivers/iio/filter/admv8818.c static int __admv8818_read_hpf_freq(struct admv8818_state *st, u64 *hpf_freq) · line 349
Quoted 10 lines
drivers/iio/filter/admv8818.c +2
-7-int ret; - -mutex_lock (&st->lock); - ret =__admv8818_read_hpf_freq (st, hpf_freq); -mutex_unlock (&st->lock); - -return ret; +guard (mutex)(&st->lock); +return __admv8818_read_hpf_freq (st, hpf_freq); }
admv8818_read_hpf_freq()is the only caller of__admv8818_read_hpf_freq()so we can drop the wrapper, move the guard to__admv8818_read_hpf_freq()and rename it toadmv8818_read_hpf_freq().
Quoted 2 lines
I didn't check all functions, but might be others places where we can do this as well.
So this can be easily done with a few wrappers but these two functions have this odd scenario:
guard(mutex)(&st->lock); ret = __admv8818_hpf_select(st, hpf_corner_target); if (ret) return ret; return __admv8818_lpf_select(st, lpf_corner_target);
Where if I deleted that guard() and just made those hold the lock separately this would be a behaviour change. Wondering if there was a nice way to get around this?
Thanks,
ET
PATCH 3/3 iio: filter: admv8818: Minor cleanups
In reply to Ethan TidmoreResolve every checkpatch error in the driver.
--- drivers/iio/filter/admv8818.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/iio/filter/admv8818.c +2 -4
@@ -240,7 +240,6 @@ static int __admv8818_lpf_select(struct admv8818_state *st, u64 freq) freq_step =div_u64 (freq_step,ADMV8818_NUM_STATES -1 );for (state =ADMV8818_STATE_MAX ; state >=ADMV8818_STATE_MIN ; --state) { - freq_corner = freq_range_lpf[band][ADMV8818_BAND_CORNER_LOW ] + state * freq_step;
@@ -385,8 +384,8 @@ static int admv8818_read_lpf_freq(struct admv8818_state *st, u64 *lpf_freq) }static int admv8818_write_raw_get_fmt (struct iio_dev *indio_dev, -struct iio_chan_spec const *chan, -long mask) +struct iio_chan_spec const *chan, +long mask) {switch (mask) {case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY :
@@ -722,7 +721,6 @@ static int admv8818_read_properties(struct admv8818_state *st)else return ret; - ret =device_property_read_u32 (&spi->dev,"adi,hpf-margin-mhz" , &mhz);if (ret ==0 ) st->hpf_margin_hz = (u64 )mhz *HZ_PER_MHZ ;
Signature · 1 line
2.53.0
Re: [PATCH 3/3] iio: filter: admv8818: Minor cleanups
Quoted 1 line · Ethan Tidmore
Resolve every checkpatch error in the driver.
Poorly written commit message and Subject. Please, be more explicit:
Ex.:
iio: filter: ...: Fix indentation issues in a couple of places
Fix indentation issue of the parameters in admv8818_write_raw_get_fmt() and remove extra blank lines elsewhere.
Read this: https://chris.beams.io/git-commit
Signature · 2 lines
With Best Regards, Andy Shevchenko