swtpm tests question
Stone
I am trying, unsuccessfully, to see how the TPM_CC_Hash value 0x0000017D gets sent to the swtpm. Additionally, the _test_hashing script is sending the string "1234" to the swtpm and then verifies a twenty byte return, which is 160 bits, against the hash code "97 e9 76 e4 f2 2c d6 d2 4a fd 21 20 85 ad 7a 86 64 7f 2a e5" which does not appear to correspond to to any hash that I separately calculate. Nor do I see where the hashing algorithm to be used is sent to the swtpm (eg 0x0004 for sha1 or 0x000b for sha2.
I was hoping to use the existing tests as templates for new tests such as testing TPM_CC_GetRandom. I can't do that if I cannot find where the TPM_CC_Hash is specified or where the hashing algorithm to use is specified.
The _test_hashing code is
run_swtpm_ioctl ${SWTPM_INTERFACE} -h 1234
if [ $? -ne 0 ]; then
echo "Error: Hash command did not work."
exit 1
fi
# Read PCR 17Swtpm_open_cmddev ${SWTPM_INTERFACE} 100
RES=$(swtpm_cmd_tx ${SWTPM_INTERFACE} '\x00\xC1\x00\x00\x00\x0E\x00\x00\x00\x15\x00\x00\x00\x11') exp=' 00 c4 00 00 00 1e 00 00 00 00 97 e9 76 e4 f2 2c d6 d2 4a fd 21 20 85 ad 7a 86 64 7f 2a e5' if [ "$RES" != "$exp" ]; then
echo "Error: (1) Did not get expected result from TPM_PCRRead(17)"
echo "expected: $exp"
echo "received: $RES"
exit 1
fi
Any pointers will be appreciated. This is the first time I have attempted to use a tpm so the answer is probably something obvious that I am overlooking.
Thomas Stone, CISSP
Information Assurance Engineer Staff
Lockheed Martin Missiles and Fire Control
Phone (407) 356-6913
Cell (919) 812-0607
Email: thomas.g.stone(a)lmco.com<mailto:thomas.g.stone(a)lmco.com>
Roberts
That's a different project, I would reach out to that development community.
Bill
Quoted 82 lines
-----Original Message-----
From: tpm2 [mailto:tpm2-bounces(a)lists.01.org] On Behalf Of Stone, Thomas G
Sent: Wednesday, September 18, 2019 9:35 AM
To: tpm2(a)lists.01.org
Subject: [tpm2] swtpm tests questionI am trying, unsuccessfully, to see how the
TPM_CC_Hashvalue0x0000017Dgets
sent to the swtpm. Additionally, the_test_hashingscript is sending the string
"1234" to the swtpm and then verifies a twenty byte return, which is 160 bits, against the hash code "97 e9 76 e4 f2 2c d6 d2 4a fd 21 20 85 ad 7a 86 64 7f 2a e5" which does not appear to correspond to to any hash that I separately calculate. Nor do I see where the hashing algorithm to be used is sent to the swtpm (eg0x0004for sha1 or0x000bfor sha2.I was hoping to use the existing tests as templates for new tests such as testing
TPM_CC_GetRandom. I can't do that if I cannot find where theTPM_CC_Hashis specified or where the hashing algorithm to use is specified.The
_test_hashingcode is
run_swtpm_ioctl${SWTPM_INTERFACE} -h 1234if [ $? -ne 0 ]; then
echo "Error: Hash command did not work."
exit 1
fi
# Read PCR 17
Swtpm_open_cmddev${SWTPM_INTERFACE} 100RES=$(swtpm_cmd_tx ${SWTPM_INTERFACE} '\x00\xC1\x00\x00\x00\x0E\x00\x00\x00\x15\x00\x00\x00\x11')
exp=' 00 c4 00 00 00 1e 00 00 00 00 97 e9 76 e4 f2 2c d6 d2 4a fd 21 20 85 ad 7a 86 64 7f 2a e5'
if [ "$RES" != "$exp" ]; then
echo "Error: (1) Did not get expected result from
TPM_PCRRead(17)"echo "expected: $exp"
echo "received: $RES"
exit 1
fi
Any pointers will be appreciated. This is the first time I have attempted to use a tpm so the answer is probably something obvious that I am overlooking.
Thomas Stone, CISSP
Information Assurance Engineer Staff
Lockheed Martin Missiles and Fire Control
Phone (407) 356-6913
Cell (919) 812-0607
Email: thomas.g.stone(a)lmco.com <mailto:thomas.g.stone(a)lmco.com>
Tricca
Hi Thomas,
Some additional data:
Stefan Berger maintains the swtpm here: https://github.com/stefanberger/swtpm. This question may be more related to libtpms (https://github.com/stefanberger/libtpms) than swtpm though. Microsoft maintains the TPM2 reference code here: https://github.com/microsoft/ms-tpm-20-ref.
NOTE: the reference code from MS is re-packaged by Stefan in libtpms.
I don't believe either of these projects have a dedicated mailing list but (as Bill points out below) I doubt that they monitor this one for questions.
Good luck,
Philip
-----Original Message-----
From: tpm2 [mailto:tpm2-bounces(a)lists.01.org] On Behalf Of Roberts, William C
Sent: 19 September, 2019 07:34
To: Stone, Thomas G <thomas.g.stone(a)lmco.com>; tpm2(a)lists.01.org
Subject: Re: [tpm2] swtpm tests question
That's a different project, I would reach out to that development community.
Bill
Quoted 73 lines
-----Original Message-----
From: tpm2 [mailto:tpm2-bounces(a)lists.01.org] On Behalf Of Stone, Thomas G
Sent: Wednesday, September 18, 2019 9:35 AM
To: tpm2(a)lists.01.org
Subject: [tpm2] swtpm tests questionI am trying, unsuccessfully, to see how the
TPM_CC_Hashvalue0x0000017Dgets
sent to the swtpm. Additionally, the_test_hashingscript is sending the string
"1234" to the swtpm and then verifies a twenty byte return, which is
160 bits, against the hash code "97 e9 76 e4 f2 2c d6 d2 4a fd 21 20 85 ad 7a 86 64 7f 2a e5" which does not appear to correspond to to any hash that I separately calculate. Nor do I see where the hashing algorithm to be used is sent to the
swtpm (eg0x0004for sha1 or0x000bfor sha2.I was hoping to use the existing tests as templates for new tests such as testing
TPM_CC_GetRandom. I can't do that if I cannot find where theTPM_CC_Hashis specified or where the hashing algorithm to use is specified.The
_test_hashingcode is
run_swtpm_ioctl${SWTPM_INTERFACE} -h 1234if [ $? -ne 0 ]; then
echo "Error: Hash command did not work."
exit 1
fi
# Read PCR 17
Swtpm_open_cmddev${SWTPM_INTERFACE} 100RES=$(swtpm_cmd_tx ${SWTPM_INTERFACE} '\x00\xC1\x00\x00\x00\x0E\x00\x00\x00\x15\x00\x00\x00\x11')
exp=' 00 c4 00 00 00 1e 00 00 00 00 97 e9 76 e4 f2 2c d6 d2 4a fd 21 20 85 ad 7a 86 64 7f 2a e5'
if [ "$RES" != "$exp" ]; then
echo "Error: (1) Did not get expected result from
TPM_PCRRead(17)"echo "expected: $exp"
echo "received: $RES"
exit 1
fi
Any pointers will be appreciated. This is the first time I have
attempted to use a tpm so the answer is probably something obvious that I am overlooking.Thomas Stone, CISSP
Information Assurance Engineer Staff
Quoted 11 lines
Lockheed Martin Missiles and Fire Control
Phone (407) 356-6913
Cell (919) 812-0607
Email: thomas.g.stone(a)lmco.com <mailto:thomas.g.stone(a)lmco.com>
_______________________________________________
tpm2 mailing list
tpm2(a)lists.01.org
https://lists.01.org/mailman/listinfo/tpm2
Roberts
Quoted 9 lines
-----Original Message-----
From: Tricca, Philip B
Sent: Thursday, September 19, 2019 8:47 AM
To: Stone, Thomas G <thomas.g.stone(a)lmco.com>; tpm2(a)lists.01.org
Cc: Roberts, William C <william.c.roberts(a)intel.com>
Subject: RE: swtpm tests question
Quoted 6 lines
Hi Thomas,
Some additional data:
Stefan Berger maintains the swtpm here:
https://github.com/stefanberger/swtpm. This question may be more related to libtpms (https://github.com/stefanberger/libtpms) than swtpm though.
I wasn't 100% sure if that was upstream for that, good to know. AFAICT, they have no mailing list but they are active on issues. So perhaps file a github issue on that project.
Quoted 114 lines
Microsoft maintains the TPM2 reference code here:
https://github.com/microsoft/ms-tpm-20-ref.NOTE: the reference code from MS is re-packaged by Stefan in libtpms.
I don't believe either of these projects have a dedicated mailing list but (as Bill points out below) I doubt that they monitor this one for questions.
Good luck,
Philip-----Original Message-----
From: tpm2 [mailto:tpm2-bounces(a)lists.01.org] On Behalf Of Roberts, William C
Sent: 19 September, 2019 07:34
To: Stone, Thomas G <thomas.g.stone(a)lmco.com>; tpm2(a)lists.01.org
Subject: Re: [tpm2] swtpm tests questionThat's a different project, I would reach out to that development community.
Bill
Quoted 8 lines
-----Original Message-----
From: tpm2 [mailto:tpm2-bounces(a)lists.01.org] On Behalf Of Stone, Thomas G
Sent: Wednesday, September 18, 2019 9:35 AM
To: tpm2(a)lists.01.org
Subject: [tpm2] swtpm tests questionI am trying, unsuccessfully, to see how the
TPM_CC_Hashvalue0x0000017Dgets
Quoted 3 lines
sent to the swtpm. Additionally, the
_test_hashingscript is sending the string
"1234" to the swtpm and then verifies a twenty byte return, which is 160 bits, against the hash code "97 e9 76 e4 f2 2c d6 d2 4a fd 21 20 85 ad 7a 86 647f 2a e5"
Quoted 10 lines
which does not appear to correspond to to any hash that I separately calculate. Nor do I see where the hashing algorithm to be used is sent to the swtpm (eg
0x0004for sha1 or0x000bfor sha2.I was hoping to use the existing tests as templates for new tests such as testing
TPM_CC_GetRandom. I can't do that if I cannot find where theTPM_CC_Hashis specified or where the hashing algorithm to use isspecified.
Quoted 37 lines
The
_test_hashingcode is
run_swtpm_ioctl${SWTPM_INTERFACE} -h 1234if [ $? -ne 0 ]; then
echo "Error: Hash command did not work."
exit 1
fi
# Read PCR 17
Swtpm_open_cmddev${SWTPM_INTERFACE} 100RES=$(swtpm_cmd_tx ${SWTPM_INTERFACE} '\x00\xC1\x00\x00\x00\x0E\x00\x00\x00\x15\x00\x00\x00\x11')
exp=' 00 c4 00 00 00 1e 00 00 00 00 97 e9 76 e4 f2 2c d6 d2 4a fd 21 20 85 ad 7a 86 64 7f 2a e5'
if [ "$RES" != "$exp" ]; then
echo "Error: (1) Did not get expected result from
TPM_PCRRead(17)"echo "expected: $exp"
echo "received: $RES"
Quoted 8 lines
exit 1
fi
Any pointers will be appreciated. This is the first time I have attempted to use a tpm so the answer is probably something obvious that I am
overlooking.
Quoted 7 lines
Thomas Stone, CISSP
Information Assurance Engineer Staff
Quoted 11 lines
Lockheed Martin Missiles and Fire Control
Phone (407) 356-6913
Cell (919) 812-0607
Email: thomas.g.stone(a)lmco.com <mailto:thomas.g.stone(a)lmco.com>
_______________________________________________
tpm2 mailing list
tpm2(a)lists.01.org
https://lists.01.org/mailman/listinfo/tpm2