WHPX support for Arm
Subsystems (2)
v12 cover WHPX support for Arm
Link to branch: https://github.com/mediouni-m/qemu whpx (tag for this submission: whpx-v12)
Missing features:
- VM save-restore: interrupt controller state notably
- SVE register sync: I didn't have the time to test this on pre-release hardware with SVE2 support yet. So SVE2 is currently masked for VMs when running this.
Known bugs:
- U-Boot still doesn't work (hangs when trying to parse firmware) but EDK2 does.
Note:
"target/arm/kvm: add constants for new PSCI versions" taken from the mailing list.
"accel/system: Introduce hwaccel_enabled() helper" taken from the mailing list, added here as part of this series to make it compilable as a whole.
"hw/arm: virt: add GICv2m for the case when ITS is not available" present in both the HVF vGIC and this series.
"hw: arm: virt-acpi-build: add temporary hack to match existing behavior" is not proper" is for ACPI stability but what is the right approach to follow there?
And another note:
Seems that unlike HVF there isn't direct correspondence between WHv registers and the actual register layout, so didn't do changes there to a sysreg.inc.
Updates since v11:
- Address review comments
- Rebase up to latest staging
- Switch to assuming Qemu 11.0 as the newest machine model
Updates since v10:
- Bring forward to latest Qemu
- Fix a typo in the GICv3+GICv2m PR
Updates since v9:
- Adding partition reset on the reboot side of things...
Updates since v8:
- v9 and v8 were not submitted properly because of my MTA not behaving, sorry for that.
- v10 introduces a new argument, -M msi=, to handle MSI-X configuration more granularly.
- That surfaced what I think is a bug (?), with vms->its=1 on GICv2 configurations... or I did understand everything wrong.
- Oopsie due to email provider ratelimiting.
Updates since v7:
- Oops, fixing bug in "hw/arm: virt: cleanly fail on attempt to use the platform vGIC together with ITS". Other commits are unchanged.
Updates since v6:
- Rebasing
- Fixing a bug in the GICv3+GICv2m case for ACPI table generation
- getting rid of the slots infrastructure for memory management
- Place the docs commit right after the "cleanly fail on attempt to run GICv3+GICv2m on an unsupported config" one as that's what switches ITS to a tristate.
- Fixing a build issue when getting rid of the arch-specific arm64 hvf-stub.
Updates since v5:
- Rebasing
- Address review comments
- Rework ITS enablement to a tristate
- On x86: move away from deprecated APIs to get/set APIC state
Updates since v4:
- Taking into account review comments
- Add migration blocker in the vGICv3 code due to missing interrupt controller save/restore
- Debug register sync
Updates since v3:
- Disabling SVE on WHPX
- Taking into account review comments incl:
- fixing x86 support
- reduce the amount of __x86_64__ checks in common code to the minimum (winhvemulation) which can be reduced even further down the road.
- generalize get_physical_address_range into something common between hvf and whpx
Updates since v2:
- Fixed up a rebase screwup for whpx-internal.h
- Fixed ID_AA64ISAR1_EL1 and ID_AA64ISAR2_EL1 feature probe for -cpu host
- Switched to ID_AA64PFR1_EL1/ID_AA64DFR0_EL1 instead of their non-AA64 variant
Updates since v1:
- Shutdowns and reboots
- MPIDR_EL1 register sync
- Fixing GICD_TYPER_LPIS value
- IPA size clamping
- -cpu host now implemented
Mohamed Mediouni (26):
qtest: hw/arm: virt: skip ACPI test for ITS off
hw/arm: virt: add GICv2m for the case when ITS is not available
tests: data: update AArch64 ACPI tables
hw/arm: virt: cleanly fail on attempt to use the platform vGIC
together with ITS
hw: arm: virt: rework MSI-X configuration
hw: arm: virt-acpi-build: add temporary hack to match existing
behavior
docs: arm: update virt machine model description
whpx: Move around files before introducing AArch64 support
whpx: reshuffle common code
whpx: ifdef out winhvemulation on non-x86_64
whpx: common: add WHPX_INTERCEPT_DEBUG_TRAPS define
hw, target, accel: whpx: change apic_in_platform to kernel_irqchip
whpx: interrupt controller support
whpx: add arm64 support
whpx: change memory management logic
target/arm: cpu: mark WHPX as supporting PSCI 1.3
whpx: arm64: clamp down IPA size
hw/arm, accel/hvf, whpx: unify get_physical_address_range between WHPX
and HVF
whpx: arm64: implement -cpu host
target/arm: whpx: instantiate GIC early
whpx: arm64: gicv3: add migration blocker
whpx: enable arm64 builds
whpx: apic: use non-deprecated APIs to control interrupt controller
state
whpx: arm64: check for physical address width after WHPX availability
whpx: arm64: add partition-wide reset on the reboot path
MAINTAINERS: update the list of maintained files for WHPX
Philippe Mathieu-Daudé (1):
accel/system: Introduce hwaccel_enabled() helper
Sebastian Ott (1):
target/arm/kvm: add constants for new PSCI versions
MAINTAINERS | 6 +
accel/hvf/hvf-all.c | 7 +-
accel/meson.build | 1 +
accel/stubs/whpx-stub.c | 1 +
accel/whpx/meson.build | 7 +
{target/i386 => accel}/whpx/whpx-accel-ops.c | 6 +-
accel/whpx/whpx-common.c | 540 +++++++++
docs/system/arm/virt.rst | 13 +-
hw/arm/virt-acpi-build.c | 16 +-
hw/arm/virt.c | 140 ++-
hw/i386/x86-cpu.c | 4 +-
hw/intc/arm_gicv3_common.c | 3 +
hw/intc/arm_gicv3_whpx.c | 249 ++++
hw/intc/meson.build | 1 +
include/hw/arm/virt.h | 8 +-
include/hw/core/boards.h | 3 +-
include/hw/intc/arm_gicv3_common.h | 3 +
include/system/hvf_int.h | 5 +
include/system/hw_accel.h | 13 +
.../whpx => include/system}/whpx-accel-ops.h | 4 +-
include/system/whpx-all.h | 20 +
include/system/whpx-common.h | 26 +
.../whpx => include/system}/whpx-internal.h | 25 +-
include/system/whpx.h | 5 +-
meson.build | 20 +-
target/arm/cpu.c | 3 +
target/arm/cpu64.c | 17 +-
target/arm/hvf-stub.c | 20 -
target/arm/hvf/hvf.c | 6 +-
target/arm/hvf_arm.h | 3 -
target/arm/kvm-consts.h | 2 +
target/arm/meson.build | 2 +-
target/arm/whpx/meson.build | 5 +
target/arm/whpx/whpx-all.c | 1020 +++++++++++++++++
target/arm/whpx/whpx-stub.c | 15 +
target/arm/whpx_arm.h | 17 +
target/i386/cpu-apic.c | 2 +-
target/i386/hvf/hvf.c | 11 +
target/i386/whpx/meson.build | 1 -
target/i386/whpx/whpx-all.c | 569 +--------
target/i386/whpx/whpx-apic.c | 48 +-
tests/data/acpi/aarch64/virt/APIC.its_off | Bin 164 -> 188 bytes
42 files changed, 2219 insertions(+), 648 deletions(-)
create mode 100644 accel/whpx/meson.build
rename {target/i386 => accel}/whpx/whpx-accel-ops.c (96%)
create mode 100644 accel/whpx/whpx-common.c
create mode 100644 hw/intc/arm_gicv3_whpx.c
rename {target/i386/whpx => include/system}/whpx-accel-ops.h (92%)
create mode 100644 include/system/whpx-all.h
create mode 100644 include/system/whpx-common.h
rename {target/i386/whpx => include/system}/whpx-internal.h (88%)
delete mode 100644 target/arm/hvf-stub.c
create mode 100644 target/arm/whpx/meson.build
create mode 100644 target/arm/whpx/whpx-all.c
create mode 100644 target/arm/whpx/whpx-stub.c
create mode 100644 target/arm/whpx_arm.hSignature · 1 line
2.50.1 (Apple Git-155)
PATCH v12 1/28 target/arm/kvm: add constants for new PSCI versions
From: Sebastian Ott <[email protected]>
Add constants for PSCI version 1_2 and 1_3.
--- target/arm/kvm-consts.h | 2 ++ 1 file changed, 2 insertions(+)
target/arm/kvm-consts.h +2 -0
@@ -97,6 +97,8 @@ MISMATCH_CHECK(QEMU_PSCI_1_0_FN_PSCI_FEATURES, PSCI_1_0_FN_PSCI_FEATURES);#define QEMU_PSCI_VERSION_0_2 0x00002#define QEMU_PSCI_VERSION_1_0 0x10000#define QEMU_PSCI_VERSION_1_1 0x10001 +#define QEMU_PSCI_VERSION_1_2 0x10002 +#define QEMU_PSCI_VERSION_1_3 0x10003MISMATCH_CHECK (QEMU_PSCI_0_2_RET_TOS_MIGRATION_NOT_REQUIRED ,PSCI_0_2_TOS_MP );/* We don't bother to check every possible version value */
Signature · 1 line
2.50.1 (Apple Git-155)
PATCH v12 2/28 accel/system: Introduce hwaccel_enabled() helper
In reply to Mohamed MediouniFrom: Philippe Mathieu-Daudé <[email protected]>
hwaccel_enabled() return whether any hardware accelerator is enabled.
--- include/system/hw_accel.h | 13 +++++++++++++ 1 file changed, 13 insertions(+)
include/system/hw_accel.h +13 -0
@@ -40,4 +40,17 @@ void cpu_synchronize_pre_loadvm(CPUState *cpu);void cpu_synchronize_post_reset (CPUState *cpu);void cpu_synchronize_post_init (CPUState *cpu); +/** +* hwaccel_enabled: +* +* Returns: %true if a hardware accelerator is enabled, %false otherwise. +*/ +static inline bool hwaccel_enabled (void ) +{ +return hvf_enabled () + ||kvm_enabled () + ||nvmm_enabled () + ||whpx_enabled (); +} +#endif /* QEMU_HW_ACCEL_H */
Signature · 1 line
2.50.1 (Apple Git-155)
Re: [PATCH v12 02/28] accel/system: Introduce hwaccel_enabled() helper
Quoted 10 lines · Mohamed Mediouni
From: Philippe Mathieu-Daudé <[email protected]>
hwaccel_enabled()return whether any hardware accelerator is enabled.Signed-off-by Philippe Mathieu-Daudé <[email protected]>Reviewed-by Richard Henderson <[email protected]>--- include/system/hw_accel.h | 13 +++++++++++++ 1 file changed, 13 insertions(+)
PATCH v12 3/28 qtest: hw/arm: virt: skip ACPI test for ITS off
In reply to Mohamed Mediouni--- tests/qtest/bios-tables-test-allowed-diff.h | 1 + 1 file changed, 1 insertion(+)
tests/qtest/bios-tables-test-allowed-diff.h +1 -0
@@ -1 +1,2 @@/* List of comma-separated changed AML files to ignore */ +"tests/data/acpi/aarch64/virt/APIC.its_off",
Signature · 1 line
2.50.1 (Apple Git-155)
PATCH v12 4/28 hw/arm: virt: add GICv2m for the case when ITS is not available
In reply to Mohamed MediouniOn Hypervisor.framework for macOS and WHPX for Windows, the provided environment is a GICv3 without ITS.
As such, support a GICv3 w/ GICv2m for that scenario.
--- hw/arm/virt-acpi-build.c | 4 +++- hw/arm/virt.c | 16 +++++++++++++++- include/hw/arm/virt.h | 2 ++ 3 files changed, 20 insertions(+), 2 deletions(-)
hw/arm/virt-acpi-build.c +3 -1
@@ -960,7 +960,9 @@ build_madt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)build_append_int_noprefix (table_data, memmap[VIRT_GIC_ITS ].base,8 );build_append_int_noprefix (table_data,0 ,4 );/* Reserved */ } - }else { + } + +if (!(vms->gic_version !=VIRT_GIC_VERSION_2 && vms->its) && !vms->no_gicv3_with_gicv2m) {const uint16_t spi_base = vms->irqmap[VIRT_GIC_V2M ] +ARM_SPI_BASE ;/* 5.2.12.16 GIC MSI Frame Structure */
hw/arm/virt.c +15 -1
@@ -959,6 +959,8 @@ static void create_gic(VirtMachineState *vms, MemoryRegion *mem)if (vms->gic_version !=VIRT_GIC_VERSION_2 && vms->its) {create_its (vms); + }else if (vms->gic_version !=VIRT_GIC_VERSION_2 && !vms->no_gicv3_with_gicv2m) { +create_v2m (vms); }else if (vms->gic_version ==VIRT_GIC_VERSION_2 ) {create_v2m (vms); }
@@ -2444,6 +2446,8 @@ static void machvirt_init(MachineState *machine) vms->ns_el2_virt_timer_irq =ns_el2_virt_timer_present () && !vmc->no_ns_el2_virt_timer_irq; + vms->no_gicv3_with_gicv2m = vmc->no_gicv3_with_gicv2m; +fdt_add_timer_nodes (vms);fdt_add_cpu_nodes (vms);
@@ -3488,6 +3492,7 @@ static void virt_instance_init(Object *obj) vms->its = true;/* Allow ITS emulation if the machine version supports it */ vms->tcg_its = !vmc->no_tcg_its; + vms->no_gicv3_with_gicv2m = false;/* Default disallows iommu instantiation */ vms->iommu =VIRT_IOMMU_NONE ;
@@ -3533,10 +3538,19 @@ static void machvirt_machine_init(void) }type_init (machvirt_machine_init); +static void virt_machine_11_0_options (MachineClass *mc) +{ +} +DEFINE_VIRT_MACHINE_AS_LATEST(11, 0) +static void virt_machine_10_2_options (MachineClass *mc) { +VirtMachineClass *vmc =VIRT_MACHINE_CLASS (OBJECT_CLASS (mc)); + + vmc->no_gicv3_with_gicv2m = true; +virt_machine_11_0_options (mc); } -DEFINE_VIRT_MACHINE_AS_LATEST(10, 2) +DEFINE_VIRT_MACHINE(10, 2)static void virt_machine_10_1_options (MachineClass *mc) {
include/hw/arm/virt.h +2 -0
@@ -130,6 +130,7 @@ struct VirtMachineClass {bool no_cpu_topology;bool no_tcg_lpa2;bool no_ns_el2_virt_timer_irq; +bool no_gicv3_with_gicv2m;bool no_nested_smmu; };
@@ -178,6 +179,7 @@ struct VirtMachineState {char *oem_id;char *oem_table_id;bool ns_el2_virt_timer_irq; +bool no_gicv3_with_gicv2m;CXLState cxl_devices_state;bool legacy_smmuv3_present; };
Signature · 1 line
2.50.1 (Apple Git-155)
Re: [PATCH v12 04/28] hw/arm: virt: add GICv2m for the case when ITS is not available
Quoted 18 lines · Mohamed Mediouni
On Hypervisor.framework for macOS and WHPX for Windows, the provided environment is a GICv3 without ITS.
As such, support a GICv3 w/ GICv2m for that scenario.
Signed-off-by Mohamed Mediouni <[email protected]>Reviewed-by Pierrick Bouvier <[email protected]>--- hw/arm/virt-acpi-build.c | 4 +++- hw/arm/virt.c | 16 +++++++++++++++- include/hw/arm/virt.h | 2 ++ 3 files changed, 20 insertions(+), 2 deletions(-)hw/arm/virt-acpi-build.c +0
-0
hw/arm/virt-acpi-build.c build_madt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) · line 965
Quoted 7 lines
hw/arm/virt-acpi-build.c +3
-1@@ -960,7 +960,9 @@ build_madt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)build_append_int_noprefix (table_data, memmap[VIRT_GIC_ITS ].base,8 );build_append_int_noprefix (table_data,0 ,4 );/* Reserved */ } - }else { + } + +if (!(vms->gic_version !=VIRT_GIC_VERSION_2 && vms->its) && !vms->no_gicv3_with_gicv2m) {
check patch reports:
ERROR: line over 90 characters
#31: FILE: hw/arm/virt-acpi-build.c:965:
+ if (!(vms->gic_version != VIRT_GIC_VERSION_2 && vms->its) && !vms->no_gicv3_with_gicv2m) {
Quoted 74 lines
hw/arm/virt-acpi-build.c +0
-0const uint16_t spi_base = vms->irqmap[VIRT_GIC_V2M ] +ARM_SPI_BASE ;/* 5.2.12.16 GIC MSI Frame Structure */ hw/arm/virt.c +15
-1@@ -959,6 +959,8 @@ static void create_gic(VirtMachineState *vms, MemoryRegion *mem)if (vms->gic_version !=VIRT_GIC_VERSION_2 && vms->its) {create_its (vms); + }else if (vms->gic_version !=VIRT_GIC_VERSION_2 && !vms->no_gicv3_with_gicv2m) { +create_v2m (vms); }else if (vms->gic_version ==VIRT_GIC_VERSION_2 ) {create_v2m (vms); }@@ -2444,6 +2446,8 @@ static void machvirt_init(MachineState *machine) vms->ns_el2_virt_timer_irq =ns_el2_virt_timer_present () && !vmc->no_ns_el2_virt_timer_irq; + vms->no_gicv3_with_gicv2m = vmc->no_gicv3_with_gicv2m; +fdt_add_timer_nodes (vms);fdt_add_cpu_nodes (vms);@@ -3488,6 +3492,7 @@ static void virt_instance_init(Object *obj) vms->its = true;/* Allow ITS emulation if the machine version supports it */ vms->tcg_its = !vmc->no_tcg_its; + vms->no_gicv3_with_gicv2m = false;/* Default disallows iommu instantiation */ vms->iommu =VIRT_IOMMU_NONE ;@@ -3533,10 +3538,19 @@ static void machvirt_machine_init(void) }type_init (machvirt_machine_init); +static void virt_machine_11_0_options (MachineClass *mc) +{ +} +DEFINE_VIRT_MACHINE_AS_LATEST(11, 0) +static void virt_machine_10_2_options (MachineClass *mc) { +VirtMachineClass *vmc =VIRT_MACHINE_CLASS (OBJECT_CLASS (mc)); + + vmc->no_gicv3_with_gicv2m = true; +virt_machine_11_0_options (mc); } -DEFINE_VIRT_MACHINE_AS_LATEST(10, 2) +DEFINE_VIRT_MACHINE(10, 2)static void virt_machine_10_1_options (MachineClass *mc) {include/hw/arm/virt.h +2
-0@@ -130,6 +130,7 @@ struct VirtMachineClass {bool no_cpu_topology;bool no_tcg_lpa2;bool no_ns_el2_virt_timer_irq; +bool no_gicv3_with_gicv2m;bool no_nested_smmu; };@@ -178,6 +179,7 @@ struct VirtMachineState {char *oem_id;char *oem_table_id;bool ns_el2_virt_timer_irq; +bool no_gicv3_with_gicv2m;CXLState cxl_devices_state;bool legacy_smmuv3_present; };
PATCH v12 5/28 tests: data: update AArch64 ACPI tables
In reply to Mohamed MediouniAfter the previous commit introducing GICv3 + GICv2m configurations, update the AArch64 ACPI table for the its=off case.
--- tests/data/acpi/aarch64/virt/APIC.its_off | Bin 164 -> 188 bytes tests/qtest/bios-tables-test-allowed-diff.h | 1 - 2 files changed, 1 deletion(-)
tests/data/acpi/aarch64/virt/APIC.its_off binary +0 -0
tests/qtest/bios-tables-test-allowed-diff.h +0 -1
@@ -1,2 +1 @@/* List of comma-separated changed AML files to ignore */ -"tests/data/acpi/aarch64/virt/APIC.its_off",
Signature · 1 line
2.50.1 (Apple Git-155)
Re: [PATCH v12 05/28] tests: data: update AArch64 ACPI tables
Quoted 8 lines · Mohamed Mediouni
After the previous commit introducing GICv3 + GICv2m configurations, update the AArch64 ACPI table for the its=off case.
Signed-off-by Mohamed Mediouni <[email protected]>--- tests/data/acpi/aarch64/virt/APIC.its_off | Bin 164 -> 188 bytes tests/qtest/bios-tables-test-allowed-diff.h | 1 - 2 files changed, 1 deletion(-)
PATCH v12 6/28 hw/arm: virt: cleanly fail on attempt to use the platform vGIC together with ITS
In reply to Mohamed MediouniSwitch its to a tristate.
Windows Hypervisor Platform's vGIC doesn't support ITS. Deal with this by reporting to the user and exiting.
Regular configuration: GICv3 + ITS
New default configuration with WHPX: GICv3 with GICv2m
And its=off explicitly for the newest machine version: GICv3 + GICv2m
--- hw/arm/virt-acpi-build.c | 15 +++++++------ hw/arm/virt.c | 46 +++++++++++++++++++++++++++++++--------- include/hw/arm/virt.h | 4 +++- 3 files changed, 47 insertions(+), 18 deletions(-)
hw/arm/virt-acpi-build.c +8 -7
@@ -473,7 +473,7 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) nb_nodes = num_smmus +1 ;/* RC and SMMUv3 */ rc_mapping_count = rc_smmu_idmaps_len; -if (vms->its) { +if (virt_is_its_enabled (vms)) {/* * Knowing the ID ranges from the RC to the SMMU, it's possible to * determine the ID ranges from RC that go directly to ITS.
@@ -484,7 +484,7 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) rc_mapping_count += rc_its_idmaps->len; } }else { -if (vms->its) { +if (virt_is_its_enabled (vms)) { nb_nodes =2 ;/* RC and ITS */ rc_mapping_count =1 ;/* Direct map to ITS */ }else {
@@ -499,7 +499,7 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)build_append_int_noprefix (table_data,IORT_NODE_OFFSET ,4 );build_append_int_noprefix (table_data,0 ,4 );/* Reserved */ -if (vms->its) { +if (virt_is_its_enabled (vms)) {/* Table 12 ITS Group Format */ build_append_int_noprefix (table_data,0 /* ITS Group */ ,1 );/* Type */ node_size =20 /* fixed header size */ +4 /* 1 GIC ITS Identifier */ ;
@@ -518,7 +518,7 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)int smmu_mapping_count, offset_to_id_array;int irq = sdev->irq; -if (vms->its) { +if (virt_is_its_enabled (vms)) { smmu_mapping_count =1 ;/* ITS Group node */ offset_to_id_array =SMMU_V3_ENTRY_SIZE ;/* Just after the header */ }else {
@@ -611,7 +611,7 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) } } -if (vms->its) { +if (virt_is_its_enabled (vms)) {/* * Map bypassed (don't go through the SMMU) RIDs (input) to * ITS Group node directly: RC -> ITS.
@@ -946,7 +946,7 @@ build_madt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) memmap[VIRT_HIGH_GIC_REDIST2].size); } -if (vms->its) { +if (virt_is_its_enabled (vms)) {/* * ACPI spec, Revision 6.0 Errata A * (original 6.0 definition has invalid Length)
@@ -962,7 +962,8 @@ build_madt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) } } -if (!(vms->gic_version !=VIRT_GIC_VERSION_2 && vms->its) && !vms->no_gicv3_with_gicv2m) { +if (!(vms->gic_version !=VIRT_GIC_VERSION_2 &&virt_is_its_enabled (vms)) + && !vms->no_gicv3_with_gicv2m) {const uint16_t spi_base = vms->irqmap[VIRT_GIC_V2M ] +ARM_SPI_BASE ;/* 5.2.12.16 GIC MSI Frame Structure */
hw/arm/virt.c +36 -10
90 lines not on this page · raw message
include/hw/arm/virt.h +3 -1
@@ -147,7 +147,7 @@ struct VirtMachineState {bool highmem_ecam;bool highmem_mmio;bool highmem_redists; -bool its; +OnOffAuto its;bool tcg_its;bool virt;bool ras;
@@ -216,4 +216,6 @@ static inline int virt_gicv3_redist_region_count(VirtMachineState *vms) vms->highmem_redists) ? 2 : 1; } +bool virt_is_its_enabled (VirtMachineState *vms); +#endif /* QEMU_ARM_VIRT_H */
Signature · 1 line
2.50.1 (Apple Git-155)
Re: [PATCH v12 06/28] hw/arm: virt: cleanly fail on attempt to use the platform vGIC together with ITS
Quoted 9 lines · Mohamed Mediouni
Switch its to a tristate.
Windows Hypervisor Platform's vGIC doesn't support ITS. Deal with this by reporting to the user and exiting.
Regular configuration: GICv3 + ITS
New default configuration with WHPX: GICv3 with GICv2m
And its=off explicitly for the newest machine version: GICv3 + GICv2m
Quoted 6 lines
Signed-off-by Mohamed Mediouni <[email protected]>--- hw/arm/virt-acpi-build.c | 15 +++++++------ hw/arm/virt.c | 46 +++++++++++++++++++++++++++++++--------- include/hw/arm/virt.h | 4 +++- 3 files changed, 47 insertions(+), 18 deletions(-)
PATCH v12 7/28 hw: arm: virt: rework MSI-X configuration
In reply to Mohamed MediouniIntroduce a -M msi= argument to be able to control MSI-X support independently from ITS, as part of supporting GICv3 + GICv2m platforms.
Remove vms->its as it's no longer needed after that change.
--- hw/arm/virt-acpi-build.c | 3 +- hw/arm/virt.c | 112 +++++++++++++++++++++++++++++++-------- include/hw/arm/virt.h | 4 +- 3 files changed, 95 insertions(+), 24 deletions(-)
hw/arm/virt-acpi-build.c +1 -2
@@ -962,8 +962,7 @@ build_madt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) } } -if (!(vms->gic_version !=VIRT_GIC_VERSION_2 &&virt_is_its_enabled (vms)) - && !vms->no_gicv3_with_gicv2m) { +if (virt_is_gicv2m_enabled (vms)) {const uint16_t spi_base = vms->irqmap[VIRT_GIC_V2M ] +ARM_SPI_BASE ;/* 5.2.12.16 GIC MSI Frame Structure */
hw/arm/virt.c +91 -21
161 lines not on this page · raw message
include/hw/arm/virt.h +3 -1
@@ -101,6 +101,8 @@ typedef enum VirtIOMMUType {typedef enum VirtMSIControllerType {VIRT_MSI_CTRL_NONE , +/* This value is overriden at runtime.*/ +VIRT_MSI_CTRL_AUTO ,VIRT_MSI_CTRL_GICV2M ,VIRT_MSI_CTRL_ITS , }VirtMSIControllerType ;
@@ -147,7 +149,6 @@ struct VirtMachineState {bool highmem_ecam;bool highmem_mmio;bool highmem_redists; -OnOffAuto its;bool tcg_its;bool virt;bool ras;
@@ -217,5 +218,6 @@ static inline int virt_gicv3_redist_region_count(VirtMachineState *vms) }bool virt_is_its_enabled (VirtMachineState *vms); +bool virt_is_gicv2m_enabled (VirtMachineState *vms);#endif /* QEMU_ARM_VIRT_H */
Signature · 1 line
2.50.1 (Apple Git-155)
Re: [PATCH v12 07/28] hw: arm: virt: rework MSI-X configuration
Quoted 11 lines · Mohamed Mediouni
Introduce a -M msi= argument to be able to control MSI-X support independently from ITS, as part of supporting GICv3 + GICv2m platforms.
Remove
vms->itsas it's no longer needed after that change.Signed-off-by Mohamed Mediouni <[email protected]>--- hw/arm/virt-acpi-build.c | 3 +- hw/arm/virt.c | 112 +++++++++++++++++++++++++++++++-------- include/hw/arm/virt.h | 4 +- 3 files changed, 95 insertions(+), 24 deletions(-)
Re: [PATCH v12 07/28] hw: arm: virt: rework MSI-X configuration
In reply to Mohamed MediouniQuoted 64 lines · Mohamed Mediouni
Introduce a -M msi= argument to be able to control MSI-X support independently from ITS, as part of supporting GICv3 + GICv2m platforms.
Remove
vms->itsas it's no longer needed after that change.Signed-off-by Mohamed Mediouni <[email protected]>--- hw/arm/virt-acpi-build.c | 3 +- hw/arm/virt.c | 112 +++++++++++++++++++++++++++++++-------- include/hw/arm/virt.h | 4 +- 3 files changed, 95 insertions(+), 24 deletions(-)hw/arm/virt-acpi-build.c +1
-2@@ -962,8 +962,7 @@ build_madt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) } } -if (!(vms->gic_version !=VIRT_GIC_VERSION_2 &&virt_is_its_enabled (vms)) - && !vms->no_gicv3_with_gicv2m) { +if (virt_is_gicv2m_enabled (vms)) {const uint16_t spi_base = vms->irqmap[VIRT_GIC_V2M ] +ARM_SPI_BASE ;/* 5.2.12.16 GIC MSI Frame Structure */ hw/arm/virt.c +15
-6@@ -966,12 +966,12 @@ static void create_gic(VirtMachineState *vms, MemoryRegion *mem)fdt_add_gic_node (vms); -if (vms->gic_version !=VIRT_GIC_VERSION_2 &&virt_is_its_enabled (vms)) { +if (virt_is_its_enabled (vms)) {create_its (vms); - }else if (vms->gic_version !=VIRT_GIC_VERSION_2 && !vms->no_gicv3_with_gicv2m) { -create_v2m (vms); - }else if (vms->gic_version ==VIRT_GIC_VERSION_2 ) { + }else if (virt_is_gicv2m_enabled (vms)) {create_v2m (vms); + }else { + vms->msi_controller =VIRT_MSI_CTRL_NONE ; } }@@ -2710,32 +2710,95 @@ static void virt_set_highmem_mmio_size(Object *obj, Visitor *v,bool virt_is_its_enabled (VirtMachineState *vms) { -if (vms->its ==ON_OFF_AUTO_OFF ) { -return false; +switch (vms->msi_controller) { +case VIRT_MSI_CTRL_NONE : +return false; +case VIRT_MSI_CTRL_ITS : +return true; +case VIRT_MSI_CTRL_GICV2M : +return false; +case VIRT_MSI_CTRL_AUTO : +if (whpx_enabled () &&whpx_irqchip_in_kernel ()) { +return false; + }
hw/arm/virt.c static void virt_set_highmem_mmio_size(Object *obj, Visitor *v, · line 2731
Quoted 10 lines
hw/arm/virt.c +7
-2+if (vms->gic_version ==VIRT_GIC_VERSION_2 ) { +return false; + } +return true; +default : +return false; } -if (vms->its ==ON_OFF_AUTO_AUTO ) { -if (whpx_enabled ()) { +}
ERROR: switch and case should be at the same indent #63: FILE: hw/arm/virt.c:2713:
+ switch (vms->msi_controller) {
+ case VIRT_MSI_CTRL_NONE:
[...]
+ case VIRT_MSI_CTRL_ITS:
[...]
+ case VIRT_MSI_CTRL_GICV2M:
[...]
+ case VIRT_MSI_CTRL_AUTO:
[...]
+ default:
hw/arm/virt.c static void virt_set_highmem_mmio_size(Object *obj, Visitor *v, · line 2739
Quoted 9 lines
hw/arm/virt.c +7
-1+ +bool virt_is_gicv2m_enabled (VirtMachineState *vms) +{ +switch (vms->msi_controller) { +case VIRT_MSI_CTRL_NONE :return false; - } +default : +return !virt_is_its_enabled (vms);
#89: FILE: hw/arm/virt.c:2735:
+ switch (vms->msi_controller) {
+ case VIRT_MSI_CTRL_NONE:
[...]
+ default:
Quoted 141 lines
hw/arm/virt.c +62
-12} -return true; } -static void virt_get_its (Object *obj,Visitor *v,const char *name, -void *opaque,Error **errp) +static char *virt_get_msi (Object *obj,Error **errp) {VirtMachineState *vms =VIRT_MACHINE (obj); -OnOffAuto its = vms->its; +const char *val; -visit_type_OnOffAuto (v, name, &its, errp); +switch (vms->msi_controller) { +case VIRT_MSI_CTRL_NONE : + val ="off" ; +break ; +case VIRT_MSI_CTRL_ITS : + val ="its" ; +break ; +case VIRT_MSI_CTRL_GICV2M : + val ="gicv2m" ; +break ; +default : + val ="auto" ; +break ; + } +return g_strdup (val); } -static void virt_set_its (Object *obj,Visitor *v,const char *name, -void *opaque,Error **errp) +static void virt_set_msi (Object *obj,const char *value,Error **errp) { +ERRP_GUARD ();VirtMachineState *vms =VIRT_MACHINE (obj); -visit_type_OnOffAuto (v, name, &vms->its, errp); +if (!strcmp (value,"auto" )) { + vms->msi_controller =VIRT_MSI_CTRL_AUTO ;/* Will be overriden later */ + }else if (!strcmp (value,"its" )) { + vms->msi_controller =VIRT_MSI_CTRL_ITS ; + }else if (!strcmp (value,"gicv2m" )) { + vms->msi_controller =VIRT_MSI_CTRL_GICV2M ; + }else if (!strcmp (value,"none" )) { + vms->msi_controller =VIRT_MSI_CTRL_NONE ; + }else { +error_setg (errp,"Invalid msi value" ); +error_append_hint (errp,"Valid values are auto, gicv2m, its, off\n" ); + } +} + +static bool virt_get_its (Object *obj,Error **errp) +{ +VirtMachineState *vms =VIRT_MACHINE (obj); + +return virt_is_its_enabled (vms); +} + +static void virt_set_its (Object *obj,bool value,Error **errp) +{ +VirtMachineState *vms =VIRT_MACHINE (obj); + +if (value) { + vms->msi_controller =VIRT_MSI_CTRL_ITS ; + }else if (vms->no_gicv3_with_gicv2m) { + vms->msi_controller =VIRT_MSI_CTRL_NONE ; + }else { + vms->msi_controller =VIRT_MSI_CTRL_GICV2M ; + } }static bool virt_get_dtb_randomness (Object *obj,Error **errp)@@ -3062,6 +3125,8 @@ static void virt_machine_device_pre_plug_cb(HotplugHandler *hotplug_dev, db_start = base_memmap[VIRT_GIC_V2M ].base; db_end = db_start + base_memmap[VIRT_GIC_V2M ].size -1 ;break ; +case VIRT_MSI_CTRL_AUTO : +g_assert_not_reached (); } resv_prop_str = g_strdup_printf("0x%"PRIx64":0x%"PRIx64":%u", db_start, db_end,@@ -3452,13 +3517,18 @@ static void virt_machine_class_init(ObjectClass *oc, const void *data)"guest CPU which implements the ARM " "Memory Tagging Extension"); -object_class_property_add (oc,"its" ,"OnOffAuto" , - virt_get_its, virt_set_its, -NULL ,NULL ); +object_class_property_add_bool (oc,"its" , virt_get_its, + virt_set_its);object_class_property_set_description (oc,"its" ,"Set on/off to enable/disable " "ITS instantiation" ); +object_class_property_add_str (oc,"msi" , virt_get_msi, + virt_set_msi); +object_class_property_set_description (oc,"msi" , +"Set MSI settings. " +"Valid values are auto/gicv2m/its/off" ); +object_class_property_add_bool (oc,"dtb-randomness" , virt_get_dtb_randomness, virt_set_dtb_randomness);@@ -3515,7 +3585,7 @@ static void virt_instance_init(Object *obj) vms->highmem_redists = true;/* Default allows ITS instantiation if available */ - vms->its =ON_OFF_AUTO_AUTO ; + vms->msi_controller =VIRT_MSI_CTRL_AUTO ;/* Allow ITS emulation if the machine version supports it */ vms->tcg_its = !vmc->no_tcg_its; vms->no_gicv3_with_gicv2m = false;include/hw/arm/virt.h +3
-1@@ -101,6 +101,8 @@ typedef enum VirtIOMMUType {typedef enum VirtMSIControllerType {VIRT_MSI_CTRL_NONE , +/* This value is overriden at runtime.*/ +VIRT_MSI_CTRL_AUTO ,VIRT_MSI_CTRL_GICV2M ,VIRT_MSI_CTRL_ITS , }VirtMSIControllerType ;@@ -147,7 +149,6 @@ struct VirtMachineState {bool highmem_ecam;bool highmem_mmio;bool highmem_redists; -OnOffAuto its;bool tcg_its;bool virt;bool ras;@@ -217,5 +218,6 @@ static inline int virt_gicv3_redist_region_count(VirtMachineState *vms) }bool virt_is_its_enabled (VirtMachineState *vms); +bool virt_is_gicv2m_enabled (VirtMachineState *vms);#endif /* QEMU_ARM_VIRT_H */
PATCH v12 8/28 hw: arm: virt-acpi-build: add temporary hack to match existing behavior
In reply to Mohamed MediouniIn the prior Qemu ACPI table handling, GICv2 configurations had vms->its=1... That's broken.
Match that assumption to match the existing ACPI tables that have been shipping for quite a while.
And see what to do for older releases. Likely don't want this to be carried around indefinitely.
--- hw/arm/virt-acpi-build.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
hw/arm/virt-acpi-build.c +5 -5
@@ -473,7 +473,7 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) nb_nodes = num_smmus +1 ;/* RC and SMMUv3 */ rc_mapping_count = rc_smmu_idmaps_len; -if (virt_is_its_enabled (vms)) { +if (virt_is_its_enabled (vms) || vms->gic_version ==2 ) {/* * Knowing the ID ranges from the RC to the SMMU, it's possible to * determine the ID ranges from RC that go directly to ITS.
@@ -484,7 +484,7 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) rc_mapping_count += rc_its_idmaps->len; } }else { -if (virt_is_its_enabled (vms)) { +if (virt_is_its_enabled (vms) || vms->gic_version ==2 ) { nb_nodes =2 ;/* RC and ITS */ rc_mapping_count =1 ;/* Direct map to ITS */ }else {
@@ -499,7 +499,7 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)build_append_int_noprefix (table_data,IORT_NODE_OFFSET ,4 );build_append_int_noprefix (table_data,0 ,4 );/* Reserved */ -if (virt_is_its_enabled (vms)) { +if (virt_is_its_enabled (vms) || vms->gic_version ==2 ) {/* Table 12 ITS Group Format */ build_append_int_noprefix (table_data,0 /* ITS Group */ ,1 );/* Type */ node_size =20 /* fixed header size */ +4 /* 1 GIC ITS Identifier */ ;
@@ -518,7 +518,7 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)int smmu_mapping_count, offset_to_id_array;int irq = sdev->irq; -if (virt_is_its_enabled (vms)) { +if (virt_is_its_enabled (vms) || vms->gic_version ==2 ) { smmu_mapping_count =1 ;/* ITS Group node */ offset_to_id_array =SMMU_V3_ENTRY_SIZE ;/* Just after the header */ }else {
@@ -611,7 +611,7 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) } } -if (virt_is_its_enabled (vms)) { +if (virt_is_its_enabled (vms) || vms->gic_version ==2 ) {/* * Map bypassed (don't go through the SMMU) RIDs (input) to * ITS Group node directly: RC -> ITS.
Signature · 1 line
2.50.1 (Apple Git-155)
Re: [PATCH v12 08/28] hw: arm: virt-acpi-build: add temporary hack to match existing behavior
Quoted 6 lines · Mohamed Mediouni
In the prior Qemu ACPI table handling, GICv2 configurations had vms->its=1... That's broken.
Match that assumption to match the existing ACPI tables that have been shipping for quite a while.
Quoted 7 lines
And see what to do for older releases. Likely don't want this to be carried around indefinitely.
Signed-off-by Mohamed Mediouni <[email protected]>--- hw/arm/virt-acpi-build.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
PATCH v12 9/28 docs: arm: update virt machine model description
In reply to Mohamed MediouniUpdate the documentation to match current QEMU.
Remove the mention of pre-2.7 machine models as those aren't provided anymore.
--- docs/system/arm/virt.rst | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-)
docs/system/arm/virt.rst +8 -5
@@ -41,9 +41,10 @@ The virt board supports: - User-creatable SMMUv3 devices (see below for example) - hotpluggable DIMMs - hotpluggable NVDIMMs -- An MSI controller (GICv2M or ITS). GICv2M is selected by default along - with GICv2. ITS is selected by default with GICv3 (>= virt-2.7). Note - that ITS is not modeled in TCG mode. +- An MSI controller (GICv2m or ITS). + - When using a GICv3, ITS is selected by default when available on the platform. + - If using a GICv2 or when ITS is not available or disabled, a GICv2m is provided by default instead. + - Before virt-11.0, when using a GICv3 without the ITS, a GICv2m is not provided. - 32 virtio-mmio transport devices - running guests using the KVM accelerator on aarch64 hardware - large amounts of RAM (at least 255GB, and more if using highmem)
@@ -167,9 +168,11 @@ gic-version with TCG this is currently ``3`` if ``virtualization`` is ``off`` and ``4`` if ``virtualization`` is ``on``, but this may change in future) +msi + Set ``auto``/``gicv2m``/``its``/``none`` to control MSI controller configuration. The default is ``auto``. + its - Set ``on``/``off`` to enable/disable ITS instantiation. The default is ``on`` - for machine types later than ``virt-2.7``. + Set ``on``/``off``/``auto`` to control ITS instantiation. The default is ``auto``. iommu Set the IOMMU type to create for the guest. Valid values are:
Signature · 1 line
2.50.1 (Apple Git-155)
Re: [PATCH v12 09/28] docs: arm: update virt machine model description
Quoted 9 lines · Mohamed Mediouni
Update the documentation to match current QEMU.
Remove the mention of pre-2.7 machine models as those aren't provided anymore.
Signed-off-by Mohamed Mediouni <[email protected]>--- docs/system/arm/virt.rst | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-)
PATCH v12 10/28 whpx: Move around files before introducing AArch64 support
In reply to Mohamed MediouniSwitch to a design where we can share whpx code between x86 and AArch64 when it makes sense to do so.
---
MAINTAINERS | 2 ++
accel/meson.build | 1 +
accel/whpx/meson.build | 6 ++++++
{target/i386 => accel}/whpx/whpx-accel-ops.c | 4 ++--
{target/i386/whpx => include/system}/whpx-accel-ops.h | 4 ++--
{target/i386/whpx => include/system}/whpx-internal.h | 6 ++++--
target/i386/whpx/meson.build | 1 -
target/i386/whpx/whpx-all.c | 4 ++--
target/i386/whpx/whpx-apic.c | 2 +-
9 files changed, 20 insertions(+), 10 deletions(-)
create mode 100644 accel/whpx/meson.build
rename {target/i386 => accel}/whpx/whpx-accel-ops.c (97%)
rename {target/i386/whpx => include/system}/whpx-accel-ops.h (92%)
rename {target/i386/whpx => include/system}/whpx-internal.h (97%)MAINTAINERS +2 -0
@@ -550,9 +550,11 @@ WHPX CPUs M: Pedro Barbuda <[email protected]> M: Mohamed Mediouni <[email protected]> S: Supported +F: accel/whpx/ F: target/i386/whpx/ F: accel/stubs/whpx-stub.c F: include/system/whpx.h +F: include/system/whpx-accel-ops.h MSHV M: Magnus Kulke <[email protected]>
accel/meson.build +1 -0
@@ -6,6 +6,7 @@ user_ss.add(files('accel-user.c')) subdir('tcg') if have_system subdir('hvf') + subdir('whpx') subdir('qtest') subdir('kvm') subdir('xen')
accel/whpx/meson.build new file +6 -0
@@ -0,0 +1,6 @@ +whpx_ss = ss.source_set() +whpx_ss.add(files( + 'whpx-accel-ops.c', +)) + +specific_ss.add_all(when: 'CONFIG_WHPX', if_true: whpx_ss)
accel/whpx/whpx-accel-ops.c renamed from target/i386/whpx/whpx-accel-ops.c +2 -2
@@ -16,8 +16,8 @@#include "qemu/guest-random.h" #include "system/whpx.h" -#include "whpx-internal.h" -#include "whpx-accel-ops.h" +#include "system/whpx-internal.h" +#include "system/whpx-accel-ops.h" static void *whpx_cpu_thread_fn (void *arg) {
include/system/whpx-accel-ops.h renamed from target/i386/whpx/whpx-accel-ops.h +2 -2
@@ -7,8 +7,8 @@* See the COPYING file in the top-level directory. */ -#ifndef TARGET_I386_WHPX_ACCEL_OPS_H -#define TARGET_I386_WHPX_ACCEL_OPS_H +#ifndef SYSTEM_WHPX_ACCEL_OPS_H +#define SYSTEM_WHPX_ACCEL_OPS_H #include "system/cpus.h"
include/system/whpx-internal.h renamed from target/i386/whpx/whpx-internal.h +4 -2
@@ -1,11 +1,13 @@ -#ifndef TARGET_I386_WHPX_INTERNAL_H -#define TARGET_I386_WHPX_INTERNAL_H +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef SYSTEM_WHPX_INTERNAL_H +#define SYSTEM_WHPX_INTERNAL_H #include <windows.h> #include <winhvplatform.h> #include <winhvemulation.h> #include "hw/i386/apic.h" +#include "exec/vaddr.h" typedef enum WhpxBreakpointState { WHPX_BP_CLEARED = 0,
target/i386/whpx/meson.build +0 -1
@@ -1,5 +1,4 @@ i386_system_ss.add(when: 'CONFIG_WHPX', if_true: files( 'whpx-all.c', 'whpx-apic.c', - 'whpx-accel-ops.c', ))
target/i386/whpx/whpx-all.c +2 -2
@@ -31,8 +31,8 @@#include "accel/accel-cpu-target.h" #include <winerror.h> -#include "whpx-internal.h" -#include "whpx-accel-ops.h" +#include "system/whpx-internal.h" +#include "system/whpx-accel-ops.h" #include <winhvplatform.h> #include <winhvemulation.h>
target/i386/whpx/whpx-apic.c +1 -1
@@ -18,7 +18,7 @@#include "hw/pci/msi.h" #include "system/hw_accel.h" #include "system/whpx.h" -#include "whpx-internal.h" +#include "system/whpx-internal.h" struct whpx_lapic_state { struct {
Signature · 1 line
2.50.1 (Apple Git-155)
PATCH v12 11/28 whpx: reshuffle common code
In reply to Mohamed MediouniSome code can be shared between x86_64 and arm64 WHPX. Do so as much as reasonable.
--- MAINTAINERS | 2 + accel/whpx/meson.build | 1 + accel/whpx/whpx-common.c | 562 +++++++++++++++++++++++++++++++++++ include/system/whpx-all.h | 20 ++ include/system/whpx-common.h | 21 ++ target/i386/whpx/whpx-all.c | 551 +--------------------------------- 6 files changed, 616 insertions(+), 541 deletions(-) create mode 100644 accel/whpx/whpx-common.c create mode 100644 include/system/whpx-all.h create mode 100644 include/system/whpx-common.h
MAINTAINERS +2 -0
@@ -555,6 +555,8 @@ F: target/i386/whpx/ F: accel/stubs/whpx-stub.c F: include/system/whpx.h F: include/system/whpx-accel-ops.h +F: include/system/whpx-common.h +F: include/system/whpx-internal.h MSHV M: Magnus Kulke <[email protected]>
accel/whpx/meson.build +1 -0
@@ -1,6 +1,7 @@ whpx_ss = ss.source_set() whpx_ss.add(files( 'whpx-accel-ops.c', + 'whpx-common.c' )) specific_ss.add_all(when: 'CONFIG_WHPX', if_true: whpx_ss)
accel/whpx/whpx-common.c new file +562 -0
562 lines not on this page · raw message
include/system/whpx-all.h new file +20 -0
@@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef SYSTEM_WHPX_ALL_H +#define SYSTEM_WHPX_ALL_H + +/* Called by whpx-common */ +int whpx_vcpu_run (CPUState *cpu); +void whpx_get_registers (CPUState *cpu); +void whpx_set_registers (CPUState *cpu,int level); +int whpx_accel_init (AccelState *as,MachineState *ms); +void whpx_cpu_instance_init (CPUState *cs); +HRESULT whpx_set_exception_exit_bitmap (UINT64 exceptions); +void whpx_apply_breakpoints ( +struct whpx_breakpoint_collection *breakpoints, +CPUState *cpu, +bool resuming); +void whpx_translate_cpu_breakpoints ( +struct whpx_breakpoints *breakpoints, +CPUState *cpu, +int cpu_breakpoint_count); +#endif
include/system/whpx-common.h new file +21 -0
@@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef SYSTEM_WHPX_COMMON_H +#define SYSTEM_WHPX_COMMON_H + +struct AccelCPUState { +WHV_EMULATOR_HANDLE emulator; +bool window_registered; +bool interruptable; +bool ready_for_pic_interrupt; +uint64_t tpr; +uint64_t apic_base; +bool interruption_pending; +/* Must be the last field as it may have a tail */ +WHV_RUN_VP_EXIT_CONTEXT exit_ctx; +}; + +int whpx_first_vcpu_starting (CPUState *cpu); +int whpx_last_vcpu_stopping (CPUState *cpu); +void whpx_memory_init (void ); +struct whpx_breakpoint *whpx_lookup_breakpoint_by_addr (uint64_t address); +#endif
target/i386/whpx/whpx-all.c +10 -541
639 lines not on this page · raw message
Signature · 1 line
2.50.1 (Apple Git-155)
Re: [PATCH v12 11/28] whpx: reshuffle common code
Quoted 48 lines · Mohamed Mediouni
Some code can be shared between
x86_64and arm64 WHPX. Do so as much as reasonable.Signed-off-by Mohamed Mediouni <[email protected]>Reviewed-by Pierrick Bouvier <[email protected]>--- MAINTAINERS | 2 + accel/whpx/meson.build | 1 + accel/whpx/whpx-common.c | 562 +++++++++++++++++++++++++++++++++++ include/system/whpx-all.h | 20 ++ include/system/whpx-common.h | 21 ++ target/i386/whpx/whpx-all.c | 551 +--------------------------------- 6 files changed, 616 insertions(+), 541 deletions(-)create mode 100644
accel/whpx/whpx-common.c
create mode 100644include/system/whpx-all.h
create mode 100644include/system/whpx-common.hMAINTAINERS +2
-0@@ -555,6 +555,8 @@ F: target/i386/whpx/ F: accel/stubs/whpx-stub.c F: include/system/whpx.h F: include/system/whpx-accel-ops.h +F: include/system/whpx-common.h +F: include/system/whpx-internal.h MSHV M: Magnus Kulke <[email protected]>accel/whpx/meson.build +1
-0@@ -1,6 +1,7 @@ whpx_ss = ss.source_set() whpx_ss.add(files( 'whpx-accel-ops.c', + 'whpx-common.c' )) specific_ss.add_all(when: 'CONFIG_WHPX', if_true: whpx_ss)accel/whpx/whpx-common.c new file +0
-0
accel/whpx/whpx-common.c line 9
Quoted 9 lines
accel/whpx/whpx-common.c new file +9
-0@@ -0,0 +1,562 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* +* QEMU Windows Hypervisor Platform accelerator (WHPX) +* +* Copyright Microsoft Corp. 2017 +* +* This work is licensed under the terms of the GNU GPL, version 2 or later. +* See the COPYING file in the top-level directory. +*
ERROR: New file 'accel/whpx/whpx-common.c' must not have license boilerplate header text, only the SPDX-License-Identifier, unless this file was copied from existing code already having such text.
You can remove "This work..."
Quoted 1,262 lines
accel/whpx/whpx-common.c new file +553
-0+*/ + +#include "qemu/osdep.h" +#include "cpu.h" +#include "system/address-spaces.h" +#include "system/ioport.h" +#include "gdbstub/helpers.h" +#include "qemu/accel.h" +#include "accel/accel-ops.h" +#include "system/whpx.h" +#include "system/cpus.h" +#include "system/runstate.h" +#include "qemu/main-loop.h" +#include "hw/core/boards.h" +#include "hw/intc/ioapic.h" +#include "qemu/error-report.h" +#include "qapi/error.h" +#include "qapi/qapi-types-common.h" +#include "qapi/qapi-visit-common.h" +#include "migration/blocker.h" +#include "accel/accel-cpu-target.h" +#include <winerror.h> + +#include "system/whpx-internal.h" +#include "system/whpx-accel-ops.h" +#include "system/whpx-common.h" +#include "system/whpx-all.h" + +#include <winhvplatform.h> +#include <winhvplatformdefs.h> + +bool whpx_allowed; +static bool whp_dispatch_initialized; +static HMODULE hWinHvPlatform; +static HMODULE hWinHvEmulation; + +struct whpx_state whpx_global; +struct WHPDispatch whp_dispatch; + +/* Tries to find a breakpoint at the specified address. */ +struct whpx_breakpoint *whpx_lookup_breakpoint_by_addr (uint64_t address) +{ +struct whpx_state *whpx = &whpx_global; +int i; + +if (whpx->breakpoints.breakpoints) { +for (i =0 ; i < whpx->breakpoints.breakpoints->used; i++) { +if (address == whpx->breakpoints.breakpoints->data[i].address) { +return &whpx->breakpoints.breakpoints->data[i]; + } + } + } + +return NULL ; +} + +/* +* This function is called when the a VCPU is about to start and no other +* VCPUs have been started so far. Since the VCPU start order could be +* arbitrary, it doesn't have to be VCPU#0. +* +* It is used to commit the breakpoints into memory, and configure WHPX +* to intercept debug exceptions. +* +* Note that whpx_set_exception_exit_bitmap() cannot be called if one or +* more VCPUs are already running, so this is the best place to do it. +*/ +int whpx_first_vcpu_starting (CPUState *cpu) +{ +struct whpx_state *whpx = &whpx_global; + +g_assert (bql_locked ()); + +if (!QTAILQ_EMPTY (&cpu->breakpoints) || + (whpx->breakpoints.breakpoints && + whpx->breakpoints.breakpoints->used)) { +CPUBreakpoint *bp; +int i =0 ; +bool update_pending = false; + + QTAILQ_FOREACH(bp, &cpu->breakpoints, entry) { +if (i >= whpx->breakpoints.original_address_count || + bp->pc != whpx->breakpoints.original_addresses[i]) { + update_pending = true; + } + + i++; + } + +if (i != whpx->breakpoints.original_address_count) { + update_pending = true; + } + +if (update_pending) { +/* +* The CPU breakpoints have changed since the last call to +* whpx_translate_cpu_breakpoints(). WHPX breakpoints must +* now be recomputed. +*/ +whpx_translate_cpu_breakpoints (&whpx->breakpoints, cpu, i); + } +/* Actually insert the breakpoints into the memory. */ +whpx_apply_breakpoints (whpx->breakpoints.breakpoints, cpu, true); + } +HRESULT hr; +uint64_t exception_mask; +if (whpx->step_pending || + (whpx->breakpoints.breakpoints && + whpx->breakpoints.breakpoints->used)) { +/* +* We are either attempting to single-step one or more CPUs, or +* have one or more breakpoints enabled. Both require intercepting +* the WHvX64ExceptionTypeBreakpointTrap exception. +*/ + exception_mask =1UL << WHvX64ExceptionTypeDebugTrapOrFault; + }else { +/* Let the guest handle all exceptions. */ + exception_mask =0 ; + } + hr =whpx_set_exception_exit_bitmap (exception_mask); +if (!SUCCEEDED (hr)) { +error_report ("WHPX: Failed to update exception exit mask," +"hr=%08lx." , hr); +return 1 ; + } +return 0 ; +} + +/* +* This function is called when the last VCPU has finished running. +* It is used to remove any previously set breakpoints from memory. +*/ +int whpx_last_vcpu_stopping (CPUState *cpu) +{ +whpx_apply_breakpoints (whpx_global.breakpoints.breakpoints, cpu, false); +return 0 ; +} + +static void do_whpx_cpu_synchronize_state (CPUState *cpu,run_on_cpu_data arg) +{ +if (!cpu->vcpu_dirty) { +whpx_get_registers (cpu); + cpu->vcpu_dirty = true; + } +} + +static void do_whpx_cpu_synchronize_post_reset (CPUState *cpu, +run_on_cpu_data arg) +{ +whpx_set_registers (cpu,WHPX_SET_RESET_STATE ); + cpu->vcpu_dirty = false; +} + +static void do_whpx_cpu_synchronize_post_init (CPUState *cpu, +run_on_cpu_data arg) +{ +whpx_set_registers (cpu,WHPX_SET_FULL_STATE ); + cpu->vcpu_dirty = false; +} + +static void do_whpx_cpu_synchronize_pre_loadvm (CPUState *cpu, +run_on_cpu_data arg) +{ + cpu->vcpu_dirty = true; +} + +/* +* CPU support. +*/ + +void whpx_cpu_synchronize_state (CPUState *cpu) +{ +if (!cpu->vcpu_dirty) { +run_on_cpu (cpu, do_whpx_cpu_synchronize_state,RUN_ON_CPU_NULL ); + } +} + +void whpx_cpu_synchronize_post_reset (CPUState *cpu) +{ +run_on_cpu (cpu, do_whpx_cpu_synchronize_post_reset,RUN_ON_CPU_NULL ); +} + +void whpx_cpu_synchronize_post_init (CPUState *cpu) +{ +run_on_cpu (cpu, do_whpx_cpu_synchronize_post_init,RUN_ON_CPU_NULL ); +} + +void whpx_cpu_synchronize_pre_loadvm (CPUState *cpu) +{ +run_on_cpu (cpu, do_whpx_cpu_synchronize_pre_loadvm,RUN_ON_CPU_NULL ); +} + +static void whpx_pre_resume_vm (AccelState *as,bool step_pending) +{ + whpx_global.step_pending = step_pending; +} + +/* +* Vcpu support. +*/ + +int whpx_vcpu_exec (CPUState *cpu) +{ +int ret; +int fatal; + +for (;;) { +if (cpu->exception_index >=EXCP_INTERRUPT ) { + ret = cpu->exception_index; + cpu->exception_index =-1 ; +break ; + } + + fatal =whpx_vcpu_run (cpu); + +if (fatal) { +error_report ("WHPX: Failed to exec a virtual processor" ); +abort (); + } + } + +return ret; +} + +void whpx_destroy_vcpu (CPUState *cpu) +{ +struct whpx_state *whpx = &whpx_global; + + whp_dispatch.WHvDeleteVirtualProcessor (whpx->partition, cpu->cpu_index); +AccelCPUState *vcpu = cpu->accel; + whp_dispatch.WHvEmulatorDestroyEmulator (vcpu->emulator); +g_free (cpu->accel); +} + + +void whpx_vcpu_kick (CPUState *cpu) +{ +struct whpx_state *whpx = &whpx_global; + whp_dispatch.WHvCancelRunVirtualProcessor ( + whpx->partition, cpu->cpu_index,0 ); +} + +/* +* Memory support. +*/ + +static void whpx_update_mapping (hwaddr start_pa,ram_addr_t size, +void *host_va,int add,int rom, +const char *name) +{ +struct whpx_state *whpx = &whpx_global; +HRESULT hr; + +/* +if (add) { +printf("WHPX: ADD PA:%p Size:%p, Host:%p, %s, '%s'\n", +(void*)start_pa, (void*)size, host_va, +(rom ? "ROM" : "RAM"), name); +} else { +printf("WHPX: DEL PA:%p Size:%p, Host:%p, '%s'\n", +(void*)start_pa, (void*)size, host_va, name); +} +*/ + +if (add) { + hr = whp_dispatch.WHvMapGpaRange (whpx->partition, + host_va, + start_pa, + size, + (WHvMapGpaRangeFlagRead | + WHvMapGpaRangeFlagExecute | + (rom ?0 : WHvMapGpaRangeFlagWrite))); + }else { + hr = whp_dispatch.WHvUnmapGpaRange (whpx->partition, + start_pa, + size); + } + +if (FAILED (hr)) { +error_report ("WHPX: Failed to %s GPA range '%s' PA:%p, Size:%p bytes," +" Host:%p, hr=%08lx" , + (add ?"MAP" :"UNMAP" ), name, + (void *)(uintptr_t )start_pa, (void *)size, host_va, hr); + } +} + +static void whpx_process_section (MemoryRegionSection *section,int add) +{ +MemoryRegion *mr = section->mr; +hwaddr start_pa = section->offset_within_address_space; +ram_addr_t size =int128_get64 (section->size); +unsigned int delta; +uint64_t host_va; + +if (!memory_region_is_ram (mr)) { +return ; + } + + delta =qemu_real_host_page_size () - (start_pa & ~qemu_real_host_page_mask ()); + delta &= ~qemu_real_host_page_mask (); +if (delta > size) { +return ; + } + start_pa += delta; + size -= delta; + size &=qemu_real_host_page_mask (); +if (!size || (start_pa & ~qemu_real_host_page_mask ())) { +return ; + } + + host_va = (uintptr_t )memory_region_get_ram_ptr (mr) + + section->offset_within_region + delta; + +whpx_update_mapping (start_pa, size, (void *)(uintptr_t )host_va, add, +memory_region_is_rom (mr), mr->name); +} + +static void whpx_region_add (MemoryListener *listener, +MemoryRegionSection *section) +{ +memory_region_ref (section->mr); +whpx_process_section (section,1 ); +} + +static void whpx_region_del (MemoryListener *listener, +MemoryRegionSection *section) +{ +whpx_process_section (section,0 ); +memory_region_unref (section->mr); +} + +static void whpx_transaction_begin (MemoryListener *listener) +{ +} + +static void whpx_transaction_commit (MemoryListener *listener) +{ +} + +static void whpx_log_sync (MemoryListener *listener, +MemoryRegionSection *section) +{ +MemoryRegion *mr = section->mr; + +if (!memory_region_is_ram (mr)) { +return ; + } + +memory_region_set_dirty (mr,0 ,int128_get64 (section->size)); +} + +static MemoryListener whpx_memory_listener = { + .name ="whpx" , + .begin = whpx_transaction_begin, + .commit = whpx_transaction_commit, + .region_add = whpx_region_add, + .region_del = whpx_region_del, + .log_sync = whpx_log_sync, + .priority =MEMORY_LISTENER_PRIORITY_ACCEL , +}; + +void whpx_memory_init (void ) +{ +memory_listener_register (&whpx_memory_listener, &address_space_memory); +} + +/* +* Load the functions from the given library, using the given handle. If a +* handle is provided, it is used, otherwise the library is opened. The +* handle will be updated on return with the opened one. +*/ +static bool load_whp_dispatch_fns (HMODULE *handle, +WHPFunctionList function_list) +{ +HMODULE hLib = *handle; + +#define WINHV_PLATFORM_DLL "WinHvPlatform.dll" +#define WINHV_EMULATION_DLL "WinHvEmulation.dll" +#define WHP_LOAD_FIELD_OPTIONAL (return_type, function_name, signature) \ + whp_dispatch.function_name = \ + (function_name ## _t)GetProcAddress(hLib, #function_name); \ + +#define WHP_LOAD_FIELD (return_type, function_name, signature) \ + whp_dispatch.function_name = \ + (function_name ## _t)GetProcAddress(hLib, #function_name); \ + if (!whp_dispatch.function_name) { \ + error_report("Could not load function %s", #function_name); \ + goto error; \ + } \ + +#define WHP_LOAD_LIB (lib_name, handle_lib) \ + if (!handle_lib) { \ + handle_lib = LoadLibrary(lib_name); \ + if (!handle_lib) { \ + error_report("Could not load library %s.", lib_name); \ + goto error; \ + } \ + } \ + +switch (function_list) { +case WINHV_PLATFORM_FNS_DEFAULT : + WHP_LOAD_LIB(WINHV_PLATFORM_DLL, hLib) +LIST_WINHVPLATFORM_FUNCTIONS (WHP_LOAD_FIELD) + break; +case WINHV_EMULATION_FNS_DEFAULT : + WHP_LOAD_LIB(WINHV_EMULATION_DLL, hLib) +LIST_WINHVEMULATION_FUNCTIONS (WHP_LOAD_FIELD) + break; +case WINHV_PLATFORM_FNS_SUPPLEMENTAL : + WHP_LOAD_LIB(WINHV_PLATFORM_DLL, hLib) +LIST_WINHVPLATFORM_FUNCTIONS_SUPPLEMENTAL (WHP_LOAD_FIELD_OPTIONAL) + break; + } + + *handle = hLib; +return true; + +error: +if (hLib) { +FreeLibrary (hLib); + } + +return false; +} + +static void whpx_set_kernel_irqchip (Object *obj,Visitor *v, +const char *name,void *opaque, +Error **errp) +{ +struct whpx_state *whpx = &whpx_global; +OnOffSplit mode; + +if (!visit_type_OnOffSplit (v, name, &mode, errp)) { +return ; + } + +switch (mode) { +case ON_OFF_SPLIT_ON : + whpx->kernel_irqchip_allowed = true; + whpx->kernel_irqchip_required = true; +break ; + +case ON_OFF_SPLIT_OFF : + whpx->kernel_irqchip_allowed = false; + whpx->kernel_irqchip_required = false; +break ; + +case ON_OFF_SPLIT_SPLIT : +error_setg (errp,"WHPX: split irqchip currently not supported" ); +error_append_hint (errp, +"Try without kernel-irqchip or with kernel-irqchip=on|off" ); +break ; + +default : +/* +* The value was checked in visit_type_OnOffSplit() above. If +* we get here, then something is wrong in QEMU. +*/ +abort (); + } +} + +static void whpx_cpu_accel_class_init (ObjectClass *oc,const void *data) +{ +AccelCPUClass *acc =ACCEL_CPU_CLASS (oc); + + acc->cpu_instance_init = whpx_cpu_instance_init; +} + +static const TypeInfo whpx_cpu_accel_type = { + .name =ACCEL_CPU_NAME ("whpx" ), + + .parent =TYPE_ACCEL_CPU , + .class_init = whpx_cpu_accel_class_init, + .abstract = true, +}; + +/* +* Partition support +*/ + +bool whpx_apic_in_platform (void ) +{ +return whpx_global.apic_in_platform; +} + +static void whpx_accel_class_init (ObjectClass *oc,const void *data) +{ +AccelClass *ac =ACCEL_CLASS (oc); + ac->name ="WHPX" ; + ac->init_machine = whpx_accel_init; + ac->pre_resume_vm = whpx_pre_resume_vm; + ac->allowed = &whpx_allowed; + +object_class_property_add (oc,"kernel-irqchip" ,"on|off|split" , +NULL , whpx_set_kernel_irqchip, +NULL ,NULL ); +object_class_property_set_description (oc,"kernel-irqchip" , +"Configure WHPX in-kernel irqchip" ); +} + +static void whpx_accel_instance_init (Object *obj) +{ +struct whpx_state *whpx = &whpx_global; + +memset (whpx,0 ,sizeof (struct whpx_state )); +/* Turn on kernel-irqchip, by default */ + whpx->kernel_irqchip_allowed = true; +} + +static const TypeInfo whpx_accel_type = { + .name =ACCEL_CLASS_NAME ("whpx" ), + .parent =TYPE_ACCEL , + .instance_init = whpx_accel_instance_init, + .class_init = whpx_accel_class_init, +}; + +static void whpx_type_init (void ) +{ +type_register_static (&whpx_accel_type); +type_register_static (&whpx_cpu_accel_type); +} + +bool init_whp_dispatch (void ) +{ +if (whp_dispatch_initialized) { +return true; + } + +if (!load_whp_dispatch_fns (&hWinHvPlatform,WINHV_PLATFORM_FNS_DEFAULT )) { + goto error; + } + +if (!load_whp_dispatch_fns (&hWinHvEmulation,WINHV_EMULATION_FNS_DEFAULT )) { + goto error; + } + +assert (load_whp_dispatch_fns (&hWinHvPlatform, +WINHV_PLATFORM_FNS_SUPPLEMENTAL )); + whp_dispatch_initialized = true; + +return true; +error: +if (hWinHvPlatform) { +FreeLibrary (hWinHvPlatform); + } +if (hWinHvEmulation) { +FreeLibrary (hWinHvEmulation); + } +return false; +} + +type_init (whpx_type_init);include/system/whpx-all.h new file +20
-0@@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef SYSTEM_WHPX_ALL_H +#define SYSTEM_WHPX_ALL_H + +/* Called by whpx-common */ +int whpx_vcpu_run (CPUState *cpu); +void whpx_get_registers (CPUState *cpu); +void whpx_set_registers (CPUState *cpu,int level); +int whpx_accel_init (AccelState *as,MachineState *ms); +void whpx_cpu_instance_init (CPUState *cs); +HRESULT whpx_set_exception_exit_bitmap (UINT64 exceptions); +void whpx_apply_breakpoints ( +struct whpx_breakpoint_collection *breakpoints, +CPUState *cpu, +bool resuming); +void whpx_translate_cpu_breakpoints ( +struct whpx_breakpoints *breakpoints, +CPUState *cpu, +int cpu_breakpoint_count); +#endif include/system/whpx-common.h new file +21
-0@@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef SYSTEM_WHPX_COMMON_H +#define SYSTEM_WHPX_COMMON_H + +struct AccelCPUState { +WHV_EMULATOR_HANDLE emulator; +bool window_registered; +bool interruptable; +bool ready_for_pic_interrupt; +uint64_t tpr; +uint64_t apic_base; +bool interruption_pending; +/* Must be the last field as it may have a tail */ +WHV_RUN_VP_EXIT_CONTEXT exit_ctx; +}; + +int whpx_first_vcpu_starting (CPUState *cpu); +int whpx_last_vcpu_stopping (CPUState *cpu); +void whpx_memory_init (void ); +struct whpx_breakpoint *whpx_lookup_breakpoint_by_addr (uint64_t address); +#endif target/i386/whpx/whpx-all.c +10
-541@@ -33,6 +33,8 @@#include "system/whpx-internal.h" #include "system/whpx-accel-ops.h" +#include "system/whpx-all.h" +#include "system/whpx-common.h" #include <winhvplatform.h> #include <winhvemulation.h> @@ -232,28 +234,9 @@ typedef enum WhpxStepMode {WHPX_STEP_EXCLUSIVE , } WhpxStepMode; -struct AccelCPUState { -WHV_EMULATOR_HANDLE emulator; -bool window_registered; -bool interruptable; -bool ready_for_pic_interrupt; -uint64_t tpr; -uint64_t apic_base; -bool interruption_pending; - -/* Must be the last field as it may have a tail */ -WHV_RUN_VP_EXIT_CONTEXT exit_ctx; -}; - -bool whpx_allowed; -static bool whp_dispatch_initialized; -static HMODULE hWinHvPlatform, hWinHvEmulation;static uint32_t max_vcpu_index;static WHV_PROCESSOR_XSAVE_FEATURES whpx_xsave_cap; -struct whpx_state whpx_global; -struct WHPDispatch whp_dispatch; -static bool whpx_has_xsave (void ) {return whpx_xsave_cap.XsaveSupport;@@ -379,7 +362,7 @@ static uint64_t whpx_cr8_to_apic_tpr(uint64_t cr8)return cr8 <<4 ; } -static void whpx_set_registers (CPUState *cpu,int level) +void whpx_set_registers (CPUState *cpu,int level) {struct whpx_state *whpx = &whpx_global;AccelCPUState *vcpu = cpu->accel;@@ -594,7 +577,7 @@ static void whpx_get_xcrs(CPUState *cpu)cpu_env (cpu)->xcr0 = xcr0.Reg64; } -static void whpx_get_registers (CPUState *cpu) +void whpx_get_registers (CPUState *cpu) {struct whpx_state *whpx = &whpx_global;AccelCPUState *vcpu = cpu->accel;@@ -934,7 +917,7 @@ static int whpx_handle_portio(CPUState *cpu,* The 'exceptions' argument accepts a bitmask, e.g: * (1 << WHvX64ExceptionTypeDebugTrapOrFault) | (...) */ -static HRESULT whpx_set_exception_exit_bitmap (UINT64 exceptions) +HRESULT whpx_set_exception_exit_bitmap (UINT64 exceptions) {struct whpx_state *whpx = &whpx_global;WHV_PARTITION_PROPERTY prop = {0 , };@@ -1084,23 +1067,6 @@ static HRESULT whpx_vcpu_configure_single_stepping(CPUState *cpu,return S_OK ; } -/* Tries to find a breakpoint at the specified address. */ -static struct whpx_breakpoint *whpx_lookup_breakpoint_by_addr (uint64_t address) -{ -struct whpx_state *whpx = &whpx_global; -int i; - -if (whpx->breakpoints.breakpoints) { -for (i =0 ; i < whpx->breakpoints.breakpoints->used; i++) { -if (address == whpx->breakpoints.breakpoints->data[i].address) { -return &whpx->breakpoints.breakpoints->data[i]; - } - } - } - -return NULL ; -} -/* * Linux uses int3 (0xCC) during startup (see int3_selftest()) and for * debugging user-mode applications. Since the WHPX API does not offer @@ -1136,7 +1102,7 @@ static const uint8_t whpx_breakpoint_instruction = 0xF1;* memory, but doesn't actually do it. The memory accessing is done in * whpx_apply_breakpoints(). */ -static void whpx_translate_cpu_breakpoints ( +void whpx_translate_cpu_breakpoints (struct whpx_breakpoints *breakpoints,CPUState *cpu,int cpu_breakpoint_count)@@ -1230,7 +1196,7 @@ static void whpx_translate_cpu_breakpoints(* Passing resuming=true will try to set all previously unset breakpoints. * Passing resuming=false will remove all inserted ones. */ -static void whpx_apply_breakpoints ( +void whpx_apply_breakpoints (struct whpx_breakpoint_collection *breakpoints,CPUState *cpu,bool resuming)@@ -1306,93 +1272,6 @@ static void whpx_apply_breakpoints( } } -/* -* This function is called when the a VCPU is about to start and no other -* VCPUs have been started so far. Since the VCPU start order could be -* arbitrary, it doesn't have to be VCPU#0. -* -* It is used to commit the breakpoints into memory, and configure WHPX -* to intercept debug exceptions. -* -* Note that whpx_set_exception_exit_bitmap() cannot be called if one or -* more VCPUs are already running, so this is the best place to do it. -*/ -static int whpx_first_vcpu_starting (CPUState *cpu) -{ -struct whpx_state *whpx = &whpx_global; -HRESULT hr; - -g_assert (bql_locked ()); - -if (!QTAILQ_EMPTY (&cpu->breakpoints) || - (whpx->breakpoints.breakpoints && - whpx->breakpoints.breakpoints->used)) { -CPUBreakpoint *bp; -int i =0 ; -bool update_pending = false; - - QTAILQ_FOREACH(bp, &cpu->breakpoints, entry) { -if (i >= whpx->breakpoints.original_address_count || - bp->pc != whpx->breakpoints.original_addresses[i]) { - update_pending = true; - } - - i++; - } - -if (i != whpx->breakpoints.original_address_count) { - update_pending = true; - } - -if (update_pending) { -/* -* The CPU breakpoints have changed since the last call to -* whpx_translate_cpu_breakpoints(). WHPX breakpoints must -* now be recomputed. -*/ -whpx_translate_cpu_breakpoints (&whpx->breakpoints, cpu, i); - } - -/* Actually insert the breakpoints into the memory. */ -whpx_apply_breakpoints (whpx->breakpoints.breakpoints, cpu, true); - } - -uint64_t exception_mask; -if (whpx->step_pending || - (whpx->breakpoints.breakpoints && - whpx->breakpoints.breakpoints->used)) { -/* -* We are either attempting to single-step one or more CPUs, or -* have one or more breakpoints enabled. Both require intercepting -* the WHvX64ExceptionTypeBreakpointTrap exception. -*/ - - exception_mask =1UL << WHvX64ExceptionTypeDebugTrapOrFault; - }else { -/* Let the guest handle all exceptions. */ - exception_mask =0 ; - } - - hr =whpx_set_exception_exit_bitmap (exception_mask); -if (!SUCCEEDED (hr)) { -error_report ("WHPX: Failed to update exception exit mask," -"hr=%08lx." , hr); -return 1 ; - } - -return 0 ; -} - -/* -* This function is called when the last VCPU has finished running. -* It is used to remove any previously set breakpoints from memory. -*/ -static int whpx_last_vcpu_stopping (CPUState *cpu) -{ -whpx_apply_breakpoints (whpx_global.breakpoints.breakpoints, cpu, false); -return 0 ; -} -/* Returns the address of the next instruction that is about to be executed. */ static vaddr whpx_vcpu_get_pc (CPUState *cpu,bool exit_context_valid) {@@ -1634,7 +1513,7 @@ static void whpx_vcpu_process_async_events(CPUState *cpu) } } -static int whpx_vcpu_run (CPUState *cpu) +int whpx_vcpu_run (CPUState *cpu) {HRESULT hr;struct whpx_state *whpx = &whpx_global;@@ -2057,65 +1936,6 @@ static int whpx_vcpu_run(CPUState *cpu)return ret <0 ; } -static void do_whpx_cpu_synchronize_state (CPUState *cpu,run_on_cpu_data arg) -{ -if (!cpu->vcpu_dirty) { -whpx_get_registers (cpu); - cpu->vcpu_dirty = true; - } -} - -static void do_whpx_cpu_synchronize_post_reset (CPUState *cpu, -run_on_cpu_data arg) -{ -whpx_set_registers (cpu,WHPX_SET_RESET_STATE ); - cpu->vcpu_dirty = false; -} - -static void do_whpx_cpu_synchronize_post_init (CPUState *cpu, -run_on_cpu_data arg) -{ -whpx_set_registers (cpu,WHPX_SET_FULL_STATE ); - cpu->vcpu_dirty = false; -} - -static void do_whpx_cpu_synchronize_pre_loadvm (CPUState *cpu, -run_on_cpu_data arg) -{ - cpu->vcpu_dirty = true; -} - -/* -* CPU support. -*/ - -void whpx_cpu_synchronize_state (CPUState *cpu) -{ -if (!cpu->vcpu_dirty) { -run_on_cpu (cpu, do_whpx_cpu_synchronize_state,RUN_ON_CPU_NULL ); - } -} - -void whpx_cpu_synchronize_post_reset (CPUState *cpu) -{ -run_on_cpu (cpu, do_whpx_cpu_synchronize_post_reset,RUN_ON_CPU_NULL ); -} - -void whpx_cpu_synchronize_post_init (CPUState *cpu) -{ -run_on_cpu (cpu, do_whpx_cpu_synchronize_post_init,RUN_ON_CPU_NULL ); -} - -void whpx_cpu_synchronize_pre_loadvm (CPUState *cpu) -{ -run_on_cpu (cpu, do_whpx_cpu_synchronize_pre_loadvm,RUN_ON_CPU_NULL ); -} - -static void whpx_pre_resume_vm (AccelState *as,bool step_pending) -{ - whpx_global.step_pending = step_pending; -} -/* * Vcpu support. */ @@ -2244,295 +2064,18 @@ error:return ret; } -int whpx_vcpu_exec (CPUState *cpu) -{ -int ret; -int fatal; - -for (;;) { -if (cpu->exception_index >=EXCP_INTERRUPT ) { - ret = cpu->exception_index; - cpu->exception_index =-1 ; -break ; - } - - fatal =whpx_vcpu_run (cpu); - -if (fatal) { -error_report ("WHPX: Failed to exec a virtual processor" ); -abort (); - } - } - -return ret; -} - -void whpx_destroy_vcpu (CPUState *cpu) -{ -struct whpx_state *whpx = &whpx_global; -AccelCPUState *vcpu = cpu->accel; - - whp_dispatch.WHvDeleteVirtualProcessor (whpx->partition, cpu->cpu_index); - whp_dispatch.WHvEmulatorDestroyEmulator (vcpu->emulator); -g_free (cpu->accel); -} - -void whpx_vcpu_kick (CPUState *cpu) -{ -struct whpx_state *whpx = &whpx_global; - whp_dispatch.WHvCancelRunVirtualProcessor ( - whpx->partition, cpu->cpu_index,0 ); -} - -/* -* Memory support. -*/ - -static void whpx_update_mapping (hwaddr start_pa,ram_addr_t size, -void *host_va,int add,int rom, -const char *name) -{ -struct whpx_state *whpx = &whpx_global; -HRESULT hr; - -/* -if (add) { -printf("WHPX: ADD PA:%p Size:%p, Host:%p, %s, '%s'\n", -(void*)start_pa, (void*)size, host_va, -(rom ? "ROM" : "RAM"), name); -} else { -printf("WHPX: DEL PA:%p Size:%p, Host:%p, '%s'\n", -(void*)start_pa, (void*)size, host_va, name); -} -*/ - -if (add) { - hr = whp_dispatch.WHvMapGpaRange (whpx->partition, - host_va, - start_pa, - size, - (WHvMapGpaRangeFlagRead | - WHvMapGpaRangeFlagExecute | - (rom ?0 : WHvMapGpaRangeFlagWrite))); - }else { - hr = whp_dispatch.WHvUnmapGpaRange (whpx->partition, - start_pa, - size); - } - -if (FAILED (hr)) { -error_report ("WHPX: Failed to %s GPA range '%s' PA:%p, Size:%p bytes," -" Host:%p, hr=%08lx" , - (add ?"MAP" :"UNMAP" ), name, - (void *)(uintptr_t )start_pa, (void *)size, host_va, hr); - } -} - -static void whpx_process_section (MemoryRegionSection *section,int add) -{ -MemoryRegion *mr = section->mr; -hwaddr start_pa = section->offset_within_address_space; -ram_addr_t size =int128_get64 (section->size); -unsigned int delta; -uint64_t host_va; - -if (!memory_region_is_ram (mr)) { -return ; - } - - delta =qemu_real_host_page_size () - (start_pa & ~qemu_real_host_page_mask ()); - delta &= ~qemu_real_host_page_mask (); -if (delta > size) { -return ; - } - start_pa += delta; - size -= delta; - size &=qemu_real_host_page_mask (); -if (!size || (start_pa & ~qemu_real_host_page_mask ())) { -return ; - } - - host_va = (uintptr_t )memory_region_get_ram_ptr (mr) - + section->offset_within_region + delta; - -whpx_update_mapping (start_pa, size, (void *)(uintptr_t )host_va, add, -memory_region_is_rom (mr), mr->name); -} - -static void whpx_region_add (MemoryListener *listener, -MemoryRegionSection *section) -{ -memory_region_ref (section->mr); -whpx_process_section (section,1 ); -} - -static void whpx_region_del (MemoryListener *listener, -MemoryRegionSection *section) -{ -whpx_process_section (section,0 ); -memory_region_unref (section->mr); -} - -static void whpx_transaction_begin (MemoryListener *listener) -{ -} - -static void whpx_transaction_commit (MemoryListener *listener) -{ -} - -static void whpx_log_sync (MemoryListener *listener, -MemoryRegionSection *section) -{ -MemoryRegion *mr = section->mr; - -if (!memory_region_is_ram (mr)) { -return ; - } - -memory_region_set_dirty (mr,0 ,int128_get64 (section->size)); -} - -static MemoryListener whpx_memory_listener = { - .name ="whpx" , - .begin = whpx_transaction_begin, - .commit = whpx_transaction_commit, - .region_add = whpx_region_add, - .region_del = whpx_region_del, - .log_sync = whpx_log_sync, - .priority =MEMORY_LISTENER_PRIORITY_ACCEL , -}; - -static void whpx_memory_init (void ) -{ -memory_listener_register (&whpx_memory_listener, &address_space_memory); -} - -/* -* Load the functions from the given library, using the given handle. If a -* handle is provided, it is used, otherwise the library is opened. The -* handle will be updated on return with the opened one. -*/ -static bool load_whp_dispatch_fns (HMODULE *handle, -WHPFunctionList function_list) -{ -HMODULE hLib = *handle; - -#define WINHV_PLATFORM_DLL "WinHvPlatform.dll" -#define WINHV_EMULATION_DLL "WinHvEmulation.dll" -#define WHP_LOAD_FIELD_OPTIONAL (return_type, function_name, signature) \ - whp_dispatch.function_name = \ - (function_name ## _t)GetProcAddress(hLib, #function_name); \ - -#define WHP_LOAD_FIELD (return_type, function_name, signature) \ - whp_dispatch.function_name = \ - (function_name ## _t)GetProcAddress(hLib, #function_name); \ - if (!whp_dispatch.function_name) { \ - error_report("Could not load function %s", #function_name); \ - goto error; \ - } \ - -#define WHP_LOAD_LIB (lib_name, handle_lib) \ - if (!handle_lib) { \ - handle_lib = LoadLibrary(lib_name); \ - if (!handle_lib) { \ - error_report("Could not load library %s.", lib_name); \ - goto error; \ - } \ - } \ - -switch (function_list) { -case WINHV_PLATFORM_FNS_DEFAULT : - WHP_LOAD_LIB(WINHV_PLATFORM_DLL, hLib) -LIST_WINHVPLATFORM_FUNCTIONS (WHP_LOAD_FIELD) - break; - -case WINHV_EMULATION_FNS_DEFAULT : - WHP_LOAD_LIB(WINHV_EMULATION_DLL, hLib) -LIST_WINHVEMULATION_FUNCTIONS (WHP_LOAD_FIELD) - break; - -case WINHV_PLATFORM_FNS_SUPPLEMENTAL : - WHP_LOAD_LIB(WINHV_PLATFORM_DLL, hLib) -LIST_WINHVPLATFORM_FUNCTIONS_SUPPLEMENTAL (WHP_LOAD_FIELD_OPTIONAL) - break; - } - - *handle = hLib; -return true; - -error: -if (hLib) { -FreeLibrary (hLib); - } - -return false; -} - -static void whpx_set_kernel_irqchip (Object *obj,Visitor *v, -const char *name,void *opaque, -Error **errp) -{ -struct whpx_state *whpx = &whpx_global; -OnOffSplit mode; - -if (!visit_type_OnOffSplit (v, name, &mode, errp)) { -return ; - } - -switch (mode) { -case ON_OFF_SPLIT_ON : - whpx->kernel_irqchip_allowed = true; - whpx->kernel_irqchip_required = true; -break ; - -case ON_OFF_SPLIT_OFF : - whpx->kernel_irqchip_allowed = false; - whpx->kernel_irqchip_required = false; -break ; - -case ON_OFF_SPLIT_SPLIT : -error_setg (errp,"WHPX: split irqchip currently not supported" ); -error_append_hint (errp, -"Try without kernel-irqchip or with kernel-irqchip=on|off" ); -break ; - -default : -/* -* The value was checked in visit_type_OnOffSplit() above. If -* we get here, then something is wrong in QEMU. -*/ -abort (); - } -} - -static void whpx_cpu_instance_init (CPUState *cs) +void whpx_cpu_instance_init (CPUState *cs) {X86CPU *cpu =X86_CPU (cs);host_cpu_instance_init (cpu); } -static void whpx_cpu_accel_class_init (ObjectClass *oc,const void *data) -{ -AccelCPUClass *acc =ACCEL_CPU_CLASS (oc); - - acc->cpu_instance_init = whpx_cpu_instance_init; -} - -static const TypeInfo whpx_cpu_accel_type = { - .name =ACCEL_CPU_NAME ("whpx" ), - - .parent =TYPE_ACCEL_CPU , - .class_init = whpx_cpu_accel_class_init, - .abstract = true, -}; -/* * Partition support */ -static int whpx_accel_init (AccelState *as,MachineState *ms) +int whpx_accel_init (AccelState *as,MachineState *ms) {struct whpx_state *whpx;int ret;@@ -2715,77 +2258,3 @@ error:return ret; } - -bool whpx_apic_in_platform (void ) { -return whpx_global.apic_in_platform; -} - -static void whpx_accel_class_init (ObjectClass *oc,const void *data) -{ -AccelClass *ac =ACCEL_CLASS (oc); - ac->name ="WHPX" ; - ac->init_machine = whpx_accel_init; - ac->pre_resume_vm = whpx_pre_resume_vm; - ac->allowed = &whpx_allowed; - -object_class_property_add (oc,"kernel-irqchip" ,"on|off|split" , -NULL , whpx_set_kernel_irqchip, -NULL ,NULL ); -object_class_property_set_description (oc,"kernel-irqchip" , -"Configure WHPX in-kernel irqchip" ); -} - -static void whpx_accel_instance_init (Object *obj) -{ -struct whpx_state *whpx = &whpx_global; - -memset (whpx,0 ,sizeof (struct whpx_state )); -/* Turn on kernel-irqchip, by default */ - whpx->kernel_irqchip_allowed = true; -} - -static const TypeInfo whpx_accel_type = { - .name =ACCEL_CLASS_NAME ("whpx" ), - .parent =TYPE_ACCEL , - .instance_init = whpx_accel_instance_init, - .class_init = whpx_accel_class_init, -}; - -static void whpx_type_init (void ) -{ -type_register_static (&whpx_accel_type); -type_register_static (&whpx_cpu_accel_type); -} - -bool init_whp_dispatch (void ) -{ -if (whp_dispatch_initialized) { -return true; - } - -if (!load_whp_dispatch_fns (&hWinHvPlatform,WINHV_PLATFORM_FNS_DEFAULT )) { - goto error; - } - -if (!load_whp_dispatch_fns (&hWinHvEmulation,WINHV_EMULATION_FNS_DEFAULT )) { - goto error; - } - -assert (load_whp_dispatch_fns (&hWinHvPlatform, -WINHV_PLATFORM_FNS_SUPPLEMENTAL )); - whp_dispatch_initialized = true; - -return true; -error: -if (hWinHvPlatform) { -FreeLibrary (hWinHvPlatform); - } - -if (hWinHvEmulation) { -FreeLibrary (hWinHvEmulation); - } - -return false; -} - -type_init (whpx_type_init);
Re: [PATCH v12 11/28] whpx: reshuffle common code
Quoted 5 lines · Pierrick Bouvier
ERROR: New file '
accel/whpx/whpx-common.c' must not have license boilerplate header text, only the SPDX-License-Identifier, unless this file was copied from existing code already having such text.
Hello,
Deliberately didn’t do it because it’s copying chunks of the existing x86_64 WHPX backend.
Should I still do it despite that?
Thank you,
-Mohamed
Re: [PATCH v12 11/28] whpx: reshuffle common code
Quoted 4 lines · Mohamed Mediouni
Quoted 4 lines · Pierrick Bouvier
Quoted 8 lines
Quoted 1 line
ERROR: New file '
accel/whpx/whpx-common.c' must not have license boilerplate header text, only the SPDX-License-Identifier, unless this file was copied from existing code already having such text.Hello,
Deliberately didn’t do it because it’s copying chunks of the existing
x86_64WHPX backend.Should I still do it despite that?
I think you can remove the GPL boilerplate part yes.
Quoted 2 lines
Thank you,
-Mohamed
PATCH v12 12/28 whpx: ifdef out winhvemulation on non-x86_64
In reply to Mohamed Mediouniwinhvemulation is x86_64 only.
In the future, we might want to get rid of winhvemulation usage entirely.
--- accel/whpx/whpx-common.c | 14 ++++++++++++-- include/system/whpx-common.h | 2 ++ include/system/whpx-internal.h | 7 ++++++- 3 files changed, 20 insertions(+), 3 deletions(-)
accel/whpx/whpx-common.c +12 -2
@@ -41,7 +41,9 @@bool whpx_allowed;static bool whp_dispatch_initialized;static HMODULE hWinHvPlatform; +#ifdef HOST_X86_64 static HMODULE hWinHvEmulation; +#endif struct whpx_state whpx_global;struct WHPDispatch whp_dispatch;
@@ -236,8 +238,10 @@ void whpx_destroy_vcpu(CPUState *cpu)struct whpx_state *whpx = &whpx_global; whp_dispatch.WHvDeleteVirtualProcessor (whpx->partition, cpu->cpu_index); +#ifdef HOST_X86_64 AccelCPUState *vcpu = cpu->accel; whp_dispatch.WHvEmulatorDestroyEmulator (vcpu->emulator); +#endif g_free (cpu->accel); }
@@ -412,8 +416,12 @@ static bool load_whp_dispatch_fns(HMODULE *handle,LIST_WINHVPLATFORM_FUNCTIONS (WHP_LOAD_FIELD) break;case WINHV_EMULATION_FNS_DEFAULT : +#ifdef HOST_X86_64 WHP_LOAD_LIB(WINHV_EMULATION_DLL, hLib) LIST_WINHVEMULATION_FUNCTIONS(WHP_LOAD_FIELD) +#else +g_assert_not_reached (); +#endif break ;case WINHV_PLATFORM_FNS_SUPPLEMENTAL :WHP_LOAD_LIB (WINHV_PLATFORM_DLL , hLib)
@@ -539,11 +547,11 @@ bool init_whp_dispatch(void)if (!load_whp_dispatch_fns (&hWinHvPlatform,WINHV_PLATFORM_FNS_DEFAULT )) { goto error; } - +#ifdef HOST_X86_64 if (!load_whp_dispatch_fns (&hWinHvEmulation,WINHV_EMULATION_FNS_DEFAULT )) { goto error; } - +#endif assert (load_whp_dispatch_fns (&hWinHvPlatform,WINHV_PLATFORM_FNS_SUPPLEMENTAL )); whp_dispatch_initialized = true;
@@ -553,9 +561,11 @@ error:if (hWinHvPlatform) {FreeLibrary (hWinHvPlatform); } +#ifdef HOST_X86_64 if (hWinHvEmulation) {FreeLibrary (hWinHvEmulation); } +#endif return false; }
include/system/whpx-common.h +2 -0
@@ -3,7 +3,9 @@#define SYSTEM_WHPX_COMMON_H struct AccelCPUState { +#ifdef HOST_X86_64 WHV_EMULATOR_HANDLE emulator; +#endif bool window_registered;bool interruptable;bool ready_for_pic_interrupt;
include/system/whpx-internal.h +6 -1
@@ -4,8 +4,9 @@#include <windows.h> #include <winhvplatform.h> +#ifdef HOST_X86_64 #include <winhvemulation.h> - +#endif #include "hw/i386/apic.h" #include "exec/vaddr.h"
@@ -101,12 +102,16 @@ void whpx_apic_get(APICCommonState *s);/* Define function typedef */ LIST_WINHVPLATFORM_FUNCTIONS(WHP_DEFINE_TYPE) +#ifdef HOST_X86_64 LIST_WINHVEMULATION_FUNCTIONS(WHP_DEFINE_TYPE) +#endif LIST_WINHVPLATFORM_FUNCTIONS_SUPPLEMENTAL (WHP_DEFINE_TYPE) struct WHPDispatch { LIST_WINHVPLATFORM_FUNCTIONS(WHP_DECLARE_MEMBER) +#ifdef HOST_X86_64 LIST_WINHVEMULATION_FUNCTIONS(WHP_DECLARE_MEMBER) +#endif LIST_WINHVPLATFORM_FUNCTIONS_SUPPLEMENTAL(WHP_DECLARE_MEMBER) };
Signature · 1 line
2.50.1 (Apple Git-155)
PATCH v12 13/28 whpx: common: add WHPX_INTERCEPT_DEBUG_TRAPS define
In reply to Mohamed MediouniAs of why: WHPX on arm64 doesn't have debug trap support as of today.
Keep the exception bitmap interface for now - despite that being entirely unavailable on arm64 too.
--- accel/whpx/whpx-common.c | 2 +- include/system/whpx-common.h | 3 +++ 2 files changed, 4 insertions(+), 1 deletion(-)
accel/whpx/whpx-common.c +1 -1
@@ -123,7 +123,7 @@ int whpx_first_vcpu_starting(CPUState *cpu)* have one or more breakpoints enabled. Both require intercepting * the WHvX64ExceptionTypeBreakpointTrap exception. */ - exception_mask =1UL << WHvX64ExceptionTypeDebugTrapOrFault; + exception_mask =1UL <<WHPX_INTERCEPT_DEBUG_TRAPS ; }else {/* Let the guest handle all exceptions. */ exception_mask =0 ;
include/system/whpx-common.h +3 -0
@@ -20,4 +20,7 @@ int whpx_first_vcpu_starting(CPUState *cpu);int whpx_last_vcpu_stopping (CPUState *cpu);void whpx_memory_init (void );struct whpx_breakpoint *whpx_lookup_breakpoint_by_addr (uint64_t address); + +/* On x64: same as WHvX64ExceptionTypeDebugTrapOrFault */ +#define WHPX_INTERCEPT_DEBUG_TRAPS 1#endif
Signature · 1 line
2.50.1 (Apple Git-155)
PATCH v12 14/28 hw, target, accel: whpx: change apic_in_platform to kernel_irqchip
In reply to Mohamed MediouniChange terminology to match the KVM one, as APIC is x86-specific.
And move out whpx_irqchip_in_kernel() to make it usable from common code even when not compiling with WHPX support.
--- accel/stubs/whpx-stub.c | 1 + accel/whpx/whpx-accel-ops.c | 2 +- accel/whpx/whpx-common.c | 10 +--------- hw/i386/x86-cpu.c | 4 ++-- include/system/whpx-internal.h | 1 - include/system/whpx.h | 5 +++-- target/i386/cpu-apic.c | 2 +- target/i386/whpx/whpx-all.c | 14 +++++++------- 8 files changed, 16 insertions(+), 23 deletions(-)
accel/stubs/whpx-stub.c +1 -0
@@ -10,3 +10,4 @@#include "system/whpx.h" bool whpx_allowed; +bool whpx_irqchip_in_kernel;
accel/whpx/whpx-accel-ops.c +1 -1
@@ -78,7 +78,7 @@ static void whpx_kick_vcpu_thread(CPUState *cpu)static bool whpx_vcpu_thread_is_idle (CPUState *cpu) { -return !whpx_apic_in_platform (); +return !whpx_irqchip_in_kernel (); }static void whpx_accel_ops_class_init (ObjectClass *oc,const void *data)
accel/whpx/whpx-common.c +1 -9
@@ -39,6 +39,7 @@#include <winhvplatformdefs.h> bool whpx_allowed; +bool whpx_irqchip_in_kernel;static bool whp_dispatch_initialized;static HMODULE hWinHvPlatform;#ifdef HOST_X86_64
@@ -492,15 +493,6 @@ static const TypeInfo whpx_cpu_accel_type = { .abstract = true, }; -/* -* Partition support -*/ - -bool whpx_apic_in_platform (void ) -{ -return whpx_global.apic_in_platform; -} -static void whpx_accel_class_init (ObjectClass *oc,const void *data) {AccelClass *ac =ACCEL_CLASS (oc);
hw/i386/x86-cpu.c +2 -2
@@ -45,7 +45,7 @@ static void pic_irq_request(void *opaque, int irq, int level)trace_x86_pic_interrupt (irq, level);if (cpu_is_apic_enabled (cpu->apic_state) && !kvm_irqchip_in_kernel () && - !whpx_apic_in_platform ()) { + !whpx_irqchip_in_kernel ()) {CPU_FOREACH (cs) { cpu =X86_CPU (cs);if (apic_accept_pic_intr (cpu->apic_state)) {
@@ -71,7 +71,7 @@ int cpu_get_pic_interrupt(CPUX86State *env)X86CPU *cpu =env_archcpu (env);int intno; -if (!kvm_irqchip_in_kernel () && !whpx_apic_in_platform ()) { +if (!kvm_irqchip_in_kernel () && !whpx_irqchip_in_kernel ()) { intno =apic_get_interrupt (cpu->apic_state);if (intno >=0 ) {return intno;
include/system/whpx-internal.h +0 -1
@@ -45,7 +45,6 @@ struct whpx_state {bool kernel_irqchip_allowed;bool kernel_irqchip_required; -bool apic_in_platform; };extern struct whpx_state whpx_global;
include/system/whpx.h +3 -2
@@ -25,11 +25,12 @@#ifdef CONFIG_WHPX_IS_POSSIBLE extern bool whpx_allowed; +extern bool whpx_irqchip_in_kernel;#define whpx_enabled () (whpx_allowed) -bool whpx_apic_in_platform (void ); +#define whpx_irqchip_in_kernel () (whpx_irqchip_in_kernel)#else /* !CONFIG_WHPX_IS_POSSIBLE */ #define whpx_enabled () 0 -#define whpx_apic_in_platform () (0) +#define whpx_irqchip_in_kernel () (0)#endif /* !CONFIG_WHPX_IS_POSSIBLE */ #endif /* QEMU_WHPX_H */
target/i386/cpu-apic.c +1 -1
@@ -32,7 +32,7 @@ APICCommonClass *apic_get_class(Error **errp) apic_type ="kvm-apic" ; }else if (xen_enabled ()) { apic_type ="xen-apic" ; - }else if (whpx_apic_in_platform ()) { + }else if (whpx_irqchip_in_kernel ()) { apic_type ="whpx-apic" ; }
target/i386/whpx/whpx-all.c +7 -7
@@ -607,7 +607,7 @@ void whpx_get_registers(CPUState *cpu) hr); } -if (whpx_apic_in_platform ()) { +if (whpx_irqchip_in_kernel ()) {/* * Fetch the TPR value from the emulated APIC. It may get overwritten * below with the value from CR8 returned by
@@ -749,7 +749,7 @@ void whpx_get_registers(CPUState *cpu)assert (idx ==RTL_NUMBER_OF (whpx_register_names)); -if (whpx_apic_in_platform ()) { +if (whpx_irqchip_in_kernel ()) {whpx_apic_get (x86_cpu->apic_state); }
@@ -1379,7 +1379,7 @@ static void whpx_vcpu_pre_run(CPUState *cpu) }/* Get pending hard interruption or replay one that was overwritten */ -if (!whpx_apic_in_platform ()) { +if (!whpx_irqchip_in_kernel ()) {if (!vcpu->interruption_pending && vcpu->interruptable && (env->eflags &IF_MASK )) {assert (!new_int.InterruptionPending);
@@ -1553,7 +1553,7 @@ int whpx_vcpu_run(CPUState *cpu)if (exclusive_step_mode ==WHPX_STEP_NONE ) {whpx_vcpu_process_async_events (cpu); -if (cpu->halted && !whpx_apic_in_platform ()) { +if (cpu->halted && !whpx_irqchip_in_kernel ()) { cpu->exception_index =EXCP_HLT ;qatomic_set (&cpu->exit_request, false);return 0 ;
@@ -1642,7 +1642,7 @@ int whpx_vcpu_run(CPUState *cpu)break ;case WHvRunVpExitReasonX64ApicEoi: -assert (whpx_apic_in_platform ()); +assert (whpx_irqchip_in_kernel ());ioapic_eoi_broadcast (vcpu->exit_ctx.ApicEoi.InterruptVector);break ;
@@ -2187,7 +2187,7 @@ int whpx_accel_init(AccelState *as, MachineState *ms) goto error; } }else { - whpx->apic_in_platform = true; + whpx->kernel_irqchip = true; } }
@@ -2196,7 +2196,7 @@ int whpx_accel_init(AccelState *as, MachineState *ms) prop.ExtendedVmExits.X64MsrExit =1 ; prop.ExtendedVmExits.X64CpuidExit =1 ; prop.ExtendedVmExits.ExceptionExit =1 ; -if (whpx_apic_in_platform ()) { +if (whpx_irqchip_in_kernel ()) { prop.ExtendedVmExits.X64ApicInitSipiExitTrap =1 ; }
Signature · 1 line
2.50.1 (Apple Git-155)
Re: [PATCH v12 14/28] hw, target, accel: whpx: change apic_in_platform to kernel_irqchip
Quoted 6 lines · Mohamed Mediouni
Change terminology to match the KVM one, as APIC is x86-specific.
And move out
whpx_irqchip_in_kernel()to make it usable from common code even when not compiling with WHPX support.Signed-off-by Mohamed Mediouni <[email protected]>
Quoted 10 lines
--- accel/stubs/whpx-stub.c | 1 + accel/whpx/whpx-accel-ops.c | 2 +- accel/whpx/whpx-common.c | 10 +--------- hw/i386/x86-cpu.c | 4 ++-- include/system/whpx-internal.h | 1 - include/system/whpx.h | 5 +++-- target/i386/cpu-apic.c | 2 +- target/i386/whpx/whpx-all.c | 14 +++++++------- 8 files changed, 16 insertions(+), 23 deletions(-)
PATCH v12 15/28 whpx: interrupt controller support
In reply to Mohamed Mediouni--- hw/arm/virt.c | 3 + hw/intc/arm_gicv3_common.c | 3 + hw/intc/arm_gicv3_whpx.c | 239 +++++++++++++++++++++++++++++ hw/intc/meson.build | 1 + include/hw/intc/arm_gicv3_common.h | 3 + 5 files changed, 249 insertions(+) create mode 100644 hw/intc/arm_gicv3_whpx.c
hw/arm/virt.c +3 -0
@@ -49,6 +49,7 @@#include "system/tcg.h" #include "system/kvm.h" #include "system/hvf.h" +#include "system/whpx.h" #include "system/qtest.h" #include "system/system.h" #include "hw/core/loader.h"
@@ -2117,6 +2118,8 @@ static void finalize_gic_version(VirtMachineState *vms)/* KVM w/o kernel irqchip can only deal with GICv2 */ gics_supported |=VIRT_GIC_VERSION_2_MASK ; accel_name ="KVM with kernel-irqchip=off" ; + }else if (whpx_enabled ()) { + gics_supported |=VIRT_GIC_VERSION_3_MASK ; }else if (tcg_enabled () ||hvf_enabled () ||qtest_enabled ()) { gics_supported |=VIRT_GIC_VERSION_2_MASK ;if (module_object_class_by_name ("arm-gicv3" )) {
hw/intc/arm_gicv3_common.c +3 -0
@@ -32,6 +32,7 @@#include "gicv3_internal.h" #include "hw/arm/linux-boot-if.h" #include "system/kvm.h" +#include "system/whpx.h" static void gicv3_gicd_no_migration_shift_bug_post_load (GICv3State *cs)
@@ -663,6 +664,8 @@ const char *gicv3_class_name(void) {if (kvm_irqchip_in_kernel ()) {return "kvm-arm-gicv3" ; + }else if (whpx_enabled ()) { +return TYPE_WHPX_GICV3 ; }else {if (kvm_enabled ()) {error_report ("Userspace GICv3 is not supported with KVM" );
hw/intc/arm_gicv3_whpx.c new file +239 -0
239 lines not on this page · raw message
hw/intc/meson.build +1 -0
@@ -41,6 +41,7 @@ specific_ss.add(when: 'CONFIG_APIC', if_true: files('apic.c', 'apic_common.c')) arm_common_ss.add(when: 'CONFIG_ARM_GIC', if_true: files('arm_gicv3_cpuif_common.c')) arm_common_ss.add(when: 'CONFIG_ARM_GICV3', if_true: files('arm_gicv3_cpuif.c')) specific_ss.add(when: 'CONFIG_ARM_GIC_KVM', if_true: files('arm_gic_kvm.c')) +specific_ss.add(when: ['CONFIG_WHPX', 'TARGET_AARCH64'], if_true: files('arm_gicv3_whpx.c')) specific_ss.add(when: ['CONFIG_ARM_GIC_KVM', 'TARGET_AARCH64'], if_true: files('arm_gicv3_kvm.c', 'arm_gicv3_its_kvm.c')) arm_common_ss.add(when: 'CONFIG_ARM_V7M', if_true: files('armv7m_nvic.c')) specific_ss.add(when: 'CONFIG_GRLIB', if_true: files('grlib_irqmp.c'))
include/hw/intc/arm_gicv3_common.h +3 -0
@@ -313,6 +313,9 @@ typedef struct ARMGICv3CommonClass ARMGICv3CommonClass;DECLARE_OBJ_CHECKERS (GICv3State, ARMGICv3CommonClass,ARM_GICV3_COMMON ,TYPE_ARM_GICV3_COMMON ) +/* Types for GICv3 kernel-irqchip */ +#define TYPE_WHPX_GICV3 "whpx-arm-gicv3" +struct ARMGICv3CommonClass {/*< private >*/ SysBusDeviceClass parent_class;
Signature · 1 line
2.50.1 (Apple Git-155)
PATCH v12 16/28 whpx: add arm64 support
In reply to Mohamed Mediouni--- accel/whpx/whpx-common.c | 1 + target/arm/meson.build | 1 + target/arm/whpx/meson.build | 3 + target/arm/whpx/whpx-all.c | 845 ++++++++++++++++++++++++++++++++++++ 4 files changed, 850 insertions(+) create mode 100644 target/arm/whpx/meson.build create mode 100644 target/arm/whpx/whpx-all.c
accel/whpx/whpx-common.c +1 -0
@@ -16,6 +16,7 @@#include "gdbstub/helpers.h" #include "qemu/accel.h" #include "accel/accel-ops.h" +#include "system/memory.h" #include "system/whpx.h" #include "system/cpus.h" #include "system/runstate.h"
target/arm/meson.build +1 -0
@@ -59,6 +59,7 @@ arm_common_system_ss.add(files( )) subdir('hvf') +subdir('whpx') if 'CONFIG_TCG' in config_all_accel subdir('tcg')
target/arm/whpx/meson.build new file +3 -0
@@ -0,0 +1,3 @@ +arm_system_ss.add(when: 'CONFIG_WHPX', if_true: files( + 'whpx-all.c', +))
target/arm/whpx/whpx-all.c new file +845 -0
845 lines not on this page · raw message
Signature · 1 line
2.50.1 (Apple Git-155)
PATCH v12 17/28 whpx: change memory management logic
In reply to Mohamed MediouniThis allows edk2 to work on Arm, although u-boot is still not functional.
--- accel/whpx/whpx-common.c | 97 +++++++++++++++------------------------- 1 file changed, 36 insertions(+), 61 deletions(-)
accel/whpx/whpx-common.c +36 -61
@@ -259,89 +259,64 @@ void whpx_vcpu_kick(CPUState *cpu)* Memory support. */ -static void whpx_update_mapping (hwaddr start_pa,ram_addr_t size, -void *host_va,int add,int rom, -const char *name) +static void whpx_set_phys_mem (MemoryRegionSection *section,bool add) {struct whpx_state *whpx = &whpx_global; +MemoryRegion *area = section->mr; +bool writable = !area->readonly && !area->rom_device; +WHV_MAP_GPA_RANGE_FLAGS flags; +uint64_t page_size =qemu_real_host_page_size (); +uint64_t gva = section->offset_within_address_space; +uint64_t size =int128_get64 (section->size);HRESULT hr; +void *mem; -/* -if (add) { -printf("WHPX: ADD PA:%p Size:%p, Host:%p, %s, '%s'\n", -(void*)start_pa, (void*)size, host_va, -(rom ? "ROM" : "RAM"), name); -} else { -printf("WHPX: DEL PA:%p Size:%p, Host:%p, '%s'\n", -(void*)start_pa, (void*)size, host_va, name); -} -*/ - -if (add) { - hr = whp_dispatch.WHvMapGpaRange (whpx->partition, - host_va, - start_pa, - size, - (WHvMapGpaRangeFlagRead | - WHvMapGpaRangeFlagExecute | - (rom ?0 : WHvMapGpaRangeFlagWrite))); - }else { - hr = whp_dispatch.WHvUnmapGpaRange (whpx->partition, - start_pa, - size); - } - -if (FAILED (hr)) { -error_report ("WHPX: Failed to %s GPA range '%s' PA:%p, Size:%p bytes," -" Host:%p, hr=%08lx" , - (add ?"MAP" :"UNMAP" ), name, - (void *)(uintptr_t )start_pa, (void *)size, host_va, hr); +if (!memory_region_is_ram (area)) { +if (writable) { +return ; + }else if (!memory_region_is_romd (area)) { + add = false; + } } -} - -static void whpx_process_section (MemoryRegionSection *section,int add) -{ -MemoryRegion *mr = section->mr; -hwaddr start_pa = section->offset_within_address_space; -ram_addr_t size =int128_get64 (section->size); -unsigned int delta; -uint64_t host_va; -if (!memory_region_is_ram (mr)) { -return ; +if (!QEMU_IS_ALIGNED (size, page_size) || + !QEMU_IS_ALIGNED (gva, page_size)) { +/* Not page aligned, so we can not map as RAM */ + add = false; } - delta =qemu_real_host_page_size () - (start_pa & ~qemu_real_host_page_mask ()); - delta &= ~qemu_real_host_page_mask (); -if (delta > size) { -return ; - } - start_pa += delta; - size -= delta; - size &=qemu_real_host_page_mask (); -if (!size || (start_pa & ~qemu_real_host_page_mask ())) { +if (!add) { + hr = whp_dispatch.WHvUnmapGpaRange (whpx->partition, + gva, size); +if (FAILED (hr)) { +error_report ("WHPX: failed to unmap GPA range" ); +abort (); + }return ; } - host_va = (uintptr_t )memory_region_get_ram_ptr (mr) - + section->offset_within_region + delta; + flags = WHvMapGpaRangeFlagRead | WHvMapGpaRangeFlagExecute + | (writable ? WHvMapGpaRangeFlagWrite :0 ); + mem =memory_region_get_ram_ptr (area) + section->offset_within_region; -whpx_update_mapping (start_pa, size, (void *)(uintptr_t )host_va, add, -memory_region_is_rom (mr), mr->name); + hr = whp_dispatch.WHvMapGpaRange (whpx->partition, + mem, gva, size, flags); +if (FAILED (hr)) { +error_report ("WHPX: failed to map GPA range" ); +abort (); + } }static void whpx_region_add (MemoryListener *listener,MemoryRegionSection *section) { -memory_region_ref (section->mr); -whpx_process_section (section,1 ); +whpx_set_phys_mem (section, true); }static void whpx_region_del (MemoryListener *listener,MemoryRegionSection *section) { -whpx_process_section (section,0 ); -memory_region_unref (section->mr); +whpx_set_phys_mem (section, false); }static void whpx_transaction_begin (MemoryListener *listener)
Signature · 1 line
2.50.1 (Apple Git-155)
Re: [PATCH v12 17/28] whpx: change memory management logic
Quoted 6 lines · Mohamed Mediouni
This allows edk2 to work on Arm, although u-boot is still not functional.
Signed-off-by Mohamed Mediouni <[email protected]>--- accel/whpx/whpx-common.c | 97 +++++++++++++++------------------------- 1 file changed, 36 insertions(+), 61 deletions(-)
Re: [PATCH v12 17/28] whpx: change memory management logic
In reply to Mohamed MediouniQuoted 56 lines · Mohamed Mediouni
This allows edk2 to work on Arm, although u-boot is still not functional.
Signed-off-by Mohamed Mediouni <[email protected]>--- accel/whpx/whpx-common.c | 97 +++++++++++++++------------------------- 1 file changed, 36 insertions(+), 61 deletions(-)accel/whpx/whpx-common.c +8
-29@@ -259,89 +259,64 @@ void whpx_vcpu_kick(CPUState *cpu)* Memory support. */ -static void whpx_update_mapping (hwaddr start_pa,ram_addr_t size, -void *host_va,int add,int rom, -const char *name) +static void whpx_set_phys_mem (MemoryRegionSection *section,bool add) {struct whpx_state *whpx = &whpx_global; +MemoryRegion *area = section->mr; +bool writable = !area->readonly && !area->rom_device; +WHV_MAP_GPA_RANGE_FLAGS flags; +uint64_t page_size =qemu_real_host_page_size (); +uint64_t gva = section->offset_within_address_space; +uint64_t size =int128_get64 (section->size);HRESULT hr; +void *mem; -/* -if (add) { -printf("WHPX: ADD PA:%p Size:%p, Host:%p, %s, '%s'\n", -(void*)start_pa, (void*)size, host_va, -(rom ? "ROM" : "RAM"), name); -} else { -printf("WHPX: DEL PA:%p Size:%p, Host:%p, '%s'\n", -(void*)start_pa, (void*)size, host_va, name); -} -*/ - -if (add) { - hr = whp_dispatch.WHvMapGpaRange (whpx->partition, - host_va, - start_pa, - size, - (WHvMapGpaRangeFlagRead | - WHvMapGpaRangeFlagExecute | - (rom ?0 : WHvMapGpaRangeFlagWrite))); - }else { - hr = whp_dispatch.WHvUnmapGpaRange (whpx->partition, - start_pa, - size); - } - -if (FAILED (hr)) {
accel/whpx/whpx-common.c void whpx_vcpu_kick(CPUState *cpu) · line 279
Quoted 10 lines
accel/whpx/whpx-common.c +6
-4-error_report ("WHPX: Failed to %s GPA range '%s' PA:%p, Size:%p bytes," -" Host:%p, hr=%08lx" , - (add ?"MAP" :"UNMAP" ), name, - (void *)(uintptr_t )start_pa, (void *)size, host_va, hr); +if (!memory_region_is_ram (area)) { +if (writable) { +return ; + }else if (!memory_region_is_romd (area)) { + add = false; + }
ERROR: suspect code indent for conditional statements (8, 13) #48: FILE: accel/whpx/whpx-common.c:277:
+ } else if (!memory_region_is_romd(area)) {
+ add = false;
Seems like a false positive from checkpatch, easier to write a second if to workaround this.
Quoted 71 lines
accel/whpx/whpx-common.c +22
-28} -} - -static void whpx_process_section (MemoryRegionSection *section,int add) -{ -MemoryRegion *mr = section->mr; -hwaddr start_pa = section->offset_within_address_space; -ram_addr_t size =int128_get64 (section->size); -unsigned int delta; -uint64_t host_va; -if (!memory_region_is_ram (mr)) { -return ; +if (!QEMU_IS_ALIGNED (size, page_size) || + !QEMU_IS_ALIGNED (gva, page_size)) { +/* Not page aligned, so we can not map as RAM */ + add = false; } - delta =qemu_real_host_page_size () - (start_pa & ~qemu_real_host_page_mask ()); - delta &= ~qemu_real_host_page_mask (); -if (delta > size) { -return ; - } - start_pa += delta; - size -= delta; - size &=qemu_real_host_page_mask (); -if (!size || (start_pa & ~qemu_real_host_page_mask ())) { +if (!add) { + hr = whp_dispatch.WHvUnmapGpaRange (whpx->partition, + gva, size); +if (FAILED (hr)) { +error_report ("WHPX: failed to unmap GPA range" ); +abort (); + }return ; } - host_va = (uintptr_t )memory_region_get_ram_ptr (mr) - + section->offset_within_region + delta; + flags = WHvMapGpaRangeFlagRead | WHvMapGpaRangeFlagExecute + | (writable ? WHvMapGpaRangeFlagWrite :0 ); + mem =memory_region_get_ram_ptr (area) + section->offset_within_region; -whpx_update_mapping (start_pa, size, (void *)(uintptr_t )host_va, add, -memory_region_is_rom (mr), mr->name); + hr = whp_dispatch.WHvMapGpaRange (whpx->partition, + mem, gva, size, flags); +if (FAILED (hr)) { +error_report ("WHPX: failed to map GPA range" ); +abort (); + } }static void whpx_region_add (MemoryListener *listener,MemoryRegionSection *section) { -memory_region_ref (section->mr); -whpx_process_section (section,1 ); +whpx_set_phys_mem (section, true); }static void whpx_region_del (MemoryListener *listener,MemoryRegionSection *section) { -whpx_process_section (section,0 ); -memory_region_unref (section->mr); +whpx_set_phys_mem (section, false); }static void whpx_transaction_begin (MemoryListener *listener)
PATCH v12 18/28 target/arm: cpu: mark WHPX as supporting PSCI 1.3
In reply to Mohamed MediouniHyper-V supports PSCI 1.3, and that implementation is exposed through WHPX.
--- target/arm/cpu.c | 3 +++ 1 file changed, 3 insertions(+)
target/arm/cpu.c +3 -0
@@ -23,6 +23,7 @@#include "qemu/timer.h" #include "qemu/log.h" #include "exec/page-vary.h" +#include "system/whpx.h" #include "target/arm/idau.h" #include "qemu/module.h" #include "qapi/error.h"
@@ -1143,6 +1144,8 @@ static void arm_cpu_initfn(Object *obj)if (tcg_enabled () ||hvf_enabled ()) {/* TCG and HVF implement PSCI 1.1 */ cpu->psci_version =QEMU_PSCI_VERSION_1_1 ; + }else if (whpx_enabled ()) { + cpu->psci_version =QEMU_PSCI_VERSION_1_3 ; } }
Signature · 1 line
2.50.1 (Apple Git-155)
PATCH v12 19/28 whpx: arm64: clamp down IPA size
In reply to Mohamed MediouniCode taken from HVF and adapted for WHPX use. Note that WHPX doesn't have a default vs maximum IPA distinction.
--- hw/arm/virt.c | 32 ++++++++++++++++++++++++++ include/hw/core/boards.h | 1 + target/arm/whpx/meson.build | 2 ++ target/arm/whpx/whpx-all.c | 45 +++++++++++++++++++++++++++++++++++++ target/arm/whpx/whpx-stub.c | 15 +++++++++++++ target/arm/whpx_arm.h | 16 +++++++++++++ 6 files changed, 111 insertions(+) create mode 100644 target/arm/whpx/whpx-stub.c create mode 100644 target/arm/whpx_arm.h
hw/arm/virt.c +32 -0
@@ -72,6 +72,7 @@#include "hw/core/irq.h" #include "kvm_arm.h" #include "hvf_arm.h" +#include "whpx_arm.h" #include "hw/firmware/smbios.h" #include "qapi/visitor.h" #include "qapi/qapi-visit-common.h"
@@ -3315,6 +3316,36 @@ static int virt_kvm_type(MachineState *ms, const char *type_str)return fixed_ipa ?0 : requested_pa_size; } +static int virt_whpx_get_physical_address_range (MachineState *ms) +{ +VirtMachineState *vms =VIRT_MACHINE (ms); + +int max_ipa_size =whpx_arm_get_ipa_bit_size (); + +/* We freeze the memory map to compute the highest gpa */ +virt_set_memmap (vms, max_ipa_size); + +int requested_ipa_size =64 -clz64 (vms->highest_gpa); + +/* +* If we're <= the default IPA size just use the default. +* If we're above the default but below the maximum, round up to +* the maximum. hvf_arm_get_max_ipa_bit_size() conveniently only +* returns values that are valid ARM PARange values. +*/ +if (requested_ipa_size <= max_ipa_size) { + requested_ipa_size = max_ipa_size; + }else { +error_report ("-m and ,maxmem option values " +"require an IPA range (%d bits) larger than " +"the one supported by the host (%d bits)" , + requested_ipa_size, max_ipa_size); +return -1 ; + } + +return requested_ipa_size; +} +static int virt_hvf_get_physical_address_range (MachineState *ms) {VirtMachineState *vms =VIRT_MACHINE (ms);
@@ -3414,6 +3445,7 @@ static void virt_machine_class_init(ObjectClass *oc, const void *data) mc->get_default_cpu_node_id = virt_get_default_cpu_node_id; mc->kvm_type = virt_kvm_type; mc->hvf_get_physical_address_range = virt_hvf_get_physical_address_range; + mc->whpx_get_physical_address_range = virt_whpx_get_physical_address_range;assert (!mc->get_hotplug_handler); mc->get_hotplug_handler = virt_machine_get_hotplug_handler; hc->pre_plug = virt_machine_device_pre_plug_cb;
include/hw/core/boards.h +1 -0
@@ -278,6 +278,7 @@ struct MachineClass {void (*wakeup)(MachineState *state);int (*kvm_type)(MachineState *machine,const char *arg);int (*hvf_get_physical_address_range)(MachineState *machine); +int (*whpx_get_physical_address_range)(MachineState *machine);BlockInterfaceType block_default_type;int units_per_default_bus;
target/arm/whpx/meson.build +2 -0
@@ -1,3 +1,5 @@ arm_system_ss.add(when: 'CONFIG_WHPX', if_true: files( 'whpx-all.c', )) + +arm_common_system_ss.add(when: 'CONFIG_WHPX', if_false: files('whpx-stub.c'))
target/arm/whpx/whpx-all.c +45 -0
75 lines not on this page · raw message
target/arm/whpx/whpx-stub.c new file +15 -0
@@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* +* WHPX stubs for ARM +* +* Copyright (c) 2025 Mohamed Mediouni +* +*/ + +#include "qemu/osdep.h" +#include "whpx_arm.h" + +uint32_t whpx_arm_get_ipa_bit_size (void ) +{ +g_assert_not_reached (); +}
target/arm/whpx_arm.h new file +16 -0
@@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* +* WHPX support -- ARM specifics +* +* Copyright (c) 2025 Mohamed Mediouni +* +*/ + +#ifndef QEMU_WHPX_ARM_H +#define QEMU_WHPX_ARM_H + +#include "target/arm/cpu-qom.h" + +uint32_t whpx_arm_get_ipa_bit_size (void ); + +#endif
Signature · 1 line
2.50.1 (Apple Git-155)
PATCH v12 20/28 hw/arm, accel/hvf, whpx: unify get_physical_address_range between WHPX and HVF
In reply to Mohamed Mediouni--- accel/hvf/hvf-all.c | 7 +++++-- hw/arm/virt.c | 41 ++++---------------------------------- include/hw/core/boards.h | 4 ++-- include/system/hvf_int.h | 5 +++++ target/arm/hvf-stub.c | 20 ------------------- target/arm/hvf/hvf.c | 6 +++--- target/arm/hvf_arm.h | 3 --- target/arm/meson.build | 1 - target/arm/whpx/whpx-all.c | 5 +++-- target/i386/hvf/hvf.c | 11 ++++++++++ 10 files changed, 33 insertions(+), 70 deletions(-) delete mode 100644 target/arm/hvf-stub.c
accel/hvf/hvf-all.c +5 -2
@@ -17,6 +17,7 @@#include "system/hvf_int.h" #include "hw/core/cpu.h" #include "hw/core/boards.h" +#include "target/arm/hvf_arm.h" #include "trace.h" bool hvf_allowed;
@@ -256,8 +257,10 @@ static int hvf_accel_init(AccelState *as, MachineState *ms)int pa_range =36 ;MachineClass *mc =MACHINE_GET_CLASS (ms); -if (mc->hvf_get_physical_address_range) { - pa_range = mc->hvf_get_physical_address_range (ms); + +if (mc->get_physical_address_range) { + pa_range = mc->get_physical_address_range (ms, +hvf_arch_get_default_ipa_bit_size (),hvf_arch_get_max_ipa_bit_size ());if (pa_range <0 ) {return -EINVAL ; }
hw/arm/virt.c +4 -37
62 lines not on this page · raw message
include/hw/core/boards.h +2 -2
@@ -277,8 +277,8 @@ struct MachineClass {void (*reset)(MachineState *state,ResetType type);void (*wakeup)(MachineState *state);int (*kvm_type)(MachineState *machine,const char *arg); -int (*hvf_get_physical_address_range)(MachineState *machine); -int (*whpx_get_physical_address_range)(MachineState *machine); +int (*get_physical_address_range)(MachineState *machine, +int default_ipa_size,int max_ipa_size);BlockInterfaceType block_default_type;int units_per_default_bus;
include/system/hvf_int.h +5 -0
@@ -73,6 +73,8 @@ void assert_hvf_ok_impl(hv_return_t ret, const char *file, unsigned int line,const char *hvf_return_string (hv_return_t ret);int hvf_arch_init (void );hv_return_t hvf_arch_vm_create (MachineState *ms,uint32_t pa_range); +uint32_t hvf_arch_get_default_ipa_bit_size (void ); +uint32_t hvf_arch_get_max_ipa_bit_size (void );hvf_slot *hvf_find_overlap_slot (uint64_t ,uint64_t );void hvf_kick_vcpu_thread (CPUState *cpu);
@@ -120,4 +122,7 @@ int hvf_update_guest_debug(CPUState *cpu);*/ bool hvf_arch_supports_guest_debug (void ); +uint32_t hvf_arch_get_default_ipa_bit_size (void ); +uint32_t hvf_arch_get_max_ipa_bit_size (void ); +#endif
target/arm/hvf-stub.c deleted +0 -20
@@ -1,20 +0,0 @@ -/* -* QEMU Hypervisor.framework (HVF) stubs for ARM -* -* Copyright (c) Linaro -* -* SPDX-License-Identifier: GPL-2.0-or-later -*/ - -#include "qemu/osdep.h" -#include "hvf_arm.h" - -uint32_t hvf_arm_get_default_ipa_bit_size (void ) -{ -g_assert_not_reached (); -} - -uint32_t hvf_arm_get_max_ipa_bit_size (void ) -{ -g_assert_not_reached (); -}
target/arm/hvf/hvf.c +3 -3
@@ -731,7 +731,7 @@ static uint64_t hvf_get_reg(CPUState *cpu, int rt)static void clamp_id_aa64mmfr0_parange_to_ipa_size (ARMISARegisters *isar) {uint32_t ipa_size = chosen_ipa_bit_size ? - chosen_ipa_bit_size :hvf_arm_get_max_ipa_bit_size (); + chosen_ipa_bit_size :hvf_arch_get_max_ipa_bit_size ();uint64_t id_aa64mmfr0;/* Clamp down the PARange to the IPA size the kernel supports. */
@@ -827,7 +827,7 @@ static bool hvf_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf)return r ==HV_SUCCESS ; } -uint32_t hvf_arm_get_default_ipa_bit_size (void ) +uint32_t hvf_arch_get_default_ipa_bit_size (void ) {uint32_t default_ipa_size;hv_return_t ret =hv_vm_config_get_default_ipa_size (&default_ipa_size);
@@ -836,7 +836,7 @@ uint32_t hvf_arm_get_default_ipa_bit_size(void)return default_ipa_size; } -uint32_t hvf_arm_get_max_ipa_bit_size (void ) +uint32_t hvf_arch_get_max_ipa_bit_size (void ) {uint32_t max_ipa_size;hv_return_t ret =hv_vm_config_get_max_ipa_size (&max_ipa_size);
target/arm/hvf_arm.h +0 -3
@@ -22,7 +22,4 @@ void hvf_arm_init_debug(void);void hvf_arm_set_cpu_features_from_host (ARMCPU *cpu); -uint32_t hvf_arm_get_default_ipa_bit_size (void ); -uint32_t hvf_arm_get_max_ipa_bit_size (void ); -#endif
target/arm/meson.build +0 -1
@@ -41,7 +41,6 @@ arm_common_system_ss.add(files('cpu.c')) arm_common_system_ss.add(when: 'TARGET_AARCH64', if_false: files( 'cpu32-stubs.c')) arm_common_system_ss.add(when: 'CONFIG_KVM', if_false: files('kvm-stub.c')) -arm_common_system_ss.add(when: 'CONFIG_HVF', if_false: files('hvf-stub.c')) arm_common_system_ss.add(when: 'CONFIG_ARM_COMPATIBLE_SEMIHOSTING', if_true: files('common-semi-target.c')) arm_common_system_ss.add(files(
target/arm/whpx/whpx-all.c +3 -2
@@ -805,8 +805,9 @@ int whpx_accel_init(AccelState *as, MachineState *ms) goto error; } -if (mc->whpx_get_physical_address_range) { - pa_range = mc->whpx_get_physical_address_range (ms); +if (mc->get_physical_address_range) { + pa_range = mc->get_physical_address_range (ms, +whpx_arm_get_ipa_bit_size (),whpx_arm_get_ipa_bit_size ());if (pa_range <0 ) {return -EINVAL ; }
target/i386/hvf/hvf.c +11 -0
@@ -225,6 +225,17 @@ int hvf_arch_init(void)return 0 ; } +/* 48-bit on all Intel Macs. Function currently unused. */ +uint32_t hvf_arch_get_default_ipa_bit_size (void ) +{ +g_assert_not_reached (); +} + +uint32_t hvf_arch_get_max_ipa_bit_size (void ) +{ +g_assert_not_reached (); +} +hv_return_t hvf_arch_vm_create (MachineState *ms,uint32_t pa_range) {return hv_vm_create (HV_VM_DEFAULT );
Signature · 1 line
2.50.1 (Apple Git-155)
PATCH v12 21/28 whpx: arm64: implement -cpu host
In reply to Mohamed MediouniLogic to fetch MIDR_EL1 for cpu 0 adapted from:
https://github.com/FEX-Emu/FEX/blob/e6de17e72ef03aa88ba14fa0ec13163061608c74/Source/Windows/Common/CPUFeatures.cpp#L62
--- target/arm/cpu64.c | 17 +++--- target/arm/whpx/whpx-all.c | 104 +++++++++++++++++++++++++++++++++++++ target/arm/whpx_arm.h | 1 + 3 files changed, 116 insertions(+), 6 deletions(-)
target/arm/cpu64.c +11 -6
@@ -26,10 +26,13 @@#include "qemu/units.h" #include "system/kvm.h" #include "system/hvf.h" +#include "system/whpx.h" +#include "system/hw_accel.h" #include "system/qtest.h" #include "system/tcg.h" #include "kvm_arm.h" #include "hvf_arm.h" +#include "whpx_arm.h" #include "qapi/visitor.h" #include "hw/core/qdev-properties.h" #include "internals.h"
@@ -521,7 +524,7 @@ void arm_cpu_pauth_finalize(ARMCPU *cpu, Error **errp) isar2 =FIELD_DP64 (isar2,ID_AA64ISAR2 ,APA3 ,0 ); isar2 =FIELD_DP64 (isar2,ID_AA64ISAR2 ,GPA3 ,0 ); -if (kvm_enabled () ||hvf_enabled ()) { +if (hwaccel_enabled ()) {/* * Exit early if PAuth is enabled and fall through to disable it. * The algorithm selection properties are not present.
@@ -598,10 +601,10 @@ void aarch64_add_pauth_properties(Object *obj)/* Default to PAUTH on, with the architected algorithm on TCG. */ qdev_property_add_static (DEVICE (obj), &arm_cpu_pauth_property); -if (kvm_enabled () ||hvf_enabled ()) { +if (hwaccel_enabled ()) {/* * Mirror PAuth support from the probed sysregs back into the -* property for KVM or hvf. Is it just a bit backward? Yes it is! +* property for HW accel. Is it just a bit backward? Yes it is! * Note that prop_pauth is true whether the host CPU supports the * architected QARMA5 algorithm or the IMPDEF one. We don't * provide the separate pauth-impdef property for KVM or hvf,
@@ -769,6 +772,8 @@ static void aarch64_host_initfn(Object *obj) }#elif defined(CONFIG_HVF)hvf_arm_set_cpu_features_from_host (cpu); +#elif defined(CONFIG_WHPX) +whpx_arm_set_cpu_features_from_host (cpu);#else g_assert_not_reached ();#endif
@@ -779,8 +784,8 @@ static void aarch64_host_initfn(Object *obj)static void aarch64_max_initfn (Object *obj) { -if (kvm_enabled () ||hvf_enabled ()) { -/* With KVM or HVF, '-cpu max' is identical to '-cpu host' */ +if (hwaccel_enabled ()) { +/* When hardware acceleration enabled, '-cpu max' is identical to '-cpu host' */ aarch64_host_initfn (obj);return ; }
@@ -799,7 +804,7 @@ static const ARMCPUInfo aarch64_cpus[] = { { .name = "cortex-a57", .initfn = aarch64_a57_initfn }, { .name = "cortex-a53", .initfn = aarch64_a53_initfn }, { .name = "max", .initfn = aarch64_max_initfn }, -#if defined(CONFIG_KVM) || defined(CONFIG_HVF) +#if defined(CONFIG_KVM) || defined(CONFIG_HVF) || defined(CONFIG_WHPX) { .name = "host", .initfn = aarch64_host_initfn }, #endif };
target/arm/whpx/whpx-all.c +104 -0
116 lines not on this page · raw message
target/arm/whpx_arm.h +1 -0
@@ -12,5 +12,6 @@#include "target/arm/cpu-qom.h" uint32_t whpx_arm_get_ipa_bit_size (void ); +void whpx_arm_set_cpu_features_from_host (ARMCPU *cpu);#endif
Signature · 1 line
2.50.1 (Apple Git-155)
PATCH v12 22/28 target/arm: whpx: instantiate GIC early
In reply to Mohamed MediouniWhile figuring out a better spot for it, put it in whpx_accel_init.
Needs to be done before WHvSetupPartition.
--- target/arm/whpx/whpx-all.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)
target/arm/whpx/whpx-all.c +23 -0
@@ -973,6 +973,29 @@ int whpx_accel_init(AccelState *as, MachineState *ms)memset (&prop,0 ,sizeof (WHV_PARTITION_PROPERTY )); +WHV_ARM64_IC_PARAMETERS ic_params = { + .EmulationMode = WHvArm64IcEmulationModeGicV3, + .GicV3Parameters = { + .GicdBaseAddress =0x08000000 , + .GitsTranslaterBaseAddress =0x08080000 , + .GicLpiIntIdBits =0 , + .GicPpiPerformanceMonitorsInterrupt =VIRTUAL_PMU_IRQ , + .GicPpiOverflowInterruptFromCntv =ARCH_TIMER_VIRT_IRQ + } + }; + prop.Arm64IcParameters = ic_params; + + hr = whp_dispatch.WHvSetPartitionProperty ( + whpx->partition, + WHvPartitionPropertyCodeArm64IcParameters, + &prop, +sizeof (WHV_PARTITION_PROPERTY )); +if (FAILED (hr)) { +error_report ("WHPX: Failed to enable GICv3 interrupt controller, hr=%08lx" , hr); + ret = -EINVAL ; + goto error; + } + hr = whp_dispatch.WHvSetupPartition (whpx->partition);if (FAILED (hr)) {error_report ("WHPX: Failed to setup partition, hr=%08lx" , hr);
Signature · 1 line
2.50.1 (Apple Git-155)
PATCH v12 23/28 whpx: arm64: gicv3: add migration blocker
In reply to Mohamed MediouniGICv3 state save-restore is currently not implemented yet.
--- hw/intc/arm_gicv3_whpx.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
hw/intc/arm_gicv3_whpx.c +10 -0
@@ -17,6 +17,7 @@#include "system/whpx-internal.h" #include "gicv3_internal.h" #include "vgic_common.h" +#include "migration/blocker.h" #include "qom/object.h" #include "target/arm/cpregs.h"
@@ -205,6 +206,15 @@ static void whpx_gicv3_realize(DeviceState *dev, Error **errp)error_setg (errp,"Nested virtualisation not currently supported by WHPX." );return ; } + +Error *whpx_migration_blocker =NULL ; + +error_setg (&whpx_migration_blocker, +"Live migration disabled because GIC state save/restore not supported on WHPX" ); +if (migrate_add_blocker (&whpx_migration_blocker, errp)) { +error_free (whpx_migration_blocker); +return ; + } }static void whpx_gicv3_class_init (ObjectClass *klass,const void *data)
Signature · 1 line
2.50.1 (Apple Git-155)
PATCH v12 24/28 whpx: enable arm64 builds
In reply to Mohamed Mediouni--- meson.build | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-)
meson.build +13 -7
@@ -317,7 +317,8 @@ accelerator_targets += { 'CONFIG_XEN': xen_targets } if cpu == 'aarch64' accelerator_targets += { - 'CONFIG_HVF': ['aarch64-softmmu'] + 'CONFIG_HVF': ['aarch64-softmmu'], + 'CONFIG_WHPX': ['aarch64-softmmu'] } elif cpu == 'x86_64' accelerator_targets += {
@@ -883,13 +884,18 @@ if get_option('mshv').allowed() and host_os == 'linux' endif if get_option('whpx').allowed() and host_os == 'windows' - if get_option('whpx').enabled() and host_machine.cpu() != 'x86_64' - error('WHPX requires 64-bit host') - elif cc.has_header('winhvplatform.h', required: get_option('whpx')) and \ - cc.has_header('winhvemulation.h', required: get_option('whpx')) - accelerators += 'CONFIG_WHPX' + if cpu == 'i386' + if get_option('whpx').enabled() + error('WHPX requires 64-bit host') + endif + # Leave CONFIG_WHPX disabled + else + if cc.has_header('winhvplatform.h', required: get_option('whpx')) and \ + cc.has_header('winhvemulation.h', required: get_option('whpx')) + accelerators += 'CONFIG_WHPX' + endif endif -endif + endif hvf = not_found if get_option('hvf').allowed()
Signature · 1 line
2.50.1 (Apple Git-155)
PATCH v12 25/28 whpx: apic: use non-deprecated APIs to control interrupt controller state
In reply to Mohamed MediouniWHvGetVirtualProcessorInterruptControllerState2 and WHvSetVirtualProcessorInterruptControllerState2 are deprecated since Windows 10 version 2004.
Use the non-deprecated WHvGetVirtualProcessorState and WHvSetVirtualProcessorState when available.
--- include/system/whpx-internal.h | 9 +++++++ target/i386/whpx/whpx-apic.c | 46 +++++++++++++++++++++++++--------- 2 files changed, 43 insertions(+), 12 deletions(-)
include/system/whpx-internal.h +9 -0
@@ -86,6 +86,15 @@ void whpx_apic_get(APICCommonState *s);X (HRESULT , WHvSetVirtualProcessorInterruptControllerState2, \ (WHV_PARTITION_HANDLE Partition, UINT32 VpIndex, PVOID State, \ UINT32 StateSize)) \ +X (HRESULT , WHvGetVirtualProcessorState, \ + (WHV_PARTITION_HANDLE Partition, UINT32 VpIndex, \ + WHV_VIRTUAL_PROCESSOR_STATE_TYPE StateType, PVOID Buffer, \ + UINT32 BufferSizeInBytes, UINT32 *BytesWritten)) \ +X (HRESULT , WHvSetVirtualProcessorState, \ + (WHV_PARTITION_HANDLE Partition, UINT32 VpIndex, \ + WHV_VIRTUAL_PROCESSOR_STATE_TYPE StateType, PVOID Buffer, \ + UINT32 BufferSizeInBytes)) \ +#define LIST_WINHVEMULATION_FUNCTIONS (X ) \ X(HRESULT, WHvEmulatorCreateEmulator, (const WHV_EMULATOR_CALLBACKS* Callbacks, WHV_EMULATOR_HANDLE* Emulator)) \
target/i386/whpx/whpx-apic.c +34 -12
61 lines not on this page · raw message
Signature · 1 line
2.50.1 (Apple Git-155)
PATCH v12 26/28 whpx: arm64: check for physical address width after WHPX availability
In reply to Mohamed MediouniIn the case where WHPX isn't supported on the platform, makes the intended error appear instead of failing at getting the IPA width.
--- target/arm/whpx/whpx-all.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
target/arm/whpx/whpx-all.c +9 -9
@@ -678,7 +678,7 @@ uint32_t whpx_arm_get_ipa_bit_size(void) WHvCapabilityCodePhysicalAddressWidth, &whpx_cap, sizeof(whpx_cap), &whpx_cap_size);if (FAILED (hr)) { -error_report ("WHPX: failed to get supported" +error_report ("WHPX: failed to get supported " "physical address width, hr=%08lx" , hr); }
@@ -909,14 +909,6 @@ int whpx_accel_init(AccelState *as, MachineState *ms) goto error; } -if (mc->get_physical_address_range) { - pa_range = mc->get_physical_address_range (ms, -whpx_arm_get_ipa_bit_size (),whpx_arm_get_ipa_bit_size ()); -if (pa_range <0 ) { -return -EINVAL ; - } - } - whpx->mem_quota = ms->ram_size; hr = whp_dispatch.WHvGetCapability(
@@ -943,6 +935,14 @@ int whpx_accel_init(AccelState *as, MachineState *ms) goto error; } +if (mc->get_physical_address_range) { + pa_range = mc->get_physical_address_range (ms, +whpx_arm_get_ipa_bit_size (),whpx_arm_get_ipa_bit_size ()); +if (pa_range <0 ) { +return -EINVAL ; + } + } + hr = whp_dispatch.WHvCreatePartition (&whpx->partition);if (FAILED (hr)) {error_report ("WHPX: Failed to create partition, hr=%08lx" , hr);
Signature · 1 line
2.50.1 (Apple Git-155)
Re: [PATCH v12 26/28] whpx: arm64: check for physical address width after WHPX availability
Quoted 7 lines · Mohamed Mediouni
In the case where WHPX isn't supported on the platform, makes the intended error appear instead of failing at getting the IPA width.
Signed-off-by Mohamed Mediouni <[email protected]>--- target/arm/whpx/whpx-all.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
PATCH v12 27/28 whpx: arm64: add partition-wide reset on the reboot path
In reply to Mohamed MediouniThis resets non-architectural state to allow for reboots to succeed.
--- include/system/whpx-internal.h | 2 ++ target/arm/whpx/whpx-all.c | 2 ++ 2 files changed, 4 insertions(+)
include/system/whpx-internal.h +2 -0
@@ -94,6 +94,8 @@ void whpx_apic_get(APICCommonState *s); (WHV_PARTITION_HANDLE Partition, UINT32 VpIndex, \ WHV_VIRTUAL_PROCESSOR_STATE_TYPE StateType, PVOID Buffer, \ UINT32 BufferSizeInBytes)) \ + X(HRESULT, WHvResetPartition, \ + (WHV_PARTITION_HANDLE Partition)) \#define LIST_WINHVEMULATION_FUNCTIONS (X ) \
target/arm/whpx/whpx-all.c +2 -0
@@ -497,6 +497,8 @@ int whpx_vcpu_run(CPUState *cpu)if (arm_cpu->power_state !=PSCI_OFF ) {whpx_psci_cpu_off (arm_cpu); } +/* Partition-wide reset, to reset state for reboots to succeed. */ + whp_dispatch.WHvResetPartition (whpx->partition);bql_unlock ();break ;case WHvRunVpExitReasonNone:
Signature · 1 line
2.50.1 (Apple Git-155)
Re: [PATCH v12 27/28] whpx: arm64: add partition-wide reset on the reboot path
Quoted 7 lines · Mohamed Mediouni
This resets non-architectural state to allow for reboots to succeed.
Signed-off-by Mohamed Mediouni <[email protected]>--- include/system/whpx-internal.h | 2 ++ target/arm/whpx/whpx-all.c | 2 ++ 2 files changed, 4 insertions(+)
PATCH v12 28/28 MAINTAINERS: update the list of maintained files for WHPX
In reply to Mohamed MediouniAdd arm64-specific files.
--- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+)
MAINTAINERS +2 -0
@@ -552,6 +552,8 @@ M: Mohamed Mediouni <[email protected]> S: Supported F: accel/whpx/ F: target/i386/whpx/ +F: target/arm/whpx/ +F: hw/intc/arm_gicv3_whpx.c F: accel/stubs/whpx-stub.c F: include/system/whpx.h F: include/system/whpx-accel-ops.h
Signature · 1 line
2.50.1 (Apple Git-155)
Re: [PATCH v12 28/28] MAINTAINERS: update the list of maintained files for WHPX
Quoted 6 lines · Mohamed Mediouni
Add arm64-specific files.
Signed-off-by Mohamed Mediouni <[email protected]>--- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+)
Quoted 171 lines · Mohamed Mediouni
Link to branch: https://github.com/mediouni-m/qemu whpx (tag for this submission: whpx-v12)
Missing features:
- VM save-restore: interrupt controller state notably
- SVE register sync: I didn't have the time to test this on pre-release hardware with SVE2 support yet. So SVE2 is currently masked for VMs when running this.Known bugs:
- U-Boot still doesn't work (hangs when trying to parse firmware) but EDK2 does.Note:
"target/arm/kvm: add constants for new PSCI versions" taken from the mailing list.
"accel/system: Introduce
hwaccel_enabled()helper" taken from the mailing list, added here as part of this series to make it compilable as a whole."hw/arm: virt: add GICv2m for the case when ITS is not available" present in both the HVF vGIC and this series.
"hw: arm: virt-acpi-build: add temporary hack to match existing behavior" is not proper" is for ACPI stability but what is the right approach to follow there?
And another note:
Seems that unlike HVF there isn't direct correspondence between WHv registers and the actual register layout, so didn't do changes there to a sysreg.inc.
Updates since v11:
- Address review comments
- Rebase up to latest staging
- Switch to assuming Qemu 11.0 as the newest machine modelUpdates since v10:
- Bring forward to latest Qemu
- Fix a typo in the GICv3+GICv2m PRUpdates since v9:
- Adding partition reset on the reboot side of things...Updates since v8:
- v9 and v8 were not submitted properly because of my MTA not behaving, sorry for that.
- v10 introduces a new argument, -M msi=, to handle MSI-X configuration more granularly.
- That surfaced what I think is a bug (?), with vms->its=1 on GICv2 configurations... or I did understand everything wrong.
- Oopsie due to email provider ratelimiting.Updates since v7:
- Oops, fixing bug in "hw/arm: virt: cleanly fail on attempt to use the platform vGIC together with ITS". Other commits are unchanged.Updates since v6:
- Rebasing
- Fixing a bug in the GICv3+GICv2m case for ACPI table generation
- getting rid of the slots infrastructure for memory management
- Place the docs commit right after the "cleanly fail on attempt to run GICv3+GICv2m on an unsupported config" one as that's what switches ITS to a tristate.
- Fixing a build issue when getting rid of the arch-specific arm64 hvf-stub.Updates since v5:
- Rebasing
- Address review comments
- Rework ITS enablement to a tristate
- On x86: move away from deprecated APIs to get/set APIC stateUpdates since v4:
- Taking into account review comments
- Add migration blocker in the vGICv3 code due to missing interrupt controller save/restore
- Debug register syncUpdates since v3:
- Disabling SVE on WHPX
- Taking into account review comments incl:- fixing x86 support
- reduce the amount of__x86_64__checks in common code to the minimum (winhvemulation) which can be reduced even further down the road.
- generalizeget_physical_address_rangeinto something common between hvf and whpxUpdates since v2:
- Fixed up a rebase screwup forwhpx-internal.h
- FixedID_AA64ISAR1_EL1andID_AA64ISAR2_EL1feature probe for -cpu host
- Switched to ID_AA64PFR1_EL1/ID_AA64DFR0_EL1 instead of their non-AA64 variantUpdates since v1:
- Shutdowns and reboots
-MPIDR_EL1register sync
- FixingGICD_TYPER_LPISvalue
- IPA size clamping
- -cpu host now implementedMohamed Mediouni (26):
qtest: hw/arm: virt: skip ACPI test for ITS off
hw/arm: virt: add GICv2m for the case when ITS is not available
tests: data: update AArch64 ACPI tables
hw/arm: virt: cleanly fail on attempt to use the platform vGIC
together with ITS
hw: arm: virt: rework MSI-X configuration
hw: arm: virt-acpi-build: add temporary hack to match existing
behavior
docs: arm: update virt machine model description
whpx: Move around files before introducing AArch64 support
whpx: reshuffle common code
whpx: ifdef out winhvemulation on non-x86_64
whpx: common: addWHPX_INTERCEPT_DEBUG_TRAPSdefine
hw, target, accel: whpx: changeapic_in_platformtokernel_irqchip
whpx: interrupt controller support
whpx: add arm64 support
whpx: change memory management logic
target/arm: cpu: mark WHPX as supporting PSCI 1.3
whpx: arm64: clamp down IPA size
hw/arm, accel/hvf, whpx: unifyget_physical_address_rangebetween WHPX
and HVF
whpx: arm64: implement -cpu host
target/arm: whpx: instantiate GIC early
whpx: arm64: gicv3: add migration blocker
whpx: enable arm64 builds
whpx: apic: use non-deprecated APIs to control interrupt controller
state
whpx: arm64: check for physical address width after WHPX availability
whpx: arm64: add partition-wide reset on the reboot path
MAINTAINERS: update the list of maintained files for WHPXPhilippe Mathieu-Daudé (1):
accel/system: Introducehwaccel_enabled()helperSebastian Ott (1):
target/arm/kvm: add constants for new PSCI versionsMAINTAINERS | 6 + accel/hvf/hvf-all.c | 7 +- accel/meson.build | 1 + accel/stubs/whpx-stub.c | 1 + accel/whpx/meson.build | 7 + {target/i386 => accel}/whpx/whpx-accel-ops.c | 6 +- accel/whpx/whpx-common.c | 540 +++++++++ docs/system/arm/virt.rst | 13 +- hw/arm/virt-acpi-build.c | 16 +- hw/arm/virt.c | 140 ++- hw/i386/x86-cpu.c | 4 +- hw/intc/arm_gicv3_common.c | 3 + hw/intc/arm_gicv3_whpx.c | 249 ++++ hw/intc/meson.build | 1 + include/hw/arm/virt.h | 8 +- include/hw/core/boards.h | 3 +- include/hw/intc/arm_gicv3_common.h | 3 + include/system/hvf_int.h | 5 + include/system/hw_accel.h | 13 + .../whpx => include/system}/whpx-accel-ops.h | 4 +- include/system/whpx-all.h | 20 + include/system/whpx-common.h | 26 + .../whpx => include/system}/whpx-internal.h | 25 +- include/system/whpx.h | 5 +- meson.build | 20 +- target/arm/cpu.c | 3 + target/arm/cpu64.c | 17 +- target/arm/hvf-stub.c | 20 - target/arm/hvf/hvf.c | 6 +- target/arm/hvf_arm.h | 3 - target/arm/kvm-consts.h | 2 + target/arm/meson.build | 2 +- target/arm/whpx/meson.build | 5 + target/arm/whpx/whpx-all.c | 1020 +++++++++++++++++ target/arm/whpx/whpx-stub.c | 15 + target/arm/whpx_arm.h | 17 + target/i386/cpu-apic.c | 2 +- target/i386/hvf/hvf.c | 11 + target/i386/whpx/meson.build | 1 - target/i386/whpx/whpx-all.c | 569 +-------- target/i386/whpx/whpx-apic.c | 48 +- tests/data/acpi/aarch64/virt/APIC.its_off | Bin 164 -> 188 bytes 42 files changed, 2219 insertions(+), 648 deletions(-)
Quoted 14 lines
create mode 100644 accel/whpx/meson.build
rename {target/i386 =>accel}/whpx/whpx-accel-ops.c(96%) create mode 100644accel/whpx/whpx-common.c
create mode 100644hw/intc/arm_gicv3_whpx.c
rename {target/i386/whpx =>include/system}/whpx-accel-ops.h(92%) create mode 100644include/system/whpx-all.h
create mode 100644include/system/whpx-common.h
rename {target/i386/whpx =>include/system}/whpx-internal.h(88%) delete mode 100644target/arm/hvf-stub.c
create mode 100644 target/arm/whpx/meson.build
create mode 100644target/arm/whpx/whpx-all.c
create mode 100644target/arm/whpx/whpx-stub.c
create mode 100644target/arm/whpx_arm.h
It seems like there are some build failures for mingw x86_64:
https://github.com/pbo-linaro/qemu-ci/actions/runs/20579084208/job/59103016908
../target/i386/whpx/whpx-all.c: In function 'whpx_accel_init':../target/i386/whpx/whpx-all.c:2190:19: error: 'struct whpx_state' has no member named 'kernel_irqchip'; did you mean 'kernel_irqchip_allowed'?
2190 | whpx->kernel_irqchip = true;
| ^~~~~~~~~~~~~~
| kernel_irqchip_allowedYou can cross compile for x86_64 from your windows-arm64 machine using:
https://www.qemu.org/docs/master/devel/build-environment.html#build-on-windows-aarch64
Regards,
Pierrick
Quoted 171 lines · Mohamed Mediouni
Link to branch: https://github.com/mediouni-m/qemu whpx (tag for this submission: whpx-v12)
Missing features:
- VM save-restore: interrupt controller state notably
- SVE register sync: I didn't have the time to test this on pre-release hardware with SVE2 support yet. So SVE2 is currently masked for VMs when running this.Known bugs:
- U-Boot still doesn't work (hangs when trying to parse firmware) but EDK2 does.Note:
"target/arm/kvm: add constants for new PSCI versions" taken from the mailing list.
"accel/system: Introduce
hwaccel_enabled()helper" taken from the mailing list, added here as part of this series to make it compilable as a whole."hw/arm: virt: add GICv2m for the case when ITS is not available" present in both the HVF vGIC and this series.
"hw: arm: virt-acpi-build: add temporary hack to match existing behavior" is not proper" is for ACPI stability but what is the right approach to follow there?
And another note:
Seems that unlike HVF there isn't direct correspondence between WHv registers and the actual register layout, so didn't do changes there to a sysreg.inc.
Updates since v11:
- Address review comments
- Rebase up to latest staging
- Switch to assuming Qemu 11.0 as the newest machine modelUpdates since v10:
- Bring forward to latest Qemu
- Fix a typo in the GICv3+GICv2m PRUpdates since v9:
- Adding partition reset on the reboot side of things...Updates since v8:
- v9 and v8 were not submitted properly because of my MTA not behaving, sorry for that.
- v10 introduces a new argument, -M msi=, to handle MSI-X configuration more granularly.
- That surfaced what I think is a bug (?), with vms->its=1 on GICv2 configurations... or I did understand everything wrong.
- Oopsie due to email provider ratelimiting.Updates since v7:
- Oops, fixing bug in "hw/arm: virt: cleanly fail on attempt to use the platform vGIC together with ITS". Other commits are unchanged.Updates since v6:
- Rebasing
- Fixing a bug in the GICv3+GICv2m case for ACPI table generation
- getting rid of the slots infrastructure for memory management
- Place the docs commit right after the "cleanly fail on attempt to run GICv3+GICv2m on an unsupported config" one as that's what switches ITS to a tristate.
- Fixing a build issue when getting rid of the arch-specific arm64 hvf-stub.Updates since v5:
- Rebasing
- Address review comments
- Rework ITS enablement to a tristate
- On x86: move away from deprecated APIs to get/set APIC stateUpdates since v4:
- Taking into account review comments
- Add migration blocker in the vGICv3 code due to missing interrupt controller save/restore
- Debug register syncUpdates since v3:
- Disabling SVE on WHPX
- Taking into account review comments incl:- fixing x86 support
- reduce the amount of__x86_64__checks in common code to the minimum (winhvemulation) which can be reduced even further down the road.
- generalizeget_physical_address_rangeinto something common between hvf and whpxUpdates since v2:
- Fixed up a rebase screwup forwhpx-internal.h
- FixedID_AA64ISAR1_EL1andID_AA64ISAR2_EL1feature probe for -cpu host
- Switched to ID_AA64PFR1_EL1/ID_AA64DFR0_EL1 instead of their non-AA64 variantUpdates since v1:
- Shutdowns and reboots
-MPIDR_EL1register sync
- FixingGICD_TYPER_LPISvalue
- IPA size clamping
- -cpu host now implementedMohamed Mediouni (26):
qtest: hw/arm: virt: skip ACPI test for ITS off
hw/arm: virt: add GICv2m for the case when ITS is not available
tests: data: update AArch64 ACPI tables
hw/arm: virt: cleanly fail on attempt to use the platform vGIC
together with ITS
hw: arm: virt: rework MSI-X configuration
hw: arm: virt-acpi-build: add temporary hack to match existing
behavior
docs: arm: update virt machine model description
whpx: Move around files before introducing AArch64 support
whpx: reshuffle common code
whpx: ifdef out winhvemulation on non-x86_64
whpx: common: addWHPX_INTERCEPT_DEBUG_TRAPSdefine
hw, target, accel: whpx: changeapic_in_platformtokernel_irqchip
whpx: interrupt controller support
whpx: add arm64 support
whpx: change memory management logic
target/arm: cpu: mark WHPX as supporting PSCI 1.3
whpx: arm64: clamp down IPA size
hw/arm, accel/hvf, whpx: unifyget_physical_address_rangebetween WHPX
and HVF
whpx: arm64: implement -cpu host
target/arm: whpx: instantiate GIC early
whpx: arm64: gicv3: add migration blocker
whpx: enable arm64 builds
whpx: apic: use non-deprecated APIs to control interrupt controller
state
whpx: arm64: check for physical address width after WHPX availability
whpx: arm64: add partition-wide reset on the reboot path
MAINTAINERS: update the list of maintained files for WHPXPhilippe Mathieu-Daudé (1):
accel/system: Introducehwaccel_enabled()helperSebastian Ott (1):
target/arm/kvm: add constants for new PSCI versionsMAINTAINERS | 6 + accel/hvf/hvf-all.c | 7 +- accel/meson.build | 1 + accel/stubs/whpx-stub.c | 1 + accel/whpx/meson.build | 7 + {target/i386 => accel}/whpx/whpx-accel-ops.c | 6 +- accel/whpx/whpx-common.c | 540 +++++++++ docs/system/arm/virt.rst | 13 +- hw/arm/virt-acpi-build.c | 16 +- hw/arm/virt.c | 140 ++- hw/i386/x86-cpu.c | 4 +- hw/intc/arm_gicv3_common.c | 3 + hw/intc/arm_gicv3_whpx.c | 249 ++++ hw/intc/meson.build | 1 + include/hw/arm/virt.h | 8 +- include/hw/core/boards.h | 3 +- include/hw/intc/arm_gicv3_common.h | 3 + include/system/hvf_int.h | 5 + include/system/hw_accel.h | 13 + .../whpx => include/system}/whpx-accel-ops.h | 4 +- include/system/whpx-all.h | 20 + include/system/whpx-common.h | 26 + .../whpx => include/system}/whpx-internal.h | 25 +- include/system/whpx.h | 5 +- meson.build | 20 +- target/arm/cpu.c | 3 + target/arm/cpu64.c | 17 +- target/arm/hvf-stub.c | 20 - target/arm/hvf/hvf.c | 6 +- target/arm/hvf_arm.h | 3 - target/arm/kvm-consts.h | 2 + target/arm/meson.build | 2 +- target/arm/whpx/meson.build | 5 + target/arm/whpx/whpx-all.c | 1020 +++++++++++++++++ target/arm/whpx/whpx-stub.c | 15 + target/arm/whpx_arm.h | 17 + target/i386/cpu-apic.c | 2 +- target/i386/hvf/hvf.c | 11 + target/i386/whpx/meson.build | 1 - target/i386/whpx/whpx-all.c | 569 +-------- target/i386/whpx/whpx-apic.c | 48 +- tests/data/acpi/aarch64/virt/APIC.its_off | Bin 164 -> 188 bytes 42 files changed, 2219 insertions(+), 648 deletions(-)
Quoted 14 lines
create mode 100644 accel/whpx/meson.build
rename {target/i386 =>accel}/whpx/whpx-accel-ops.c(96%) create mode 100644accel/whpx/whpx-common.c
create mode 100644hw/intc/arm_gicv3_whpx.c
rename {target/i386/whpx =>include/system}/whpx-accel-ops.h(92%) create mode 100644include/system/whpx-all.h
create mode 100644include/system/whpx-common.h
rename {target/i386/whpx =>include/system}/whpx-internal.h(88%) delete mode 100644target/arm/hvf-stub.c
create mode 100644 target/arm/whpx/meson.build
create mode 100644target/arm/whpx/whpx-all.c
create mode 100644target/arm/whpx/whpx-stub.c
create mode 100644target/arm/whpx_arm.h
Series tested by booting an accelerated linux kernel, works fine.
Regards,
Pierrick