Skip to contentSkip to conversation

: On au8820 left and right channels are swapped

ALSA - driver 0000059 [email protected] 1 participant 1 message Aug 26, 2005

lore
Share & tools
lore
#0 lore raw

A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=59>
======================================================================

Reported By:                kernel_bug
Assigned To:                mjander
======================================================================
Project:                    ALSA - driver
Issue ID:                   59
Category:                   PCI - au88x0
Reproducibility:            random
Severity:                   major
Priority:                   normal
Status:                     confirmed
Distribution:               
Kernel Version:             2.6.2
======================================================================
Date Submitted:             02-13-2004 11:40 CET
Last Modified:              08-26-2005 16:07 CEST

======================================================================
Summary: On au8820 left and right channels are swapped
Description:
In most cases, left and right channels are swapped. But in approx. 5% cases all OK. Looks like the matter is somewhere in byte alignment...
======================================================================
Relationships ID Summary
----------------------------------------------------------------------
related to 0000949 Randomly, left and right tracks are swaped
======================================================================

----------------------------------------------------------------------
kernel_bug - 08-26-05 15:12
----------------------------------------------------------------------

Quoted 2 lines

Try the speaker-test in alsa-utils
speaker-test -D hw:0,0 -c 2

Just after modprobe snd-au8820 and alsactl restore:
=================================
$./speaker-test -D hw:0,0 -c 2

speaker-test 1.0.6

Playback device is hw:0,0
Stream parameters are 48000Hz, S16_LE, 2 channels
Sine wave rate is 440.0000Hz
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 2 to 16384
Period size range from 1 to 1024
Buffer time size 2525
To choose buffer_size = 2520
To choose period_size = 315
was set period_size = 256
was set buffer_size = 2560
- Front Left
- Front Right
- Front Left
- Front Right
=================================
Channels are swapped (e.g., when speaker-test says 'Front left' I hear sound from right speaker). Mixer works correctly.

Running speaker-test again:
=================================

$ ./speaker-test -D hw:0,0 -c 2

speaker-test 1.0.6

Playback device is hw:0,0
Stream parameters are 48000Hz, S16_LE, 2 channels
Sine wave rate is 440.0000Hz
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 2 to 16384
Period size range from 1 to 1024
Buffer time size 2525
To choose buffer_size = 2520
To choose period_size = 315
was set period_size = 256
was set buffer_size = 2560
- Front Left
- Front Right
- Front Left
=================================
This time (and all consequent) all works fine.

Quoted 2 lines

Please post the output of
lspci -vvn

# lspci -vvn
00:00.0 Class 0600: 8086:2570 (rev 02)
        Subsystem: 1458:2570
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
        Latency: 0
        Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
        Capabilities: [e4] Vendor Specific Information
        Capabilities: [a0] AGP version 3.0
                Status: RQ=32 Iso- ArqSz=2 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
                Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW-
Rate=x4

00:01.0 Class 0604: 8086:2571 (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

        Latency: 64
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        I/O behind bridge: 00009000-00009fff
        Memory behind bridge: f4000000-f5ffffff
        Prefetchable memory behind bridge: f0000000-f3ffffff
        Secondary status: 66Mhz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-

<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-

00:1d.0 Class 0c03: 8086:24c2 (rev 02)
Subsystem: 1458:24c2
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 185
Region 4: I/O ports at b800 [size=32]

00:1d.1 Class 0c03: 8086:24c4 (rev 02)
Subsystem: 1458:24c2
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 193
Region 4: I/O ports at b000 [size=32]

00:1d.2 Class 0c03: 8086:24c7 (rev 02)
Subsystem: 1458:24c2
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 169
Region 4: I/O ports at b400 [size=32]

00:1d.7 Class 0c03: 8086:24cd (rev 02) (prog-if 20)
Subsystem: 1458:5006
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 177
Region 0: Memory at f6100000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1e.0 Class 0604: 8086:244e (rev 82)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR+

        Latency: 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
        I/O behind bridge: 0000a000-0000afff
        Memory behind bridge: f6000000-f60fffff
        Secondary status: 66Mhz- FastB2B+ ParErr- DEVSEL=medium >TAbort-

<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-

00:1f.0 Class 0601: 8086:24c0 (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0

00:1f.1 Class 0101: 8086:24cb (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: 1458:24c2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 169
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at f000 [size=16]
Region 5: Memory at 10000000 (32-bit, non-prefetchable) [size=1K]

00:1f.3 Class 0c05: 8086:24c3 (rev 02)
Subsystem: 1458:24c2
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 9
Region 4: I/O ports at 1400 [size=32]

00:1f.5 Class 0401: 8086:24c5 (rev 02)
Subsystem: 1458:a002
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

        Latency: 0
        Interrupt: pin B routed to IRQ 217
        Region 0: I/O ports at c000 [size=256]
        Region 1: I/O ports at c400 [size=64]
        Region 2: Memory at f6101000 (32-bit, non-prefetchable)
[size=512]
        Region 3: Memory at f6102000 (32-bit, non-prefetchable)

[size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:00.0 Class 0300: 1002:5446
Subsystem: 1002:0008
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

        Latency: 32 (2000ns min), Cache Line Size 08
        Interrupt: pin A routed to IRQ 185
        Region 0: Memory at f0000000 (32-bit, prefetchable) [size=64M]
        Region 1: I/O ports at 9000 [size=256]
        Region 2: Memory at f5000000 (32-bit, non-prefetchable)

[size=16K]
Capabilities: [50] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4

                Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW-

Rate=x4
Capabilities: [5c] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:01.0 Class 0200: 1186:1300 (rev 10)
Subsystem: 1186:1301
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

        Latency: 32 (8000ns min, 16000ns max)
        Interrupt: pin A routed to IRQ 201
        Region 0: I/O ports at a000 [size=256]
        Region 1: Memory at f6020000 (32-bit, non-prefetchable)

[size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:02.0 Class 0401: 12eb:0001 (rev 02)
Subsystem: 12eb:0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

        Latency: 32 (500ns min, 3000ns max), Cache Line Size 08
        Interrupt: pin A routed to IRQ 209
        Region 0: Memory at f6000000 (32-bit, non-prefetchable)

[size=128K]
Region 1: I/O ports at a400 [size=8] Region 2: I/O ports at a800 [size=8]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Quoted 1 line

cat /proc/asound/au8820/codec97#0/ac97#0-0+regs

Just after loading module:

$ cat /proc/asound/au8820/codec97#0/ac97#0-0+regs
0:00 = 0140
0:02 = 0000
0:04 = 0000
0:06 = 003f
0:08 = 0000
0:0a = 001e
0:0c = 001f
0:0e = 005f
0:10 = 0000
0:12 = 1f1f
0:14 = 1f1f
0:16 = 1f1f
0:18 = 1111
0:1a = 0606
0:1c = 8000
0:1e = 0000
0:20 = 0000
0:22 = 0000
0:24 = 0000
0:26 = 000f
0:28 = 0000
0:2a = 0000
0:2c = 0000
0:2e = 0000
0:30 = 0000
0:32 = 0000
0:34 = 0000
0:36 = 0000
0:38 = 0000
0:3a = 0000
0:3c = 0000
0:3e = 0000
0:40 = 0000
0:42 = 0000
0:44 = 0000
0:46 = 0000
0:48 = 0000
0:4a = 0000
0:4c = 0000
0:4e = 0000
0:50 = 0000
0:52 = 0000
0:54 = 0000
0:56 = 0000
0:58 = 0000
0:5a = 0000
0:5c = 0000
0:5e = 0000
0:60 = 0000
0:62 = 0000
0:64 = 0000
0:66 = 0000
0:68 = 0000
0:6a = 0000
0:6c = 0000
0:6e = 0000
0:70 = 0000
0:72 = 0000
0:74 = 0000
0:76 = 0000
0:78 = 0000
0:7a = 0000
0:7c = 574d
0:7e = 4c00

After running speaker-test first time:

$ cat /proc/asound/au8820/codec97#0/ac97#0-0+regs
0:00 = 0140
0:02 = 0000
0:04 = 0000
0:06 = 003f
0:08 = 0000
0:0a = 001e
0:0c = 001f
0:0e = 005f
0:10 = 0000
0:12 = 1f1f
0:14 = 1f1f
0:16 = 1f1f
0:18 = 1111
0:1a = 0606
0:1c = 8000
0:1e = 0000
0:20 = 0000
0:22 = 0000
0:24 = 0000
0:26 = 000f
0:28 = 0000
0:2a = 0000
0:2c = 0000
0:2e = 0000
0:30 = 0000
0:32 = 0000
0:34 = 0000
0:36 = 0000
0:38 = 0000
0:3a = 0000
0:3c = 0000
0:3e = 0000
0:40 = 0000
0:42 = 0000
0:44 = 0000
0:46 = 0000
0:48 = 0000
0:4a = 0000
0:4c = 0000
0:4e = 0000
0:50 = 0000
0:52 = 0000
0:54 = 0000
0:56 = 0000
0:58 = 0000
0:5a = 0000
0:5c = 0000
0:5e = 0000
0:60 = 0000
0:62 = 0000
0:64 = 0000
0:66 = 0000
0:68 = 0000
0:6a = 0000
0:6c = 0000
0:6e = 0000
0:70 = 0000
0:72 = 0000
0:74 = 0000
0:76 = 0000
0:78 = 0000
0:7a = 0000
0:7c = 574d
0:7e = 4c00

----------------------------------------------------------------------
Raymond - 08-26-05 16:07
----------------------------------------------------------------------
There is a patch for the codec init code

http://cvs.sourceforge.net/viewcvs.py/alsa/alsa-kernel/pci/au88x0/au88x0_core.c?r1=1.10&r2=1.11

Please upgrade to CVS if possible

perform speaker-test again after upgrade

alsactl store

post the content of /etc/asound.state

Issue History
Date Modified Username Field Change
======================================================================

02-13-04 11:40 kernel_bug     New Issue                                    
02-21-04 15:40 kernel_bug     Note Added: 0000280                          
03-02-04 02:56 Tim            Note Added: 0000429                          
04-09-04 11:54 kernel_bug     Note Added: 0000774                          
04-09-04 18:35 mjander        Note Added: 0000777                          
04-17-04 18:59 mjander        Status                   assigned => closed  
04-17-04 18:59 mjander        Note Added: 0000849                          
04-26-04 17:04 kernel_bug     Status                   closed => feedback  
04-26-04 17:04 kernel_bug     Resolution               open => reopened    
04-26-04 17:04 kernel_bug     Note Added: 0000953                          
04-26-04 23:27 mjander        Note Added: 0000956                          
03-10-05 15:31 jdthood        Note Added: 0003866                          
03-10-05 16:44 mjander        Note Added: 0003867                          
03-10-05 21:25 kernel_bug     Note Added: 0003873                          
03-22-05 22:33 jdthood        Relationship added       related to 0000949  
03-28-05 04:27 jdthood        Note Added: 0004235                          
03-28-05 04:27 jdthood        Status                   feedback => assigned
03-28-05 04:29 jdthood        Status                   assigned => confirmed
08-26-05 14:50 Raymond        Note Added: 0005951                          
08-26-05 15:12 kernel_bug     Note Added: 0005955                          
08-26-05 16:07 Raymond        Note Added: 0005956                          

======================================================================

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf