Skip to contentSkip to conversation

arm64: dts: ti: k3-am65: Add clocks to dwc3 nodes

PATCH Applied Roger Quadros 2 participants 2 messages Mar 11, 2020 – Mar 20, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm64: dts: ti: k3-am65: Add clocks to dwc3 nodes

From: Dave Gerlach <[email protected]>

The TI sci-clk driver can scan the DT for all clocks provided by system firmware and does this by checking the clocks property of all nodes, so we must add this to the dwc3 nodes so USB clocks are available.

Without this USB does not work with latest system firmware i.e.

[    1.714662] clk: couldn't get parent clock 0 for /interconnect@100000/dwc3@4020000
Fixes cc54a99464ccd ("arm64: dts: ti: k3-am6: add USB suppor")
---
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 2 ++
 1 file changed, 2 insertions(+)
arch/arm64/boot/dts/ti/k3-am65-main.dtsi +2 -0
index e5df20a2d2f9..d86c5c7b82fc 100644
@@ -296,6 +296,7 @@
 		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		dma-coherent;
 		power-domains = <&k3_pds 151 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 151 2>, <&k3_clks 151 7>;
 		assigned-clocks = <&k3_clks 151 2>, <&k3_clks 151 7>;
 		assigned-clock-parents = <&k3_clks 151 4>,	/* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
 					 <&k3_clks 151 9>;	/* set PIPE3_TXB_CLK to CLK_12M_RC/256 (for HS only) */
@@ -335,6 +336,7 @@
 		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
 		dma-coherent;
 		power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 152 2>;
 		assigned-clocks = <&k3_clks 152 2>;
 		assigned-clock-parents = <&k3_clks 152 4>;	/* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
 
Signature · 2 lines
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
Applied
#1 lore raw
Quoted 6 lines · Roger Quadros

From: Dave Gerlach <[email protected]>

The TI sci-clk driver can scan the DT for all clocks provided by system firmware and does this by checking the clocks property of all nodes, so we must add this to the dwc3 nodes so USB clocks are available.

Quoted 8 lines

Without this USB does not work with latest system firmware i.e.

[    1.714662] clk: couldn't get parent clock 0 for /interconnect@100000/dwc3@4020000
Fixes cc54a99464ccd ("arm64: dts: ti: k3-am6: add USB suppor")

---

Queued up towards 5.7, thanks.

-Tero

Quoted 17 lines
  arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 2 ++
  1 file changed, 2 insertions(+)
arch/arm64/boot/dts/ti/k3-am65-main.dtsi +1 -0
index e5df20a2d2f9..d86c5c7b82fc 100644
@@ -296,6 +296,7 @@
  		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
  		dma-coherent;
  		power-domains = <&k3_pds 151 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 151 2>, <&k3_clks 151 7>;
  		assigned-clocks = <&k3_clks 151 2>, <&k3_clks 151 7>;
  		assigned-clock-parents = <&k3_clks 151 4>,	/* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
  					 <&k3_clks 151 9>;	/* set PIPE3_TXB_CLK to CLK_12M_RC/256 (for HS only) */

arch/arm64/boot/dts/ti/k3-am65-main.dtsi line 342

Quoted 7 lines
arch/arm64/boot/dts/ti/k3-am65-main.dtsi +1 -0
@@ -335,6 +336,7 @@
  		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
  		dma-coherent;
  		power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 152 2>;
  		assigned-clocks = <&k3_clks 152 2>;
  		assigned-clock-parents = <&k3_clks 152 4>;	/* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
 

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel