Perf avoid opening events on offline CPUs
Subsystems (2)
cover Perf avoid opening events on offline CPUs
From: Yicong Yang <[email protected]>
If user doesn't specify the CPUs, perf will try to open events on CPUs of the PMU which is initialized from the PMU's "cpumask" or "cpus" sysfs attributes if provided. But we doesn't check whether the CPUs provided by the PMU are all online. So we may open events on offline CPUs if PMU driver provide offline CPUs and then we'll be rejected by the kernel:
[root@localhost yang]# echo 0 > /sys/devices/system/cpu/cpu0/online [root@localhost yang]# ./perf_static stat -e armv8_pmuv3_0/cycles/ --timeout 100 Error:
The sys_perf_event_open() syscall returned with 19 (No such device) for event (cpu-clock). /bin/dmesg | grep -i perf may provide additional information.
This patchset tries to avoid this case by:
- Double check the PMU's cpumask in the perf tool and only include online CPUs
- Trying to make the PMU drivers only export online CPUs in its "cpus" or "cpumask" attributes
Previously discussion can be found at [1]. Will suggested to do it in userspace. I think it makes sense to do a double check in the perf tool in case the driver doesn't do this. So PATCH 1/3 is added in this version.
[1] https://lore.kernel.org/linux-arm-kernel/[email protected]/
Yicong Yang (3):
perf pmu: Limit PMU cpumask to online CPUs
perf: arm_pmu: Only show online CPUs in device's "cpus" attribute
perf: arm_spe: Only show online CPUs in device's "cpumask" attribute
drivers/perf/arm_pmu.c | 24 +++++++++++++++++++++++- drivers/perf/arm_spe_pmu.c | 22 +++++++++++++++++++++- tools/perf/util/pmu.c | 13 +++++++++++-- 3 files changed, 55 insertions(+), 4 deletions(-)
Signature · 1 line
2.24.0
PATCH 1/3 perf pmu: Limit PMU cpumask to online CPUs
From: Yicong Yang <[email protected]>
We'll initialize the PMU's cpumask from "cpumask" or "cpus" sysfs attributes if provided by the driver without checking the CPUs are online or not. In such case that CPUs provided by the driver contains the offline CPUs, we'll try to open event on the offline CPUs and then rejected by the kernel:
[root@localhost yang]# echo 0 > /sys/devices/system/cpu/cpu0/online [root@localhost yang]# ./perf_static stat -e armv8_pmuv3_0/cycles/ --timeout 100 Error:
The sys_perf_event_open() syscall returned with 19 (No such device) for event (cpu-clock). /bin/dmesg | grep -i perf may provide additional information.
So it's better to do a double check in the userspace and only include the online CPUs from "cpumask" or "cpus" to avoid opening events on offline CPUs.
--- tools/perf/util/pmu.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)
tools/perf/util/pmu.c +11 -2
@@ -771,8 +771,17 @@ static struct perf_cpu_map *pmu_cpumask(int dirfd, const char *name, bool is_corcontinue ; cpus =perf_cpu_map__read (file);fclose (file); -if (cpus) -return cpus; +if (cpus) { +struct perf_cpu_map *intersect__maybe_unused ; + +if (perf_cpu_map__is_subset (cpu_map__online (), cpus)) +return cpus; + + intersect =perf_cpu_map__intersect (cpus,cpu_map__online ()); +perf_cpu_map__put (cpus); +if (intersect) +return intersect; + } }/* Nothing found, for core PMUs assume this means all CPUs. */
Signature · 1 line
2.24.0
Ian Rogers
reviewerRe: [PATCH 1/3] perf pmu: Limit PMU cpumask to online CPUs
Quoted 15 lines · Yicong Yang
From: Yicong Yang <[email protected]>
We'll initialize the PMU's cpumask from "cpumask" or "cpus" sysfs attributes if provided by the driver without checking the CPUs are online or not. In such case that CPUs provided by the driver contains the offline CPUs, we'll try to open event on the offline CPUs and then rejected by the kernel:
[root@localhost yang]# echo 0 >
/sys/devices/system/cpu/cpu0/online[root@localhost yang]# ./perf_static stat -e armv8_pmuv3_0/cycles/ --timeout 100 Error:
Thesys_perf_event_open()syscall returned with 19 (No such device) for event (cpu-clock)./bin/dmesg| grep -i perf may provide additional information.
Quoted 3 lines
So it's better to do a double check in the userspace and only include the online CPUs from "cpumask" or "cpus" to avoid opening events on offline CPUs.
I see where you are coming from with this but I think it is wrong. The cpus for an uncore PMU are a hint of the CPU to open on rather than the set of valid CPUs. For example:
```
$ cat /sys/devices/uncore_imc_free_running_0/cpumask
0
$ perf stat -vv -e uncore_imc_free_running_0/data_read/ -C 1 -a sleep 0.1
Using CPUID GenuineIntel-6-8D-1
Attempt to add: uncore_imc_free_running_0/data_read/
..after resolving event: uncore_imc_free_running_0/event=0xff,umask=0x20/
Control descriptor is not initialized
------------------------------------------------------------
perf_event_attr:
type 24 (uncore_imc_free_running_0)
size 136
config 0x20ff (data_read)
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8
sys_perf_event_open failed, error -22
switching off cloexec flag
------------------------------------------------------------
perf_event_attr:
type 24 (uncore_imc_free_running_0)
size 136
config 0x20ff (data_read)
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0
sys_perf_event_open failed, error -22
switching off exclude_guest, exclude_host
------------------------------------------------------------
perf_event_attr:
type 24 (uncore_imc_free_running_0)
size 136
config 0x20ff (data_read)
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0 = 3
uncore_imc_free_running_0/data_read/: 1: 4005984 102338957 102338957
uncore_imc_free_running_0/data_read/: 4005984 102338957 102338957
Performance counter stats for 'system wide':
244.51 MiB uncore_imc_free_running_0/data_read/
0.102320376 seconds time elapsed
```So the CPU mask of the PMU says to open on CPU 0, but on the command line when I passed "-C 1" it opened it on CPU 1. If the cpumask file contained an offline CPU then this change would make it so the CPU map in the tool were empty, however, a different CPU may be programmable and online.
Fwiw, the tool will determine whether the mask is for all valid or a hint by using the notion of a PMU being "core" or not. That notion considers whether the mask was loading from a "cpumask" or "cpus" file:
https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/perf/util/pmu.c?h=perf-tools-next#n810
Thanks,
Ian
Quoted 32 lines
Signed-off-by Yicong Yang <[email protected]>--- tools/perf/util/pmu.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)tools/perf/util/pmu.c +11
-3@@ -771,8 +771,17 @@ static struct perf_cpu_map *pmu_cpumask(int dirfd, const char *name, bool is_corcontinue ; cpus =perf_cpu_map__read (file);fclose (file); -if (cpus) -return cpus; +if (cpus) { +struct perf_cpu_map *intersect__maybe_unused ; + +if (perf_cpu_map__is_subset (cpu_map__online (), cpus)) +return cpus; + + intersect =perf_cpu_map__intersect (cpus,cpu_map__online ()); +perf_cpu_map__put (cpus); +if (intersect) +return intersect; + } }/* Nothing found, for core PMUs assume this means all CPUs. */ --2.24.0
Re: [PATCH 1/3] perf pmu: Limit PMU cpumask to online CPUs
Quoted 85 lines · Ian Rogers
Quoted 15 lines · Yicong Yang
From: Yicong Yang <[email protected]>
We'll initialize the PMU's cpumask from "cpumask" or "cpus" sysfs attributes if provided by the driver without checking the CPUs are online or not. In such case that CPUs provided by the driver contains the offline CPUs, we'll try to open event on the offline CPUs and then rejected by the kernel:
[root@localhost yang]# echo 0 >
/sys/devices/system/cpu/cpu0/online[root@localhost yang]# ./perf_static stat -e armv8_pmuv3_0/cycles/ --timeout 100 Error:
Thesys_perf_event_open()syscall returned with 19 (No such device) for event (cpu-clock)./bin/dmesg| grep -i perf may provide additional information.Quoted 3 lines
So it's better to do a double check in the userspace and only include the online CPUs from "cpumask" or "cpus" to avoid opening events on offline CPUs.
I see where you are coming from with this but I think it is wrong. The cpus for an uncore PMU are a hint of the CPU to open on rather than the set of valid CPUs. For example:
``` $ cat /sys/devices/uncore_imc_free_running_0/cpumask 0 $ perf stat -vv -e uncore_imc_free_running_0/data_read/ -C 1 -a sleep 0.1 Using CPUID GenuineIntel-6-8D-1 Attempt to add: uncore_imc_free_running_0/data_read/ ..after resolving event: uncore_imc_free_running_0/event=0xff,umask=0x20/ Control descriptor is not initialized ------------------------------------------------------------ perf_event_attr: type 24 (uncore_imc_free_running_0) size 136 config 0x20ff (data_read) sample_type IDENTIFIER read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING disabled 1 inherit 1 exclude_guest 1 ------------------------------------------------------------ sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8 sys_perf_event_open failed, error -22 switching off cloexec flag ------------------------------------------------------------ perf_event_attr: type 24 (uncore_imc_free_running_0) size 136 config 0x20ff (data_read) sample_type IDENTIFIER read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING disabled 1 inherit 1 exclude_guest 1 ------------------------------------------------------------ sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0 sys_perf_event_open failed, error -22 switching off exclude_guest, exclude_host ------------------------------------------------------------ perf_event_attr: type 24 (uncore_imc_free_running_0) size 136 config 0x20ff (data_read) sample_type IDENTIFIER read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING disabled 1 inherit 1 ------------------------------------------------------------ sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0 = 3 uncore_imc_free_running_0/data_read/: 1: 4005984 102338957 102338957 uncore_imc_free_running_0/data_read/: 4005984 102338957 102338957 Performance counter stats for 'system wide': 244.51 MiB uncore_imc_free_running_0/data_read/ 0.102320376 seconds time elapsed ```So the CPU mask of the PMU says to open on CPU 0, but on the command line when I passed "-C 1" it opened it on CPU 1. If the cpumask file contained an offline CPU then this change would make it so the CPU map in the tool were empty, however, a different CPU may be programmable and online.
Quoted 6 lines
Fwiw, the tool will determine whether the mask is for all valid or a hint by using the notion of a PMU being "core" or not. That notion considers whether the mask was loading from a "cpumask" or "cpus" file:
https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/perf/util/pmu.c?h=perf-tools-next#n810
I see, you're correct on this. Maybe I didn't mention it clearly in the commit, this patch doesn't intend to change the case that user specify the CPUs explicitly. It'll have difference in case user doesn't specify the CPU list while the PMU's 'cpus' or 'cpumask' contains offline CPUs: with this patch we'll use the online CPUs in the PMU's 'cpus' or 'cpumask' but before this we may use the offline CPUs. We still honor the user's input by the handling in __perf_evlist__propagate_maps().
Thanks.
Ian Rogers
reviewerRe: [PATCH 1/3] perf pmu: Limit PMU cpumask to online CPUs
Quoted 10 lines · Yicong Yang
Quoted 7 lines · Ian Rogers
On Mon, Jun 3, 2024 at 2:33 AM Yicong Yang <[email protected]> wrote:
Fwiw, the tool will determine whether the mask is for all valid or a hint by using the notion of a PMU being "core" or not. That notion considers whether the mask was loading from a "cpumask" or "cpus" file:
https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/perf/util/pmu.c?h=perf-tools-next#n810
Quoted 6 lines
I see, you're correct on this. Maybe I didn't mention it clearly in the commit, this patch doesn't intend to change the case that user specify the CPUs explicitly. It'll have difference in case user doesn't specify the CPU list while the PMU's 'cpus' or 'cpumask' contains offline CPUs: with this patch we'll use the online CPUs in the PMU's 'cpus' or 'cpumask' but before this we may use the offline CPUs. We still honor the user's input by the handling in
__perf_evlist__propagate_maps().
Thanks Yicong,
I'm having a hard time believing this bug has been there all along (forever) and also what's happening with BIG.little/hybrid that advertise CPUs in similar ways. I do see that on armv8_pmuv3_0 the "cpus" file will have offline cpus while on x86 a lack of such a file causes a fallback on using the set of online CPUs. So there is a divergence in the PMUs behavior that may well manifest itself in the perf tool like this. If the "cpus" file were empty we might fix the behavior but I don't think that's what's wanted. I also wonder that a PMU driver change will mean the perf tool is still not working correctly for people who don't rebuild their kernel.
I'm still thinking about this but thanks for the updates, Ian
Namhyung Kim
maintainerRe: [PATCH 1/3] perf pmu: Limit PMU cpumask to online CPUs
In reply to Ian RogersHello,
Quoted 79 lines · Ian Rogers
Quoted 15 lines · Yicong Yang
From: Yicong Yang <[email protected]>
We'll initialize the PMU's cpumask from "cpumask" or "cpus" sysfs attributes if provided by the driver without checking the CPUs are online or not. In such case that CPUs provided by the driver contains the offline CPUs, we'll try to open event on the offline CPUs and then rejected by the kernel:
[root@localhost yang]# echo 0 >
/sys/devices/system/cpu/cpu0/online[root@localhost yang]# ./perf_static stat -e armv8_pmuv3_0/cycles/ --timeout 100 Error:
Thesys_perf_event_open()syscall returned with 19 (No such device) for event (cpu-clock)./bin/dmesg| grep -i perf may provide additional information.Quoted 3 lines
So it's better to do a double check in the userspace and only include the online CPUs from "cpumask" or "cpus" to avoid opening events on offline CPUs.
I see where you are coming from with this but I think it is wrong. The cpus for an uncore PMU are a hint of the CPU to open on rather than the set of valid CPUs. For example:
``` $ cat /sys/devices/uncore_imc_free_running_0/cpumask 0 $ perf stat -vv -e uncore_imc_free_running_0/data_read/ -C 1 -a sleep 0.1 Using CPUID GenuineIntel-6-8D-1 Attempt to add: uncore_imc_free_running_0/data_read/ ..after resolving event: uncore_imc_free_running_0/event=0xff,umask=0x20/ Control descriptor is not initialized ------------------------------------------------------------ perf_event_attr: type 24 (uncore_imc_free_running_0) size 136 config 0x20ff (data_read) sample_type IDENTIFIER read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING disabled 1 inherit 1 exclude_guest 1 ------------------------------------------------------------ sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8 sys_perf_event_open failed, error -22 switching off cloexec flag ------------------------------------------------------------ perf_event_attr: type 24 (uncore_imc_free_running_0) size 136 config 0x20ff (data_read) sample_type IDENTIFIER read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING disabled 1 inherit 1 exclude_guest 1 ------------------------------------------------------------ sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0 sys_perf_event_open failed, error -22 switching off exclude_guest, exclude_host ------------------------------------------------------------ perf_event_attr: type 24 (uncore_imc_free_running_0) size 136 config 0x20ff (data_read) sample_type IDENTIFIER read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING disabled 1 inherit 1 ------------------------------------------------------------ sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0 = 3 uncore_imc_free_running_0/data_read/: 1: 4005984 102338957 102338957 uncore_imc_free_running_0/data_read/: 4005984 102338957 102338957 Performance counter stats for 'system wide': 244.51 MiB uncore_imc_free_running_0/data_read/ 0.102320376 seconds time elapsed ```
Quoted 5 lines
So the CPU mask of the PMU says to open on CPU 0, but on the command line when I passed "-C 1" it opened it on CPU 1. If the cpumask file contained an offline CPU then this change would make it so the CPU map in the tool were empty, however, a different CPU may be programmable and online.
I think Intel uncore PMU driver ignores the CPU parameter and set it to CPU 0 in this case internally. See uncore_pmu_event_init() at
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/x86/events/intel/uncore.c#n761
Quoted 24 lines
Fwiw, the tool will determine whether the mask is for all valid or a hint by using the notion of a PMU being "core" or not. That notion considers whether the mask was loading from a "cpumask" or "cpus" file:
https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/perf/util/pmu.c?h=perf-tools-next#n810Thanks,
IanQuoted 14 lines
Signed-off-by Yicong Yang <[email protected]>--- tools/perf/util/pmu.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)tools/perf/util/pmu.c +0
-1@@ -771,8 +771,17 @@ static struct perf_cpu_map *pmu_cpumask(int dirfd, const char *name, bool is_corcontinue ; cpus =perf_cpu_map__read (file);fclose (file); -if (cpus)
Quoted 8 lines
tools/perf/util/pmu.c static struct perf_cpu_map *pmu_cpumask(int dirfd, const char *name, bool is_cor · line 780
Quoted 8 lines
tools/perf/util/pmu.c +7
-1-return cpus; +if (cpus) { +struct perf_cpu_map *intersect__maybe_unused ; + +if (perf_cpu_map__is_subset (cpu_map__online (), cpus)) +return cpus; + + intersect =perf_cpu_map__intersect (cpus,cpu_map__online ());
So IIUC this is for core PMUs with "cpus" file, right? I guess uncore drivers already handles "cpumask" properly..
Thanks,
Namhyung
Quoted 10 lines
Quoted 10 lines
tools/perf/util/pmu.c +4
-1+perf_cpu_map__put (cpus); +if (intersect) +return intersect; + } }/* Nothing found, for core PMUs assume this means all CPUs. */ --2.24.0
Ian Rogers
reviewerRe: [PATCH 1/3] perf pmu: Limit PMU cpumask to online CPUs
Quoted 89 lines · Namhyung Kim
Hello,
Quoted 79 lines · Ian Rogers
Quoted 15 lines · Yicong Yang
From: Yicong Yang <[email protected]>
We'll initialize the PMU's cpumask from "cpumask" or "cpus" sysfs attributes if provided by the driver without checking the CPUs are online or not. In such case that CPUs provided by the driver contains the offline CPUs, we'll try to open event on the offline CPUs and then rejected by the kernel:
[root@localhost yang]# echo 0 >
/sys/devices/system/cpu/cpu0/online[root@localhost yang]# ./perf_static stat -e armv8_pmuv3_0/cycles/ --timeout 100 Error:
Thesys_perf_event_open()syscall returned with 19 (No such device) for event (cpu-clock)./bin/dmesg| grep -i perf may provide additional information.Quoted 3 lines
So it's better to do a double check in the userspace and only include the online CPUs from "cpumask" or "cpus" to avoid opening events on offline CPUs.
I see where you are coming from with this but I think it is wrong. The cpus for an uncore PMU are a hint of the CPU to open on rather than the set of valid CPUs. For example:
``` $ cat /sys/devices/uncore_imc_free_running_0/cpumask 0 $ perf stat -vv -e uncore_imc_free_running_0/data_read/ -C 1 -a sleep 0.1 Using CPUID GenuineIntel-6-8D-1 Attempt to add: uncore_imc_free_running_0/data_read/ ..after resolving event: uncore_imc_free_running_0/event=0xff,umask=0x20/ Control descriptor is not initialized ------------------------------------------------------------ perf_event_attr: type 24 (uncore_imc_free_running_0) size 136 config 0x20ff (data_read) sample_type IDENTIFIER read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING disabled 1 inherit 1 exclude_guest 1 ------------------------------------------------------------ sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8 sys_perf_event_open failed, error -22 switching off cloexec flag ------------------------------------------------------------ perf_event_attr: type 24 (uncore_imc_free_running_0) size 136 config 0x20ff (data_read) sample_type IDENTIFIER read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING disabled 1 inherit 1 exclude_guest 1 ------------------------------------------------------------ sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0 sys_perf_event_open failed, error -22 switching off exclude_guest, exclude_host ------------------------------------------------------------ perf_event_attr: type 24 (uncore_imc_free_running_0) size 136 config 0x20ff (data_read) sample_type IDENTIFIER read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING disabled 1 inherit 1 ------------------------------------------------------------ sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0 = 3 uncore_imc_free_running_0/data_read/: 1: 4005984 102338957 102338957 uncore_imc_free_running_0/data_read/: 4005984 102338957 102338957 Performance counter stats for 'system wide': 244.51 MiB uncore_imc_free_running_0/data_read/ 0.102320376 seconds time elapsed ```Quoted 5 lines
So the CPU mask of the PMU says to open on CPU 0, but on the command line when I passed "-C 1" it opened it on CPU 1. If the cpumask file contained an offline CPU then this change would make it so the CPU map in the tool were empty, however, a different CPU may be programmable and online.
Quoted 3 lines
I think Intel uncore PMU driver ignores the CPU parameter and set it to CPU 0 in this case internally. See
uncore_pmu_event_init()at
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/x86/events/intel/uncore.c#n761
Hmm.. maybe that's just the option if not set. Wrt hot plugging, on a 2 socket skylake:
``` $ cat /sys/devices/uncore_imc_0/cpumask 0,18 $ echo 0 > /sys/devices/system/cpu/cpu18/online $ cat /sys/devices/uncore_imc_0/cpumask 0,19 ```
So the cpumask should be reflecting the online/offline nature of CPUs.
Quoted 27 lines
Quoted 27 lines
Fwiw, the tool will determine whether the mask is for all valid or a hint by using the notion of a PMU being "core" or not. That notion considers whether the mask was loading from a "cpumask" or "cpus" file:
https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/perf/util/pmu.c?h=perf-tools-next#n810Thanks,
IanQuoted 17 lines
Signed-off-by Yicong Yang <[email protected]>--- tools/perf/util/pmu.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)tools/perf/util/pmu.c +2
-2@@ -771,8 +771,17 @@ static struct perf_cpu_map *pmu_cpumask(int dirfd, const char *name, bool is_corcontinue ; cpus =perf_cpu_map__read (file);fclose (file); -if (cpus) -return cpus; +if (cpus) { +struct perf_cpu_map *intersect__maybe_unused ;
Quoted 8 lines
Quoted 5 lines
tools/perf/util/pmu.c static struct perf_cpu_map *pmu_cpumask(int dirfd, const char *name, bool is_cor · line 780
Quoted 5 lines
tools/perf/util/pmu.c +5
-0+ +if (perf_cpu_map__is_subset (cpu_map__online (), cpus)) +return cpus; + + intersect =perf_cpu_map__intersect (cpus,cpu_map__online ());So IIUC this is for core PMUs with "cpus" file, right? I guess uncore drivers already handles "cpumask" properly..
So I think this is an ARM specific bug:
Core PMUs:
x86 uses /sys/devices/cpu, s390 uses cpum_cf, these lack a cpus or cpumask and so we default to opening events on all online processors. The fact these are core PMUs is hardcoded in the tool:
https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/perf/util/pmu.c?h=perf-tools-next#n1747
x86 hybrid /sys/devices/cpu_(core|atom)/cpus - the set of CPUs is updated to reflect online and offline
ARM the /sys/devices/armv8_pmuv3_0 isn't a hardcoded core PMU and so we expect the cpus to contain online CPUs, but it currently also erroneously contains offline ones.
Uncore PMUs:
x86 has /sys/devices/<uncore...>/cpumask where the cpumask reflects online and offline CPUs
ARM has things like the dmc620 PMU, it appears to be missing cpumask in certain cases leading to the perf tool treating it like the x86 core PMU and opening events for it on every CPU:
``` # ls /sys/devices/arm_dmc620_10008c000/ events format perf_event_mux_interval_ms power subsystem type uevent ```
I think we need a PMU test so that bugs like this can be reported, but we may also need to add tool workarounds for PMUs that are broken. I can imagine it will be tricky to test uncore PMUs that default to CPU0 as often we can't offline that.
Thanks,
Ian
Quoted 14 lines
Thanks,
NamhyungQuoted 10 lines
Quoted 10 lines
tools/perf/util/pmu.c +4
-1+perf_cpu_map__put (cpus); +if (intersect) +return intersect; + } }/* Nothing found, for core PMUs assume this means all CPUs. */ --2.24.0
Ian Rogers
reviewerRe: [PATCH 1/3] perf pmu: Limit PMU cpumask to online CPUs
Quoted 166 lines · Ian Rogers
Quoted 89 lines · Namhyung Kim
Hello,
Quoted 79 lines · Ian Rogers
Quoted 15 lines · Yicong Yang
From: Yicong Yang <[email protected]>
We'll initialize the PMU's cpumask from "cpumask" or "cpus" sysfs attributes if provided by the driver without checking the CPUs are online or not. In such case that CPUs provided by the driver contains the offline CPUs, we'll try to open event on the offline CPUs and then rejected by the kernel:
[root@localhost yang]# echo 0 >
/sys/devices/system/cpu/cpu0/online[root@localhost yang]# ./perf_static stat -e armv8_pmuv3_0/cycles/ --timeout 100 Error:
Thesys_perf_event_open()syscall returned with 19 (No such device) for event (cpu-clock)./bin/dmesg| grep -i perf may provide additional information.Quoted 3 lines
So it's better to do a double check in the userspace and only include the online CPUs from "cpumask" or "cpus" to avoid opening events on offline CPUs.
I see where you are coming from with this but I think it is wrong. The cpus for an uncore PMU are a hint of the CPU to open on rather than the set of valid CPUs. For example:
``` $ cat /sys/devices/uncore_imc_free_running_0/cpumask 0 $ perf stat -vv -e uncore_imc_free_running_0/data_read/ -C 1 -a sleep 0.1 Using CPUID GenuineIntel-6-8D-1 Attempt to add: uncore_imc_free_running_0/data_read/ ..after resolving event: uncore_imc_free_running_0/event=0xff,umask=0x20/ Control descriptor is not initialized ------------------------------------------------------------ perf_event_attr: type 24 (uncore_imc_free_running_0) size 136 config 0x20ff (data_read) sample_type IDENTIFIER read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING disabled 1 inherit 1 exclude_guest 1 ------------------------------------------------------------ sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8 sys_perf_event_open failed, error -22 switching off cloexec flag ------------------------------------------------------------ perf_event_attr: type 24 (uncore_imc_free_running_0) size 136 config 0x20ff (data_read) sample_type IDENTIFIER read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING disabled 1 inherit 1 exclude_guest 1 ------------------------------------------------------------ sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0 sys_perf_event_open failed, error -22 switching off exclude_guest, exclude_host ------------------------------------------------------------ perf_event_attr: type 24 (uncore_imc_free_running_0) size 136 config 0x20ff (data_read) sample_type IDENTIFIER read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING disabled 1 inherit 1 ------------------------------------------------------------ sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0 = 3 uncore_imc_free_running_0/data_read/: 1: 4005984 102338957 102338957 uncore_imc_free_running_0/data_read/: 4005984 102338957 102338957 Performance counter stats for 'system wide': 244.51 MiB uncore_imc_free_running_0/data_read/ 0.102320376 seconds time elapsed ```Quoted 5 lines
So the CPU mask of the PMU says to open on CPU 0, but on the command line when I passed "-C 1" it opened it on CPU 1. If the cpumask file contained an offline CPU then this change would make it so the CPU map in the tool were empty, however, a different CPU may be programmable and online.
Quoted 3 lines
I think Intel uncore PMU driver ignores the CPU parameter and set it to CPU 0 in this case internally. See
uncore_pmu_event_init()at
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/x86/events/intel/uncore.c#n761Hmm.. maybe that's just the option if not set. Wrt hot plugging, on a 2 socket skylake:
``` $ cat /sys/devices/uncore_imc_0/cpumask 0,18 $ echo 0 > /sys/devices/system/cpu/cpu18/online $ cat /sys/devices/uncore_imc_0/cpumask 0,19 ```So the cpumask should be reflecting the online/offline nature of CPUs.
Quoted 27 lines
Quoted 27 lines
Fwiw, the tool will determine whether the mask is for all valid or a hint by using the notion of a PMU being "core" or not. That notion considers whether the mask was loading from a "cpumask" or "cpus" file:
https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/perf/util/pmu.c?h=perf-tools-next#n810Thanks,
IanQuoted 17 lines
Signed-off-by Yicong Yang <[email protected]>--- tools/perf/util/pmu.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)tools/perf/util/pmu.c +2
-2@@ -771,8 +771,17 @@ static struct perf_cpu_map *pmu_cpumask(int dirfd, const char *name, bool is_corcontinue ; cpus =perf_cpu_map__read (file);fclose (file); -if (cpus) -return cpus; +if (cpus) { +struct perf_cpu_map *intersect__maybe_unused ;Quoted 8 lines
Quoted 5 lines
tools/perf/util/pmu.c static struct perf_cpu_map *pmu_cpumask(int dirfd, const char *name, bool is_cor · line 780
Quoted 5 lines
tools/perf/util/pmu.c +5
-0+ +if (perf_cpu_map__is_subset (cpu_map__online (), cpus)) +return cpus; + + intersect =perf_cpu_map__intersect (cpus,cpu_map__online ());So IIUC this is for core PMUs with "cpus" file, right? I guess uncore drivers already handles "cpumask" properly..
So I think this is an ARM specific bug:
Core PMUs:
x86 uses/sys/devices/cpu, s390 usescpum_cf, these lack a cpus or cpumask and so we default to opening events on all online processors. The fact these are core PMUs is hardcoded in the tool:
https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/perf/util/pmu.c?h=perf-tools-next#n1747
x86 hybrid /sys/devices/cpu_(core|atom)/cpus - the set of CPUs is updated to reflect online and offline
ARM the/sys/devices/armv8_pmuv3_0isn't a hardcoded core PMU and so we expect the cpus to contain online CPUs, but it currently also erroneously contains offline ones.Uncore PMUs:
x86 has /sys/devices/<uncore...>/cpumask where the cpumask reflects online and offline CPUs
ARM has things like the dmc620 PMU, it appears to be missing cpumask in certain cases leading to the perf tool treating it like the x86 core PMU and opening events for it on every CPU:``` # ls /sys/devices/arm_dmc620_10008c000/ events format perf_event_mux_interval_ms power subsystem type uevent ```
Quoted 4 lines
I think we need a PMU test so that bugs like this can be reported, but we may also need to add tool workarounds for PMUs that are broken. I can imagine it will be tricky to test uncore PMUs that default to CPU0 as often we can't offline that.
I think we should make this an ARM specific fix up like:
https://lore.kernel.org/lkml/[email protected]/
The PMU needs fixing up like in the rest of the change, but as perf can be run on older kernels I think this workaround will remain necessary. The arm_cmn PMU appears to handle CPU hot plugging, the arm_dmc620 lacks a cpumask altogether on the test machine I can access. I suspect we may want a better uncore fix as we may change a CPU map of 1 CPU into an empty CPU map, for example, if the cpumask is "0" and CPU0 is offline, then "1" would be a better alternative than the empty CPU map. I couldn't find a PMU to test this with.
Thanks,
Ian
Quoted 17 lines
Thanks,
IanQuoted 14 lines
Thanks,
NamhyungQuoted 10 lines
Quoted 10 lines
tools/perf/util/pmu.c +4
-1+perf_cpu_map__put (cpus); +if (intersect) +return intersect; + } }/* Nothing found, for core PMUs assume this means all CPUs. */ --2.24.0
PATCH 2/3 perf: arm_pmu: Only show online CPUs in device's "cpus" attribute
In reply to Yicong YangFrom: Yicong Yang <[email protected]>
When there're CPUs offline after system booting, perf will failed:
[root@localhost ~]# /home/yang/perf stat -a -e armv8_pmuv3_0/cycles/
Error:
The sys_perf_event_open() syscall returned with 19 (No such device) for event (cpu-clock). /bin/dmesg | grep -i perf may provide additional information.
This is due to PMU's "cpus" is not updated and still contains offline CPUs and perf will try to open perf event on the offlined CPUs.
Make "cpus" attribute only shows online CPUs and introduced a new "supported_cpus" where users can get the range of the CPUs this PMU supported monitoring.
--- drivers/perf/arm_pmu.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-)
drivers/perf/arm_pmu.c +23 -1
@@ -558,13 +558,35 @@ static ssize_t cpus_show(struct device *dev, struct device_attribute *attr, char *buf) { struct arm_pmu *armpmu = to_arm_pmu(dev_get_drvdata(dev)); -return cpumap_print_to_pagebuf (true, buf, &armpmu->supported_cpus); +cpumask_var_t mask; +ssize_t n; + +/* If allocation failed then show the supported_cpus */ +if (!alloc_cpumask_var (&mask,GFP_KERNEL )) +return cpumap_print_to_pagebuf (true, buf, &armpmu->supported_cpus); + +cpumask_and (mask, &armpmu->supported_cpus, cpu_online_mask); + n =cpumap_print_to_pagebuf (true, buf, mask); +free_cpumask_var (mask); + +return n; }static DEVICE_ATTR_RO (cpus); +static ssize_t supported_cpus_show (struct device *dev, +struct device_attribute *attr,char *buf) +{ +struct arm_pmu *armpmu =to_arm_pmu (dev_get_drvdata (dev)); + +return cpumap_print_to_pagebuf (true, buf, &armpmu->supported_cpus); +} + +static DEVICE_ATTR_RO (supported_cpus); +static struct attribute *armpmu_common_attrs[] = { &dev_attr_cpus.attr, + &dev_attr_supported_cpus.attr,NULL , };
Signature · 1 line
2.24.0
Ian Rogers
reviewerRe: [PATCH 2/3] perf: arm_pmu: Only show online CPUs in device's "cpus" attribute
Quoted 8 lines · Yicong Yang
From: Yicong Yang <[email protected]>
When there're CPUs offline after system booting, perf will failed:
[root@localhost ~]#/home/yang/perfstat -a -e armv8_pmuv3_0/cycles/
Error:
Thesys_perf_event_open()syscall returned with 19 (No such device) for event (cpu-clock)./bin/dmesg| grep -i perf may provide additional information.
Thanks for debugging this Yicong! The fact cycles is falling back on cpu-clock I'm confused by, on ARM the PMU type generally isn't PERF_TYPE_HARDWARE and so this fallback shouldn't happen:
https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/perf/util/evsel.c?h=perf-tools-next#n2900
I note your command line is for system wide event opening rather than for a process. It is more strange the fallback is giving "No such device".
Quoted 2 lines
This is due to PMU's "cpus" is not updated and still contains offline CPUs and perf will try to open perf event on the offlined CPUs.
The perf tool will try to only open online CPUs. Unfortunately the naming around this is confusing:
- any - an event may follow a task and schedule on "any" CPU. We encode this with -1.
https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/lib/perf/include/perf/cpumap.h?h=perf-tools-next#n24
- online - the set of online CPU.
https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/lib/perf/include/perf/cpumap.h?h=perf-tools-next#n33
- all - I try to avoid this but it may still be in the code, "all" usually is another name for online. Hopefully when we use this name it is clearly defined:
https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/lib/perf/include/internal/evlist.h?h=perf-tools-next#n23
Quoted 3 lines
Make "cpus" attribute only shows online CPUs and introduced a new "
supported_cpus" where users can get the range of the CPUs this PMU supported monitoring.
I don't think this should be necessary as by default the CPUs the perf tool will use will be the "online" CPUs:
https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/lib/perf/evlist.c?h=perf-tools-next#n40
Could you create a reproduction of the problem you are encountering? My expectation is for a core PMU to advertise the online and offline CPUs it is valid for, and for perf to intersect:
https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/lib/perf/include/perf/cpumap.h?h=perf-tools-next#n44
those CPUs with the online CPUs so the perf_event_open doesn't fail.
Thanks,
Ian
Quoted 49 lines
Signed-off-by Yicong Yang <[email protected]>--- drivers/perf/arm_pmu.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-)drivers/perf/arm_pmu.c +23
-2@@ -558,13 +558,35 @@ static ssize_t cpus_show(struct device *dev, struct device_attribute *attr, char *buf) { struct arm_pmu *armpmu = to_arm_pmu(dev_get_drvdata(dev)); -return cpumap_print_to_pagebuf (true, buf, &armpmu->supported_cpus); +cpumask_var_t mask; +ssize_t n; + +/* If allocation failed then show the supported_cpus */ +if (!alloc_cpumask_var (&mask,GFP_KERNEL )) +return cpumap_print_to_pagebuf (true, buf, &armpmu->supported_cpus); + +cpumask_and (mask, &armpmu->supported_cpus, cpu_online_mask); + n =cpumap_print_to_pagebuf (true, buf, mask); +free_cpumask_var (mask); + +return n; }static DEVICE_ATTR_RO (cpus); +static ssize_t supported_cpus_show (struct device *dev, +struct device_attribute *attr,char *buf) +{ +struct arm_pmu *armpmu =to_arm_pmu (dev_get_drvdata (dev)); + +return cpumap_print_to_pagebuf (true, buf, &armpmu->supported_cpus); +} + +static DEVICE_ATTR_RO (supported_cpus); +static struct attribute *armpmu_common_attrs[] = { &dev_attr_cpus.attr, + &dev_attr_supported_cpus.attr,NULL , }; --2.24.0
Re: [PATCH 2/3] perf: arm_pmu: Only show online CPUs in device's "cpus" attribute
Hi Ian,
Quoted 42 lines · Ian Rogers
Quoted 8 lines · Yicong Yang
From: Yicong Yang <[email protected]>
When there're CPUs offline after system booting, perf will failed:
[root@localhost ~]#/home/yang/perfstat -a -e armv8_pmuv3_0/cycles/
Error:
Thesys_perf_event_open()syscall returned with 19 (No such device) for event (cpu-clock)./bin/dmesg| grep -i perf may provide additional information.Thanks for debugging this Yicong! The fact cycles is falling back on cpu-clock I'm confused by, on ARM the PMU type generally isn't
PERF_TYPE_HARDWAREand so this fallback shouldn't happen:
https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/perf/util/evsel.c?h=perf-tools-next#n2900
I note your command line is for system wide event opening rather than for a process. It is more strange the fallback is giving "No such device".Quoted 2 lines
This is due to PMU's "cpus" is not updated and still contains offline CPUs and perf will try to open perf event on the offlined CPUs.
The perf tool will try to only open online CPUs. Unfortunately the naming around this is confusing:
- any - an event may follow a task and schedule on "any" CPU. We encode this with -1.
https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/lib/perf/include/perf/cpumap.h?h=perf-tools-next#n24
- online - the set of online CPU.
https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/lib/perf/include/perf/cpumap.h?h=perf-tools-next#n33
- all - I try to avoid this but it may still be in the code, "all" usually is another name for online. Hopefully when we use this name it is clearly defined:
https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/lib/perf/include/internal/evlist.h?h=perf-tools-next#n23Quoted 3 lines
Make "cpus" attribute only shows online CPUs and introduced a new "
supported_cpus" where users can get the range of the CPUs this PMU supported monitoring.I don't think this should be necessary as by default the CPUs the perf tool will use will be the "online" CPUs:
https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/lib/perf/evlist.c?h=perf-tools-next#n40
Quoted 6 lines
Could you create a reproduction of the problem you are encountering? My expectation is for a core PMU to advertise the online and offline CPUs it is valid for, and for perf to intersect:
https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/lib/perf/include/perf/cpumap.h?h=perf-tools-next#n44
those CPUs with the online CPUs so theperf_event_opendoesn't fail.
Thanks for the comments and detailed illustration!
Actually it can be reproduced easily using the armv8_pmuv3's events. Tested on 6.10-rc1 with perf version 6.10.rc1.g1613e604df0c:
# offline any CPU [root@localhost tmp]# echo 0 > /sys//devices/system/cpu/cpu1/online # try any event of armv8_pmuv3, with -a or without [root@localhost tmp]# ./perf stat -e armv8_pmuv3_0/ll_cache/ -vvv Control descriptor is not initialized Opening: armv8_pmuv3_0/ll_cache/ ------------------------------------------------------------ perf_event_attr: type 10 (armv8_pmuv3_0) size 136 config 0x32 (ll_cache) sample_type IDENTIFIER read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING disabled 1 inherit 1 exclude_guest 1 ------------------------------------------------------------ sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 3 Opening: armv8_pmuv3_0/ll_cache/ ------------------------------------------------------------ perf_event_attr: type 10 (armv8_pmuv3_0) size 136 config 0x32 (ll_cache) sample_type IDENTIFIER read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING disabled 1 inherit 1 exclude_guest 1 ------------------------------------------------------------ sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8 sys_perf_event_open failed, error -19 Error: The sys_perf_event_open() syscall returned with 19 (No such device) for event (armv8_pmuv3_0/ll_cache/). /bin/dmesg | grep -i perf may provide additional information.
As you can see, we're trying to open event on CPU 0 first (succeed) and then CPU 1 but failed on CPU1. Actually we don't enter any branch which handle the evsel->cpus in __perf_evlist__propagate_maps() so the evsel->cpus keeps as is which should be initialized from the pmu->cpumask. You referenced to [1] but in this case perf_evsel->system_wide == false as I checked. perf_evsel->system_wide will set to true in perf_evlist__go_system_wide() and it maybe only set for dummy events. Please correct me if I misread here.
Thanks.
Namhyung Kim
maintainerRe: [PATCH 2/3] perf: arm_pmu: Only show online CPUs in device's "cpus" attribute
Quoted 92 lines · Yicong Yang
Hi Ian,
Quoted 42 lines · Ian Rogers
Quoted 8 lines · Yicong Yang
From: Yicong Yang <[email protected]>
When there're CPUs offline after system booting, perf will failed:
[root@localhost ~]#/home/yang/perfstat -a -e armv8_pmuv3_0/cycles/
Error:
Thesys_perf_event_open()syscall returned with 19 (No such device) for event (cpu-clock)./bin/dmesg| grep -i perf may provide additional information.Thanks for debugging this Yicong! The fact cycles is falling back on cpu-clock I'm confused by, on ARM the PMU type generally isn't
PERF_TYPE_HARDWAREand so this fallback shouldn't happen:
https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/perf/util/evsel.c?h=perf-tools-next#n2900
I note your command line is for system wide event opening rather than for a process. It is more strange the fallback is giving "No such device".Quoted 2 lines
This is due to PMU's "cpus" is not updated and still contains offline CPUs and perf will try to open perf event on the offlined CPUs.
The perf tool will try to only open online CPUs. Unfortunately the naming around this is confusing:
- any - an event may follow a task and schedule on "any" CPU. We encode this with -1.
https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/lib/perf/include/perf/cpumap.h?h=perf-tools-next#n24
- online - the set of online CPU.
https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/lib/perf/include/perf/cpumap.h?h=perf-tools-next#n33
- all - I try to avoid this but it may still be in the code, "all" usually is another name for online. Hopefully when we use this name it is clearly defined:
https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/lib/perf/include/internal/evlist.h?h=perf-tools-next#n23Quoted 3 lines
Make "cpus" attribute only shows online CPUs and introduced a new "
supported_cpus" where users can get the range of the CPUs this PMU supported monitoring.I don't think this should be necessary as by default the CPUs the perf tool will use will be the "online" CPUs:
https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/lib/perf/evlist.c?h=perf-tools-next#n40Quoted 6 lines
Could you create a reproduction of the problem you are encountering? My expectation is for a core PMU to advertise the online and offline CPUs it is valid for, and for perf to intersect:
https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/lib/perf/include/perf/cpumap.h?h=perf-tools-next#n44
those CPUs with the online CPUs so theperf_event_opendoesn't fail.Thanks for the comments and detailed illustration!
Actually it can be reproduced easily using the armv8_pmuv3's events. Tested on 6.10-rc1 with perf version 6.10.rc1.g1613e604df0c:
# offline any CPU [root@localhost tmp]# echo 0 > /sys//devices/system/cpu/cpu1/online # try any event of armv8_pmuv3, with -a or without [root@localhost tmp]# ./perf stat -e armv8_pmuv3_0/ll_cache/ -vvv Control descriptor is not initialized Opening: armv8_pmuv3_0/ll_cache/ ------------------------------------------------------------ perf_event_attr: type 10 (armv8_pmuv3_0) size 136 config 0x32 (ll_cache) sample_type IDENTIFIER read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING disabled 1 inherit 1 exclude_guest 1 ------------------------------------------------------------ sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 3 Opening: armv8_pmuv3_0/ll_cache/ ------------------------------------------------------------ perf_event_attr: type 10 (armv8_pmuv3_0) size 136 config 0x32 (ll_cache) sample_type IDENTIFIER read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING disabled 1 inherit 1 exclude_guest 1 ------------------------------------------------------------ sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8 sys_perf_event_open failed, error -19 Error: The sys_perf_event_open() syscall returned with 19 (No such device) for event (armv8_pmuv3_0/ll_cache/). /bin/dmesg | grep -i perf may provide additional information.
Quoted 6 lines
As you can see, we're trying to open event on CPU 0 first (succeed) and then CPU 1 but failed on CPU1. Actually we don't enter any branch which handle the
evsel->cpusin__perf_evlist__propagate_maps()so theevsel->cpuskeeps as is which should be initialized from thepmu->cpumask. You referenced to [1] but in this caseperf_evsel->system_wide== false as I checked.perf_evsel->system_widewill set to true inperf_evlist__go_system_wide()and it maybe only set for dummy events. Please correct me if I misread here.
Yes, this is confusing. IIRC evsel->system_wide is for tracking (dummy) events to collect side band events (like for Intel-PT) regardless of command line options (like -a or -C).
Thanks,
Namhyung
Re: [PATCH 2/3] perf: arm_pmu: Only show online CPUs in device's "cpus" attribute
In reply to Ian RogersQuoted 10 lines · Ian Rogers
Quoted 8 lines · Yicong Yang
From: Yicong Yang <[email protected]>
When there're CPUs offline after system booting, perf will failed:
[root@localhost ~]#/home/yang/perfstat -a -e armv8_pmuv3_0/cycles/
Error:
Thesys_perf_event_open()syscall returned with 19 (No such device) for event (cpu-clock)./bin/dmesg| grep -i perf may provide additional information.
Quoted 4 lines
Thanks for debugging this Yicong! The fact cycles is falling back on cpu-clock I'm confused by, on ARM the PMU type generally isn't
PERF_TYPE_HARDWAREand so this fallback shouldn't happen:
https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/perf/util/evsel.c?h=perf-tools-next#n2900
It should be brought by config_term_pmu() in [1]. If it's a hardware event term and not found in the PMU's sysfs, we'll make attr->type to PERF_TYPE_HARDWARE.
Thanks.
PATCH 3/3 perf: arm_spe: Only show online CPUs in device's "cpumask" attribute
In reply to Yicong YangFrom: Yicong Yang <[email protected]>
When there're CPUs offline after system booting, perf will failed:
[root@localhost ~]# /home/yang/perf record -e arm_spe_0//
Error:
The sys_perf_event_open() syscall returned with 19 (No such device) for event (arm_spe_0//). /bin/dmesg | grep -i perf may provide additional information.
This is due to PMU's "cpumask" is not updated and still contains offline CPUs and perf will try to open perf event on the offlined CPUs.
Make "cpumask" attribute only shows online CPUs and introduced a new "supported_cpus" where users can get the range of the CPUs this PMU supported monitoring.
--- drivers/perf/arm_spe_pmu.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-)
drivers/perf/arm_spe_pmu.c +21 -1
@@ -254,13 +254,33 @@ static ssize_t cpumask_show(struct device *dev, struct device_attribute *attr, char *buf) { struct arm_spe_pmu *spe_pmu = dev_get_drvdata(dev); +cpumask_var_t mask; +ssize_t n; -return cpumap_print_to_pagebuf (true, buf, &spe_pmu->supported_cpus); +/* If allocation failed then show the supported_cpus */ +if (!alloc_cpumask_var (&mask,GFP_KERNEL )) +return cpumap_print_to_pagebuf (true, buf, &spe_pmu->supported_cpus); + +cpumask_and (mask, &spe_pmu->supported_cpus, cpu_online_mask); + n =cpumap_print_to_pagebuf (true, buf, mask); +free_cpumask_var (mask); + +return n; }static DEVICE_ATTR_RO (cpumask); +static ssize_t supported_cpus_show (struct device *dev, +struct device_attribute *attr,char *buf) +{ +struct arm_spe_pmu *spe_pmu =dev_get_drvdata (dev); + +return cpumap_print_to_pagebuf (true, buf, &spe_pmu->supported_cpus); +} +static DEVICE_ATTR_RO (supported_cpus); +static struct attribute *arm_spe_pmu_attrs[] = { &dev_attr_cpumask.attr, + &dev_attr_supported_cpus.attr,NULL , };
Signature · 1 line
2.24.0
Ian Rogers
reviewerQuoted 10 lines · Yicong Yang
From: Yicong Yang <[email protected]>
If user doesn't specify the CPUs, perf will try to open events on CPUs of the PMU which is initialized from the PMU's "cpumask" or "cpus" sysfs attributes if provided. But we doesn't check whether the CPUs provided by the PMU are all online. So we may open events on offline CPUs if PMU driver provide offline CPUs and then we'll be rejected by the kernel:
[root@localhost yang]# echo 0 >
/sys/devices/system/cpu/cpu0/online
Generally Linux won't let you take CPU0 off line, I'm not able to follow this step on x86 Linux. Fwiw, I routinely run perf with the core hyperthread siblings offline.
Thanks,
Ian
Quoted 29 lines
[root@localhost yang]# ./perf_static stat -e armv8_pmuv3_0/cycles/ --timeout 100 Error:
Thesys_perf_event_open()syscall returned with 19 (No such device) for event (cpu-clock)./bin/dmesg| grep -i perf may provide additional information.This patchset tries to avoid this case by:
- Double check the PMU's cpumask in the perf tool and only include online CPUs
- Trying to make the PMU drivers only export online CPUs in its "cpus" or "cpumask" attributesPreviously discussion can be found at [1]. Will suggested to do it in userspace. I think it makes sense to do a double check in the perf tool in case the driver doesn't do this. So PATCH 1/3 is added in this version.
[1] https://lore.kernel.org/linux-arm-kernel/[email protected]/
Yicong Yang (3):
perf pmu: Limit PMU cpumask to online CPUs
perf:arm_pmu: Only show online CPUs in device's "cpus" attribute
perf:arm_spe: Only show online CPUs in device's "cpumask" attributedrivers/perf/arm_pmu.c | 24 +++++++++++++++++++++++- drivers/perf/arm_spe_pmu.c | 22 +++++++++++++++++++++- tools/perf/util/pmu.c | 13 +++++++++++-- 3 files changed, 55 insertions(+), 4 deletions(-)--
2.24.0
Quoted 10 lines · Ian Rogers
Quoted 9 lines · Yicong Yang
From: Yicong Yang <[email protected]>
If user doesn't specify the CPUs, perf will try to open events on CPUs of the PMU which is initialized from the PMU's "cpumask" or "cpus" sysfs attributes if provided. But we doesn't check whether the CPUs provided by the PMU are all online. So we may open events on offline CPUs if PMU driver provide offline CPUs and then we'll be rejected by the kernel:
Quoted 6 lines
Quoted 1 line
[root@localhost yang]# echo 0 >
/sys/devices/system/cpu/cpu0/onlineGenerally Linux won't let you take CPU0 off line, I'm not able to follow this step on x86 Linux. Fwiw, I routinely run perf with the core hyperthread siblings offline.
It doesn't matter if it's the CPU0 offline or other CPUs. There's no restriction for CPU0 can go offline or not on arm64 and I just use this for example.
I cannot reproduce it on x86. I think it may because we're initializing the pmu->cpus in different routines in pmu_cpumask(). There's no "cpus" for x86's core pmu on my x86 machine:
root@ubuntu204:~# ls /sys/bus/event_source/devices/cpu/ allow_tsx_force_abort caps events format freeze_on_smi perf_event_mux_interval_ms power rdpmc subsystem type uevent
So pmu_cpumask() will infer it as an core pmu and initialize the cpus with online CPUs [1]. For arm64 there lies a "cpus" sysfs attributes so pmu->cpus are initialized from the "cpus" without checking each CPUs is online or not. That's what proposed in Patch 1/3.
There's a "cpus" sysfs for x86's hybrid machine, reading from the code [2]. And it seems always reflect the online CPUs supported by that PMU.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree/tools/perf/util/pmu.c?h=perf-tools-next#n779
[2] https://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next.git/tree//arch/x86/events/intel/core.c#n5736
Thanks.
Ian Rogers
reviewerQuoted 28 lines · Yicong Yang
Quoted 10 lines · Ian Rogers
Quoted 9 lines · Yicong Yang
From: Yicong Yang <[email protected]>
If user doesn't specify the CPUs, perf will try to open events on CPUs of the PMU which is initialized from the PMU's "cpumask" or "cpus" sysfs attributes if provided. But we doesn't check whether the CPUs provided by the PMU are all online. So we may open events on offline CPUs if PMU driver provide offline CPUs and then we'll be rejected by the kernel:
Quoted 6 lines
Quoted 1 line
[root@localhost yang]# echo 0 >
/sys/devices/system/cpu/cpu0/onlineGenerally Linux won't let you take CPU0 off line, I'm not able to follow this step on x86 Linux. Fwiw, I routinely run perf with the core hyperthread siblings offline.
It doesn't matter if it's the CPU0 offline or other CPUs. There's no restriction for CPU0 can go offline or not on arm64 and I just use this for example.
I cannot reproduce it on x86. I think it may because we're initializing the
pmu->cpusin different routines inpmu_cpumask(). There's no "cpus" for x86's core pmu on my x86 machine:root@ubuntu204:~# ls /sys/bus/event_source/devices/cpu/ allow_tsx_force_abort caps events format freeze_on_smi perf_event_mux_interval_ms power rdpmc subsystem type uevent
Quoted 7 lines
So
pmu_cpumask()will infer it as an core pmu and initialize the cpus with online CPUs [1]. For arm64 there lies a "cpus" sysfs attributes sopmu->cpusare initialized from the "cpus" without checking each CPUs is online or not. That's what proposed in Patch 1/3.There's a "cpus" sysfs for x86's hybrid machine, reading from the code [2]. And it seems always reflect the online CPUs supported by that PMU.
Thanks Yicong, looking on a hybrid machine and taking cpu1 offline I see the PMU's "cpus" not containing the offline CPU. I think this supports that the PMU driver should be fixed for ARM, but we'll also need a workaround in the perf tool for older kernels.
Thanks,
Ian
Will Deacon
maintainerQuoted 8 lines · Yicong Yang
From: Yicong Yang <[email protected]>
If user doesn't specify the CPUs, perf will try to open events on CPUs of the PMU which is initialized from the PMU's "cpumask" or "cpus" sysfs attributes if provided. But we doesn't check whether the CPUs provided by the PMU are all online. So we may open events on offline CPUs if PMU driver provide offline CPUs and then we'll be rejected by the kernel:
Quoted 5 lines
[root@localhost yang]# echo 0 >
/sys/devices/system/cpu/cpu0/online[root@localhost yang]# ./perf_static stat -e armv8_pmuv3_0/cycles/ --timeout 100 Error:
Thesys_perf_event_open()syscall returned with 19 (No such device) for event (cpu-clock)./bin/dmesg| grep -i perf may provide additional information.
I still don't see the value in this. CPUs can come and go asynchronously, so this is all horribly racy. Furthermore, there are other (racy) ways to find out which CPUs are online and whatever we do in the kernel now isn't going to help userspace running on older kernels.
Will
Ian Rogers
reviewerQuoted 16 lines · Will Deacon
Quoted 8 lines · Yicong Yang
From: Yicong Yang <[email protected]>
If user doesn't specify the CPUs, perf will try to open events on CPUs of the PMU which is initialized from the PMU's "cpumask" or "cpus" sysfs attributes if provided. But we doesn't check whether the CPUs provided by the PMU are all online. So we may open events on offline CPUs if PMU driver provide offline CPUs and then we'll be rejected by the kernel:
Quoted 5 lines
[root@localhost yang]# echo 0 >
/sys/devices/system/cpu/cpu0/online[root@localhost yang]# ./perf_static stat -e armv8_pmuv3_0/cycles/ --timeout 100 Error:
Thesys_perf_event_open()syscall returned with 19 (No such device) for event (cpu-clock)./bin/dmesg| grep -i perf may provide additional information.
Quoted 4 lines
I still don't see the value in this. CPUs can come and go asynchronously, so this is all horribly racy. Furthermore, there are other (racy) ways to find out which CPUs are online and whatever we do in the kernel now isn't going to help userspace running on older kernels.
Hi Will,
you are assuming here that a counter should be opened on all CPUs. This is true for "core" PMUs for events like "cycles" but isn't true for uncore PMUs. For an uncore PMU on dual socket x86 it may have a cpumask advertising opening on CPUs "0,18". If CPU 18 is taken offline then the cpumask becomes say "0,19". In the perf tool we don't need to determine the topology of the system and see that 19 is next to 18 and online, the PMU driver does it for us. If we intersect the cpumask of an uncore PMU with online CPUs and the cpumask were still "0,18", then we'd end up only opening the event on one socket (for CPU 0).
What the cpumask is providing is the list of default CPUs we want to open the event upon, like a "-C" command line option. Yes this is racy if you are running perf and taking CPUs on and offline, but it's what happens on x86 and we live with it okay. That's not to say we can't do a smarter topology system, cover races with things like BPF, and so on. These things just aren't where the perf tool code is today and could face challenges wrt permissions, older kernel compatibility and so on. In the perf tool code today:
- No cpumask/cpus file was provided on non-hybrid/BIG.little systems
and so such a cpumask is taken to mean open on all online CPUs. If the cpumask exists but is empty then we also do this. I see broken ARM memory controller PMUs with empty cpumask files.
- A cpus file with a list of online CPUs. This is used by core PMUs
on hybrid/BIG.little systems. x86 doesn't place offline CPUs in this file but ARM does. My hope is that ARM can be consistent with x86.
- A cpumask with a list of say one CPU per socket. This is generally
used by uncore PMUs, CPUs not in the cpumask are still valid and are sometimes used to spread interrupt load. The majority of ARM PMU drivers seem broken here, either wrt offline CPUs, not providing a cpumask, etc.
Thanks,
Ian